Problems with conversion

It I have to create a pdf from word 2013 (it's a normal a5 book) and i'm on win 7, acrobat xi; when I print it as pdf, the footnotes (which are set by default as beginning from 1 at each new page) in some pages become continous footnotes (they begin from 2, 3, 4 and s on until they become 35, 36 and so on: thereafter, they begin again from 1 from another chapter). What is wrong? Thanks to whom who will reply.

I understood what was the problem, perhaps: I unchecked to option to treat the notes as links, then exported "from the ribbon" (do you mean the "acrobat" writing after "revision" and "visualize" in the comand upper bar?). Perhaps word or acrobat either gave problems in converting this way and messed with the kind of footnotes. Maybe you may add this to the knowledge base and/or adjust acrobat. Though, the problem persists: if I export from the ribbon, it gives me the correct footnotes, but doesn't embeds the fonts (I upload the pdf to my POD producer and the wizard says that most fonts aren't embedded)! But when I print the docx instead, the fonts are embedded but the notes are wasted! WTF! I'm going crazy with this!

Similar Messages

Problem with conversion of strings like THISStr - this_str capitalization

Problem with conversion of strings like. THISStr -> this_str
Can anybody pass on the reverse code. I have one, but its faulty.
public static String convertFromPolycaps(String str) {
          Pattern pattern = Pattern.compile("\\p{Upper}+");
          Matcher matcher = pattern.matcher(str);
          StringBuffer result = new StringBuffer();
          // We do manual replacement so we can change case
          boolean notFirst = false;
          int grpP = 0, grpA = 0;
          String last = "";
          String now = "";
          while (matcher.find()) {
               grpA = matcher.end();
               if (notFirst) {
                    now = matcher.group().substring(0).toLowerCase();
                    if (grpA - grpP > 1) {
                         matcher.appendReplacement(result, now);
                         result =
                              new StringBuffer(
                                   result.substring(0, (result.length() - 1))
                                        + "_"
                                        + result.substring(result.length() - 1));
                    } else {
                         matcher.appendReplacement(result, "_" + now);
               } else {
                    matcher.appendReplacement(result, matcher.group().substring(0).toLowerCase());
                    notFirst = true;
               grpP = matcher.end();
               ////index++;
               last = now;
          matcher.appendTail(result);
          System.err.println(str + " : " + result.toString());
          return result.toString();
     }succesfully converts :
AccountNmnc : account_nmnc
CustNameJ : cust_name_j
Resume : resume
BeneBrCode : bene_br_code
ApprovedPerson : approved_person
but fails for:
GLCode : glcode
VISHALErrCode : vishalerr_code
GHASUNNAcNo : ghasunnac_no

Can anybody pass on the reverse code. I have one, but
its faulty.Post it, I'm sure we can fix it...

I cant export my pdf to excel - Problem with conversion

I cant export my pdf to excel - Problem with conversion
Somebody is having this problem?

Hi,
May i know what is the challenge you are facing?
Check with another file.
You can try with different browser as well.
Regards,
Florence

RAW Highlights Problem with conversion from Canon 5D

Hello All,
I recently upgraded my camera from a Canon 20D to a Canon 5D. I shoot only RAW and I recently shot a couple of images of a beautiful sunset out West. I was bracketing the exposures all over the place since the light-drk contrasts were really large and the light was changing so fast. The images looked great on the Camera's LCD but, when I ran them through Aperture I got some really nasty artifacts on the conversions around the highlights. Here are examples:
Full scene
http://www.flickr.com/photo_zoom.gne?id=307781903&size=l
Full scene detail:
http://www.flickr.com/photo_zoom.gne?id=307781906&size=o
Another example:
http://www.flickr.com/photo_zoom.gne?id=307781905&size=l
the problem I see is with the nasty transition from yellow to white in the blown highlight. I also don't like the broad areas of flat yellow - the tonality is completely missing. These are the default RAW settings exported to JPGs and the poor image quality of the highlights looks identical on screen between the RAW images in Aperture and these JPGs, so it's not a JPG artifact.
I don't recall having this problem with the 20D - is the 5D conversion more difficult for Aperture? Might I be doing something wrong? Is there a way to fix this? I ran the RAW file through lightroom and it didn't have the same problem. Please help!
-Steve G

I have the same problems when I shot the sun rise and sun set.. It is very nasty transition from yellow to white or white to yellow from the sun. I don't think Aperture can fix that. It was over the exposure with the sun. And yes, it looks great on 2 inches LCD. I think you need to use filter when you shoot the sunset or sunrise to get the perfect lighting. Let me know, if you know the tweak with Aperture.. I will check out lightroom... I have alot of sunet and sunrise photos to correct.. and i checked out this place http://www.all-creatures.org/pics/sunset.html they have the same problems with yellow to white...

Skype - Problem with conversations (group)

Hello i have problem :
I call to friend - work
i call to friend and add 2 friend = It does not work
why?
I add 2 friend to conversation and 1 friend add 2 friend no (After addition of 2 people can not write in a conversation (connection problem))
Leave Conversations = It does not work
Everything related to the conversation group does not work
i : 10xReinstall skype, install IE 11, Clean Regedit, use Ccleaner, Update drivers, use ADWCleaner, update version, uninstall anti-virus, Disable Firewall, disable firewall system, router. download latest skype versions, update windows, update drivers.
Skype Version bugged : 7.0.102
Available commands:
/me [text]
/topic [text]
/add [skypename+]
/alertson [text]
/alertsoff
/leave
/setrole [skypename] MASTER|USER
/kick [skypename]
/get blob
/get uri
/get options
/set options [[+|-]flag] ..
/golive [token]
/invite [skypename]
/showmembers
/help
For more help please see http://www.skype.com/go/help.chathelp
[10:50:29] System: MSNP: Connection Data (MSNP24):
* Status: NetStateConnected
* Server Current: BAYMSG1020424.gateway.messenger.live.com
* Server Saved: s.gateway.messenger.live.com
* Login: (UIC)
* Skypename: [Removed for privacy]
* EPID: 800da14d-01bf-f1d1-d0e6-2b670390ef97
* ClientVersion: 0/7.0.80.102//
* OSVersion: Windows 6.1 Service
* B: 0 IF: 0
* Time: TZ: UTC+1, Server: 1422093024, Local: 1422093029
* Recent connect: BAYMSG1020424.gateway.messenger.live.com @ 2015-01-24T09:03:12Z
* Recent connect: BAYMSG1020424.gateway.messenger.live.com @ 2015-01-24T08:41:41Z
* Recent connect: BAYMSG1020424.gateway.messenger.live.com @ 2015-01-24T08:19:35Z
* Recent connect: BAYMSG1020424.gateway.messenger.live.com @ 2015-01-23T12:46:14Z
* Recent connect: BAYMSG1020424.gateway.messenger.live.com @ 2015-01-22T19:46:56Z
* Push: None (Unregistered)
[10:50:40] System: name=#[Removed for privacy]/$*T;65570

So here is how I got it fixed for my Mac OS X 10.9.5 and skype 6.19. I think Windows folks can follow a similar approach.
option 1 - Contact a live support agent via this link -
https://support.skype.com/en/faq/FA10656/what-is-live-chat-support and have him/her remote login to your machine and fix it.
option 2 - Do-it-yourself
1) Try installing skype ver 6.15 (you need to find the executable over the internet or from skype-support) .. the usual steps to uninstall your current version and re-install the new version.
After installing ver 6.15, make sure in Skype -> Preferences, you don't check the "Always keep skype up to date" option.. or else it will go and install the latest version 6.19.
2) If it still doesn't work,
(i) Go to Finder window -> select 'Go' tab on top -> select 'Go to Folder' -> type '~/Library/Application Support/Skype/'
there you will find a file called "shared.xml". DELETE IT.
(ii) Go to Finder window -> select 'Go' tab on top -> select 'Go to Folder' -> type '/private/var/db'. There may be a file called "config.xml" or something similar. DELETE IT.
3) Even then it doesnt work, go back to Option 1 (contacting skype-support)

[ePub / Indesign 5.5] Problem with conversion to epub

Hi everybody!
I need some help with my job. I was converting Indesign files (ID cs5.5) to epub. So I found a problem with this message:
I verified that the problem is in one of items that it not showed, but the style is equal another all items that is showed, I mean, all the other items with the same style is showed, see:
I work in Mac with OSX 10.6.8.
It's a mystery to me, cause the ohters books don't make this problem.
I'll appreciate any help.
Wagner

Well, I probably answer myself.
First, I reset the [Basic Paragraph],
- Set the style that I applied in the text, like "Title chapter" with Based on: basic paragraph with the changes.
- And then, set the TOC style with Based on: basic paragraph too with the changes.
For one book this resolved, for another one it needs create another style Based on: [Basic paragraph], changes that I need, apply and change the table of contents style with whis one and, woks fine.
The reason, I'll still waiting for the reason.
Wagner

3 problems with conversion to PDF

Hi,
I am using Adobe Acrobat 6.0 Professional and MS Word 2003.
When converting Word documents to PDF, I have these problems:
1) Bright colours in my Word files (red, pink, yellow) turn much darker and duller in PDF. They look kind of dirty red/pink/yellow. Very unattractive.
2) Large fonts such as 18 (I use Arial) lose red colour in some letters and turn out white (with a red outline), while some letters remain red.
3) Spaces between lines with hyperlinks get shifted in PDF - some remain in place, some just disappear, leaving no space between the lines. Can this be fixed in settings somehow?
I would be so grateful if someone could teach me how to fix these 3 annoying glitches!
Thanks in advance,
Gloria

Mike,
There are no Distiller settings that I can see in my Word document. There is the Adobe PDF tab which leads to Acrobat PDFMaker and inside it I tried changing conversion settings to Standard, to Press and to High Quality - and in every case I'm still getting the same dark colours in headlines instead of bright, and shifting, shrinking spaces between lines. As soon as I click on the "Convert to Adobe PDF" button, the spaces between hyperlinks start disappearing and the whole page formatting goes crazy. Very frustrating to see the loss of quality.

Problem with conversion AVCHD

I have the Sony SR-7 and I convert the AVCHD clips with Log & Transfer (Final Cut Express 4.0.1) but the converted clips are in fast motion (3X or 4X about): A clip about 10 sec is converted in a 3 second clip approximately. And the same thing with the rest of Clips. Also the clips are bad converted (with pixels, interferences...) Anybody have the same problem?
It happens the same when I convert the clips with IMovie instead of FCE.
Maybe I dont have any codec or plugin in the computer? But I have instaled the Apple Intermediate Codec and the Perian Codec is not installed (as it is said in some forums).
Thanks.

I have a Quad Core Intel Xeon and the format of Sony SR-7 is MTS.
Codec : AVC
Codec/Family : AVC
Codec/Info : MPEG-4 AVC
Codec profile : [email protected]
Codec settings, CABAC : Yes
Width : 1440 pixels
Height : 1080 pixels
Display Aspect ratio : 16/9
Frame rate : 25.000 fps
Chroma : 4:2:0
Interlacement : Top Field First
In FCE I have the same settings, but the problem is the conversión process.

Problem with conversion failed

I have two inputDate control, one for start_date, the other for end_date.
Each inputDate has a convertDateTime and a validator that check whether start_date is smaller than end_date.
First, I input the valid date data, all thing is OK.
Then, I input a invalid string such as "a" in end_date and start_date, the error messages displayed.
Then, I input a valid date data in end_date. After the conversion complete, the validation is executing.
When I want to get the start_date value, the value is not the "a" but the valid value before.
How can I get the failed data or failed status ? Or skip the validation when one input conversion failed?
Thanks.

I think the problem is a spelling error: you named your structure "structs" and then you refer to it as "struct".
You have to choose one between the two (or a better one if you can find it).
About File content conversion I suggest you to see the following links:
Content Conversion (Pattern/Random content in input file)
/people/anish.abraham2/blog/2005/06/08/content-conversion-patternrandom-content-in-input-file
File Content Conversion for Unequal Number of Columns
/people/jeyakumar.muthu2/blog/2005/11/29/file-content-conversion-for-unequal-number-of-columns
How to send a flat file with fixed lengths to XI 3.0 using a Central File Adapter
/people/michal.krawczyk2/blog/2004/12/15/how-to-send-a-flat-file-with-fixed-lengths-to-xi-30-using-a-central-file-adapter
Content Conversion ( The Key Field Problem )
/people/shabarish.vijayakumar/blog/2006/02/27/content-conversion-the-key-field-problem
Solution to the problem encountered using Variable Substitution with XI-SP12
/people/sravya.talanki2/blog/2005/08/11/solution-to-the-problem-encountered-using-variable-substitution-with-xi-sp12
I hope this will be helpfull.
Regards,
Salvatore

Problems with conversion AAC format in ITunes

Hello, I need Help !
I have a CD for U2 - No line on the Horizon and don´t get import musics from CD to my Itunes, I recive one mensagem that there is a problem wit bit hate and sample hate in conversion to AAC format, anyone know this problem and resolution ?

Change your import setting to MP3 and import the tracks.

Problem with conversations view in messages

After the Belle update, all my sms-messages were deleted. So i got them back by restoring them from the back up i made before updating. Now they are not displayed in the right order, by date. Instead, first i get the mms messages, then when I scroll up I get all my sent messages to that contact, en even more up all the received messages. So it's not a conversation anymore. Within the "sent" and "received" messages groups they are ordered by date and time. How can i fix this so i can see the actual conversation again, with alternating sent and received messages? The mms messages also have the time and date from restoring from the back up, the regular sms-messages still have the original time and date correctly.
I hope someone can help me to fix this. It's really annoying.

I have the same issue after updated to Belle. Have to manually copy each "sent" and "inbox" per contact from Nokia Suite back to phone one by one according to the time. Very annoying since the backup and restore during upgrading from Anna to Belle did not work properly. I don't think Nokia did not acknowledge this issue and Nokia will solve this issue for Symbian phone since this had happened in Anna update last time and is now happening again in this Belle update. Forfunately there is Nokia Suite in the host PC that can manually do the task but consume users' time.
angler

Problems with conversion and import to FCP

I have some files in m2ts format and convert them to Quicktime using iSkysoft video converter.
When I import to FCP and render where there is a lot of action I get a wavy pattern all over the image (maybe related to interlace) is there a filter to fix this or another conversion program?
(Im using FCP 6)
Message was edited by: Andreas Sweden

I have tried with MPEG Streamclip that I usually use as well but it will not take the files. I am just trying out iSkysoft for this and it appears to be a descent program.
I have tried Xvid encoding and H.264 (only two options available), I tried to convert to .DV format as well but with same result.
It appears that the material becomes interlaced twice on top of eachother

N8 problem with Conversations

Hi all,
my N8 start having a really annoying problem lately.
When i bough it the conversations were working perfect! when i was gettin a new text and was choosing to read it, it was opening in the conversations.
Now when i choose to read it and click on it, it opens the conversations but the msg is blank! When i click on the blank msg, and opens as a normal text, then i can read it!
Any suggestions?

i"m having the same problem although my N8 is still brand new. i can't delete sms in sent items. it says: general: already in use.
i tried soft reset. but it didn't work.
and i don't have a backup for my messages.
can anyone tells me what to do?!! and is there anyway but hard reset?!!
please help

Problem with conversion

I am trying to convert from type p decimals 4 to character string value,it is giving error Value can't be interp. as floating-point number or longer than 22 charac.
I am using following code.
l_mean = w_mean_val-mean_val.
l_mean TYPE qsollwertc,
mean_val TYPE p DECIMALS 4,
If i have the values in w_mean_val-mean_val as positive then it is working.if the values are negative giving error
qsollwertc is of character string of length 16.
Regards,
Sai

Hi
Use split & Concatenate mechanism.
Regards,
Sreeram

Problem with & conversion into &

I am running following URL
http://<my environmnet>/product/inventoryCheck.jsp?sv=111111&source=MS_eqt&response=vars.
it should display "available=n" but it return 'n'
But when i manually convert all '&' in URL into '&',
it showing the correct result i.e. "available=n".
So does it mean that my browser is not able to convert '&' into '&' in URL only
as it converting '&" into "&" in an HTML form
Thanks in advance
Regards,
Vilish

I am running following URL
http://<my environmnet>/product/inventoryCheck.jsp?sv=111111&source=MS_eqt&response=vars.
it should display "available=n" but it return 'n'
But when i manually convert all '&' in URL into '&',
it showing the correct result i.e. "available=n".
So does it mean that my browser is not able to convert '&' into '&' in URL only
as it converting '&" into "&" in an HTML form
Thanks in advance
Regards,
Vilish

Problems with conversion

Similar Messages

Maybe you are looking for