Problems with creation of an HEAP Dump

Dear all,
I have tried to create a HEAP Dump (CntrBreak) with the Java-based SAPMC Console (Process Table => server<no.> => DumpStack, but I get no dump on operation system (/usr/sap/<SID>/JC01/j2ee/cluster/server0/). I set the parameter -XX:HeapDumpOnOutOfMemoryError -XX:HeapDumpOnCtrlBreak in the VM. Our Java version is 1.4.12, the OS is Sun Solaris.
Did anyone know why it not functioned in our solution?
Many thanks in advanced.
Patrick

Hi,
The Java based MC should provide the same functionality as the MMC. I tested today to trigger a heap dump as you have described and I had success.
As the "Dump Stack" action is a protected one, the user should be asked for user/pass. Is it also for you so?
And I have found several notes describing problems with the authentication of the sapstartsrv user on different unix platforms. As there is no action at all logged in your case, I guess that this could be the problem.
Here are the notes I found:
[Note 927637 - Web service authentication in sapstartsrv as of Release 7.00|https://service.sap.com/sap/support/notes/927637]
[Note 992907 - sapstartsrv user authentication on Solaris|https://service.sap.com/sap/support/notes/992907]
I hope this helps.
Have you tried already to perform the action from an MMC?
Regards,
Krum

Similar Messages

Problems with creation of catalogue XPGrpwise and temporary

Problems with creation of catalogue XPGrpwise and temporary files.
I use GroupWise 8.01 and WinXP (SP2), OpenOffice 3.1.
Why at opening files in Library, temporary files are not created in catalogue C:\Documents and Settings\Jon Smith\Local Settings\Temp\XPGrpwise, and created in catalogue C:\Documents and Settings\Jon Smith\My Documents. That causes problems. How to change a situation that worked as it is necessary.
Catalogue XPGrpWise is created and leaves duly in catalogue C:\Documents and Settings\Jon Smith\Local Settings\Temp\.

Cvetaev,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://support.novell.com and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://forums.novell.com/faq.php
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://support.novell.com/forums/

Problem with Creation of TemSe file...

HI Experts...
Here im facing the problem with creation of # 3 rd Quarters
Temse file.when ever i use the tcode pc00_m40_f24 and entering the details of quater 3 ...here im showing up the ABAP Runtime error."""Overflow for arthimitic operation Type P in program HINCF240"".
What could be done to overcome the problem.Please advice.
Regards,
V Sai.

Hi experts/Sriram...
Thanks for the reply.
The -
>showing the line....
QS80_TAB-DEDMT=QS80_TAB-DEDMT+S80-DEDMT
Where should we change to get rid of this runtime error.
Here in my quality everthing is fine and we have uploaded patches in quality upto recent one sp80.But in prod. the patchlevel is sp71.Will it be the reason.
Please advice me on this as i have to complete the issue of F16.
Thanks and Regards,
V Sai.

There is any Performance problem with Creation of many Y or Z Programs.

HI,
There is any Performance problem with Creation of many Y or Z Programs. plz give clarity regarding this to me......
regards
ganesh

Ganesh,
Can you please mention the context and the purpose of creating these custom program. And application are you referring to?
Regards,
Rohit

Problem with creation of jar with external libraries

hi guys, I've no problem with creation of jar,i use this command:
jar -mcf MANIFEST.MF NameFile.jar *.class
my file manifest is this:
Manifest-Version: 1.0
Created-By: Me
Main-Class: NameFile
Now,I've to make a jar file,but i have to use some external libraries in jar format.
I've read on sun tutorial and i've added to manifest this line:
Class-Path: dt.jar formshelp.jar formsrt.jar jh.jar looks-1.3.1.jar substance.jar TableLayout.jar
But the jar file doesn't work, neither with a double click nor with console...
Someone can help me?Thanks!:)

Darkweb wrote:
sorry but,the external libraries that i use are in .jar,what i've to do to include these libraries in my jar?One of 3 things
1) Take them out of the jar, and put them in a folder, preferably a folder in the same folder as the jar
2) Write a custom classloader to load classes from nested jars
3) Extract the contents of all the dependency jars, and jar them all up with your own code
The first is almost always the most preferable, the second one is doable but brittle and resistent to updating dependencies ( you have to release everything for any changes you need, even if it's not a change in your own code ) and the third one is tedious and suffers from the same robustness problems of the second, not to mention that a lot of software licences prohibit you from actually doing it. Do the first one, it's by far the most common and easiest to maintain. I really wouldn't advise the third option, ever, though. Any activity that reduces the modularity of your application is ill-advised

Problem with creation of site (SMWP)

Hi All
I am currently working on SAP SRM 7.0 , middleware settings for master data replication from SAP ECC to SRM.
I am facing a strange issue. when I try to create a site for backend ECC system in transaction SMWP. When I click on site attributes for typr R/3 and give the ECC RFC destination , system throws an error "Logical System is not defined in target system".
I have checked multiple times in ECC and SRM ALE settings where logical system for SRM and ECC is correctly defined. There seems to be no problems with RFC connections also in both ECC and SRM as I am able to remote log in.
Kindly let me know what could be the possible reason for this issue
Awaiting your reply
Pawan Keshwani

Hi Nikhil
Thanks for your prompt reply. I have already checked this blog although I have doubts with my system Landscape definition.
While defining system landscape in "SPRO-> SRM Server-> Technical Basic settings->Define System Landscape" there are two attributes System Lanscape Directory Name and system Type. I might have put wrong information here.
Can you plz let me know what do you put in these fields? Is this information provided by BASIS team during installation?
Regards
Pawan

Problem with creation of KM content

Dear community,
i have a strange problem when creating content in Km wia Web Dynpro. (I have read all the blogs, sdn forum posts and SAP documentation on that issue so far - means I know how to access the KM, store content, create folders, etc).
My problem is:
I create text-files in KM (ending: properties) which contain simple key-value pairs of Strings. The files get created and everything is fine but somehow the KM treats them as binary file (MIME Type: Binary File (text)) and won't recognize them as "text/plain" (or FORTRAN source file (text/plain) as KM loves to call it...).
I created them via:
Content aContent = new Content(in, "text/plain", in.available());
but the content-type gets dumped somewhere on the way through the depths of SAP EPs KM.
Does anyone have a glue on to tell KM programmatically to make my file occur as "text/plain" so I can display them like I'd like to in the Portal?
Thanks for your help!
regards,
christian

i don't know if this helps.
i assume you have file like server.properties & the mime type is assumed to binary instead of normal plain text file.
Go System Admin -> System Config -> KM -> Content Management -> Utilities -> MIME Types ->
Define new mime type with properties as text/plain
Message was edited by:
Anant

Problem with Creation of Source module for MS Access

I am having a problem in creating a source module connected with an "MS Access" file in OWB 9i using the heterogeneous services. I have created a DSN to an access file (.mdb) and created the HS in Oracle (modified the tsnames.ora and listener.ora files with required details). Created a Database link using this service and it's working fine in SQL PLUS, but I am unable to create a Source module in OWB 9i using this db link, since OWB 9i need a schema name for db link. In MS access it's not possible to have a schema.
Please help me in solving the above issue.
Thanks in advance
Jagan

What version of OWB and Oracle database are you using? If it is an OWB version 9.0.4 or higher, I presume you are trying to create a non Oracle source module under the Oracle Database node - is this the case? If yes, you should not do that, but create your MS Access module under Databases->Other->Other node (as I understand you are not using ODBC). Let me know if my assumptions are correct.
Regards:
Igor

Problem with Creation of CRM Order via Function Module Test

I am trying to check the order creation process from external systems by using the test function in Tcode SE37 with Function Module BAPI_BUSPROCESSND_CREATEMULTI.
I have created a Test Sequence of the following FMs:
BAPI_BUSPROCESSND_PROCSETTINGS
BAPI_BUSPROCESSND_CREATEMULTI
BAPI_PROCESS_SAVE
BAPI_TRANSACTION_COMMIT
All that I have been able to create so far is an order header without a Sold-to or Ship-to and no items. I am able to populate the Organization data, Header text and Appointments. The only partner function that is being populated is the one that is being automatically picked up from my user master.
For the BAPI_BUSPROCESSND_CREATEMULTI I am populating the following tables:
HEADER          1 entry
ITEM               2 entries
PARTNER          2 entries
ORGANISATION     1 entry
APPOINTMENT          2 entries
INPUT_FIELDS          41 entries
SCHEDULELINE     2 entries
I have created the entries based upon information gained through debugging function module CRM_ORDER_MAINTAIN during the creation of a service order.
It would be interesting to know if anybody has successfully created an order via the SE37 test function and if so, it would be useful to see the data in the relevant tables.

HEllo ,
Write a wrapper to the function module CRM_ORDER_MAINTAIN.
To populate the Text use below code
ls_input_field_names-fieldname = 'REF_GUID'.
INSERT ls_input_field_names INTO TABLE lt_input_field_names.
ls_input_field_names-fieldname = 'REF_KIND'.
INSERT ls_input_field_names INTO TABLE lt_input_field_names.
ls_input_field_names-fieldname = 'TDID'.
INSERT ls_input_field_names INTO TABLE lt_input_field_names.
ls_input_field_names-fieldname = 'TDSPRAS'.
INSERT ls_input_field_names INTO TABLE lt_input_field_names.
ls_input_field_names-fieldname = 'TDSTYLE'.
INSERT ls_input_field_names INTO TABLE lt_input_field_names.
ls_input_field_names-fieldname = 'TDFORM'.
INSERT ls_input_field_names INTO TABLE lt_input_field_names.
ls_input_field_names-fieldname = 'LINES'.
INSERT ls_input_field_names INTO TABLE lt_input_field_names.
ls_input_field_names-fieldname = 'MODE'.
INSERT ls_input_field_names INTO TABLE lt_input_field_names.
CLEAR ls_input_fields.
ls_input_fields-ref_guid    = attr_guid.
ls_input_fields-ref_kind    = 'A'.
ls_input_fields-objectname = 'TEXTS'.
CONCATENATE 'CRM_ORDERH' order_guid INTO ls_input_fields-logical_key.
ls_input_fields-field_names = lt_input_field_names.
INSERT ls_input_fields INTO TABLE attr_t_inputfields.
Call Order maintain FM to create any order
CALL FUNCTION 'CRM_ORDER_MAINTAIN'
    EXPORTING
      it_text               = lp_order->attr_t_text
      it_partner          = lp_order->attr_t_partner
    IMPORTING
      et_exception     = et_exception
    CHANGING
      ct_orderadm_h     = lp_order->attr_t_orderadm_h
      ct_input_fields      = lp_order->attr_t_inputfields
    EXCEPTIONS
      error_occurred    = 1
      document_locked   = 2
      no_change_allowed = 3
      no_authority      = 4
      OTHERS            = 5.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Regards
Satish

Problem with creation of Sales Order with reference to Contract

Hi,
I have a problem when creating Sales order with reference to Contract , shipping condition was not copied. Is there any existing copy routines suitable to accomodate this?
Thanks!

your functional team can help you in finding one.

ACE - Problem with creation of selective BP Rule

Hello Experts,
I want to restrict the visibility of Accounts with ACE into CRM. The users should only have the right to see Accounts (Sold-to) with the same sales organization as himself.
Therefore if implemented the Interface Method GET_ACTORS_FROM_OBJECTS :
TYPES: BEGIN OF partner_data,
          partner         TYPE bu_partner,
          partner_guid    TYPE bu_partner_guid,
        END OF partner_data.
DATA: lt_partner_data TYPE TABLE OF partner_data,
        ls_partner_data TYPE partner_data,
        lv_guid TYPE bu_partner_guid,
        ls_object_guid TYPE crms_ace_object_guid,
        lv_rltyp       TYPE bu_partnerrole.
SELECT partner partner_guid FROM but000 INTO CORRESPONDING FIELDS OF TABLE lt_partner_data.
LOOP AT lt_partner_data INTO ls_partner_data.
    SELECT SINGLE rltyp FROM but100 INTO lv_rltyp WHERE partner = ls_partner_data-partner.
    IF lv_rltyp EQ 'CRM000'.
      ls_object_guid-object_guid = ls_partner_data-partner_guid.
      APPEND ls_object_guid TO ex_object_guid_table.
    ENDIF.
ENDLOOP
Everything works fine, and the users could only find the accounts which have the same sales organization as the user.
But now, the users couldn't find any contact person in the system.
My solution for that problem was to implement a second ACE rule, where the users get access to all other BP except Accounts.
For me, this solution is unsatisfactory!
In a system with about 100.000 Contacts this solution would significally degrade the performance. There will be thousands of entries in the ACE tables which weren't needed.
I only want to filter the Accounts mit ACE and nothing more.
Is there a possibility to filter only Accounts with ACE?
Regards
Steffen

Hi Steffen,
with the activation of ACE this is indeed one of those side effects.
isn't there any way to do some extra coding in the runtime check of ACE? If you can check there is the object the user wants to see is a person that would save you a lot of work.

Problem with creation of Bank Transfer file by standard Payment Wizard

Hello,
I am currently trying to check if the file created by the Payment Wizard is gathering the appropriate data for Bank transfer payment.
All the steps of the wizard are undergone successfully. However, no file is created or updated.
Do you have an idea of what would be related to this problem and what could be the solution ? All the bank and accounts information are in the database, so basically nothing is missing as for data.
Is the path for the file location important ?
Do I have to create the file before and with an appropriate format ?
Thank you for your help !
Francois

Hi,
First of all you need to verify that you have allocated a bank file format for the particular payment method. I assume that you have since you are able to successfully generate the payment run. Once you reach the last step which is step 9 of 9 where you are able to print reports carefully observe and locate the bank file icon to the bottom right of the screen. Once you click on that icon you will be able to select the output file location and need to complete the test run successfully whereafter you need to execute the production run. Once the production run has been completed the output file will have been generated.
Regards,
Andre

Problem with creation of follow-on activity in case, by action

Hi all,
Upon creation and saving of a case, I would like an action to automatically create an activity inside this case. When setting up actions for transactions, I have called the method 'COPY_DOCUMENT'. However, when called within a case, the method fails with an error.
Is there a way of configuring an action (in a case) to create an activity?
Any help or experience in the area would be greatly appreciated.
Thanks
Philip

Hi Kai,
You mean the initial value for the transaction type right? I had done this correctly. Basically I have defined the action in a way that works when the activity is created from another transaction. But it does not work when triggered from the Case.
Error message:
Exception Class CX_SY_MOVE_CAST_ERROR
Error Name MOVE_CAST_ERROR
Program CL_ACTION_EXECUTE=============CP
Include CL_ACTION_EXECUTE=============CM003
ABAP Class CL_ACTION_EXECUTE
Method GET_REF_OBJECT
Line 8
Long text During a 'CAST' operation ('?=' oder 'MOVE ? TO')a type conflict occurred. The source type
'\CLASS=CL_SCMG_CASE_PPF' is not compatible for assigning with the target type
'\CLASS=CL_DOC_CRM_ORDER'.
Thanks
Phil
Edited by: Philip Wroblewski on Jan 29, 2008 1:37 AM

Problem with creation of table

i have created one custom table with three fields. ( mandt(k),amount(K),desc)).
while creating the table for the first time i attached INT4 domain for the amount field.
since it want to compare with this value amount field in in the table (BSEG-WRBTR) it is no giving an error of inconsistent.
i have given delivery class : C and application as APPL1 .buffering not allowed.
Now if try to change the domain with CURR of length (13) is giving follwoing error log.
1 enhancement category is missing for the table (warning).
2. enhancement category for the subtype or include is missing.
3.table-amount field ( specify the reference table and field.
4.key field amount has type CURR buffering not possible.
5.activation of table is not possible.
Please help me in solving the problem.
regards
GB

Hi
First keep some CHAR field as KEY field in the table
You are keeping CURR field as Key field
and for Qty and amount fields always reference key field has to be mentioned
like VBAK-NETWR REF FIELD is VBAK-WAERK
for EKPO-MENGE ref field is EKPO-MEINS
3.table-amount field ( specify the reference table and field.
so give some vbak-waerk
4.key field amount has type CURR buffering not possible.
remove this field as key field and keep some CHAR field as Key field
5.activation of table is not possible.
Once you correct all of them it is activated.
1 enhancement category is missing for the table (warning).
2. enhancement category for the subtype or include is missing.
You can ignore them
or see the doc
Enhancement Category Selection
Structures and tables that were defined by SAP in the ABAP Dictionary can be enhanced subsequently by customers using Customizing includes or append structures. The enhancements do not only refer to structures/ tables themselves, but also to dependent structures that adopt the enhancement as an include or referenced structure. Append structures that only take effect at the end of the original structure can also cause shifts - in the case of dependent structures - even within these structures.
You must select an enhancement category for the following reason: In programs where there is no active Unicode check, enhancements to tables and structures can cause syntax and runtime errors during type checks and particularly in combination with deep structures.
In programs where there is an active Unicode check, statements, operand checks, and accesses with an offset and length are problematic - for example, if numeric or deep components are inserted into a purely character-type structure and the structure thus loses its character- type nature.
Depending on the structure definition, the radio buttons allowed in the dialog box are ready for input. Choose one of the possible enhancement categories:
Cannot be enhanced
The structure must not be enhanced.
Can be enhanced or character type
All structure components and their enhancements must be character-type (C, N, D, or T). The original structure and all enhancements through Customizing includes or through append structures are subject to this limitation.
Can be enhanced or character-type or numeric
The structure and its enhancement must not contain any deep data types (tables, references, strings).
Can be enhanced in any way
The structure and its enhancement may contain components whose data type can be of any type.
Not classified
This category can be chosen, for example, for a transition status; however, it must not be chosen for creating structures.
The rules for defining the enhancement category result implicitly from the structure setup and the classification of the types used. These rules are as follows:
If the object contains at least one numeric type or a substructure or component (field has a structure/table/view as its type) that can be enhanced numerically, the object can no longer be enhanced character-type, but is itself, at most, enhanceable character-type or numeric.
If the object contains a deep component (string, reference, or table type), or it contains a substructure or component that is marked as enhanceable in any way, then the object itself is enhanceable in any way.
If the object does not contain any substructure or component that is marked as enhanceable, you can select cannot be enhanced. If the structure has not yet been enhanced, you can choose the categorycannot be enhanced in any case.
If you are creating new tables and structures in the ABAP Dictionary, the system proposes the category can be enhanced in any way as standard value for the classification of the enhancement options. If the developer chooses a more restrictive classification than can be enhanced in any way for a particular structure, then only the classification levels that adhere to the rules above are allowed. It is not possible to choose an enhancement option of a structure that is more restrictive than the classification resulting immplicitly from the structure setup and from the classification of the types used. Therefore, only the allowed categories are proposed for selection in the maintenance user interface.
If a structure depends on one or several other structures, the smallest category is chosen as implicit classification (in the order cannot be enhanced < can be enhanced and character-type < can be enhanced and character-type or numeric < can be enhanced in any way). This classification is greater than or less than the category in the other structures and also greater than or the same as the category that results from the actual setup in the original structure itself.
For more information, refer to the online documentation (pushbutton "i").
Reward points for useful Answers
Regards
Anji

Problem with creation of dbadapter in jdeveloper using only jndi

Hi,
I´m new in this forum and first would like thank for the opportunity.
My problem is that have an application where i need to create a dbadapter for to connect a database.
I´m using bpel.
Would like known if there is a way of to make this without creating a local dbconnection in my project. I´m want to use only jndi that is in my Aplication Server.
For example : At the moment of creation of dbadapter, the wizard give me a dbconnection and below the jndi, is not possible i to create this connector using only the JNDI?
Thanks.

Hi,
Try using Open Data Set file for output to load in to application server.
The GUI_DOWNLOAD only gets the data to the presentation server,.
I think you are expecting the file in AS running GUI_Download gets only to Presentation Server.
Thanks & Regards,
Vishnu

Problems with creation of an HEAP Dump

Similar Messages

Maybe you are looking for