Problems with connecting my ipod to computer

Please, i need help. I had my ipod and itunes running fine on a windows xp computer service pack 2 and last weekend i got a new computer. However, i simply transferred my old hardrives into the new computer. The only thing that changed was the letter of the drive. Instead of being E: drive it is now an F: drive.
The problem i am having is that i get an error message everytime i connect my ipod to the new computer and load up itunes It says "the software required for communicating with the ipod is not installed correctly. Please reinstall itunes..."
So when i try to reinstall itunes i get error 1324 "the path ipod updater 20006-06-28 contains an invalid character."
I've tried downloading itunes from the website and when it tries to install i get "ipodservice.resources is not a valid short file name."
So, i can't uninstall itunes or ipod, i've cleaned up my computer for any remnants of files in the system, and i've checked the registry to make sure no files were still being directed towards the E: drive.
Itunes right now works fine. The only problem is that my ipod doesn't update any music or properly connect with itunes.
I've run out of options and need help. Also, if there is a better forum to post this in please tell me. thanks.
  Windows XP  

Hello drkhntrss,
And welcome to Apple Discussions!
Maybe trying reassigning your iPod's drive letter as described in this Apple support document and see if that helps.
http://support.apple.com/kb/TS1493
B-rock

Similar Messages

  • Problem with connecting my Ipod Classic 80 gb to a Phillips Portable DVD

    I just purchased a Phillips Portable DVD player that I can insert my ipod into.
    It plays music, but everytime I go to play a movie it keeps coming up withTV OUT ENABLED, PLEASE CONNECT VIDEO ACCESSORY. I have set all the proper settings
    TV OUT - ON
    TV SIGNAL - NTSC
    TV SCREEN - STANDARD
    When I click on the source button it plays the sound but no picture appears on the screen.
    Any idea what is happening.
    I took the Phillips DVD player back to the store and their technician plugged in his older ipod and it works.
    Any help on this would be greatly appreciated.

    If you have a new enough iPod, they are now requiring an apple adapter that has the apple computer chip in it to work. I did a general search on the web and came up with better info than here.

  • Zen Sleek Photo - Problems with connecting device to the comput

    My zen sleek photo gives me this error message when I try to transfer nusic from Napster "Your portable device has stopped responding. To restart your transfer, please disconnect and reconnect your device. Tracks will begin transferring when the device is connected."?I have tried disconnecting and reconnecting, this does not work. I have also tried the recovery mode using the Clean up and reboot options. I am afraid to try Format and Reload Firmware, since my MP3 player continues to stop responding. I have also tried?installing Creative Zen Sleek PlaysForSure Firmware 2.0.03 and I get this error message "Your player is not connected please connect your player."? Disconnecting and reconnecting does not work here either. I was successful in initially transferring about 50 - 75 songs from Napster. I have also been able to and still can'transfer music from cd's to my MP3 player. It?appears as though Creative Media Explorer, Creative Media Source Player and?Creative Media Source Organizer are all operating OK with my MP3 player. Could my problem be related to MTP?Any Ideals?ThxRoger Conejo

    Can you transfer songs using Media Source, or Media Explorer? Yes, does not work.
    What do you mean by this? Can you transfer songs using these programs yes or no?
    Sorry, no I can't transfer music. You would first have to let WMP scan the folder where the songs are. Once they are in your Library section right click the songs and choose Add to Sync List. Then click on the Sync tab and click on Start Transfer and it should transfer over. After choosing Add to Sync List. Then click on the Sync tab and click on Start Sync I get this error message from WMP "Windows Media Player cannot access the file. The file might be in use, you might not have access to the computer where the file is stored, or your proxy settings might not be correct."?Then I click More Information and get this message from the WMP Error Center?[img]mk:angry:MSITStore:C:\WINDOWS\Help\wmperr0.chm::/wmedia.gif" alt="Windows Media Player banner art[/img] height="65" width="400"><!-- HEADGRAPH_END --><!-- Document last modified on Friday, July 30, 2004 at :27 AM -->]C00DD2: Cannot access the fileWindows Media Player cannot access the file. You might encounter this error message for one of the following reasons:
    This file is currently in use. Close the file, and then try again.<
    You do not have permission to access the server or other location where the file is stored. Verify that you have the appropriate access rights, and then try again.<
    You do not have permission to access the proxy server. Verify that you have the appropriate access rights, and then try again.<
    If you are trying to rip (copy) a track from a CD to your hard disk, you might not have permission to rip to the specified hard disk location. Verify that you have the appropriate access rights, and then try again. If the problem persists, try ripping to another folder.<
    To change the folder where tracks are ripped to
    On the Tools menu, click Options.<
    Click the Rip Music tab.<
    Click the Change button.<
    Select another folder in which to store your digital media files, and then click OK. or-
    Click Make New Folder, enter the name of the new folder, and then click OK.
    <
    Web Help[/u]
    <hr size="">?I've tried all of the above, still not working.

  • Problems with iTunes and iPod running under Windows Vista

    I recently changed my computer. I now have an HP Pavilion running windows Vista (use to have XP). I have a video iPod -30GB. I downloaded iTunes onto the new equipment without incident, but that is the last thing that went smoothly.
    I can no longer watch TV shows or movies from iTunes. The video plays like a slide show of stills (the audio is real-time however). Eventually I will get an error message from Windows and it closes the application.
    I am also having issues with syncing my iPod and computer. I get a message requiring me to delete all of the content of the iPod and replace it with the contents of iTunes. I haven't done this -no trust and no backup
    The delete message is from iTunes. I suspect it is a security feature to prevent downloading to more than one iPod, as iTunes doesn't seem to 'know' my iPod anymore. Syncing has also caused iTunes to close and my computer to reboot. Has anyone else had these problems?
    HP Pavilion   Windows Vista  

    you may want to take a look at the iPod 101 tutorials. Those might help.
    Regards.
    < Edited by Host >

  • Connecting new ipod to computer

    The screen on my current ipod has cracked, i am guessing i will get a new one from the shop where i purchased mine (not apple) even if i just get a repair under the terms of their extended garantee will i just be able to attach my new ipod to the pc and redownload all my stuff on itunes to it? Many thanks for your help
    ipod 30G video   Windows XP  

    Chris CA;
    I am sorry the words before were to harsh ; I apologize and will admit I made a mistake with my words and also the post was accidental and did not apply at all to the :
    connecting new ipod to computer
    Posted: Feb 14, 2007 6:56 AM
    I never even read the post to respond to it; just seem to me it was pretty obvious that
    It had no connection or made sense to that post!!!

  • Connecting new ipod to computer already programed w/ ipod shuffle

    Help, I'm dumb. I was given an ipod shuffle a while back. Installed it, loved it, bought a bigger, better one, but can't use it yet. Can't get my itunes program on computer to recognize that I have a new ipod. How can I make computer w/ ipod shuffle already installed work with NEW video ipod. Help.

    Chris CA;
    I am sorry the words before were to harsh ; I apologize and will admit I made a mistake with my words and also the post was accidental and did not apply at all to the :
    connecting new ipod to computer
    Posted: Feb 14, 2007 6:56 AM
    I never even read the post to respond to it; just seem to me it was pretty obvious that
    It had no connection or made sense to that post!!!

  • Experiencing problems with connecting my iPhone 6plus to my Hyundai sonata phone kit via Bluetooth, Experiencing problems with connecting my iPhone 6plus to my Hyundai sonata phone kit via Bluetooth

    Experiencing problems with connecting my iPhone 6plus to my Hyundai sonata phone kit via Bluetooth, Experiencing problems with connecting my iPhone 6plus to my Hyundai sonata phone kit via Bluetooth

    Hello NiiTeye,
    I'm sorry to hear you are having these issues with your iPhone. If you are having issues connecting to your car stereo via Bluetooth, you may find the troubleshooting steps outlined in the following articles helpful:
    Get help using your iPhone, iPad, or iPod touch with your car stereo - Apple Support
    iOS: Troubleshooting Bluetooth connections - Apple Support
    Sincerely,
    - Brenden

  • I am having problems with connecting to my router wireles...

    I am having problems with connecting to my router wirelessly.  How do I determine my access point's network key?

    Follow this from a computer already connected: 1. Open setup page of router by typing http://192.168.1.1 in browser’s address bar, and typing password as "admin" and no user name. Use your password if you have changed it earlier. 2. Go to wireless tab. 3. Go to wireless security sub-tab. 4. If security mode is wpa or wpa2 note down pass phrase/shared key, if security mode is WEP note down wep key number 1. This will be your network key.

  • Contribute 3: Problem with Connection Key

    Hi,
    I'm having a problem with connecting Contribute 3 to our web
    site.
    I have Contribute running on two PC's, one running XP Pro
    Service Pack 1 and the other Service Pack 2, the one with SP 1 is
    at home and connects fine. I used this one to generate a connection
    key for my office computer (the one with SP2). Everything should be
    fine, but it isn't.
    The office PC refused to connect to the site: After double
    clicking on the connection key and selecting Open, it presents a
    dialog box with the name: Import Connection Key, and I enter a new
    username, email and the password for the connection key.
    When I click OK, it presents the following message: "Unknown
    host. Contribute could not find the server "ftp.myhost.com". Please
    check your connection information or contact your administrator."
    When I click OK on this dialog box, it presents the following
    dialog box: "Contribute could not verify your connection key. A
    network connection to the server could not be established. Please
    contact your administrator for assistance." Damn,I'm the
    adminstrator and I have run out of ideas!
    I can connect to the site with WS_FTP without any problems,
    but I cannot do so with Contribute, neither with the connection key
    containing all the FTP details, nor bypassing the connection key
    and simply manually entering the FTP details.
    What is going on

    which windows version do you have? 
    connect your phone to your PC > disable your firewall and antivirus > your PC should download the drivers also you might want to try SUS 
    Update Service (SUS)
    PC Companion (PCC)
    Bridge (for Mac)
    Alternatives on How to backup Xperias
    http://talk.sonymobile.com/thread/36355
    "I'd rather be hated for who I am, than loved for who I am not." Kurt Cobain (1967-1994)

  • Problems with iTunes downloading songs to computer

    Problems with iTunes downloading songs to computer. I hook up my iPhone as well as my Ipod and it does not download the new content on my computer.

    with that one we'd better check on these possibilities:
    You can't import or play music from an audio CD in iTunes for Windows
    these resources might be helpful with that:
    Using CD Diagnostics in iTunes for Windows to troubleshoot CD/DVD drive issues
    iTunes for Windows: Updating the firmware on your CD or DVD drive
    Updating the drivers on your Windows PC
    Where to find firmware for your CD/DVD drive

  • When I connect my ipod to computer and open itunes, the songs on my ipod do not show up on the itunes library...it is blank...songs are still on my ipod but don't seem to show up on computer..help??

    When I connect my ipod to computer and open itunes, the songs on my ipod do not show up on the itunes library...it is blank...songs are still on my ipod but don't seem to show up on computer..help??

               Download this for getting media off your ipod!http://www.macupdate.com/app/mac/19890/ipoddisk
    Hope this helped!

  • Problem with connecting and syncing   (quicktime.qts)

    Hi,
    I have a problem with connecting and syncing my Iphone to itunes.
    iphone alone on PC -> uploading files (fotos) is possible
    itunes starts normaly, if iphone is not conected.
    if i connect iphone after starting itunes, or if i start itunes after connecting iphone i get an itunes-error with message:
    AppName: itunes.exe AppVer: 9.0.2.25 ModName: quicktime.qts
    ModVer: 7.65.17.80 Offset: 00909a47
    i test different things...
    - used another USB-port
    - used another PC
    - used macbook of my wife instead PC
    - deinstalled and new installed of itunes (older and newer versions) folow tutorials of apple
    - use another USB-Cable...
    I'm resigned, Please help me..
    Tom

    AppName: itunes.exe AppVer: 9.0.2.25 ModName: quicktime.qts
    In this context, that can sometimes indicate trouble with a content file on the phone (or Touch).
    Do you have any podcasts stored on the iPhone at the moment? If so, if you delete them from the phone, can you connect to iTunes without the error?

  • HT204053 I have a problem. I bought Pages and Numbers for my iMac and so far everything was OK.  Suddenly i have a problem with connection to iCloud. Dokuments created on iMac in Pages or Numbers are not transfered to iCloud. Not uploaded in iCloud.

    I have a problem.
    I bought Pages and Numbers for my iMac and so far everything was OK.
    Suddenly i have a problem with connection to iCloud.
    Dokuments created on iMac in Pages or Numbers are not transfered to iCloud. Not uploaded to iCloud. There is a sign  (small shape of iCloud), that they are waiting to be uploaded to iCloud.
    I think the iCloud is OK.
    i can see and manage documents in iCloud. i can create them on iPad and  see them and delete them in iCloud.
    But not on iMac.
    i dont know what has happened and I am not abble to find the solution. It was OK till some days ago….

    I have a similar problem! Everything stopped working after upgrading to Mac OS 10.8.4 through the App Store. Help!

  • Problem with connecting to free wifi after upgrading to Windows 8.1 from Windows 8

    Hi
    I had problems with connecting to free Wifi after upgrading my PC(Notebook) to Windows 8.1 from Windows 8. As I travel a lot within europe, I am used to being able to connect to Free Wifi(those that dont need a key or password to enter) but soon after downloading
    Windows 8.1 I almost never was able to do this. I'd always get «LIMITED» even though the signal was strong.This was so fustrating,so much so that I reset my PC to clear it of Windows 8.1 and am now back to Windows 8.This is a shame because I was really liking
    using Windows 8.1 and if not for this problem(which is a big one) I'd still be using it. If I download Windows 8.1 again from the Windows store what is the probability that I'll have the same problems?
    Thanks Portozzygirl

    More often than not when a device isn't working it is because the driver has become corrupted. Re-installing a fresh copy should help
    http://windows.microsoft.com/en-us/windows7/Update-a-driver-for-hardware-that-isnt-working-properly?SignedIn=1
    http://captaindbg.com/how-to-update-drivers-on-windows-7/   (works on win 8 too)
    Wanikiya and Dyami--Team Zigzag

  • Problems with syncing my ipod

    Yesterday I updated my iPod tot 1.1
    After that it had that crappie bug with the video's, so I downgraded my iPod. After that I updated it again tot 1.1
    Now I have a problem with syncing my iPod (video's only).
    First I had some series it synced with my iPod, also after the first update. But after the second update it tells me there are some files it couldn't sync. (some videos it did sync btw, and the problem with the sound has gone, I can play movies normal now!)
    So the problem is now that it doesn't sync all my movies anymore, and I converted all of them with the same program..
    Anyone has the same problem or knows how to solve?

    Mijn advies: terug naar versie 1.0. Tenzij je versie 1.1 nodig hebt, natuurlijk (voor radio o.i.d.). Of wachten op versie 1.2
    Ik heb zojuist versie 1.0 geherinstalleerd, en alles werkt nu prima. En telkens als iTunes vraagt of ik de nieuwste versie wil installeren klik ik op NEE.

Maybe you are looking for

  • Question about capturing ProRes HQ from D5

    I routinely capture 10bit uncompressed video from HDSR or D5 to FCP thru a Kona 3. Yesterday, I captured from the D5 (1920x1080 23.976psf) directly to ProRes HQ using the AJA Kona 1020x1080 23.98sf capture preset. The captured ProRes HQ format came i

  • After Update ATV Displays Only Part of Picture

    After the new update- 12/2/2010 when I try to sync photos over Home Sharing and show them as a slideshow it shows only some of the picture- the rest of the image is grey like in the old days when you would only get part of an image on a slow modem.

  • UNION ALL: converting all columns to_char

    I have a union all statement. I want to convert all the fields to character using to_char. Is there any quick way to do this or do i have to put to_char before each field?

  • Cannot read pre-view cache

    At startup I get failure message "cannot read from pre-view cache (förhandsvisningscache in Swedish)" every time. According to the message, the failure is supposed to be rectified at next start-up, but this has not happened. I simply cannot start Lig

  • Application Express 3.2.1 post installation problem

    I upgraded Oracle database XE with Application Express 3.2.1 The installation was succesfull. The logfiles contains the text: Thank you for installing ... etc The post installation tasks give me some problems. As I upgraded from Oracle Database XE, I