Problems with colors running CS4 and W7.

Hey everyone.
I'm having some MASSIVE problems with colors on my system.
Windows 7 Prof 64bit
Photoshop CS4 64bit
6g Ram
1T hard drive
Nvidia GeForce 9800 GTX+
Dell SE198WFP Monitor
The system itself is a Dell Inspiron 530 that I put into a Black Widow V9 gaming tower.
Here is an example of the issue I'm having:
http://findae.deviantart.com/art/Converge-101214480
http://i38.tinypic.com/bjcymr.jpg
The top image is a (admittedly old and crappy, but it shows the problem) photo that I had previously edited and put in my portfolio. The tinypic below is the result of copying that photo from the portfolio, pasting it into photoshop, and then saving it into a jpg. As you can see, the transitions between colors and the contrast are a complete mess.
Thing is, my hard drive recently quit on me, and I had to install the operating system and such on a new drive. I remember having this problem with the system when I first had it, but it either went away on its own or I fixed it somehow before. Now I can't remember for the life of me how I got rid of the problem, and I certainly don't know what the problem is in the first place. I'm tempted to think it may not be photoshop itself, but the problem seems to be especially bad when I'm working with photos.
Anyone have any idea what the problem might be and how to solve it?
Edit: I also noticed it when viewing http://findae.deviantart.com/gallery/#/d1hni37 in firefox, whereas the other photo appeared to be ok before I copied and pasted it. It has extremely obvious lines of green and orange in the transition from light skin tone to dark skin tone. Annoyingly enough, this doesn't show up in the thumbnail within my gallery at all, only when I click on the thumbnail and see the fullsize image. Extremely frustrating.
Here's another good look at the problem while selecting a color in photoshop: http://i37.tinypic.com/2h6t7gh.jpg All I did was screenshot it a few times, and it deteriorated to that point.

Screen glitches like color blocks appearing where they shouldn't could indicate a problem with your video drivers.
Go to the nVidia site and see if they've released any updated drivers; people often report that updated drivers are correcting current problems with Photoshop.
http://www.nvidia.com/object/win7-winvista-64bit-258.96-whql-driver.html
Note the recent (3 weeks ago) release.
-Noel

Similar Messages

Problem with ExtendScript Toolkit CS4 and Debugger (32bit)

Help needed. Whenever I tried to edit my script I always have "ExtendScript Toolkit CS4 and Debugger (32bit) has encountered a problem and needs to close" error.
Thank You.

Yes, it's a known issue and they are working on it.
Thanks
Bob
Adobe WAS Scripting

Problem with permissions, running programs and installing programs.

I've been having trouble installing and running programs. Whenever I try to install a new program I have to make sure to right-click and select "Run as Administrator", which is something that didn't happen before. And while running programs, sometimes
they don't work well (i.e. dropbox alerts me that it cannot run because of permission issues; calibre needs to run with Administrator level, otherwise it won't open my ebooks; the list goes on).
I tried using the elevated command prompt and typin secedit
/configure /cfg %windir%\inf\defltbase.inf /db defltbase.sdb /verbose to reset the permission settings, and it does not work (it tells me that some ignorable warnings occured).
There's only one account in this machine and it has administrator level.
Any thoughts?

1. First of all, it is a bad habit to work with administrator account only. Use standard user account where programs allows for it.
2. For third party programs contact respective support/forums. Some programs are not written in right way and may need admin account. I would avoid such programs.
3. Elevated rights (Run as Administrator) is natural enhancement that comes with Windows version 6.x
4. If you want to play risky role, disable UAC (not recommended). Step-by-step is here:
http://www.petri.com/disable-uac-in-windows-7.htm#
Regards
Milos

Hi I have been having a problem with Bridge in CS4 recently. So uninstalled CS4 and Lightroom 4.4 and reinstalled them on my Desktop PC. When I turned on Bridge through CS4, My thumb nail images disappeared and a thumb nail icon with CR2 appeared. Now som

Hi I have been having a problem with Bridge in CS4 recently. So uninstalled CS4 and Lightroom 4.4 and reinstalled them on my Desktop PC. When I turned on Bridge through CS4, My thumb nail images disappeared and a thumb nail icon with CR2 appeared. Now some of my images have disappeared from Light room 4.4, but I can find them in CS4 and Bridge now shows some thumb nails as images and some as an icon with CR2. I have spent two weeks going through preferences etc. to find how to resolve my problem. Please can you Help? Meany thanks in advance
Derek Randall

I don't use LR and rarely use the bridge so I can not answers about thumbnails in them, However thumbnails in windows file explorer and windows dialog for CS2 files will only show if you have installed codec into windows that will produce them. Windows does not do CR2 thumbnails on its own. I use FastPictureViewer Codec package for RAW File and PSD files thunbmail support.

I have a problem with color prints from photoshop elements 12. The pictures are too light and with strange colors. I have a Canon pixma mg615I0 printer and use mac os X yosemite. The pictures are taken with a coanon eos 550d in the color space sRGB. I hav

Hi
I have a problem with color prints from photoshop elements 12. The pictures are too light and with strange colors. I have a Canon pixma mg615I0 printer and use mac os X yosemite. The pictures are taken with a coanon eos 550d in the color space sRGB. I have followed adobes recommendations and have tried both letting the printer respektive photoshop manage the colors. But nothing works. I see that there are different opinions about which is best to do so I tried both. I have the latest printer driver installed. Can anyone help me with this?

Do the following:
Print a test page from the printer. Perhaps the print head needs cleaning via its maintenance facility.
Let the printer manage colors, not PSE
Calibrate the monitor

I'm having problems with videos, they shake and the images break up back and forth into striped colors, how do I fix this?

I'm having problems with videos, they shake and the images break up back and forth into striped colors, how do I fix this?

1) This is because of software version 1.1. See this
thread for some options as to how to go back to 1.0,
which will correct the problem...
http://discussions.apple.com/thread.jspa?threadID=3754
59&tstart=0
2) This tends to happen after videos. Give the iPod a
minute or two to readjust. It should now be more
accurate.
3) This?
iPod shows a folder icon with exclamation
point
4) Restore the iPod
5) Try these...
iPod Only Shows An Apple Logo and Will Not Start
Up
iPod Only Shows An Apple Logo
I think 3,4, and 5 are related. Try the options I
posted for each one.
btabz
I just noticed that one of the restore methods you posted was to put it into Disk Mode First rather than just use the resstore straight off, I Have tried that and seems to have solved the problem, If it has thank you. previously I have only tried just restoring it skipping this extra step. Hope my iPod stays healthy, if it doesnt its a warrenty job me thinks any way thanks again

I have 64 bit windows 7 and CS4 Production Premium. I have a problem with Premiere Pro CS4, it keeps

I have 64 bit windows 7 and CS4 Production Premium. I have a problem with Premiere Pro CS4, it keeps freezing and Crashing. A simple thing like leaving the project idle for about 15 minutes, you come back and find that it has frozen. Also if you drag out a clip on the timeline you will find that the whole application freezes. Any possible solutions would be much appreciated.

Could be several factors at play here. This ARTICLE might give you some tips on getting your computer ready for an editing session. Note that there are some added tips on Win7, thanks to Black Viper, near the end.
If nothing is helping, then the tips in this ARTICLE might help you find some clues amongst the breadcrumbs left behind with a hang, or crash.
The link in this ARTICLE will give you some general troubleshooting tips.
If nothing improves, then please post back with more details. This ARTICLE will give you tips on what would be helpful.
Good luck,
Hunt

I'm running CS4 and use a Canon T3i to shoot RAW. Which camera raw patch do I need?

I'm running CS4 and use a Canon T3i to shoot RAW. Which camera raw patch do I need? I get his error when trying to install the latest patch: "Adobe Application Manager is needed to resolve this problem, however it is missing or damaged. Download a new copy of Adobe Application Manager or install this product again."

If the camera is newer than the last version of Camera Raw that was released for an older version of Photoshop, you won't be able to get direct, convenient "open file" support for the raw files.
You can check per these links:
Minimum Camera Raw version required for a particular camera:
Camera Raw plug-in | Supported cameras
Camera Raw versions available for update with various Photoshop releases:
Camera Raw-compatible Adobe applications
Just glancing at those links, Photoshop CS4 can update to only as far as Camera Raw 5.7. Unfortunately, the minimum required version to work with your T3i is Camera Raw 6.4.
Your fallback position will be to either convert your raw files to DNG format with the latest free DNG converter release, or get a newer version of Photoshop. The later has an advantage in that there have been substantial improvements to Camera Raw in recent releases.
-Noel

Java update causes problems with color printing in Mac 10.5

Had a big problem with color printing for the last two weeks. Thought the printer was broken because it would freeze and refuse to be "seen", or would generate error messages. Bought new Samsung 315, and had the SAME problem. Bought new HP CP1518ni, and had the SAME problem. Not resolved after talking to tech support at both places.
Looked for software updates around the time of the onset of printing problems. on May 15 installed "Java for Mac OS X 10.5 update" (1.0) (am running on 10.5.8). Removed the Java preferences files (com.apple.java......plist) and restarted.
Problem solved! Clearly not the printer.

Hmmm. This is about the time my printer stopped printing too. I've now had two printers in my house and had trouble with both of them. What a pain we should not have to delete updates for our stuff to work together.
Renee

Problem with java swing button and loop

Problem with java swing button and loop
I�m using VAJ 4.0. and I�m doing normal GUI application. I have next problem.
I have in the same class two jswing buttons named start (ivjGStart) and stop (ivjGStop) and private static int field named Status where initial value is 0. This buttons should work something like this:
When I click on start button it must do next:
Start button must set disenabled and Stop button must set enabled and selected. Field status is set to 1, because this is a condition in next procedure in some loop. And then procedure named IzvajajNeprekinjeno() is invoked.
And when I click on stop button it must do next:
Start button must set enabled and selected and Stop button must set disenabled.
Field status is set to 0.
This works everything fine without loop �do .. while� inside the procedure IzvajajNeprekinjeno(). But when used this loop the start button all the time stay (like) pressed. And this means that a can�t stop my loop.
There is java code, so you can get better picture:
/** start button */
public void gStart_ActionEvents() {
try {
ivjGStart.setEnabled(false);
ivjGStop.setEnabled(true);
ivjGStop.setSelected(true);
getJTextPane1().setText("Program is running ...");
Status = 1;
} catch (Exception e) {}
/** stop button */
public void gStop_ActionEvents() {
try {
ivjGStart.setEnabled(true);
ivjGStart.setSelected(true);
ivjGStop.setEnabled(false);
getJTextPane1().setText("Program is NOT running ...");
Status = 0;
} catch (Exception e) {
/** procedure IzvajajNeprekinjeno() */
public void IzvajajNeprekinjeno() { //RunLoop
try {
int zamik = 2000; //delay
do {
Thread.sleep(zamik);
PreberiDat(); //procedure
} while (Status == 1);
} catch (Exception e) {
So, I'm asking what I have to do, that start button will not all the time stay pressed? Or some other aspect of solving this problem.
Any help will be appreciated.
Best regards,
Tomi

This is a multi thread problem. When you start the gui, it is running in one thread. Lets call that GUI_Thread so we know what we are talking about.
Since java is task-based this will happen if you do like this:
1. Button "Start" is pressed. Thread running: GUI_Thread
2. Event gStart_ActionEvents() called. Thread running: GUI_Thread
3. Method IzvajajNeprekinjeno() called. Thread running: GUI_Thread
4. Sleep in method IzvajajNeprekinjeno() on thread GUI_Thread
5. Call PreberiDat(). Thread running: GUI_Thread
6. Check status. If == 1, go tho 4. Thread running: GUI_Thread.
Since the method IzvajajNeprekinjeno() (what does that mean?) and the GUI is running in the same thread and the event that the Start button has thrown isn't done yet, the program will go on in the IzvajajNeprekinjeno() method forever and never let you press the Stop-button.
What you have to do is do put either the GUI in a thread of its own or start a new thread that will do the task of the IzvajajNeprekinjeno() method.
http://java.sun.com/docs/books/tutorial/uiswing/index.html
This tutorial explains how to build a multi threaded gui.
/Lime

Problem with colors showing in PE10

Is there a known problem with color in Elements 10?
I have a gif that when opened in paint shows the light blue color correctly but in PSE10 shows as a buff color.
Red, yellow and blue seem about right.
It doesnt matter if it is the gif or the psd file the color showns the same in PSE10.
Is there a setting or could something be corrupted.

Bump.
I have uninstalled and reinstalled Elements and get the same result.
Is there a way to adjust the colors represented in Elements 10?

I have a problem with the effect gallery and the saving libraries in Illustrator CS6

Hi everybody
I have a problem with the effect gallery and the saving libraries in Illustrator
1. When you go to to effects > effect Gallery the the sketch filter always is black and white. Is this normal? In Photoshop you can set your background and foreground and the sketch effects takes those colors. Is there any way to do this in Illustrator? I have tried changing the colour of the fill and stroke but nothing...
2. In the same area as before effects > effect Gallery .... In Photoshop you can add multiple filters with the create new button. Always is off is there anyway to make it available? or the only way is to by creating several individual ones and manage then in the appearance panel ...
3. I saved a brush library and now it appears in the user defined area so I can get it in any document, that is good but any one knows how to delete a user undefined library?
Many thanks in advance for the help .... I look forward for the reply =)

I see that it is six months ago that I first posted this. Nothing has changed. When I use affixa to create a message with an attachment from my gmail account in firefox, the message is created in drafts, but the gmail window is closed and I have to re-open it. Not critical, but annoying.
Now there is a plug-in on the affixa site that is supposed to be designed for Firefox, and which affixa support claims should take care of this. And I've downloaded it twice. When you download it and open it, it says that it will be installed when Firefox restarts, and gives you a button to restart Firefox. But after you click that button and firefox disappears and re-appears, the affixa plug-in is NOT in the plugin list.
Please, somebody, HELP.

Strange problem with color measure in Mac.

Hello, I am having a strange problem with color measure in Mac. For example i create a gradient in Photoshop from color 200 200 200 to color 240 240 240. When i measure the color of the gradient with the color measure tool of Photoshop or with the built in OS X color measure tool the measured color is from 200 199 197 to 240 240 238. I have measured the same gradient with Photoshop for PC and the values are OK (the same values that i create).
I dont know what is the problem, but i belive that the colors that i create would be the same that i measure after creating them, and also the same values between Mac and PC. I will appreciate it a lot any help or information that you could give me that helps me to understand what is happening here.
Thank you for your time
Marcelo.

Yep you got it, proof as monitor basicaly strips out any profiling and just delivers it straight.
is there any way to make the OS X color measure tool to measure the original color values
You mean the document colors - No, like I said photoshop is filtering your image through document profile, proof setup and monitor profile. Why do you want to use Digital color meter anyway for this?
i dont understand what is the point to measure color values that will change every time a calibrate my monitor.
Because color values are 'bigger' than whats on your monitor. Your monitor (via photoshop) is only doing the best it can to display those values - which can be anything from LAB colors outside the gamut of your monitor - to CMYK colors. Calibrating it is the only way to allow your monitor to do this in any way accurately. (not ever really possible) Monitors have a certain gamut and are only dispays/representations of the REAL colors that a document, with a profile, holds. So there's only one good reason to measure monitor values, and that's to generate a monitor profile.

Strange problem with SQLPLUS when client and server on the same box

Hi,
I have the problem with SQLPLUS when clinet and server on the same machine.
With client and server on the same machine i am running the command
sqlplus -l username/password@connect_identifier as SYSDBA.
With this command, even if you pass in wrong username or wrong password or both as wrong you can able to connect to database and execute queries.
Once Connect_identifier is correct and trying to log in as SYSDBA ,sqlplus will log in to DB with any username and password.
How to get rid of this behaviour. Is there any way to do this.
I am running this command by creating a process in C#
Edited by: user11000236 on Jun 16, 2009 10:31 AM

user11000236 wrote:
Thanks for the info.
How does Oracle/SQLPLUS allows any username or password to log in to DB with SYSDBA Privillages? What is the concept behind this.?
This is explainted in the above mentioned link:
Operating system authentication takes precedence over password file authentication. If you meet the requirements for operating system authentication, then even if you use a password file, you will be authenticated by operating system authentication.

I'm Having problems with the video freezing and the sound carrying on since I up graded my iPad to ios8 BBC IPLAYER

I Am having problems with the video freezing and the sound carrying on whilst watching BBC IPLAYER ITV PLAYER until I reboot video and the problem acures again

Your Mac runs maintenance in the background for you.
Command + R gives you access to restore, repair, or reformat the drive using OS X Recovery
No idea why that was suggested.
You may have a third party video player installed that's causing an incompatibility issue.
Check these folders:
/Library/Internet Plug-Ins/
/Library/Input Methods/
/Library/InputManagers/
/Library/ScriptingAdditions
~/Library/Internet Plug-Ins/
~/Library/Input Methods/
~/Library/InputManagers/
~/Library/ScriptingAdditions
The first four locations listed are in the root-level Library on your hard disk, not the user-level Library in your Home folder.The tilde (~) represents your Home folder.
To access the Home folder in OS X Lion or Mountain Lion, open the Finder, hold the Option key, and chooseGo > Library.

Problems with colors running CS4 and W7.

Similar Messages

Maybe you are looking for