Problems with Cool N Quiet and MSI Live Update

Hi
I have had my K8T NEO FISR2 motherboard for a year and generally I have been very happy with it. However, I have just installed Full Spectrum Warrior (about 3 weeks ago ) and Nortons Internet Suite 2005 and both installations resulted in the same error message when I boot up.
The error message is that MSI Live Update isn't started up, and also that Cool N quite is not supported on my motherboard which is obviously rubbish.
I have done a complete re-install of the Live Update and Cool N quite and that fixes it, and then it seems to come back a day later.
Has anyone else experienced this problem?
Thankyou for your help

I stopped using the MSI software completely. Also got lots of troubles with it. MSi Live Update for example stops the audio drivers working while checking their revision and so on, so my advice is to use it only if needed once in a while and not loading it together with Windows.

Similar Messages

DualCoreCenter and MSI Live Update 3

I downloaded the DualCoreCenter a while ago, failed to reboot the computer, and it didn't work when I tried to open it. So I uninstalled it and tried reinstalling it, this time rebooting, but it still won't open. I double click on it (in the start up menu and on the desktop), it has the hourglass for a second, then it goes away. It never loads. MSI Live Update 3 gives me the error message "Cannot open file MSI" then opens my Jasc Paint Shop Photo Album. Any help on either problem would be greatly appreciated. Thanks!!
Also, while reading the stickies, I saw a program called DriverCleaner, but the link to the free version was broken. Is the free version no longer available? If it is still available, where can I get it from? I have many old drivers (mainly from my old ATI card, now using Nvidia) that I am afraid to get rid of myself. Thanks!

Quote from: Taysel on 07-July-07, 03:17:59
What utilities do you suggest I use then? I have a Nvidia 8600 GT OC edition.
Driver Cleaner
for monitor and adjustment, Rivatuner:
https://forum-en.msi.com/index.php?topic=109512.0

Problems with Z68a-gd55 g3 and msi 660 gtx oc ed.

Bought the 660gtx card last week and have been pulling my hair since.. been getting the no post problem with the new card as some other ppl here I see.
from what I gather it's a bios update which is making the combo of these cards to work properly the msi liveupdate took me up to n.70 and that didn't help after reading a couple of posts here i found out about the beta updates for my bios.
Beeing a bit new when it comes to flashing I thought I'd make myself sure at what update to use.
In another post the tip was using .n88 is it still the best to use?

yes it's sandy bridge however I seem to do something wrong with the bios update. using the MSI Forum HQ USB Flashing Tool and ran it got the .n88 on there set the bios to boot from it, got a press any key to boot from usb key then it shoot directly to win logo and starts windows.
Running the usb flashing tool program again and it says I got the BIOS Version: VN.8B8 (aka Version: V23.8B8) and a restart later it reverts back to BIOS Version: VN.7 (aka Version: V23.7)
First time I shut down windows after it started and did a clearcmos.
I'm guessing I'm doing something wrong.
Might as well post my system while I'm at it.
System is:
MSI Z68A-GD55 G3
Intel core I5 1155
2x4gb Corsair DDR3 1600
MSI Geforce 660GTX 2GB Twin frozr
320GB WD Caviar
Fractal design Newton R2 650W Modular
almost forgot second time I tried I updates as before and didn't do a clearcmos just turned off the computer plugged the 660 gtx in and started this time I got 2 beeps from mainboard then nothing. then silence for a while then two beeps again until I turned off the computer put my old 250 gts back in and the bois had reverted back to VN.7 again.
without the update and the 660 gtx the update fans running hd runs a bit then nothing btw.

Gaming problem with Cool n quiet ?

Hi there,
I've enabled cool'n'quiet in the Bios, because my fan was doing too much noises.
So now in CPU-Z, the multiplier is x5. But the problem is that is STAY at x5 even when i'm playing game like DOOM3 or Half-Life 2.
So it is lagging a lot in the game, but it doesn't crash (thank god).
I wonder why my fan don't ajust itself, because it should right? CPU go 100% but the multiplier and the fan speed stay don't move.
Thanks,
TanGU.

Quote from: blazing storm on 01-April-05, 06:48:40
Try enabling cool n'quiet in the bios. I had the same experience when I first built my pc a while ago.
Uh... thanks but, like i said:
Quote
Hi there,
I've enabled cool'n'quiet in the Bios, because my fan was doing too much noises.

925XE AND MSI LIVE UPDATE

I purchased a 925XE Platinum from MSI; using an Intel 550J 3.4Ghz; Kingston DDR2 PC3200 400 Mhz (2 1 Gig sticks); Nvidia 7800 GTX OC; in an ANTEC P160 with Smart power 2.0 500W; 2 74 G RAPTORS in RAID and a 320 G western digital - all SATA; running XP Pro with service pack 2.
Had trouble getting sound so I downloaded the latest C-Media Azalia Audio Drivers, Driver version: 5.12.01.0008.60 for the 925XE. I had to manually download since Live Update would not run (more on that in a sec). I have sound now, way too much. First notch of volume is tolerable but anything more starts to rattle the windows. This could be realted to the problem above.
I see on the MSI website that there are a number of downloads (drivers, BIOS) that the 925XE may need. The problem is the inability to run Live Update. I can download the program and install, but when I reboot the PC, it goes into a sequence of auto reboots and will not stop until I snag the load with F8, enter the safe mode for XP. I then have to uninstall the Live Update program, restart the PC and everything is fine.
I still need to download the updates (I believe just because of the magnitude of the problems) but cannot get there. Suggestions?
Mick

You can download drivers from http://www.msi.com.tw/program/support/driver/dvr/spt_dvr_detail.php?UID=635&kind=1 directly.

Are you having problems with Windows XP Pro and Airport Utility Updates?

I was having problems with my wireless laptop setting up my Bonjour Printer. I checked to make sure I had downloaded the latest updates to Airport Utility and Bonjour. Check. After doing this I noticed I couldn't see my Airport Extreme through the Airport Utility. After much frustration and bringing my entire network crashing down around me, I got help from a knowledgeable guy from Cox Cable in San Diego. He helped me get my trusty iMac Power PC online. It saw my Airport Extreme but no answers were forthcoming in any forums about my XP issues. Here is what finally solved my problem. I uninstalled all Airport Utility and Bonjour Programs. I then went back to Airport Utility 5.3.1 for Windows. It installs Bonjour Printer services with this download. Everything is working perfectly again. I have my Canon Pixma MP500 connected to the USB port on my AEBS and Bonjour walked right through the setup process. I suggest that if this works for you, turn off all Airport Utility and AEBS firmware updates until you see that whatever issue Apple created with these updates gets fixed.

Well... it worked! :D
I'm pretty sure the extra 512 memory stick was the problem, that would explain why it was being inconsistent with its type of failures before. I'm going to reinstall it later and run memtest86 and try and see if i can get it to work at all somehow without causing problems, cuz 1.5 was already low enough...
DryHeat, yeah it was with SP2 but I got it installed now so no worries
Thanks a lot!

Problem with Droid Razr Maxx and Jelly Bean update

My Droid Razr Maxx was updated this morning and right away found a couple of problems. First, although I was sitting next to my wireless router, the signal display indicated a really weak signal. This seemed to clear up after a reboot and an on-off-on cycle of the wifi on the phone.
The second problem was that, with the wifi off, I had no data signal. None. The phone worked but no 1x/3G/4G. I traced that problem to the phone configuration. Somehow the update turned off Mobile network data access. (Menu -> System Settings -> Wireless Netwroks -> More... -> Mobile networks -> Enable data access over mobile networks)
Seems like a dumb thing for the update to do.

Put all of your contacts in one place, Gmail contacts. Gmail will only sync one copy and is an excellent way to restore contacts after a factory reset. If you have contacts in Gmail, Verizon Backup Assistant, Facemail, etc. then you will probably get multiple copies. Ditch Backup Assistant ASAP if you have it activated.
Make sure all of your contacts are in Gmail Contacts, erase all contacts from your phone (clear data in Settings > Apps > All > Contacts Storage), and resync with Gmail Contacts.

Problem with Stock A64 HSF and MSI K8N FSR

Hey guys I was wonderinf if anyone could help me with this little problem.
My stock A64 2800+ (newcastle) hsf no longer spins higher than 3500rpm anymore. I first bought my system about 3 months ago and paired it with the msi k8n fsr board. Everything was working fine and under heavy load playing games the hsf would spin to a loud (but effective) 5500rpm max (as measured by speedfan).
About a month ago I managed to kill my k8n board and got a replacement one. Now after setting everything back up, my hsf no longer spins any faster than 3500rpm, regardless if i turn my fan up to 100% in speedfan or run games for hours.
Anyone have a clue?
My specs:
A64 2800+ @ 2.16Ghz (newcastle core)
MSI K8N FSR
1 Gig DDR3200 (generic)
Leadtek Geforce 6600GT

this may sound weird but sometimes i like to return my bios to version 1.3 or below... i want to hear my cpu fan roar! eventhough the reading is high with the old bios, atleast now i'm sure that my CPU is cool... cooler if my CPU fan is on high speed.
hope msi can make a bios update where the user can manually adjust the fan speed to its max... (its true max speed) unlike right now which the max speed only reaches 3000 rpm but its capable of running 5500 rpm.
pray... pray... pray... Lord please have MSI hear my prayers.

Problem with SATA hard discs and MSI motherboards (could it be the SATA cable)

I have two systems with a Seagate Barracuda 7200.10 ST3250620AS 250GB Serial ATA (3.0Gb/s)
hard disk.
One system has a P965 Neo and the other has a PN6 SLI motherboard.
I am having issues in that the OS seems to install properly but after a few days the users gets on hd type problems.
One users workstation the hard drive would not boot. Tried everything to get it to work from F8 but it would get stuck in the window flash screen with the bottom moving accross the screen.
The other just kept giving the user disk type errors with blue screens.
I since have replaced P965 mobos hd with a pata. Its only been running for a day not sure if that solved it.
The other machine I put the drive into another machine I was building and it found errors and fixed them and booted up. This same hd would not work at all in the prior system so I am RMAing that board. Even a PATA would not finish xp installation with that MOBO.
I am not sure but I have a feeling that the SATA cables may be the cause of this type of problem. These are SATA2 drives. I tend to think you have to use better quality drive cables when using these.
Those things are so flimsy as they are. I think some cables are better then others. Whos the idiot that designed those things?
MSI only gives you one sata cable. My dvd uses one as well.
Has anyone else had issues using the newer faster drives?
I build a lot of machines but have only been building SATA drives for the past 6 months. These are the first to use this seagate 16 mb drive. When SATA first came out I had these types of issues so avoided using them for over a year. Now I would like to continue using them. But these cables appear to have connection issues.

Its happening to two different computers with 2 alike drives. I have 2 other drives not even opened yet. It does appear to be a cable issue however, I don't think I will take the chance and keep the 2 unopened drives as that would be even more risky. I am already stuck with 2.
These drives seem to be very fast at least. But those cheap sata cables are not too comforting.

AGP Driver Problem with my ms-6585 and msi-ti4200 128 8x

hi all ! Hope i'll get an reply cause this is bugging me since i have my board. I'm having trouble with all the AGP drivers for the sis chipset. Seems to stuck after the win2000 (sp3) loading. Just before you enter you password. the screen just lock up. I can't do anything besides loading in safe mode. When i uninstall the driver, everything returns to normal.
here's my system :
win2000 sp3
pIV 2.53
Mobo is a MSI 648 MAX sis (ms-6585)
GFX is a msi ti-4200 128mo 8x
512RAM DDR333
PSupply is a 300w
not sure of the bios version, but it's easy to get. let me know if you need it.

alathgr,
Downoad the latest VIA (KT600) chipset Hyperion driver from http://www.viaarena.com/default.aspx?PageID=420&OSID=1&CatID=1070
Put the ATI card back in. Run the uninstall of the ATI card and run Driver Cleaner.
Install the VIA chipset driver.
Install the FX5700 card.
Install the nvidia VGA driver, its this one http://www.nvidia.com/object/winxp_175.16_whql.html

Problem with K9N6SGM-V MOBO and MSI NX800GT -TD256EH

This is my new graphic card and when I use windows it seem no problem but when i start play game it will hang and have to reset the PC.
I only tried on DOTA allstar and lineage 2.
Do i have to upgrade someting like BIOS or driver ..(I already used new graphic card driver from nvidia site)
Any advice.. tq
MSI K9N6SGM-V
AMD ATHLON X2 +4000
COSAIR 1X1GB DDR2
MSI NX8500GT TD256EH -256MB PCI-E
Seagate 200gb SATA
Microsoft Windows XP Home Edition SP2
STANDARD 450W

Read Moan Guide 1st

Problem with Dual Core Center and MSI 3870

Hello again, my previous thread is this:
https://forum-en.msi.com/index.php?topic=113164.0
The VGA works well, the problem is that AFTER i installed it the Dual Core Center stoped to work!!
Installed the dotnetfix again but no avail, still doesn't work.
And i know that happened after installed the VGA, so i believe that must be part of the problem.
Thanks!

Try the latest version of Dual Core Center.
You will find many alternatives for DCC here: https://forum-en.msi.com/index.php?topic=107133.0

MOVED: Serious problem with Asrock k7vt6 mobo and MSI fx5700le-td128!!!

This topic has been moved to VGA products.
https://forum-en.msi.com/index.php?topic=117270.0

alathgr,
Downoad the latest VIA (KT600) chipset Hyperion driver from http://www.viaarena.com/default.aspx?PageID=420&OSID=1&CatID=1070
Put the ATI card back in. Run the uninstall of the ATI card and run Driver Cleaner.
Install the VIA chipset driver.
Install the FX5700 card.
Install the nvidia VGA driver, its this one http://www.nvidia.com/object/winxp_175.16_whql.html

I am having problems with my hotmail email and new software update. It keeps asking me for my password even though the email account has been verified. Please help

It keeps asking me to re- enter the password. Is there something that I am doing wrong, the account has been verified but as soon as I exit out of settings it will ask me to re-enter my password.

I have done this and keeps saying the same thing. I have even tried setting my account through Microsoft exchange but no luck

Hello I have a problem with my Iphone 5S and it`s under warrenty it doesn`t turn on and a blue screen cames up and it doesn`t reset what can I do, I live in Argentina Buenos Aires, please contact me soon, thank you

Hello I have a problem with my Iphone 5S and it`s under warrenty it doesn`t turn on and a blue screen cames up and it doesn`t reset what can I do, I live in Argentina Buenos Aires, please contact me soon, thank you

Where did you purchase the phone? Then, you can use this support document to find out how to contact Apple Support from your location. Contact Apple for support and service - Apple Support

Problems with Cool N Quiet and MSI Live Update

Similar Messages

Maybe you are looking for