Problems with creating dvd

This is my first mac. I am trying to create a dvd with pictures. I created the slideshow fine. I added the song from itunes fine. when I try to preview the project, a message comes up saying that my computer is not authorized to play this song. I go back to itunes and authorize the computer, a message comes up saying that my computer is authorized. I go back to idvd and try to preview the project. again, I am told that my computer is not authorized to play this song. why?

Welcome to discussions, what's a mac!
Please give us more infromation about your mac. See the blue/green description of my ste up at the bottom of this post?
Please go to "My Settings" to the right and fill it out for us.
Until then, what version of QuickTime are you using? Upgrade QuickTime to 7.1.3
About iTunes Store authorization and deauthorization
http://docs.info.apple.com/article.html?artnum=93014
Finally, if all else fails, try burning the music to an audio CD and import from that.
Sue

Similar Messages

I am having problems with creating my apple id. On the phone it is advising me that the ID is not created and then when i do it online it says that it has been created. Can you advise me on what to do please?

I am having problems with creating my apple id. On the phone it is advising me that the ID is not created and then when i do it online it says that it has been created. Can you advise me on what to do please?

Apple ID FAQ http://support.apple.com/kb/HE37

Problem with create universe on Business Objects XI 3.1 base on SAP Query

Hello,
I have a problem with create universe on Business Objects XI 3.1 base on SAP Query.
The problem is hierarchy. Massage on Busines Objects is :
OWBS_ELEMT__ISTKOSZT(cube ICPC01/BEX_ICOC01):Exception condition "HIERARCHY NOT FOUND" raised.(WIS 10901)
Query in BEX run OK.
Best regards.
Ela.

Hello,
Thanks for response.
When I run BEX QUERY, all works OK.
All hierarchies was created and activated on system BW.
This situation appears after upgrade BW to SAP NetWeaver 7.3.
Before upgrade I created universe without any problems.
Regards Ela

Problem with creating new user in portal = portlet is not visible

Hi,
I've got a problem with creating new users in portal. In the Administer tab of the builder is the user portlet not visible.
How can I make this portlet visible?
Please Help
thank you...
Gilbert

Hi..my problem slightly similar.
I created one new user, and didn't select anything from "Public Groups Assignment" and "Privilege Assignment" for him.
I expect the user will be a public user.
But, when he try to logged in the portal,
He cannot see all the PORTLETS related to database values..
All he can see just LINKS -that all in my portal right now beside the report from database that the user cannot see :)
So, what did i do wrong?
Plz Advise, and thanks.

MOVED: Problem with SATA DVD/RW

This topic has been moved to AMD64 nVidia Based board.
Problem with SATA DVD/RW

I use the Plextor PX-712SA's with no issues. However...I do not believe the SATA versions require jumpers. Try plugging them in on SATA port 1 or 2, making sure those are enabled in BIOS of course. Make sure all connections are secure. There have been some issues with these particular drives not operating properly, but it has not been an issue with seasoned system builders, so the problems may be with the builder himself. Usually, Plextors are so good, they'll almost burn a paper plate! Try a different medium, maybe another brand of blank CD or DVD.
You may also want to check Device Manager in Windows, to see if it is listed "This device is working properly"!

Im having problem with the dvd quality, I'm using compressor to convert the video fils from apple prores to mpeg2 .It doesn't matter how long my video is even if its just 5 minutes I'm getting cut edges in the video , does anyone have any idea ?

Im having a problem with the dvd quality, I'm using compressor to convert the video fils from apple prores to mpeg2 .It doesn't matter how long my video is even if its just 5 minutes I'm getting cut edges/lines in the video specialy if i have titles it comes up really bad , I took the same video to a friend of mine who have PC and he uses Encore , did the encoding there and it was just fine no problems! BTW I tried using doferent setings in compressor from CBR and VBR I even pushed up the setings to 8 or 9 BR and still no luck !
does anyone have any idea ?
Thanks in advence ...

Let's focus attention on just the Sony. (What model and what resolution are you shooting?)
For now, I'll assume you're shooting 1080i.
Take a representaive clip into a new sequence. Add a title.
In your sequence, make sure field dominance is set to Upper.
Set render settings to Pro Res 422.
After rendering, export QT self contained.
Import into Compressor (I'm now referring to v3.5).
Select the 90 minute Best quality DVD preset.
Open frame controls and turn on (click the gear icon). Set Resize filter to Best.
Submit burn and check quality on TV.
Good luck.

Problem with copied DVDs--"DAMAGED TS FOLDER" (HELP or I shall go MAD!)

Hi folks--really, really hope someone can help me. This has got me beat. And I'm by no means sure it's a problem with my computer, but...
The facts:
1. I recently acquired a Panasonic DMR-ES20 DVD recorder, primarily to make DVD copies of a number of old and treasured videotapes. These are from broadcast, so copy protection isn't a factor.
2. I often use my Mac as a TV to watch DVDs and have never had the slightest problem with commercial DVDs.
3. I am (or was) using Roxio's Popcorn 2 program to make up backup copies of the DVDs I make.
4. I made about 20 DVDs without problem, and ALL work perfectly on the Imac, and ALL can be copied via Popcorn 2.
5. Then, SOMETHING CHANGED, I have no idea what--but now, each and every DVD I make with the Panasonic shows up on the Imac as follows:
"The TS folder appears to be damaged."
These disks will NOT play on the Imac and cannot be copied with Popcorn 2. They DO play on the Panasonic machine, however.
6. I have tried varying media, including high-quality Taiyo Yuden disks. That didn't help.
7. I have reset the recorder to original factory settings. That didn't help.
8. I have used a disk lens cleaner on the Imac. That didn't help.
9. I have spoken with Applecare and (God help me) Panasonic. Both pronounced themselves baffled.
10. As am I. As things stand, I've got a lot of more or less useless equipment. Ideas? Hints? Suggestions?
2 GZ PowerPC G5 Mac OS X (10.4.7)
2 GZ PowerPC G5 Mac OS X (10.4.7)
2 GZ PowerPC G5 Mac OS X (10.4.7)

The only time I have ever expierianced an issue like this is from doing extensive burning. The cause is from the storage of the cache files and some of the older TS folders even after you trashed them from your machine after you burned.
The only way I have been able to work around this is
First Repair Permissions as is submitted by Gulliver.
http://discussions.apple.com/thread.jspa?messageID=607640&#607640
I have also found that by running 3 freeware or shareware programs one right after the other and after the 3rd it will restart your computer all is well when I do it.
First run Macjanitor.
http://personalpages.tds.net/~brian_hill/downloads.html
Next run Cache Out X.
http://www.versiontracker.com/dyn/moreinfo/macosx/14850
And last but not least is ONYX.
take note when you run Cache out X and Onyx be careful to not delete your favorites in your browsers.
http://www.versiontracker.com/dyn/moreinfo/macosx/20070
A note of interest, I have had to do this after I have done a lot of copying to get rid of all the excesive junk that is left behind.
Give it a try.
Good Luck Don

Problems with burned DVD in iDVD - Works in some players, not in others

Hi, I'm having a strange problem with a DVD I burned in iDVD.
I have a disc image that I made in iDVD and then burn the Audio_TS and Video_TS folders to a DVD.
I burned to a Memorex DVD+R.
The video pops up fine and plays on my computer after it burns, but if I eject the disc and try to re-insert it, the DVD preview says "Supported disc not found". It did this same thing when I tried it in my Macbook.
It works fine in my standard DVD player, but I also tried it on my Playstation 3 and it did not play.
A few things I am going to try is buring directly from iDVD instead of first making a disc image, and also using DVD-R, although I heard that DVD+R is generally a better format to use.
Someone also told me that DVD+R does not play on macs, which I question.
If anyone has any other suggestions or might know why this is happening, I would greatly appreciate it. It is an important project that needs to be done soon! Thanks.
Message was edited by: Nathan Edwards1

The disc image option is within iDVD: File > Save as Disc Image. If you switch to DVD map map mode you can drag your movie to a spot prior to the menu so that the movie plays automatically when put into the player. Under advanced, you can set the movie to loop.... otherwise I think it goes back to the menu when done playing. BTW, all DVDs MUST have a menu it is part of the DVD specification. It is just a matter of whether you see the menu. As far as exporting your project back to tape... you won't loose any quality and your audio, along with your video and any editing to each will export back to tape. However, a MP3 is not generally considered a higher quality file (although perhaps the recorder was closer to the source?). As a matter of fact, if you are editing your audio I strongly suggest using a file sampled at at least 16-bit/48Khz, AIFF (or WAV or anything lossless).
In regards to the slow burn speed: I agree that a slower burn speed is better than the fastest burn speed (due to error corrections ect). However, I would choose a middle of the road burn speed. If my choices are 4x, 6x, or 8x, I would choose 6x. If it is 2x, 4x, 6x, I would choose 4x. And yes, quality of blank media can effect the playback of a disc that played once just fine.
Mike

Problem with creating site from another computer!

Hi
I have WebDB 2.2 and Oracle8i instaled on the same computer. I have a problem to create site from another computer. There is not any process when I try to create site. There is always 0%.
But I have no problem with creating site on the origin computer.
Does anybody know something about it?

I am just not clear what to do once I have made changes and have published the new information.
You shouldn't have to do anything. iWeb will save the information in the Domain.sites file. You can keep this file in a folder, or even on your desktop and iWeb will launch from a double-click on the file.

Problem with creating email account on E72

I have bought E72 and want to use mine company email - but there is a problem with creating email account in mail program.
Restoring to fabric settings doesn't works.
When I'm creating Gmail account it's OK, but phone doesnt want to cooperate with other accouns:/

Try again without using WLAN. I had same problem, but solved it using GPRS.

Problem with creating chapter-markers

Hi everyone,
as the title already says it, I've got a problem with creating chapter markers in Quicktime Pro 7.6.4. There's something wrong with the font, displayed in Quicktime. The problem first appeared a few days ago. Before this, everything went fine and I don't have a clue what causes the problem.
Please click HERE to see a screen-recording of the steps I do to create chapters:
- convert the chapters into unformatted text and save it as Unicode (UTF-16) text file.
- open it in Quicktime and everything (including the german umlauts) is displayed correct.
- export it into a Text-file with description
when I open the new text file in Quicktime, the fonts are displayed in asian letters, but when I view it in the Texteditor, the text is almost correct, BUT the umlauts are not ok. So I go on with...
- correct the umlauts and save a new file as Unicode (UTF-16) again.
After I open the new file in Quicktime, the text is completely gone. As the text file seems to be ok in the Texteditor, I guess there must be something wrong with Quicktime. I tried to reinstall Quicktime 7 from the "Mac OS X 10.6 Snow Leopard" Installation-Disc, but the problem persists.
I' would appreciate any help...
Thanks in advance and best regards,
Michael

I'm having the exact same issue. I have created my movie in IMovie 09 then under the "share " menu I sent the movie to iDVD. Everything looks fine on screen, but all I get on the final product is the movie.
After digging deeper into the tutorials all they show is dragging a movie into the idvd shell, not sharing via imovie.
Thus I'm currently attempting to create a quicktime movie then drag it into the IDVD shell. I think that way the chapter markers and everything should show up and burnt into the final project. I'm guessing the "share" option with the IDVD from iMovie doesn't work properly???

Problem with creating order through order template

Hi experts,
We have problem with creating order by order template. Extensions data available in order template is not sent to order. Extension data are showing upto order submission form. But after sucessful creation of order extension data are no longer available in CRM-ORDEr.
We are using ISA 4.0 with CRM 4.0.
We recently applied patches on CRM server. Before patching it was working fine.
Can you please suggest us to solve this issue?
Thanks in Advance.
Regards,
Murugan Arumugam.

closed.

Problem with Creating Info Record

Hello Gurus,
I've problem with Creating Info Record
i tried to create info record for Plant Specific/Purchase Org
The first Screen General Data is OK
i entered all the data in the next screen ie
Purchase Organization Data screen but i'm getting error
<b>Make an entry in all required fields</b>
but there is Mandatory Textbox ie "VALID TO" which im unable to select Bcos its Disabled
pls help me regarding this
thanks in advance

Hi
Have u given the net price. <b>VALID TO</b> is the date until which the price shown in the info record is valid.
If there is no price that is valid on the current date, the last-valid price is displayed and the date field contains the day before the start of the next validity period (this may be 12.31.9999 if there is no further validity date). If all validit periods lie beyond the current date, the price of the next period is displayed. The date field then contains the end date of this period.
These validity periods we will maintain Purchse data CONDITIONS while creating info record. Check the validity period for the conditions.
Hope this will helps u
Ravi
Ravikumar Bolla

Problem with creating virtual column

Hello,
We've got problem with creating virtual column.
There is table R_T that contain columns R_ID and L_ID, we would like to create virtual column RL_ID that contains sth like 'R_ID-L_ID' (R_ID, L_ID and RL_ID are varchars).
According documentation we've tried:
alter table R_T add column (RL_ID varchar2(60) generated always as (R_ID||'-'||L_ID) VIRTUAL)
but getting
ORA-00904: : invalid identifier
00904.00000 - "%s: invalid identifier"
Have no idea where is the problem.
Table, columns names are little different but contains only capital letters A - Z and underscore "_".
Has anyone idea?
Thanks a lot.

Strange...
This does work for me :
Connected to Oracle Database 11g Enterprise Edition Release 11.2.0.1.0
Connected as dev
SQL>
SQL> create table r_t (
2   r_id varchar2(25),
3   l_id varchar2(25)
4 );
Table created
SQL> insert into r_t (r_id, l_id) values('R','L');
1 row inserted
SQL> alter table r_t add (rl_id varchar2(60) generated always as (r_id||'-'||l_id) virtual);
Table altered
SQL> select * from r_t;
R_ID                      L_ID                      RL_ID
R                         L                         R-L
SQL>

Problem with burning DVD's

I have Roxio Toast Titanium and I have a problem with burning DVD's. When I put a blank DVD-R in my superdrive, select the files and go to burn; the advanced recording options will not let me deselect the check in "close disk". It is shaded. But when I use a CD-RW I can and so far the Roxio help has...well has not been help at all. I mean why would I spend the money to buy a software package that lets me do the same thing as the basic OS-X disk utility would let me do? Drag a file, burn it and close the disk from any future use....
Sorry if this does not belong here, I did not see a area for general software questions way back in the main forum area not one here.
Rob

Donald,
Hi and thank you.
To give you more details on what I am trying to do; I am trying to burn in Mac & PC format. I am mainly trying to back up all my assorted college files (I am a college student), these files are lecture notes in Word with embedded audio recordings, standard Word documents such as essays, etc., spreadsheets, PDF documents, etc. The files I am attempting to burn should not be larger than 4.7 gb and Roxio has not given me a warning that it would be.
I am just frustrated that when I put in a DVD-R or -RW I only have one option, and that is to close out the disk when it is finished burning it. I have also gone to the recording tab, on the menue bar, to uncheck the "close disk" box after I put in a blank DVD and before I select files to burn. The option is shadded preventing me from even trying, which is not the case for a CD!
Thank you!
12 PowerBook G4 Mac OS X (10.4.1)

Problems with creating dvd

Similar Messages

Maybe you are looking for