Problems with Custom Assertions in OSB with OWSM

Hi all, I try to get the custom assertion example from the documentation to work:
I have used the example about ValidateIpAssertions, and I have attached to a proxy service. I can debug it with eclipse, but I see that it's not running ok. I realize that the 'context message' is not informed in correct way in my debug tool.
I’m using OSB 11g Patch Set 2 with OWSM extension and Enterprise Console (SOA Suite is not installed). The admin server and managed server are running in the same domain (only one server).
Any suggestion?

I want to say that when I do a request trough a soapUi by example, the method getremoteAddr by example is null. one of the things more importants to me is to get the soap message. With version 10 I used the next expression with steps in order to get the message.
msgContext.getRequest().getAxisMessage().getSOAPPartAsString();
but now with assertions I dont know how to extract the soapmessage for working with it.

Similar Messages

OWSM Custom Assertion for OSB RESTful Proxy Service

Hello,
I have implemented a Custom OWSM Assertion to authenticate requests with a custom token placed in a HTTP header. I can assign this assertion to a SOAP proxy service as a security policy. However I am not able to assign the very same policy to a Restful JSON service (Proxy service defined as messaging service with text message type). I am getting this error:
[OSB Kernel:398128]One of the Web service policy attached is not allowed on service default/RESTful because the service binding does not support it
My policy:
<wsp:Policy xmlns="http://schemas.xmlsoap.org/ws/2004/09/policy"
 xmlns:custom="http://custom"
 orawsp:status="enabled"
 xmlns:wsu="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd"
 xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" orawsp:category="security"
 orawsp:attachTo="binding.server" wsu:Id="http_customtoken_authentication_policy"
 xmlns:orawsp="http://schemas.oracle.com/ws/2006/01/policy" xmlns:wsp="http://schemas.xmlsoap.org/ws/2004/09/policy"
 wsp:Name="custom/http_customtoken_authentication_policy">
 <custom:customTokenHttpAuthentication
 orawsp:Silent="true" orawsp:Enforced="true"
 orawsp:name="Http custom token Authentication" orawsp:category="security/authentication" >
 <orawsp:bindings>
 <orawsp:Config orawsp:name="authenticationassertion"
 orawsp:configType="declarative">
 <orawsp:PropertySet orawsp:name="headerName">
 <orawsp:Property orawsp:name="headerName"
 orawsp:type="string" orawsp:contentType="constant">
 <orawsp:Value>CustomToke</orawsp:Value>
 </orawsp:Property>
 </orawsp:PropertySet>
 </orawsp:Config>
 </orawsp:bindings>
 </custom:customTokenHttpAuthentication>
</wsp:Policy>
My OSB version is OSB 11g PS6 and in this version, OWSM policies are supported for Restful services. Interesting is, that the built-in policy oracle/http_basic_auth_over_ssl_service_policy can be assigned to my Restful service. Do you know a solution for the problem, how can I assign my custom assertion to the Restful service? Anything special is needed in the policy definition?
Thanks.
Marian

Hi Vinoth,
The users/groups are picked up from the LDAP configured in Security Realms->myRealm->Providers
You basically have 2 options:
- You can configure your LDAP in Providers
- Use the DefaultAuthenticator that weblogic provides you by default.
If you do not want to configure an LDAP, and want to use weblogic's default, then all you have to do is add users and groups in Security Realms->myRealm->Users and Groups
Do mark this as useful or answered, if this has helped.

Problem getting custom workflow to work with BPEL Worklist

I am currently working through the DocumentReviewWorklow custom workflow example in the Oracle Content Services 10g Custom Workflows document and cannot get the workflow to prompt approvers through the BPEL Worklist application that an action must be taken.
When I run the workflow, the process gets to the point of calling the TaskActionHandler and the approver is told that a process is pending their approval in the Content Services Console.
The following appears in the BPEL Process Manager when I Audit the workflow:
onMessage (137) - pending
[2006/03/20 08:57:42] Waiting for message from "TaskManagerService", operation is "onTaskSuspended".
onMessage (126) - pending
[2006/03/20 08:57:42] Waiting for message from "TaskManagerService", operation is "onTaskUpdated".
onMessage (118) - pending
[2006/03/20 08:57:42] Waiting for message from "TaskManagerService", operation is "onTaskErrored".
onMessage (110) - pending
[2006/03/20 08:57:42] Waiting for message from "TaskManagerService", operation is "onTaskWithdrawn".
onMessage (102) - pending
[2006/03/20 08:57:42] Waiting for message from "TaskManagerService", operation is "onTaskCompleted".
onAlarm (161) - pending
[2006/03/20 08:57:42] Alarm started. Alarm will go off at time "2006/03/22 08:57:42".
onAlarm (156) - pending
[2006/03/20 08:57:42] Alarm started. Alarm will go off at time "never".
onAlarm (151) - pending
[2006/03/20 08:57:42] Alarm started. Alarm will go off at time "never".
After a period of time, the workflow eventually times-out because it is neither approved or disapproved. I have got the other non-blocking custom workflow examples to work without any problems.

Thanks bnainani, you solved my problem!
Despite the fact that the approver's username is in the Oracle Collabortion Suite OID as all lower case letters (and you can still login to worklist with lower case letters), you were right in saying that you have to use all upper case letters when logging into the worklist application in order to see the pending tasks.
Just out of curiousity, do you have any idea why worklist requires upper case letters for the username?
Message was edited by:
middaymag
Message was edited by:
middaymag

Custom WS Policy with Service account in OSB while invoking a https service

Hi,
I need your help on one of my issue in invoking an https service from OSB. I read through various posting and tried the below steps in this forum
-Added the certificate for the https site to soa domain
-Registered the https webservice as a Business service
-Registerd a proxy service on top of this Business service
-In the service call out on Proxy service I did a replace operation on the entire soap header with the below string
<soapenv:Header xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/">
<wsse:Security soapenv:mustUnderstand="1" xmlns:wsse="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-secext-1.0.xsd">
 <wsse:UsernameToken wsu:Id="UsernameToken-4" xmlns:wsu="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd">
 <wsse:Username>sysuser@yahoo</wsse:Username>
 <wsse:Password Type="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-username-token-profile-1.0#PasswordText">ABIHAIKLPLKLPMLERLER</wsse:Password>
 </wsse:UsernameToken>
</wsse:Security>
</soapenv:Header>
-After doing all the above steps my call out worked from the test console, If you see closely the userid(sysuser@yahoo) and password(ABIHAIKLPLKLPMLERLER) is hard coded here.
I need a way to mask the credentials and have the user pass them when they invoke the proxy service. I read through some posting and it was listed that we can create a custom policy and attach that custom policy to the Business service. But my problem here is the userid has an extra char @, so I wasn't able to create the user account with those credentials in OSB, but I was able to create the userid and password using a service account. Iam not sure how I can use this service account along with the custom policy.
Can you please provide me a suitable approach, which will solve my issue. I appreciate your time and help
Thanks
Jagan.

Hi,
Below are the steps followed
- OSB Proxy service has 'oracle/wss_username_token_service_policy' attached to it.
- Iam invoking this from BPEL. BPEL process has 'oracle/wss_username_token_client_policy' attached.
- I can invoke the osb proxy from bpel by passing credentials - No Issues.
Now I need to put some authorization restriction to the proxy service, so only specific users can access that.
-I used Role=Admin as a policy condition restriction under security in Proxy service.
-Then I went to proxy test console and I added the 'oracle/wss_username_token_client_policy' credentials and weblogic/xxxxx at Transport section and I was able to invoke the process. Here weblogic has a Admin Role.
-I cannot invoke the same proxy service from BPEL in Jdeveloper now.
All Iam trying to do is to protect my proxy by authrorization policy.
Thanks
Jagan.

Problems with Custom File Info Panel and Dublin Core

I'm creating a custom file info panel that uses the values of the dublin core description and keywords (subject) for two of it's own fields. I'm having problems with the panel saving if they enter the description on the custom panel first, and with the keywords not echoing each other, or reappearing after a save. Here is the code for the panel <?xml version="1.0"> <!DOCTYPE panel SYSTEM "http://ns.adobe.com/custompanels/1.0"> <panel title="$$$/matthew/FBPanelName=Testing for Matthew" version="1" type="custom_panel"> group(placement: place_column, spacing:gSpace, horizontal: align_fill, vertical: align_top) { group(placement: place_row, spacing: gSpace, horizontal: align_fill, vertical: align_top) { static_text(name: '$$$/matthew/keywords = Keywords', font: font_big_right, vertical: align_center); edit_text(fbname: '$$$/matthew/keywordsFB = Keywords', locked: false, height: 60, v_scroller: true, horizontal: align_fill, xmp_ns_prefix: 'dc', xmp_namespace: 'http://purl.org/dc/elements/1.1/', xmp_path: 'subject'); } group(placement: place_row, spacing: gSpace, horizontal: align_fill, vertical: align_top) { static_text(name: '$$$/matthew/description = Description', font: font_big_right, vertical: align_center); edit_text(fbname: '$$$/matthew/descriptionFB = Description', locked: false, height: 60, v_scroller: true, horizontal: align_fill, xmp_ns_prefix: 'dc', xmp_namespace: 'http://purl.org/dc/elements/1.1/', xmp_path: 'description'); } group(placement: place_row, spacing: gSpace, horizontal: align_fill, vertical: align_top) { static_text(name: '$$$/matthew/season = Season', font: font_big_right, vertical: align_center); popup(fbname: '$$$/matthew/seasonFB = Season', items: '$$$/matthew/Season/Items={};option 3{option 3};option 2{option 2};option 1{option 1}', xmp_namespace:'http://monkeys.com/demo/testingmatthew/namespace/', xmp_ns_prefix:'matthew', xmp_path:'season'); } group(placement: place_row, spacing: gSpace, horizontal: align_fill, vertical: align_top) { static_text(name: '$$$/matthew/ltf = Limited Text Field', font: font_big_right, vertical: align_center); edit_text(fbname: '$$$/matthew/ltf = Limited Text Field', locked: false, horizontal: align_fill, xmp_namespace:'http://monkeys.com/demo/testingmatthew/namespace/ ', xmp_ns_prefix:'matthew', xmp_path:'ltf'); } } </panel> Thanks for the help

To answer my own question:
The documentation really sucks.
I found this reply from Adobe <http://forums.adobe.com/message/2540890#2540890>
usually we recommend to install custom panels into the "user" location at:
WINDOWS XP: C:\Documents and Settings\username\Application Data\Adobe\XMP\Custom File Info Panels\2.0\panels\
WINDOWS VISTA: C\Users\username\AppData\Roaming\Adobe\XMP\Custom File Info Panels\2.0\panels\
MAC OS: /user/username/Application Data/Adobe/XMP/Custom File Info Panels/2.0/panels/
The reason why your panels did not work properly was a missing Flash trust file for that user location. Without such a trust file the embedded flash player refuses to "play" your custom panel.
Please see section "Trust files for custom panels" in the XMPFileInfo SDK Programmer's Guide on page 50 for all details on how to create such trust files.
After many wasted hours I have now the simple panels running.
Cheers,
H.Sup

Problem with custom paper size on dot matrix printer

Hi All,
I'm using CR2008 with updated to SP2. I have a problem with custom paper size (W=21; H=14), the CR Viewer show report with custom paper size correctly but when I print it to a dot matrix printer (Epson LQ 300+) the content was rotated to landscape. If print to a laser printer the content was printed correctly. My report was printed correctly by CR10 or previous versions I got this issue when upgraded to CR2008. I aslo tested my computer and printer with orther application like MS Word the printing have no problem with custom paper size.
Thanks for any advice for me.
Han

Looking at the Epson LQ 300+ driver, I see that the latest update is from 2002. In my experience, most matrix printer drivers are not unicode. Crystal Reports is designed to only work with unicode printer drivers. See the [How Printer Driver Options Affect a Report|https://www.sdn.sap.com/irj/boc/index?rid=/library/uuid/a09051e9-721e-2b10-11b6-f9c65c64ef29&overridelayout=true] article, page 6 for details. Also, see [this|https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes_boj/sdn_oss_boj_dev/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/scn_bosap/notes.do] note.
Finally, see if you can print from the CR designer to this printer and if you get the correct results here.
Ludek

Problem with customer exit variable that is input ready as well

Hello all,
I'm facing an issue with a customer exit variable that again has been defined as input ready. I'm not sure why it is working incorrectly and I#m wondering if this is a bug or if I do s.th. stupid.
The problem is that in the exit program ZXRSRU01 this varibale does not go into the program code I have prepared for this variable. I have added entry points for all three i_step values 1,2,3, but the code will never be touched and in debugging I can see that it simply pypasses the code for this variable.
I have tried to enter a value or to leave it blank, no difference.
When I run another test by just using a customer exit variable w/o input ready capability, then I have no issue, the exit does exactly what I have coded.
Does this mean, that a customer exit variable along with input readiness dows not work ?????
You may ask why I need this variable. Well, my intention is to use the input value of this variable A to derive other values for a complete different variable B. Afterwards I want to erase the input given into variable A to have it blank.
Any comments are appreciated
Thanks

Hi Heiko,
I assume A & B variables are defined on different Characteristics. If you wish to derive B based on A, you can create the Query Characteristic Restriction on B & have a dummy RKF restricted on A whose processing is by Manual Input; where processing of B is by Customer Exit. In istep 2 you can check for B, read A & derive B. There would not be a need to blank out A since the Query would not be restricted on A - you can hide the dummy RKF from showing in the output. Just a thought.
--Priya

Problem with Customer Interaction Module in Web Channel Builder

Hello Everyone,
Facing an issue with Web Channel Builder Customer Interaction Module.
In Web channel builder we have done all the required configuration changes, but still we are not able to get the reviews and rating part in the product detail page.
We have created a new application and all the other module are working fine ,but the only module that is causing problem is Customer Interaction module. Every time we are activating this module rest modules stops working.
Can anyone please let us know what could be the root cause of this problem.
Are there any setting that has to be done ...that we are missing in?
I have studied that Product Catalogue is integrated with this module. Are there any setting that are to be done in the Product Catalogue module in Web channel builder?
Thanks in advance!
Regards,
PB

Hi PB,
Did you please get any proper error / exception in log file? Did you please check the web.xml as well that there is no same application name defined.
Can you please also copy paste the log please.
Thanks,
Hamendra

Problems with customer text objects in ZDEBMAS definition

Hi
   We have a Z* version ( ZDEBMAS ) of std customer chg pointer msg type DEBMAS - this ZDEBMAS is a shortened version of DEBMAS
We notice that whenever customer related texts are changed in customer master, change pointer objects with CD class - CUSTTEXT, TABLE-STXH get generated for the DEBMAS msg type. No such change pointer data gets generated for my ZDEBMAS.
I do not see any CD class with 'CUSSTEXT' entry in the definition of DEBMAS message type -bd52.
I basically want to replicate the customer text data change pointer generation functionality for my 'ZDEBMAS' msg type too ? Any pointers so to what I am missing ?
We are at a very critical stage of implementing the Z* solution - any pointers will be rewarded right away ....

Hi Abdul
         Thanks for the quick response. Yes the change pointers are activated globally ( bd61 ) and the change pointer is activated for ZDEBMAS ( bd50 ). The problem here is that - change pointer data gets generated in ZDEBMAS for other customer related fields - the problem is with customer text fields - the change pointer data does not get generated for customer text fields in ZDEBMAS - whereas it gets generated for DEBMAS - I am wondering why and how ?? ( since DEBMAS does not have an explicity CUSTTEXT - object class in its definition ) . Also, when I try to add this object class as a part of ZDEBMAS , I get an error message that this object class does not exist

Problem using multiple choice LOV with custom attribute in IAS 10.1.2.0.2

Hi
When aplying a multiple choice and selecting multiple selection and saving in the content area , everything looks fine .
However when looking at the page the selection is only the first one selected and not the miltiple choices I made
can someone tell me what is going on , does the miltiple selection with custom attribute
works ??
thanks in advance
Igal

Hi there,
I don't really understand what you're doing but I used lot of LOV in custom attributes on my custom items and everything works fine.
Can you explain more your problem ?

Owsm and OSB with sign policy

Hi,
I made a 10.3 proxy service with a sign policy , added a service key provider and configured wls / wsdl.
I need to provide a xml signature in the osb tester else I get an exception.
When I use the proxy service tester in OSB and select the service provider. then it works perfectly. In the output window I get an request and response with wsse security.
Now when I use OWSM with xml signature with the same jks keystore and use the same alias and call this OSB proxy server with the xml signature generated by owsm, I got an wssecurity exception , could not validate signature using any of the supported token types.
maybe someone can help me

Hi,
I didn't solve it, soapUI is nice for testing but I needed to make this work for production.
I will wait for fmw 11g

I am having trouble with custom color settings. It randomly reverts back to North American General Purpose without warning. This is a big problem for me. My customers (professional photographers) expect consist colors in my printing. Help!

I am having trouble with custom color settings. It randomly reverts back to North American General Purpose without warning. This is a big problem for me. My customers (professional photographers) expect consist colors in my printing. Help!

Do you even know how to nuke and re-set Photoshop's preferences, colorplak? Your last post seems to reveal that you don't understand what I'm talking about. Here's a link you can click on:
Preference file functions, names, locations | Photoshop CC
To re-create the preferences files for Photoshop, start the application while holding down Ctrl+Alt+Shift (Windows) or Command+Option+Shift (Mac OS). Then, click Yes to the message, "Delete the Adobe Photoshop Settings file?"
Note: If this process doesn't work for you while you're using a wireless (bluetooth) keyboard, attach a wired keyboard and retry.
Important: If you re-create the preferences by deleting the Adobe Photoshop CC Settings file, make sure that you only delete that file. If you delete the entire settings folder, you also delete any unsaved actions or presets.
Reinstalling Photoshop does not remove the preferences file. Before reinstalling Photoshop, re-create your preferences.
Note for Photoshop 14.1 and later: If you use Generator and reset your Preferences, Generator is disabled. Choose Preferences > Plug-ins to turn it back on.
Video: Julieanne Kost created a video that takes you through two ways of resetting your Photoshop preferences. The manual preference file removal method is between 0:00 - 5:05. The keyboard shortcut method is between 5:05 - 8:18. The video is located here.
Mac OS
Important: Apple made the user library folder hidden by default with the release of Mac OS X 10.7. If you require access to files in the hidden library folder to perform Adobe-related troubleshooting, see How to access hidden user library files.

Problem with custom navigation bar

I'm trying to create a custom left navigation bar with adaptive tag. when user click on the link it will direct to a pagelet which is created with page template. How can I do it? I don't understand what is pt:objectid? Where can I look for answer? I just need a simple example. Thank you.

You can get the object id from the "Edit this Community" feature under "My Communities" then look in "properties and names". If you look in the address bar you could also see the objid in there (objId=1234). I was having problems with this too.
What I did was use the ptdata tag like this:
<div id="topNav">
<pt:ptdata.currentcommunityiddata pt:id="currcomm" />
<pt:ptdata.subcommunitiesdata pt:commid="1234" pt:id="subcommunityPages" />
<ul>
<pt:standard.choose>
<pt:standard.when pt:test="isMatch" pt:str1="$currcomm.objid" pt:str2="3217">
<li class="down">
</pt:standard.when>
<pt:standard.otherwise>
<li>
</pt:standard.otherwise>
</pt:standard.choose>
<pt:standard.openerlink pt:objectid="3217" pt:classid="512" pt:mode="2">Home</pt:standard.openerlink>
</li>
<pt:logic.foreach pt:data="subcommunityPages" pt:var="varCommunityPage">
<pt:standard.choose>
<pt:standard.when pt:test="isMatch" pt:str1="$currcomm.objid" pt:str2="$varCommunityPage.objid">
<li class="down">
</pt:standard.when>
<pt:standard.otherwise>
<li>
</pt:standard.otherwise>
</pt:standard.choose>
<pt:core.html pt:tag="a" href="$varCommunityPage.url" title="$varCommunityPage.title">
<pt:logic.value pt:value="$varCommunityPage.title"/>
</pt:core.html>
</li>
</pt:logic.foreach>
</ul>
</div>
This is for a community that has subcommunities. you could also do the same thing with pages instead.
Short explaination:
This line sets up a data object for the current community data and assigns it the variable name "currcomm":
<pt:ptdata.currentcommunityiddata pt:id="currcomm" />
This line gets the subcommunities for a particular community (in this case commid="1234" ). You specify which community with the pt:commid.
<pt:ptdata.subcommunitiesdata pt:commid="1234" pt:id="subcommunityPages" />
I used a <ul> for it but you could really do it any way you want.
I added a static "home" tab that will always link to my top level page of the community. this is optional and there may be a better way of doing it:
<pt:standard.choose>
<pt:standard.when pt:test="isMatch" pt:str1="$currcomm.objid" pt:str2="3217">
<li class="down">
</pt:standard.when>
<pt:standard.otherwise>
<li>
</pt:standard.otherwise>
</pt:standard.choose>
<pt:standard.openerlink pt:objectid="3217" pt:classid="512" pt:mode="2">Home</pt:standard.openerlink>
</li>
for a link to your page you can use this tag. You can get both the objectid and classid from the "properties and names" page as mentioned above. pt:mode is how/what should be displayed (The action of the link (Opener mode). 1 = Open, 2 = View, 3 =ViewMeta.)
<pt:standard.openerlink pt:objectid="3217" pt:classid="512" pt:mode="2">
I also have a choose in there to test if the current community you're in is the same as the community of the link. That lets me add a class="down" for a down state. 
This loops through all the subcommunities and builds a link in this format <li>TITLE OF COMMUNITY</li>. 
<pt:logic.foreach pt:data="subcommunityPages" pt:var="varCommunityPage">
<pt:standard.choose>
<pt:standard.when pt:test="isMatch" pt:str1="$currcomm.objid" pt:str2="$varCommunityPage.objid">
<li class="down">
</pt:standard.when>
<pt:standard.otherwise>
<li>
</pt:standard.otherwise>
</pt:standard.choose>
<pt:core.html pt:tag="a" href="$varCommunityPage.url" title="$varCommunityPage.title">
<pt:logic.value pt:value="$varCommunityPage.title"/>
</pt:core.html>
</li>
</pt:logic.foreach>

Hopefully that is what you're trying to do.
Like I said, you can use the same process for pages instead of subcommunities by using the communitypagesdata tag instead of subcommunitiesdata. You could also combine the two and list all the subcommunities with a foreach loop and inside each loop get the pages from the communitypagesdata with the commid set to the subcommunity objid for that subcommunity.
THis document is very helpful with PT tags... [url http://e-docs.bea.com/alui/devdoc/docs60/References/API_Libraries/TagDocs/index.html]http://e-docs.bea.com/alui/devdoc/docs60/References/API_Libraries/TagDocs/index.html
-Matt
Edited by thelimpingtoad at 03/14/2008 5:55 AM

Problems with Custom Paper Size and Address Book

I'm having some trouble printing from Address Book onto a custom paper size. I'm attempting to set up a notecard, and only print one at a time, rather than multiple columns as in the Labels option. The trouble is that when creating this small size, Address Book doesn't recognize it as anything other than a regular sheet of US Letter, and thus prints the address in the middle of the page.
I have no problem printing envelopes, though, which seems odd because they too go in the manual feed for my printer. The notecards are similar width to the envelopes, but only about half the length.
Has anyone else experienced problems with custom paper sizes printing improperly? I'm using an HP 4515 LaserJet, but have access to a few other laser printers. Thanks for any insight

I have had the same problem, and with the same result; Adobe Tech Support can't help or fix, after 15 hours on phone, Level 2 support. It is a software bug Adobe has, and can't seem to fix. I just upgraded to Lightroom CC, and my problem migrated with the upgrade. I print in Photoshop fine.
If you found an answer, I would appreciate knowing how to do it!
Thanks

Problems with custom buttons

I have problems with custom buttons in Captivate 5. The button is not switching from the _up stage to _over stage, but when I click on it the _down stage works fine. It is not a problem with the naming of the buttons. They are all with the same name and in lower case. I have tried with various custom buttons and the problem is the same. There is no problems with the standard buttons from the Adobe Gallery, so it is a bit strange, also strange that it is only the _over stage that causes problems.
The buttons I have made in Adobe Illustrator. Have tried both exporting in png and bmp format. It is the same problem.
Hope someone has some idea as to what can be wrong.

Hi Manish,
I have uploaded the zip file with the button files to Acrobat and mailed you the link.
Look forward to hear if you find a reason or more importantly a solution :-)
Kind regards
Rene

Problems with Custom Assertions in OSB with OWSM

Similar Messages

Maybe you are looking for