Problems with connection between nintendo wii and cisco 871w.-
Dears,
I have a problem connecting my Nintendo Wii via wireless with a cisco 871w.
I tested with different encryption (WEP, WPA2 and open) to no avail.
The console gives me errors when testing the connection (number 51 330).
Any other device I connected to the wireless network works flawlessly (Notebook, iphone, nokia phones)
The network configuration to be open is:
ip dhcp pool VLAN20
import all
network 192.168.2.0 255.255.255.0
default-router 192.168.0.1
dns-server XX YY
lease infinite
dot11 ssid Wii
vlan 20
authentication open
ssid guest-mode
interface Dot11Radio0
no ip address
ssid Wii
speed basic-1.0 basic-2.0 basic-5.5 6.0 9.0 basic-11.0 12.0 18.0 24.0 36.0 48.0
54.0
channel 2462
station-role root
I change the channel, the encryption. Leave the console with fixed ip, not works!
Thanks for your help.
Please show me what commands you used to make these changes.
Thanks!
Mi config:
interface Dot11Radio0
no ip address
no dot11 extension aironet
encryption vlan 10 mode ciphers tkip
encryption vlan 20 mode ciphers tkip
ssid Agrolate
ssid Pamelie
mbssid
speed basic-1.0 basic-2.0 basic-5.5 basic-6.0 basic-9.0 basic-11.0 basic-12.0 basic-18.0 basic-24.0 basic-36.0 basic-48.0 basic-54.0
channel 2462
station-role root
no cdp enable
Similar Messages
-
HT204368 Problems with connectivity between iPhone 4S and Jawbone!!
I have a Jawbone bluetooth headpiece. Recently I have had problems with intermittent connectivity with my iPhone 4S. The Jawbone is searching for the phone but sometimes it doesn't connect and when it does it will lose the connection after a few seconds. This is a serious problem since I use it when I'm travelling on business. I have installed the latest software updates in both devices, unpaired and repared and also reset the Jawbone. Any ideas?
Basics from the manual are restart, reset, restore
Follow the 3R's- if a restart does not solve your problem proceed
User troubleshooting is:
1.restart, ie power off/on,
2. reset http://support.apple.com/kb/HT1430,
3. restore from backup, restore as new device. http://support.apple.com/kb/HT1414 -
my host name changes every few days, since Xmas adding a macbook its changed 6 times. Do I need to stop this? Does it cause problems with sharing between the iMac and macbook?
There are several possible causes for this problem.
1. Two (or more) computers on the local network have the same Bonjour name, such as "X's-MacBook-Pro.local".
2. You have two simultaneous connections to the same local network: probably Ethernet and Wi-Fi. If applicable, disconnect the Ethernet cable or turn off Wi-Fi.
3. A Mac wakes from sleep due to network traffic. This is due to a bug in OS X that may only affect some models.
4. A device that gets its network address from the router wakes from sleep, and the address it was using before has been assigned to another device.
5. A third-party wireless router has incompatible settings or firmware. In that case, refer to the manufacturer or ISP for support. Restarting the router may help, temporarily.
6. See also this support article.
Rename the computer in the Sharing preference pane. -
(Trouble printing) Trouble with connection between Macbook Pro and Hp Deskjet 1510.
Trouble with connection between Macbook Pro and Hp Deskjet 1510. (Nothing Prints).
I have a Macbook Pro and am having difficulty printing documents from ‘Pages' from my Hp Deskjet 1510. I have installed the necessary software for the printer and it is connected via USB. Every time I try to print the printer icon comes up as it should, 'printing' and then 'job completed' and then the icon disappears. (Nothing is printed.) I thought it might be something to do with Pages compatibility with the printer but exporting the document to Word or making it a PDF doesn’t change anything. I don’t have Microsoft Word on my computer. The scanner does work and when I printed a ‘Test Page’ that worked too.
Let me know if you know why this is happening.With these settings the network now works flawlessly, however, when i have my ethernet cable plugged in, my internet access via my airport card(on the macbook pro) is no longer available. Hoping you can tell me why this would be with this info i've provided.
Educated guess. The networking devices have priorities as to which are used. The standard order is that Ethernet has a higher priority than Airport.
While your Ethernet is unplugged it is inactive and the Mac ignores it. Once you plug it in, the Mac sees that it is active and switches traffic to that interface.
I actually take advantage of this feature at home, but configuring my Airport and Ethernet with identical fixed IP addresses. Normally I'll use Airport, but if I'm copying a huge file and I want faster performance, I'll just walk my MacBook (previously iBook, previously Powerbook) over to my Ethernet switch and plug in my MacBook. Magically, the Mac detects that the Ethernet is active and continues the file transfer uninterrupted over the faster 100baseT Ethernet connection. When the transfer is finished, or if I really need to move back to the Comfy Chair, I unplug the Ethernet cable, and all activity reverts back to the Airport, all without disrupting any existing networking connections.
You on the other hand have totally different settings for your Ethernet and your Airport, so when you switch to Ethernet, you basically loose your Airport connections.
Something you can try:
System Preferences -> Network
Gear icon on the bottom left, next to the [+] [-] icons.
Select *Set Service Order...*
Now Drag the network interfaces into the perfer priority order you want. In this case put Airport above Ethernet.
NOTE: You may want to create a new Network Location for this, instead of messing with your normal home Location (which is most likely the default Automatic. That way you have your original you can always fall back to. -
Connecting to Nintendo Wii and DS?
I was planning on purchasing a Nintendo WiFi USB connector for use with my iMac before learning that it is only compatible with Windows XP (and not Windows Vista, either.) Apparently my other option is to buy a wireless router, but this would be solely for gaming because I don't have another computer to network with in the house. My question is: Is there a special type of router I need for this situation, and what is the cheapest (but still functioning) possible one I can buy? Any ideas? Thanks!
Yeah, you can internet share your Mac and Wii/DS. You will need to have the airport express card in your Mac. It should have one if its new, if your not sure check your system profiler. Go under airport, you should have airport card there.
You will also need an ethernet cord. This is rather lengthy and copied from another post, so yeah.
First you need to go to the system prefrences panel. Click the sharing folder icon.
Under sharing, go to the internet tab. Go to the drop down menu and click "built-in ethernet".
Below that there are check boxes, click "airport". Then click ariport options.
Put in a name, a short one is ideal, and then a password if you want. (only numbers) Click ok.
Now go to the firewall tab. If your brave enough, you can just turn off the firewall. Or...
Click "new". The port name is "other", make the description something short like, "my wii".
THIS IS IMPORTANT.
Under the "TCP Port Number(s)" field type (with the commas): 28910, 29900, 29901, 29920, 80, 443
Leave the UDP blank. Click ok.
Make sure that box is checked, go back to internet and click "start".
Your airport icon on top of the screen should be showing an upward arrow.
NOW...for the Wii setup. Fun isn't it?
Go to your wii setup, then internet tab. Click an empty network or erase one. Now click manual.
Enter the name of your network, what you labled earlier. If you forgot, click the airport icon, it should show you what signal is being sent out.
Now click the arrow and enter your WEP key. The 10 digit numerical password you made. (unless you didn't)
Click the arrow again and where it says auto-obtain IP settings, click no. Enter these; (there will be a lot more zero's auto added when you click ok. leave them)
IP: 10.0.2.11
Subnet: 255.255.255.0
Default Router: 10.0.2.1
Manual DNS settings:
Go to the next screen and again NO auto-obtain DNS.
Primary DNS: 10.0.2.1
Seconday: 10.0.2.11
Leave all the other windows, click save. It should connect.
To stop you Mac from sending the signal, click the airport icon, then internet sharing. You can now click "stop". You airport will go back to normal use. To re-connect to the wii, just go back to the internet sharing and click start. It'll keep all the previous settings.
Good luck and good night.
(As a bonus, do the same wii setup for the DS to work, if you have one)
~Valentine M -
Problems with sync between iphone 5 and macbook pro
Never been able to sync macbook pro and iphone5.
mac dosn't recognise it in anyway. done all normal stuff check for updates, deleted itunes through terminal and re-downloaded it. still no luck.
iphone does sync with other laptops. and the usb port on my mac does work properly, i have no problems with the sync between it and an iphone 4s or even a usb memory stick.
os x 10.8.5 macbook
ios 7.0.4 iphone5Basics from the manual are restart, reset, restore
Follow the 3R's- if a restart does not solve your problem proceed
User troubleshooting is:
1.restart, ie power off/on,
2. reset http://support.apple.com/kb/HT1430,
3. restore from backup, restore as new device. http://support.apple.com/kb/HT1414 -
Problems with connection Creative zen M and DVD-CD pla
Hi,
I have problems whem i connect my zen to the DVD player. I've connected zen with a cable going from the headphones to the audio line in (red and white) at the back of the DVD system. I get sound but the problem is that my zen automaticly switch to the FM radio mode, when it should be playing from the music libary. This happens by 70% of the numbers. How can I deal with this problem?
Problem 2 is that I hear a strong noise when I connect my zen to the DVD player. It's al low sound which comes back in all the 5 boxes en sounds like a bee...
Problem 3 is that I can't get the full volume on the DVD system. Even when zen is max on 25 i've to put the DVD system also max before a normal sound is coming to me...
Can anybody please help me? Thanks!Hi there,
. The reason the ZVM is switching to fm radio is because the headphone jack also supports a wired remote that controls some of the ZVM functions there will be some sort of back feed from your DVD head unit to the ZVM causing this to happen.
2. The headphone jack does carry a bit of noise when used with line in applications and compared to the line out function of the ZVM is muffled and lacks power(this also could be noise in your DVD unit).
3. Same as above(2) the A/V out function has a set volume and is louder and much clearer than the headphone out jack.( The line out is the A/V out function of the ZVM found in the supplied adaptor that plugs into the bottom of the ZVM)
To overcome this problem simply use the line out function of the ZVM either through the dongle and an A/V cable or get an after market cable to suit and that should solve your problems with this type application.
Let us know how you go with it
Heres the bits
http://us.creative.com/products/prod...7&product=4484
Or you can search for a cable that plugs straight into the bottom of the ZVM and has rca's on the other end, you should be able to find then via a search here or through epizenter.net in one of the threads
Message Edited by AussieBoy on 08-0-2006 09:50 PM -
Problem with bluetooth between Iphone 6 and Mac
I've a IPhone 6 (iOS 8.1),and a MacBook Air (OS Yosemite,10.10) and I can't pair their by bluetooth. When I try to pair them the same code is showed but their don't match.. I would like to use handoff. Tks for your support. Ezio
what are you expecting to do with bluetooth between the devices?
you can't sync or transfer files or the likes between the 2 using bluetooth
would link to the apple support page about supported bluetooth profiles but they seem to have taken down the page -
Problems with copying between Adobe Illustrator and keynote
I have recently switched from Tiger to Snow Leopard. A lot of my keynote presentations have started acting up since. Many images that I copied from Adobe Illustrator (CS3) are reported as "missing" when I open the presentations. Also, some Adobe illustrator arrangements give keynote problems when I copy them into a presentation now. The problem here is that I can copy them into keynote but then I cannot duplicate them or copy-paste them again. If I save a presentation containing such images and try to open it after closing it, the same problem about "missing" images becomes apparent.
In comparing with other computers used by my colleagues I have established that this does not have anything to do with my computer. It turns out, any machine running Snow Leopard has these problems but any machine running Tiger or Leopard does not. The problem is present in both keynote 4.0.4 and 5.0.4.
In trying to narrow down the problem I found out the following. The problem is text box based. If I copy a text field (or an arrangement containing one of these) from illustrator into keynote and if that text field contains more than one line, and if that line break is mediated by the "shift-return" key combination, the problems I mentioned show up.
Does anyone have the same problems/know a solution? It is quite a major flaw for me, it essentially means I can dump all my old keynote presentations.
CheersWelcome to the discussions, thetwelfthman.
In copying these from Illustrator to Keynote, I'm assuming that they are pasting into Keynote as a PDF? Also, is there any difference between printing to a PDF then dragging that in and just copying/pasting into Keynote? -
Problems with connect to Em console and IE6.0 with sp1
After installing OEM10g on W2K (server) and trying to connect and login to the management console (http://<servername>:80/em ) with Internet explorer I got the message that my IE browser was to low (5.0) and I have to upgrade to IE5.5 or higher. So I decided to install the newest IE (6.0 + sp1) and tried again to login to Oracle Enterprise Manager but getting a script error now.
The strange thing is that I can connect (same way) from my own pc but there I have IE 6.0 without sp1 and there it works fine.
Is this a bug or is there an option in IE6.0 sp1 to disable/ignore the scripting error ?I found there's a patch available for IE6SP1 from microsoft :
Overview
In the last few weeks you might have experienced difficulty logging on to secure Web sites or completing transactions on the Web. You might also have noticed more HTTP 500 internal server error messages.
If you have been experiencing these problems recently, then your computer might have a recent security update installed (Cumulative Security Update for Internet Explorer MS04-004) that changes how Internet Explorer sends information to the Internet. Some secure Web sites do not work well with this security update and might cause you to experience the problems above.
I have installed this patch, but it still doesn't solve my problem.
Perhaps because this patch is for IE6sp1 (64 bits), I have the 128 bits version. -
Problem etablishing connection between oracle SQL and JDBC
Hi friends i have been trying this code from two days i donno whats wrong please try to sort the problem thank u in advance this is my program:
//This is my Connection class
package com.java.jdbc.util;
import java.sql.Connection;
import java.sql.DriverManager;
import java.sql.SQLException;
public class EmployeeUtil {
public EmployeeUtil()
public static Connection getconnection()
Connection con=null;
try {
Class.forName("oracle.jdbc.driver.OracleDriver").newInstance();
//DriverManager.registerDriver(new oracle.jdbc.driver.OracleDriver());
con = DriverManager.getConnection("jdbc:oracle:thin:@localhost:1521:ORANT","system","manager");
// Class.forName("sun.jdbc.odbc.OracleDriver").newInstance();
// con = DriverManager.getConnection("jdbc:odbc:Javatut","System","manager");
} catch (ClassNotFoundException e) {
// TODO Auto-generated catch block
e.printStackTrace();
} catch (SQLException e) {
// TODO Auto-generated catch block
e.printStackTrace();
} catch (InstantiationException e) {
// TODO Auto-generated catch block
e.printStackTrace();
} catch (IllegalAccessException e) {
// TODO Auto-generated catch block
e.printStackTrace();
return con;
//This is my DB class:
package com.java.jdbc.DB;
import java.sql.Connection;
import java.sql.ResultSet;
import java.sql.SQLException;
import java.sql.Statement;
import com.java.jdbc.info.EmployeeInfo;
import com.java.jdbc.util.EmployeeUtil;
public class EmployeeDB {
Connection connection=null;
public EmployeeDB()
//this.connection=EmployeeUtil.getconnection();
public void select(EmployeeInfo empinfo)
this.connection=EmployeeUtil.getconnection();
String stb = "select * from employee";
try {
Statement stmt = connection.createStatement();
ResultSet rs = stmt.executeQuery(stb);
System.out.println(rs);
//EmployeeInfo empinfo = new EmployeeInfo();
while(rs.next())
empinfo.setEmpId(rs.getString(1));
empinfo.setEmpfName(rs.getString(2));
empinfo.setEmplName(rs.getString(3));
empinfo.setEmpAge(rs.getString(4));
empinfo.setEmpSalary(rs.getString(5));
System.out.println("The EmployeeID is : "+empinfo.getEmpfName());
System.out.println("The Employee First Name is : "+empinfo.getEmpfName());
System.out.println("The Employee Last Name is : "+empinfo.getEmplName());
System.out.println("The Employee Age is : "+empinfo.getEmpAge());
System.out.println("The Employee Salary is : "+empinfo.getEmpSalary());
connection.commit();
} catch (SQLException e) {
// TODO Auto-generated catch block
e.printStackTrace();
//This is my info object
package com.java.jdbc.info;
public class EmployeeInfo {
private String empId;
private String empfName;
private String emplName;
private String empAge;
private String empSalary;
public String getEmpAge() {
return empAge;
public void setEmpAge(String empAge) {
this.empAge = empAge;
public String getEmpfName() {
return empfName;
public void setEmpfName(String empfName) {
this.empfName = empfName;
public String getEmpId() {
return empId;
public void setEmpId(String empId) {
this.empId = empId;
public String getEmplName() {
return emplName;
public void setEmplName(String emplName) {
this.emplName = emplName;
public String getEmpSalary() {
return empSalary;
public void setEmpSalary(String empSalary) {
this.empSalary = empSalary;
//This is my Controller class:
package com.java.jdbc.controller;
import com.java.jdbc.DB.EmployeeDB;
import com.java.jdbc.info.EmployeeInfo;
public class EmployeeController {
public static void main(String args[])
EmployeeDB empdb = new EmployeeDB();
EmployeeInfo emp = new EmployeeInfo();
empdb.select(emp);
// I got these errors:
java.sql.SQLException: Io exception: Got minus one from a read call
at oracle.jdbc.dbaccess.DBError.throwSqlException(DBError.java:114)
at oracle.jdbc.dbaccess.DBError.throwSqlException(DBError.java:156)
at oracle.jdbc.dbaccess.DBError.throwSqlException(DBError.java:269)
at oracle.jdbc.driver.OracleConnection.<init>(OracleConnection.java:210)
at oracle.jdbc.driver.OracleDriver.getConnectionInstance(OracleDriver.java:251)
at oracle.jdbc.driver.OracleDriver.connect(OracleDriver.java:224)
at java.sql.DriverManager.getConnection(Unknown Source)
at java.sql.DriverManager.getConnection(Unknown Source)
at com.java.jdbc.util.EmployeeUtil.getconnection(EmployeeUtil.java:18)
at com.java.jdbc.DB.EmployeeDB.select(EmployeeDB.java:20)
at com.java.jdbc.controller.EmployeeController.main(EmployeeController.java:11)
Exception in thread "main" java.lang.NullPointerException
at com.java.jdbc.DB.EmployeeDB.select(EmployeeDB.java:23)
at com.java.jdbc.controller.EmployeeController.main(EmployeeController.java:11)Are you using Oracle 10.2 in shared server configuration under Windows?
If so it's a driver bug (BUG - Connection pooling with 10g 10.1.3 Preview 4 App Server Oracle suggest to use OCI driver. -
Problem with Interaction between SAP GUI and BSP Applications
Hi Folks,
I am new to BSP and am trying to create a program to created a BSP within the SAP GUI. This is my program, I have tried to find as to what error have I made but I am not able to find out.
I can only find a button post document in the output, but I am not able to trigger any event. Please let me know as to what is the error.REPORT zbsp_iact_gui.
SET SCREEN 100.
* CLASS cl_my_html_yiewer DEFINITION
CLASS cl_my_html_viewer DEFINITION INHERITING FROM cl_gui_html_viewer.
PUBLIC SECTION.
METHODS: constructor IMPORTING parent TYPE REF TO cl_gui_container.
METHODS: on_sapevent FOR EVENT sapevent OF cl_gui_html_viewer IMPORTING action postdata.
ENDCLASS. "cl_my_html_viewer DEFINITION
* CLASS cl_my_html_viewer IMPLEMENTATION
CLASS cl_my_html_viewer IMPLEMENTATION.
METHOD constructor.
super->constructor( parent = parent ).
DATA: event_tab TYPE cntl_simple_events,
event TYPE cntl_simple_event.
event-eventid = me->m_id_sapevent.
event-appl_event = 'X'.
APPEND event TO event_tab.
call method html_control->set_registered_events
exporting
events = event_tab.
SET HANDLER me->on_sapevent FOR me.
ENDMETHOD. "constructor
METHOD on_sapevent.
BREAK-POINT.
IF action CS 'COUNTER'.
DATA: counter TYPE string.
READ TABLE postdata INDEX 1 INTO counter.
SPLIT counter AT '=' INTO counter counter.
MESSAGE counter TYPE 'I'.
ENDIF .
ENDMETHOD. "on_sapevent
ENDCLASS. "cl_my_html_viewer IMPLEMENTATION
DATA: html_viewer TYPE REF TO cl_my_html_viewer,
html_container TYPE REF TO cl_gui_custom_container,
fcode LIKE sy-ucomm.
*& Module STATUS_0100 OUTPUT
* text
MODULE status_0100 OUTPUT.
SET PF-STATUS 'TESTHTM1'.
IF html_viewer IS INITIAL.
CREATE OBJECT html_container
EXPORTING
container_name = 'HTML'.
CREATE OBJECT html_viewer
EXPORTING
parent = html_container.
DATA: url TYPE string, urlc(2048) TYPE c.
cl_bsp_runtime=>construct_bsp_url(
EXPORTING in_application = 'ZBSP_IACT_GUI'
in_page = 'Start.htm'
IMPORTING out_abs_url = url ).
urlc = url. " type conversion STRING to C
CONCATENATE urlc '?SAP-CLIENT=650' INTO urlc.
html_viewer->show_url( url = urlc ).
ENDIF.
ENDMODULE. " STATUS_0100 OUTPUT
*& Module USER_COMMAND_0100 INPUT
* text
MODULE user_command_0100 INPUT.
CASE fcode.
WHEN OTHERS.
CALL METHOD cl_gui_cfw=>dispatch.
ENDCASE.
ENDMODULE. " USER_COMMAND_0100 INPUT
Edited by: Nonconformist Pagal on May 12, 2009 1:42 PM
Edited for formatting by: Durairaj Athavan Raja on May 14, 2009 9:50 AM -
Communication problem between ASA 5510 and Cisco 3750, L2 Decode drops
Having problem with communication between ASA 5510 an Cisco Catalyst 3750.
Here is the Cisco switch port facing the ASA 5510 configuration:
interface FastEthernet2/0/6
description Trunk to ASA 5510
switchport trunk encapsulation dot1q
switchport trunk native vlan 50
switchport trunk allowed vlan 131,500
switchport mode trunk
switchport nonegotiate
And here is the ASA 5510 port configuration:
interface Ethernet0/3
speed 100
no nameif
no security-level
no ip address
interface Ethernet0/3.500
vlan 500
nameif outside
security-level 0
ip address X.X.X.69 255.255.255.0
There is a default route on ASA to X.X.X.1.
When I try to ping from ASA X.X.X.1 i get:
Sending 5, 100-byte ICMP Echos to 31.24.36.1, timeout is 2 seconds:
Also in the output of show interface eth 0/3 on the ASA i can see that the L2 Decode drop counter increases.
I have also changed the ports on the Switch and ASA but the same error stays.
Any thoughts?I don't see anything wrong with your trunk configuration; I have a similar one working between an ASA 5520 and a Catalyst 3750G.
Maybe you should adjust the "speed 100"? In my experience, partial autoconfiguration results in duplex mis-matches, which results in dropped packets.
I'd try removing the "speed 100" and letting the ASA port autonegotiate with the switch. Alternatively, have both sides set
speed 100
duplex full
and see if things improve.
-- Jim Leinweber, WI State Lab of Hygiene -
When I Hotsync Bluetooth connection is successful, then in step 2, "Connecting with the desktop" Hotsync errors out with message "The connection between your device and the desktop could not be establisthed. Please check your setup and try again."
Bluetooth configuration inticates Bluetooth serial port COM Port is set to COM3
Hotsync setup: when I click "Local" tab I get error message "The selected port, COM5, is not available at this time. HotSync Manager will open the port when it becomes available."
Hotsync setup > "Local" tab > Serial Port dropdown shows only COM4. I cannot change it to anything else.
Note: I can send files to PC using Bluetooth just fine; error only occurs when I Hotsync using Bluetooth connection.
Tried rebooting both laptop and Palm TX. Still can't Hotsync.
Operating system: Windows XP Pro
Post relates to: Palm TXYou are not the only one having this problem. I have REPEATEDLY tried to bluetooth sync with my new toshiba windows 7
Palm 6.2.2 to no avail. I have tried every bluetooth device they suggest and every "fix" or "solution" that has been offered here and in on line chat with a Palm tech. No dice! I even took my computer and all components to a tech. He worked on it for 5 hours. Every once in a while for no apparent reason it will magically sync, but never consistently. Using 32bit on my husband's computer with Vista, and the docking cradle still works so I have my data. A few others have apparently had success with this problem but I think it is an accident that it works for them when it does. Otherwise it would work for everyone. We have read everything we can find and spent literally hours and hours and hours.
I am now in the process of trying to import/export to Outlook and plan to upgrade to another device like iPhone or blackberry that will sync data with Outlook. My Palm TX also has not been able to successfully sync with that although, as I said earlier, it syncs with Palm Desktop. Good luck with your's. -
Problem with connecting and syncing (quicktime.qts)
Hi,
I have a problem with connecting and syncing my Iphone to itunes.
iphone alone on PC -> uploading files (fotos) is possible
itunes starts normaly, if iphone is not conected.
if i connect iphone after starting itunes, or if i start itunes after connecting iphone i get an itunes-error with message:
AppName: itunes.exe AppVer: 9.0.2.25 ModName: quicktime.qts
ModVer: 7.65.17.80 Offset: 00909a47
i test different things...
- used another USB-port
- used another PC
- used macbook of my wife instead PC
- deinstalled and new installed of itunes (older and newer versions) folow tutorials of apple
- use another USB-Cable...
I'm resigned, Please help me..
TomAppName: itunes.exe AppVer: 9.0.2.25 ModName: quicktime.qts
In this context, that can sometimes indicate trouble with a content file on the phone (or Touch).
Do you have any podcasts stored on the iPhone at the moment? If so, if you delete them from the phone, can you connect to iTunes without the error?
Maybe you are looking for
-
I bought the Adobe student version of Photoshop and Premiere Elements a few months ago - and now I am trying to use it, and the serial number that I have is incorrect - or it is only the registration number or something? It says I should have been se
-
My iphone 4s front facing camera won't work. How do I fix it?
My iphone 4s's front facing camer freezes like it's about to work but I don't know how to make it work. It just stays frozen.
-
How to implement a configurable queue datatype?
I have an LV6.1 application that uses queues to transfer cluster data from one VI to another. I want to be able to (re-)define the cluster make up in one place, and have both the sending VI and the receiving VI adapt. As a relative newbie, am I missi
-
Can't load Aperture from my purchase list
Hi, tried to download the last update of Aperture 3.6 from the App Store. I see it in my list and can klick "update" - but nothing will happen :-/ Any help here? Thanx & Regards Ralle
-
HELP! RIGHT EAR BUD STOPPED WORKING
My new In-Ear headphone's right ear bud stopped working all of the sudden! Did I broke the tweeter, or the woofer? If yes, how do I replace it?