Problems with D-Bus

Hello, each time I make a "/etc/rc.d/dbus restart"
I have the same error message :
Unknown username "named" in message bus configuration file
How can I fix it?
thank's for your help

paul2lv wrote:pacman -Sy bind
Thank's a lot...
Problem Solved!!!

Similar Messages

  • Problem with doing bus to Aux/live rack unit sends

    Hi all,
    Just recently bought a compressor and a Spring Reverb... both rack units (not plug ins).... both with (1/4'') IO.
    My plan was to do a Bs send to an Aux. that utilized the IO plug in (routing a send and return to one of my new units). There after, I was hoping I could use the Bus send on the audio source track to send to the Aux/effect and then have a blend of dry and effected signal overall.
    I think I missing something because with both units I have and issue where I hear a very unpleasant double sound and I'm fighting feed back... this is the case if I put the IO plug in on the source track and the Aux... so I figure that's where my problems lies...
    Can anyone see what I might be doing wrong?
    Huge thanks for any help.
    Best,
    Ben

    Why do you put the IO on both tracks? I would use it solely on the aux track.
    Eddie

  • Problem with firewire bus

    working in final cut pro,  when i now plug drives into to frontside firewire 800 port they are running very slowly and when playing a clip fcp freezes up and i have to force quit. when i plug the drives into the backside fw port or use on my macbook pro they work fine so i'm pretty sure problem is wih frontside port. the device does show up on the system profiler. is there a way to tell from that there's a performance problem. are there any easy fixes for the port? is there a way to reset the bus. thanks. 

    unplugging is not 100% reliable resetting the SMC.
    Hitting the power on button for 10 seconds while unplugged (and everything else too) may.
    The older models like 3,1 all had different directions when they came out (1,1 and 2,1 even have a physical SMC button yu can access and use).

  • Problem with Gnome and D-Bus

    Hi to all, i have a problem with Gnome and D-Bus
    Versions:
    Arch Release: 0.7.2 Testing
    Gnome:   2.14.1-2
    D-Bus: 0.61-3
    Screenshot explain all:
    [URL=http://img366.imageshack.us/my.php?image=gpwned6be.jpg][/URL]

    1>then i can't promote garnome on this forum??
    yeah you can, but not as a solution to gnome related problem in arch. cause this doesn't resolve anything.
    2>You don't have to, garnome2.14.2.1(481kb) download the patches and patch it automatically, just change install dir to /usr
    (ONLY if you are using console-linux who want gnome a try). of course there is need small arch related patch.(in my experience 0)
    eh, i haven't got a clue what this means, putting patches upstream means they will get include in gargnome and upstream releases. i only tried to say we put a lot of our free time in gnome for arch.
    2-1>Well said, so choice is the each one's freedom.
    and this category isn't arch, this is Desktop Environments,
    i installed arch, BUT THAT DOESN'T MEANS I SHOULD USE gnome FROM ARCH!!!
    agreed, but again then we won't support your desktop.
    ARCH != gnome
    3>some bug stuff about Xorg-7.0, include mine
    http://bbs.archlinux.org/viewtopic.php?t=22210[/quote]
    ah bugs.archlinux.org so it can be fixed.

  • Got a problem with BIOS in my board MSI 785GM-E51

    i have a MSI 785GM-E51 board,i got a problem with the graphic card bus interface,it still run in 8x not in 16x
    i try to disable a onboard graphic on BIOS,but i not find it.
    and last i try to update BIOS to v2.4 n' not work too.
    this a example;

    Quote from: Bas on 08-March-10, 21:21:36
    You do not need to disable the onboard.
    As for the plug-in card, there is nothing in the BIOS to make it work 8x or 16x.
    Make sure your card is seated correctly, else it will work but at lower number of lanes.
    What program is telling you it's 8x?
    GPU-Z

  • Some problems with 3D with xorg 1.9.2-1 and xf86-video-intel 2.12.0-3

    I have some problems with the upgrade to xorg 1.9.1-1 and xf86-video-intel 2.12.0-3. Glxgears does not run smoothly at all and I got 15-20 fps (instead of the normal 60 because intel should sync with the V refresh rate). Very curiously, these problems disapear if I move the mouse cursor somewhere in the screen. Then glxgears run smooth and I have indeed the expected 60 fps
    There are no error messages and glxinfo say that 3D is indeed enabled.
    Xorg log file:
    [ 358.899] _XSERVTransSocketOpenCOTSServer: Unable to open socket for inet6
    [ 358.899] _XSERVTransOpen: transport open failed for inet6/myhost:0
    [ 358.899] _XSERVTransMakeAllCOTSServerListeners: failed to open listener for inet6
    [ 358.900]
    X.Org X Server 1.9.2
    Release Date: 2010-10-30
    [ 358.900] X Protocol Version 11, Revision 0
    [ 358.900] Build Operating System: Linux 2.6.35-ARCH i686
    [ 358.900] Current Operating System: Linux myhost 2.6.35-ARCH #1 SMP PREEMPT Sat Oct 30 19:57:05 UTC 2010 i686
    [ 358.900] Kernel command line: root=/dev/disk/by-uuid/e5c72fc3-4e8b-4f5d-9023-12216af63d84 resume=/dev/disk/by-uuid/96f14b75-fb64-4881-863d-124af7c13e2f ro
    [ 358.900] Build Date: 01 November 2010 10:23:07PM
    [ 358.900]
    [ 358.900] Current version of pixman: 0.18.4
    [ 358.900] Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
    [ 358.900] Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    [ 358.900] (==) Log file: "/var/log/Xorg.0.log", Time: Tue Nov 9 10:14:10 2010
    [ 358.900] (==) Using config file: "/etc/X11/xorg.conf"
    [ 358.901] (==) Using config directory: "/etc/X11/xorg.conf.d"
    [ 358.901] (==) ServerLayout "X.org Configured"
    [ 358.901] (**) |-->Screen "Screen0" (0)
    [ 358.901] (**) | |-->Monitor "Monitor0"
    [ 358.901] (**) | |-->Device "Card0"
    [ 358.901] (**) |-->Input Device "Mouse0"
    [ 358.901] (**) |-->Input Device "touchpad"
    [ 358.901] (**) |-->Input Device "Keyboard0"
    [ 358.901] (**) Option "DontZap" "off"
    [ 358.901] (**) Option "StandbyTime" "5"
    [ 358.901] (**) Option "SuspendTime" "5"
    [ 358.901] (**) Option "OffTime" "5"
    [ 358.901] (**) Option "Xinerama" "on"
    [ 358.901] (**) Option "AutoAddDevices" "off"
    [ 358.901] (**) Not automatically adding devices
    [ 358.901] (==) Automatically enabling devices
    [ 358.902] (**) Xinerama: enabled
    [ 358.902] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
    [ 358.902] Entry deleted from font path.
    [ 358.902] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
    [ 358.902] Entry deleted from font path.
    [ 358.902] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
    [ 358.902] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
    [ 358.902] Entry deleted from font path.
    [ 358.902] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
    [ 358.902] Entry deleted from font path.
    [ 358.902] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
    [ 358.902] (**) FontPath set to:
    /usr/share/fonts/misc/,
    /usr/share/fonts/TTF/,
    /usr/share/fonts/Type1/,
    /usr/share/fonts/75dpi/,
    /usr/share/fonts/misc/,
    /usr/share/fonts/TTF/,
    /usr/share/fonts/Type1/,
    /usr/share/fonts/75dpi/
    [ 358.902] (**) ModulePath set to "/usr/lib/xorg/modules"
    [ 358.902] (II) Loader magic: 0x81f1f80
    [ 358.902] (II) Module ABI versions:
    [ 358.902] X.Org ANSI C Emulation: 0.4
    [ 358.902] X.Org Video Driver: 8.0
    [ 358.902] X.Org XInput driver : 11.0
    [ 358.902] X.Org Server Extension : 4.0
    [ 358.903] (--) PCI:*(0:0:2:0) 8086:27a2:1584:9916 rev 3, Mem @ 0xb0080000/524288, 0xc0000000/268435456, 0xb0040000/262144, I/O @ 0x00001800/8
    [ 358.903] (--) PCI: (0:0:2:1) 8086:27a6:1584:9916 rev 3, Mem @ 0xb0100000/524288
    [ 358.904] (II) Open ACPI successful (/var/run/acpid.socket)
    [ 358.904] (II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
    [ 358.904] (II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
    [ 358.904] (II) "glx" will be loaded. This was enabled by default and also specified in the config file.
    [ 358.904] (II) "record" will be loaded. This was enabled by default and also specified in the config file.
    [ 358.904] (II) "dri" will be loaded. This was enabled by default and also specified in the config file.
    [ 358.904] (II) "dri2" will be loaded. This was enabled by default and also specified in the config file.
    [ 358.904] (II) LoadModule: "extmod"
    [ 358.904] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
    [ 358.904] (II) Module extmod: vendor="X.Org Foundation"
    [ 358.904] compiled for 1.9.2, module version = 1.0.0
    [ 358.904] Module class: X.Org Server Extension
    [ 358.904] ABI class: X.Org Server Extension, version 4.0
    [ 358.904] (II) Loading extension MIT-SCREEN-SAVER
    [ 358.904] (II) Loading extension XFree86-VidModeExtension
    [ 358.904] (II) Loading extension XFree86-DGA
    [ 358.904] (II) Loading extension DPMS
    [ 358.904] (II) Loading extension XVideo
    [ 358.904] (II) Loading extension XVideo-MotionCompensation
    [ 358.904] (II) Loading extension X-Resource
    [ 358.904] (II) LoadModule: "glx"
    [ 358.904] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
    [ 358.905] (II) Module glx: vendor="X.Org Foundation"
    [ 358.905] compiled for 1.9.2, module version = 1.0.0
    [ 358.905] ABI class: X.Org Server Extension, version 4.0
    [ 358.905] (==) AIGLX enabled
    [ 358.905] (II) Loading extension GLX
    [ 358.905] (II) LoadModule: "record"
    [ 358.905] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
    [ 358.905] (II) Module record: vendor="X.Org Foundation"
    [ 358.905] compiled for 1.9.2, module version = 1.13.0
    [ 358.905] Module class: X.Org Server Extension
    [ 358.905] ABI class: X.Org Server Extension, version 4.0
    [ 358.905] (II) Loading extension RECORD
    [ 358.905] (II) LoadModule: "dri2"
    [ 358.905] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
    [ 358.905] (II) Module dri2: vendor="X.Org Foundation"
    [ 358.905] compiled for 1.9.2, module version = 1.2.0
    [ 358.905] ABI class: X.Org Server Extension, version 4.0
    [ 358.905] (II) Loading extension DRI2
    [ 358.905] (II) LoadModule: "dbe"
    [ 358.905] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
    [ 358.906] (II) Module dbe: vendor="X.Org Foundation"
    [ 358.906] compiled for 1.9.2, module version = 1.0.0
    [ 358.906] Module class: X.Org Server Extension
    [ 358.906] ABI class: X.Org Server Extension, version 4.0
    [ 358.906] (II) Loading extension DOUBLE-BUFFER
    [ 358.906] (II) LoadModule: "dri"
    [ 358.906] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
    [ 358.906] (II) Module dri: vendor="X.Org Foundation"
    [ 358.906] compiled for 1.9.2, module version = 1.0.0
    [ 358.906] ABI class: X.Org Server Extension, version 4.0
    [ 358.906] (II) Loading extension XFree86-DRI
    [ 358.906] (II) LoadModule: "synaptics"
    [ 358.906] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
    [ 358.906] (II) Module synaptics: vendor="X.Org Foundation"
    [ 358.906] compiled for 1.9.0, module version = 1.3.0
    [ 358.906] Module class: X.Org XInput Driver
    [ 358.906] ABI class: X.Org XInput driver, version 11.0
    [ 358.906] (II) LoadModule: "intel"
    [ 358.906] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
    [ 358.907] (II) Module intel: vendor="X.Org Foundation"
    [ 358.907] compiled for 1.9.0, module version = 2.12.0
    [ 358.907] Module class: X.Org Video Driver
    [ 358.907] ABI class: X.Org Video Driver, version 8.0
    [ 358.907] (II) LoadModule: "mouse"
    [ 358.907] (II) Loading /usr/lib/xorg/modules/input/mouse_drv.so
    [ 358.907] (II) Module mouse: vendor="X.Org Foundation"
    [ 358.907] compiled for 1.9.0, module version = 1.6.0
    [ 358.907] Module class: X.Org XInput Driver
    [ 358.907] ABI class: X.Org XInput driver, version 11.0
    [ 358.907] (II) LoadModule: "synaptics"
    [ 358.907] (II) Reloading /usr/lib/xorg/modules/input/synaptics_drv.so
    [ 358.907] (II) LoadModule: "kbd"
    [ 358.908] (II) Loading /usr/lib/xorg/modules/input/kbd_drv.so
    [ 358.908] (II) Module kbd: vendor="X.Org Foundation"
    [ 358.908] compiled for 1.9.0, module version = 1.4.0
    [ 358.908] Module class: X.Org XInput Driver
    [ 358.908] ABI class: X.Org XInput driver, version 11.0
    [ 358.908] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
    i810-dc100, i810e, i815, i830M, 845G, 852GM/855GM, 865G, 915G,
    E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
    965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
    4 Series, G45/G43, Q45/Q43, G41, B43, Clarkdale, Arrandale
    [ 358.908] (--) using VT number 7
    [ 358.908] (WW) xf86OpenConsole: setpgid failed: Operation not permitted
    [ 358.908] (WW) xf86OpenConsole: setsid failed: Operation not permitted
    [ 358.916] drmOpenDevice: node name is /dev/dri/card0
    [ 358.916] drmOpenDevice: open result is 10, (OK)
    [ 358.916] drmOpenByBusid: Searching for BusID pci:0000:00:02.0
    [ 358.916] drmOpenDevice: node name is /dev/dri/card0
    [ 358.916] drmOpenDevice: open result is 10, (OK)
    [ 358.916] drmOpenByBusid: drmOpenMinor returns 10
    [ 358.916] drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
    [ 358.916] (==) intel(0): Depth 24, (--) framebuffer bpp 32
    [ 358.916] (==) intel(0): RGB weight 888
    [ 358.916] (==) intel(0): Default visual is TrueColor
    [ 358.916] (II) intel(0): Integrated Graphics Chipset: Intel(R) 945GM
    [ 358.916] (--) intel(0): Chipset: "945GM"
    [ 358.916] (==) intel(0): video overlay key set to 0x101fe
    [ 358.953] (II) intel(0): Output VGA1 using monitor section vgamonitor
    [ 358.953] (**) intel(0): Option "Disable" "true"
    [ 359.059] (II) intel(0): Output LVDS1 using monitor section lvdsmonitor
    [ 359.059] (II) intel(0): found backlight control interface /sys/class/backlight/acpi_video0
    [ 359.340] (II) intel(0): Output TV1 has no monitor section
    [ 359.380] (II) intel(0): EDID for output VGA1
    [ 359.486] (II) intel(0): EDID for output LVDS1
    [ 359.486] (II) intel(0): Manufacturer: CPT Model: 13a6 Serial#: 0
    [ 359.486] (II) intel(0): Year: 2006 Week: 17
    [ 359.486] (II) intel(0): EDID Version: 1.3
    [ 359.486] (II) intel(0): Digital Display Input
    [ 359.486] (II) intel(0): Max Image Size [cm]: horiz.: 33 vert.: 21
    [ 359.486] (II) intel(0): Gamma: 2.20
    [ 359.486] (II) intel(0): No DPMS capabilities specified
    [ 359.486] (II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
    [ 359.486] (II) intel(0): First detailed timing is preferred mode
    [ 359.486] (II) intel(0): redX: 0.600 redY: 0.340 greenX: 0.309 greenY: 0.559
    [ 359.486] (II) intel(0): blueX: 0.149 blueY: 0.131 whiteX: 0.315 whiteY: 0.329
    [ 359.486] (II) intel(0): Manufacturer's mask: 0
    [ 359.486] (II) intel(0): Supported detailed timing:
    [ 359.486] (II) intel(0): clock: 68.9 MHz Image Size: 331 x 207 mm
    [ 359.486] (II) intel(0): h_active: 1280 h_sync: 1301 h_sync_end 1333 h_blank_end 1408 h_border: 0
    [ 359.486] (II) intel(0): v_active: 800 v_sync: 801 v_sync_end 804 v_blanking: 816 v_border: 0
    [ 359.486] (II) intel(0): Unknown vendor-specific block f
    [ 359.486] (II) intel(0): FD1631154WB4
    [ 359.486] (II) intel(0): /BRZÄêÿ
    [ 359.486] (II) intel(0): EDID (in hex):
    [ 359.486] (II) intel(0): 00ffffffffffff000e14a61300000000
    [ 359.486] (II) intel(0): 11100103802115780a806d99574f8f26
    [ 359.486] (II) intel(0): 21505400000001010101010101010101
    [ 359.486] (II) intel(0): 010101010101ea1a0080502010301520
    [ 359.486] (II) intel(0): 13004bcf100000190000000f00000000
    [ 359.486] (II) intel(0): 0000000000206e050f00000000fe0046
    [ 359.486] (II) intel(0): 44313633313135345742340a000000fe
    [ 359.486] (II) intel(0): 002f42525a81c4eaff01010a2020004f
    [ 359.487] (II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
    [ 359.487] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
    [ 359.487] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
    [ 359.487] (II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
    [ 359.487] (II) intel(0): Not using default mode "640x480" (doublescan mode not supported)
    [ 359.487] (II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
    [ 359.487] (II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
    [ 359.487] (II) intel(0): Not using default mode "896x672" (doublescan mode not supported)
    [ 359.487] (II) intel(0): Not using default mode "928x696" (doublescan mode not supported)
    [ 359.487] (II) intel(0): Not using default mode "960x720" (doublescan mode not supported)
    [ 359.487] (II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
    [ 359.487] (II) intel(0): Not using default mode "1024x768" (doublescan mode not supported)
    [ 359.487] (II) intel(0): Printing probed modes for output LVDS1
    [ 359.487] (II) intel(0): Modeline "1280x800"x60.0 68.90 1280 1301 1333 1408 800 801 804 816 -hsync -vsync (48.9 kHz)
    [ 359.487] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
    [ 359.487] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
    [ 359.487] (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
    [ 359.487] (II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
    [ 359.766] (II) intel(0): EDID for output TV1
    [ 359.766] (II) intel(0): Output VGA1 disabled by config file
    [ 359.766] (II) intel(0): Output LVDS1 connected
    [ 359.766] (II) intel(0): Output TV1 disconnected
    [ 359.766] (II) intel(0): Using exact sizes for initial modes
    [ 359.766] (II) intel(0): Output LVDS1 using initial mode 1280x800
    [ 359.766] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
    [ 359.766] (II) intel(0): Pageflipping enabled in kernel, but disabled in X
    [ 359.766] (II) intel(0): Don't panic: https://bugzilla.redhat.com/588421
    [ 359.766] (==) intel(0): DPI set to (96, 96)
    [ 359.767] (II) Loading sub module "fb"
    [ 359.767] (II) LoadModule: "fb"
    [ 359.767] (II) Loading /usr/lib/xorg/modules/libfb.so
    [ 359.767] (II) Module fb: vendor="X.Org Foundation"
    [ 359.767] compiled for 1.9.2, module version = 1.0.0
    [ 359.767] ABI class: X.Org ANSI C Emulation, version 0.4
    [ 359.767] (==) Depth 24 pixmap format is 32 bpp
    [ 359.767] (II) intel(0): [DRI2] Setup complete
    [ 359.767] (II) intel(0): [DRI2] DRI driver: i915
    [ 359.767] (**) intel(0): Tiling enabled
    [ 359.767] (**) intel(0): SwapBuffers wait enabled
    [ 359.767] (==) intel(0): VideoRam: 262144 KB
    [ 359.767] (II) intel(0): Allocated new frame buffer 1280x800 stride 8192, tiled
    [ 359.767] (II) UXA(0): Driver registered support for the following operations:
    [ 359.767] (II) solid
    [ 359.767] (II) copy
    [ 359.767] (II) composite (RENDER acceleration)
    [ 359.767] (II) put_image
    [ 359.767] (II) get_image
    [ 359.767] (==) intel(0): Backing store disabled
    [ 359.767] (==) intel(0): Silken mouse enabled
    [ 359.767] (II) intel(0): Initializing HW Cursor
    [ 359.803] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
    [ 359.804] (==) intel(0): DPMS enabled
    [ 359.805] (==) intel(0): Intel XvMC decoder disabled
    [ 359.805] (II) intel(0): Set up textured video
    [ 359.805] (II) intel(0): Set up overlay video
    [ 359.805] (II) intel(0): direct rendering: DRI2 Enabled
    [ 359.805] (--) RandR disabled
    [ 359.805] (II) Initializing built-in extension Generic Event Extension
    [ 359.805] (II) Initializing built-in extension SHAPE
    [ 359.805] (II) Initializing built-in extension MIT-SHM
    [ 359.805] (II) Initializing built-in extension XInputExtension
    [ 359.805] (II) Initializing built-in extension XTEST
    [ 359.805] (II) Initializing built-in extension BIG-REQUESTS
    [ 359.805] (II) Initializing built-in extension SYNC
    [ 359.805] (II) Initializing built-in extension XKEYBOARD
    [ 359.805] (II) Initializing built-in extension XC-MISC
    [ 359.805] (II) Initializing built-in extension SECURITY
    [ 359.805] (II) Initializing built-in extension XINERAMA
    [ 359.805] (II) Initializing built-in extension XFIXES
    [ 359.805] (II) Initializing built-in extension RENDER
    [ 359.805] (II) Initializing built-in extension RANDR
    [ 359.805] (II) Initializing built-in extension COMPOSITE
    [ 359.805] (II) Initializing built-in extension DAMAGE
    [ 359.821] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
    [ 359.821] (II) AIGLX: enabled GLX_INTEL_swap_event
    [ 359.821] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
    [ 359.821] (II) AIGLX: enabled GLX_SGI_make_current_read
    [ 359.821] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
    [ 359.821] (II) AIGLX: Loaded and initialized /usr/lib/xorg/modules/dri/i915_dri.so
    [ 359.821] (II) GLX: Initialized DRI2 GL provider for screen 0
    [ 359.822] (II) intel(0): Setting screen physical size to 338 x 211
    [ 360.019] (**) Option "Protocol" "auto"
    [ 360.019] (**) Option "Device" "/dev/input/mice"
    [ 360.019] (II) Mouse0: Setting mouse protocol to "ExplorerPS/2"
    [ 360.019] (**) Mouse0: Device: "/dev/input/mice"
    [ 360.019] (**) Mouse0: Protocol: "auto"
    [ 360.019] (**) Option "CorePointer"
    [ 360.019] (**) Mouse0: always reports core events
    [ 360.019] (**) Option "Device" "/dev/input/mice"
    [ 360.019] (==) Mouse0: Emulate3Buttons, Emulate3Timeout: 50
    [ 360.019] (**) Option "ZAxisMapping" "4 5 6 7"
    [ 360.019] (**) Mouse0: ZAxisMapping: buttons 4, 5, 6 and 7
    [ 360.019] (**) Mouse0: Buttons: 11
    [ 360.019] (**) Option "Sensitivity" "0.7"
    [ 360.019] (**) Mouse0: Sensitivity: 0.7
    [ 360.019] (II) XINPUT: Adding extended input device "Mouse0" (type: MOUSE)
    [ 360.019] (**) Mouse0: (accel) keeping acceleration scheme 1
    [ 360.019] (**) Mouse0: (accel) acceleration profile 0
    [ 360.019] (**) Mouse0: (accel) acceleration factor: 2.000
    [ 360.019] (**) Mouse0: (accel) acceleration threshold: 4
    [ 360.019] (II) Mouse0: Setting mouse protocol to "ExplorerPS/2"
    [ 360.311] (II) Mouse0: ps2EnableDataReporting: succeeded
    [ 360.311] (II) Synaptics touchpad driver version 1.3.0
    [ 360.312] (--) touchpad auto-dev sets device to /dev/input/event6
    [ 360.312] (**) Option "Device" "/dev/input/event6"
    [ 360.312] (--) touchpad: x-axis range 1472 - 5472
    [ 360.312] (--) touchpad: y-axis range 1408 - 4448
    [ 360.312] (--) touchpad: pressure range 0 - 255
    [ 360.312] (--) touchpad: finger width range 0 - 0
    [ 360.312] (--) touchpad: buttons: left right double triple
    [ 360.312] (--) touchpad: invalid finger width range. defaulting to 0 - 16
    [ 360.312] (**) Option "TapButton1" "1"
    [ 360.312] (--) touchpad: touchpad found
    [ 360.312] (**) Option "SendCoreEvents"
    [ 360.312] (**) touchpad: always reports core events
    [ 360.312] (II) XINPUT: Adding extended input device "touchpad" (type: TOUCHPAD)
    [ 360.312] (**) touchpad: (accel) MinSpeed is now constant deceleration 2.5
    [ 360.312] (**) touchpad: MaxSpeed is now 1.75
    [ 360.312] (**) touchpad: AccelFactor is now 0.040
    [ 360.312] (**) touchpad: (accel) keeping acceleration scheme 1
    [ 360.312] (**) touchpad: (accel) acceleration profile 1
    [ 360.312] (**) touchpad: (accel) acceleration factor: 2.000
    [ 360.312] (**) touchpad: (accel) acceleration threshold: 4
    [ 360.312] (--) touchpad: touchpad found
    [ 360.312] (**) Option "CoreKeyboard"
    [ 360.312] (**) Keyboard0: always reports core events
    [ 360.312] (**) Option "Protocol" "standard"
    [ 360.312] (**) Keyboard0: Protocol: standard
    [ 360.312] (**) Option "XkbRules" "base"
    [ 360.312] (**) Keyboard0: XkbRules: "base"
    [ 360.312] (**) Option "XkbModel" "pc105"
    [ 360.312] (**) Keyboard0: XkbModel: "pc105"
    [ 360.312] (**) Option "XkbLayout" "fr"
    [ 360.313] (**) Keyboard0: XkbLayout: "fr"
    [ 360.313] (**) Option "XkbVariant" "oss"
    [ 360.313] (**) Keyboard0: XkbVariant: "oss"
    [ 360.313] (**) Option "XkbOptions" "terminate:ctrl_alt_bksp"
    [ 360.313] (**) Keyboard0: XkbOptions: "terminate:ctrl_alt_bksp"
    [ 360.313] (**) Option "CustomKeycodes" "off"
    [ 360.313] (**) Keyboard0: CustomKeycodes disabled
    [ 360.313] (II) XINPUT: Adding extended input device "Keyboard0" (type: KEYBOARD)
    [ 360.372] (II) config/udev: Adding input device Power Button (/dev/input/event4)
    [ 360.372] (II) AutoAddDevices is off - not adding device.
    [ 360.373] (II) config/udev: Adding input device Video Bus (/dev/input/event5)
    [ 360.373] (II) AutoAddDevices is off - not adding device.
    [ 360.376] (II) config/udev: Adding input device Power Button (/dev/input/event2)
    [ 360.376] (II) AutoAddDevices is off - not adding device.
    [ 360.376] (II) config/udev: Adding input device Lid Switch (/dev/input/event1)
    [ 360.376] (II) AutoAddDevices is off - not adding device.
    [ 360.376] (II) config/udev: Adding input device Sleep Button (/dev/input/event3)
    [ 360.376] (II) AutoAddDevices is off - not adding device.
    [ 360.377] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event7)
    [ 360.377] (II) AutoAddDevices is off - not adding device.
    [ 360.379] (II) config/udev: Adding input device MLK Trust Wireless Mouse (/dev/input/event9)
    [ 360.379] (II) AutoAddDevices is off - not adding device.
    [ 360.380] (II) config/udev: Adding input device MLK Trust Wireless Mouse (/dev/input/mouse1)
    [ 360.380] (II) AutoAddDevices is off - not adding device.
    [ 360.382] (II) config/udev: Adding input device Western Digital External HDD (/dev/input/event8)
    [ 360.382] (II) AutoAddDevices is off - not adding device.
    [ 360.385] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
    [ 360.385] (II) AutoAddDevices is off - not adding device.
    [ 360.385] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event6)
    [ 360.385] (II) AutoAddDevices is off - not adding device.
    [ 360.385] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse0)
    [ 360.385] (II) AutoAddDevices is off - not adding device.
    [ 362.484] (II) AIGLX: Suspending AIGLX clients for VT switch
    [ 368.334] (II) Open ACPI successful (/var/run/acpid.socket)
    [ 368.334] (II) AIGLX: Resuming AIGLX clients after VT switch
    [ 368.503] (II) intel(0): EDID vendor "CPT", prod id 5030
    [ 368.503] (II) intel(0): Printing DDC gathered Modelines:
    [ 368.503] (II) intel(0): Modeline "1280x800"x0.0 68.90 1280 1301 1333 1408 800 801 804 816 -hsync -vsync (48.9 kHz)
    [ 369.076] (II) Mouse0: ps2EnableDataReporting: succeeded
    [ 369.076] (--) touchpad: touchpad found
    [ 441.972] (II) 3rd Button detected: disabling emulate3Button
    output of glxinfo
    name of display: :0.0
    display: :0 screen: 0
    direct rendering: Yes
    server glx vendor string: SGI
    server glx version string: 1.4
    server glx extensions:
    GLX_ARB_multisample, GLX_EXT_import_context, GLX_EXT_texture_from_pixmap,
    GLX_EXT_visual_info, GLX_EXT_visual_rating, GLX_MESA_copy_sub_buffer,
    GLX_OML_swap_method, GLX_SGI_make_current_read, GLX_SGI_swap_control,
    GLX_SGIS_multisample, GLX_SGIX_fbconfig, GLX_SGIX_pbuffer,
    GLX_SGIX_visual_select_group, GLX_INTEL_swap_event
    client glx vendor string: Mesa Project and SGI
    client glx version string: 1.4
    client glx extensions:
    GLX_ARB_get_proc_address, GLX_ARB_multisample, GLX_EXT_import_context,
    GLX_EXT_visual_info, GLX_EXT_visual_rating, GLX_MESA_allocate_memory,
    GLX_MESA_copy_sub_buffer, GLX_MESA_swap_control,
    GLX_MESA_swap_frame_usage, GLX_OML_swap_method, GLX_OML_sync_control,
    GLX_SGI_make_current_read, GLX_SGI_swap_control, GLX_SGI_video_sync,
    GLX_SGIS_multisample, GLX_SGIX_fbconfig, GLX_SGIX_pbuffer,
    GLX_SGIX_visual_select_group, GLX_EXT_texture_from_pixmap,
    GLX_INTEL_swap_event
    GLX version: 1.4
    GLX extensions:
    GLX_ARB_get_proc_address, GLX_ARB_multisample, GLX_EXT_import_context,
    GLX_EXT_visual_info, GLX_EXT_visual_rating, GLX_MESA_copy_sub_buffer,
    GLX_MESA_swap_control, GLX_OML_swap_method, GLX_OML_sync_control,
    GLX_SGI_make_current_read, GLX_SGI_swap_control, GLX_SGI_video_sync,
    GLX_SGIS_multisample, GLX_SGIX_fbconfig, GLX_SGIX_pbuffer,
    GLX_SGIX_visual_select_group, GLX_EXT_texture_from_pixmap,
    GLX_INTEL_swap_event
    OpenGL vendor string: Tungsten Graphics, Inc
    OpenGL renderer string: Mesa DRI Intel(R) 945GM GEM 20100328 2010Q1 x86/MMX/SSE2
    OpenGL version string: 1.4 Mesa 7.8.3
    OpenGL extensions:
    GL_ARB_copy_buffer, GL_ARB_depth_texture, GL_ARB_draw_buffers,
    GL_ARB_draw_elements_base_vertex, GL_ARB_fragment_program,
    GL_ARB_half_float_pixel, GL_ARB_map_buffer_range, GL_ARB_multisample,
    GL_ARB_multitexture, GL_ARB_pixel_buffer_object, GL_ARB_point_parameters,
    GL_ARB_point_sprite, GL_ARB_provoking_vertex, GL_ARB_shader_objects,
    GL_ARB_shading_language_100, GL_ARB_shading_language_120, GL_ARB_shadow,
    GL_ARB_sync, GL_ARB_texture_border_clamp, GL_ARB_texture_compression,
    GL_ARB_texture_cube_map, GL_ARB_texture_env_add,
    GL_ARB_texture_env_combine, GL_ARB_texture_env_crossbar,
    GL_ARB_texture_env_dot3, GL_ARB_texture_mirrored_repeat,
    GL_ARB_texture_non_power_of_two, GL_ARB_texture_rectangle,
    GL_ARB_transpose_matrix, GL_ARB_vertex_array_object,
    GL_ARB_vertex_buffer_object, GL_ARB_vertex_program, GL_ARB_vertex_shader,
    GL_ARB_window_pos, GL_EXT_abgr, GL_EXT_bgra, GL_EXT_blend_color,
    GL_EXT_blend_equation_separate, GL_EXT_blend_func_separate,
    GL_EXT_blend_logic_op, GL_EXT_blend_minmax, GL_EXT_blend_subtract,
    GL_EXT_cull_vertex, GL_EXT_compiled_vertex_array, GL_EXT_copy_texture,
    GL_EXT_draw_range_elements, GL_EXT_framebuffer_blit,
    GL_EXT_framebuffer_object, GL_EXT_fog_coord,
    GL_EXT_gpu_program_parameters, GL_EXT_multi_draw_arrays,
    GL_EXT_packed_depth_stencil, GL_EXT_packed_pixels,
    GL_EXT_pixel_buffer_object, GL_EXT_point_parameters,
    GL_EXT_polygon_offset, GL_EXT_provoking_vertex, GL_EXT_rescale_normal,
    GL_EXT_secondary_color, GL_EXT_separate_specular_color,
    GL_EXT_shadow_funcs, GL_EXT_stencil_two_side, GL_EXT_stencil_wrap,
    GL_EXT_subtexture, GL_EXT_texture, GL_EXT_texture3D,
    GL_EXT_texture_cube_map, GL_EXT_texture_edge_clamp,
    GL_EXT_texture_env_add, GL_EXT_texture_env_combine,
    GL_EXT_texture_env_dot3, GL_EXT_texture_filter_anisotropic,
    GL_EXT_texture_lod_bias, GL_EXT_texture_object, GL_EXT_texture_rectangle,
    GL_EXT_vertex_array, GL_3DFX_texture_compression_FXT1,
    GL_APPLE_client_storage, GL_APPLE_packed_pixels,
    GL_APPLE_vertex_array_object, GL_APPLE_object_purgeable,
    GL_ATI_blend_equation_separate, GL_ATI_texture_env_combine3,
    GL_ATI_separate_stencil, GL_IBM_multimode_draw_arrays,
    GL_IBM_rasterpos_clip, GL_IBM_texture_mirrored_repeat,
    GL_INGR_blend_func_separate, GL_MESA_pack_invert, GL_MESA_ycbcr_texture,
    GL_MESA_window_pos, GL_NV_blend_square, GL_NV_light_max_exponent,
    GL_NV_packed_depth_stencil, GL_NV_texture_env_combine4,
    GL_NV_texture_rectangle, GL_NV_texgen_reflection, GL_NV_vertex_program,
    GL_NV_vertex_program1_1, GL_OES_read_format, GL_SGIS_generate_mipmap,
    GL_SGIS_texture_border_clamp, GL_SGIS_texture_edge_clamp,
    GL_SGIS_texture_lod, GL_SUN_multi_draw_arrays
    32 GLX Visuals
    visual x bf lv rg d st colorbuffer ax dp st accumbuffer ms cav
    id dep cl sp sz l ci b ro r g b a bf th cl r g b a ns b eat
    0x21 24 tc 0 32 0 r y . 8 8 8 8 0 24 8 0 0 0 0 0 0 None
    0x22 24 dc 0 32 0 r y . 8 8 8 8 0 24 8 0 0 0 0 0 0 None
    0x8e 24 tc 0 24 0 r . . 8 8 8 0 0 0 0 0 0 0 0 0 0 None
    0x8f 24 tc 0 24 0 r y . 8 8 8 0 0 0 0 0 0 0 0 0 0 None
    0x90 24 tc 0 24 0 r y . 8 8 8 0 0 0 0 0 0 0 0 0 0 None
    0x91 24 tc 0 24 0 r . . 8 8 8 0 0 24 8 0 0 0 0 0 0 None
    0x92 24 tc 0 24 0 r y . 8 8 8 0 0 24 8 0 0 0 0 0 0 None
    0x93 24 tc 0 24 0 r y . 8 8 8 0 0 24 8 0 0 0 0 0 0 None
    0x94 24 tc 0 32 0 r . . 8 8 8 8 0 0 0 0 0 0 0 0 0 None
    0x95 24 tc 0 32 0 r y . 8 8 8 8 0 0 0 0 0 0 0 0 0 None
    0x96 24 tc 0 32 0 r y . 8 8 8 8 0 0 0 0 0 0 0 0 0 None
    0x97 24 tc 0 32 0 r . . 8 8 8 8 0 24 8 0 0 0 0 0 0 None
    0x98 24 tc 0 24 0 r y . 8 8 8 0 0 24 8 0 0 0 0 0 0 None
    0x99 24 tc 0 24 0 r y . 8 8 8 0 0 24 8 16 16 16 0 0 0 Slow
    0x9a 24 tc 0 32 0 r y . 8 8 8 8 0 24 8 0 0 0 0 0 0 None
    0x9b 24 tc 0 32 0 r y . 8 8 8 8 0 24 8 16 16 16 16 0 0 Slow
    0x9c 24 dc 0 24 0 r . . 8 8 8 0 0 0 0 0 0 0 0 0 0 None
    0x9d 24 dc 0 24 0 r y . 8 8 8 0 0 0 0 0 0 0 0 0 0 None
    0x9e 24 dc 0 24 0 r y . 8 8 8 0 0 0 0 0 0 0 0 0 0 None
    0x9f 24 dc 0 24 0 r . . 8 8 8 0 0 24 8 0 0 0 0 0 0 None
    0xa0 24 dc 0 24 0 r y . 8 8 8 0 0 24 8 0 0 0 0 0 0 None
    0xa1 24 dc 0 24 0 r y . 8 8 8 0 0 24 8 0 0 0 0 0 0 None
    0xa2 24 dc 0 32 0 r . . 8 8 8 8 0 0 0 0 0 0 0 0 0 None
    0xa3 24 dc 0 32 0 r y . 8 8 8 8 0 0 0 0 0 0 0 0 0 None
    0xa4 24 dc 0 32 0 r y . 8 8 8 8 0 0 0 0 0 0 0 0 0 None
    0xa5 24 dc 0 32 0 r . . 8 8 8 8 0 24 8 0 0 0 0 0 0 None
    0xa6 24 dc 0 32 0 r y . 8 8 8 8 0 24 8 0 0 0 0 0 0 None
    0xa7 24 dc 0 24 0 r y . 8 8 8 0 0 24 8 0 0 0 0 0 0 None
    0xa8 24 dc 0 24 0 r y . 8 8 8 0 0 24 8 16 16 16 0 0 0 Slow
    0xa9 24 dc 0 32 0 r y . 8 8 8 8 0 24 8 0 0 0 0 0 0 None
    0xaa 24 dc 0 32 0 r y . 8 8 8 8 0 24 8 16 16 16 16 0 0 Slow
    0x5d 32 tc 0 32 0 r y . 8 8 8 8 0 24 8 0 0 0 0 0 0 None
    48 GLXFBConfigs:
    visual x bf lv rg d st colorbuffer ax dp st accumbuffer ms cav
    id dep cl sp sz l ci b ro r g b a bf th cl r g b a ns b eat
    0x5e 0 tc 0 16 0 r . . 5 6 5 0 0 0 0 0 0 0 0 0 0 None
    0x5f 0 tc 0 16 0 r y . 5 6 5 0 0 0 0 0 0 0 0 0 0 None
    0x60 0 tc 0 16 0 r y . 5 6 5 0 0 0 0 0 0 0 0 0 0 None
    0x61 0 tc 0 16 0 r . . 5 6 5 0 0 16 0 0 0 0 0 0 0 None
    0x62 0 tc 0 16 0 r y . 5 6 5 0 0 16 0 0 0 0 0 0 0 None
    0x63 0 tc 0 16 0 r y . 5 6 5 0 0 16 0 0 0 0 0 0 0 None
    0x64 0 tc 0 24 0 r . . 8 8 8 0 0 0 0 0 0 0 0 0 0 None
    0x65 0 tc 0 24 0 r y . 8 8 8 0 0 0 0 0 0 0 0 0 0 None
    0x66 0 tc 0 24 0 r y . 8 8 8 0 0 0 0 0 0 0 0 0 0 None
    0x67 0 tc 0 24 0 r . . 8 8 8 0 0 24 8 0 0 0 0 0 0 None
    0x68 0 tc 0 24 0 r y . 8 8 8 0 0 24 8 0 0 0 0 0 0 None
    0x69 0 tc 0 24 0 r y . 8 8 8 0 0 24 8 0 0 0 0 0 0 None
    0x6a 0 tc 0 32 0 r . . 8 8 8 8 0 0 0 0 0 0 0 0 0 None
    0x6b 0 tc 0 32 0 r y . 8 8 8 8 0 0 0 0 0 0 0 0 0 None
    0x6c 0 tc 0 32 0 r y . 8 8 8 8 0 0 0 0 0 0 0 0 0 None
    0x6d 0 tc 0 32 0 r . . 8 8 8 8 0 24 8 0 0 0 0 0 0 None
    0x6e 0 tc 0 32 0 r y . 8 8 8 8 0 24 8 0 0 0 0 0 0 None
    0x6f 0 tc 0 32 0 r y . 8 8 8 8 0 24 8 0 0 0 0 0 0 None
    0x70 0 tc 0 16 0 r y . 5 6 5 0 0 16 0 0 0 0 0 0 0 None
    0x71 0 tc 0 16 0 r y . 5 6 5 0 0 16 0 16 16 16 0 0 0 Slow
    0x72 0 tc 0 24 0 r y . 8 8 8 0 0 24 8 0 0 0 0 0 0 None
    0x73 0 tc 0 24 0 r y . 8 8 8 0 0 24 8 16 16 16 0 0 0 Slow
    0x74 0 tc 0 32 0 r y . 8 8 8 8 0 24 8 0 0 0 0 0 0 None
    0x75 0 tc 0 32 0 r y . 8 8 8 8 0 24 8 16 16 16 16 0 0 Slow
    0x76 0 dc 0 16 0 r . . 5 6 5 0 0 0 0 0 0 0 0 0 0 None
    0x77 0 dc 0 16 0 r y . 5 6 5 0 0 0 0 0 0 0 0 0 0 None
    0x78 0 dc 0 16 0 r y . 5 6 5 0 0 0 0 0 0 0 0 0 0 None
    0x79 0 dc 0 16 0 r . . 5 6 5 0 0 16 0 0 0 0 0 0 0 None
    0x7a 0 dc 0 16 0 r y . 5 6 5 0 0 16 0 0 0 0 0 0 0 None
    0x7b 0 dc 0 16 0 r y . 5 6 5 0 0 16 0 0 0 0 0 0 0 None
    0x7c 0 dc 0 24 0 r . . 8 8 8 0 0 0 0 0 0 0 0 0 0 None
    0x7d 0 dc 0 24 0 r y . 8 8 8 0 0 0 0 0 0 0 0 0 0 None
    0x7e 0 dc 0 24 0 r y . 8 8 8 0 0 0 0 0 0 0 0 0 0 None
    0x7f 0 dc 0 24 0 r . . 8 8 8 0 0 24 8 0 0 0 0 0 0 None
    0x80 0 dc 0 24 0 r y . 8 8 8 0 0 24 8 0 0 0 0 0 0 None
    0x81 0 dc 0 24 0 r y . 8 8 8 0 0 24 8 0 0 0 0 0 0 None
    0x82 0 dc 0 32 0 r . . 8 8 8 8 0 0 0 0 0 0 0 0 0 None
    0x83 0 dc 0 32 0 r y . 8 8 8 8 0 0 0 0 0 0 0 0 0 None
    0x84 0 dc 0 32 0 r y . 8 8 8 8 0 0 0 0 0 0 0 0 0 None
    0x85 0 dc 0 32 0 r . . 8 8 8 8 0 24 8 0 0 0 0 0 0 None
    0x86 0 dc 0 32 0 r y . 8 8 8 8 0 24 8 0 0 0 0 0 0 None
    0x87 0 dc 0 32 0 r y . 8 8 8 8 0 24 8 0 0 0 0 0 0 None
    0x88 0 dc 0 16 0 r y . 5 6 5 0 0 16 0 0 0 0 0 0 0 None
    0x89 0 dc 0 16 0 r y . 5 6 5 0 0 16 0 16 16 16 0 0 0 Slow
    0x8a 0 dc 0 24 0 r y . 8 8 8 0 0 24 8 0 0 0 0 0 0 None
    0x8b 0 dc 0 24 0 r y . 8 8 8 0 0 24 8 16 16 16 0 0 0 Slow
    0x8c 0 dc 0 32 0 r y . 8 8 8 8 0 24 8 0 0 0 0 0 0 None
    0x8d 0 dc 0 32 0 r y . 8 8 8 8 0 24 8 16 16 16 16 0 0 Slow

    Gusar wrote:
    *sigh*
    Do you have problems with anything that's *not* glxgears?
    I have indeed not seen other problems. Presently the only other software that I believe use openGL that I use is googleearth; which run fine. Could it be a problem with glxgears?

  • 10.6.8 Upgrade Problems with Google Display Error post install

    Hi -- I just upgraded my IMac to 10.6.8 in anctipation of migrating to Mountain Lion later this week.   While the installation went very smoothly, it seems I am having a problem with the Google display.    When I open Google, the search box has no lines around it and when I enter the box, it jumps to the Google search in the menu bar, and I can't read what I'm typing.
    I've tried a multitude of other sites where there are search boxes, log in boxes, etc, but I am only having problems with Google.   Any thoughts?
    Model:                         IMac 9,1
    Processor Speed:         3.06 GHz
    # Processors:               1
    Total # of Cores:           2
    L2 Cache:                    6 MB
    Memory:                         4 GB
    Bus Speed:                    1.07 GHz
    Thanks
    Bill

    boy these forums really help you out.  having similar issue and no one seems to have a clue why 10.6.8 screws everything up.  I did notice the active directory plugin version changed from 6.5 to 6.5.1.  They did something.

  • The Problems With Logic (as I see them) - PART TWO!

    Hello again,
    It seems to be a tradition now that as I compose on a track, I keep a text editor open so that I can jot down all the annoyances and problems that I encounter during my creative process... Anyone who missed the previous edition of this topic, please visit PART ONE, here:
    http://discussions.apple.com/message.jspa?messageID=3605456#3605456
    That said, here I give you "The Problems With Logic Part II":
    1. Logic should clear the playback buffer everytime you play. Quite often you start playing and there is trailing reverb/note events from various audio instruments and plug-ins.
    2. The sample edtor "save selection as" has no memory of where you previously were in the file browser.
    3. If you double click on a wave form, the sample editor opens up with the wave form you double clicked on... Great.. But now, if you go and double click on another wave form somewhere, it just takes you back to the sample editor with the same previous wave form selected (not great). This is incredibly annoying if you are attempting to save out certain edits-- Quite often you will end up saving 5 or 6 of the same exact waveform, thinking you were saving each individual one. GRR!
    4. Key commands.. if you try to assign a key command to something that is already used by another feature, you are presented with a window warning you that it already exists.. If you click cancel, then you can no longer enter any keys in the key field.. You are forced to close the key commands preferences window and start over.
    5. Key command window: You should be able to search by command.. For example, if I want to find out what "o" is assigned to, I should be able to search by O-- Further, you should be able to sort the key commands by clicking the column titles "key", "command" -- or "midi"... After all, we can sort by name, date, size, etc in the finder by clicking on these column titles.
    6. Tempo Tap feature-- I am quite confused by this. There should be a simple way to tap and define a tempo. When ever i try to do this, the tempo is only temporarily changed until I stop playing, and most of the time I get error alerts about trying to sync audio and midi (mind you, when there are absolutely no parts in the entire arrange window). The manual states that with "tempo recording" checked on the tempo interpreter window, that the taps will record tempo changes, but this does not work. I tried doing this, tapping the key command I defined to tempo tap (ctrl-shift-t), and I was tapping at various speeds-- many taps fast.. and Logic recorded tempos of 99-101bpm.. I was tapping atleast around 175-180bpm. I then tried tapping slowing, and Logic recorded tempos of 99-101 again... so this feature obviously is full of bugs.
    7. When loading songs, as soon as various plugins such as Kontakt, exs24 begin loading samples, it brings logic to the front. If you're working in the background in other applications while waiting for your songs to load, you are rudely interrupted from what you're doing (such as, selecting from a menu, typing a document, etc) only to be forced to watch a status bar fill up.. and then all key presses at that point become error beeps.
    8. Logic's sample memory easily becomes messed up and crazy. Quite often when using AU instruments such as BFD, Culture, and even Synthogy's Ivory. I will switch to that particular track to play on my keyboard, and each sample will be full of horrible pops and clicks-- the kind that destroy speakers. Other times, in a sample of a string for instance, all of a sudden after one second will be a pop and then the sample will be playing at a completely different pitch... I have to remove the AU instrument and reload it at this point.. This happens quite often. Logic should offer a 'buffer reset' so that you can just flash plugins but they reload whatever preset they were set to.
    9. Volume faders resolution are lame! There is no reason why you shouldnt be able to access +1.0, +1.1, +1.2, +1.3, +1.4, +1.5, +1.6, +1.7, +1.8, +1.9... Further the display is only so wide and you can't even read the decimal values for numbers -10 and lower. They just appear as 10.
    10. When a movie is open, and you are viewing the video output via FIREWIRE, there is a mini-floating window which contains the smpte, position, and movie start information-- However you cannot modify any of these values. You have to switch video output back to "WINDOW" to change the start position of the movie. This is obviously a bug.
    11. Changing the movie's start time is very user unfriendly. There should be a simple way to specify to start at a moment of time relative to SMPTE-- So you can just say "+9:15" for example, and it would take you in 9 minutes and 15 seconds, rather than how it is now where you have to think backwards from SMPTE code and subtract.
    12. You cannot view video as a window AND output to firewire. There is no reason why you shouldn't be able to do this. For example, if I wanted to output my video to a monitor in a vocal booth-- I can do this.. but I can't see what the vocalist is seeing on my own screen! This is just nonsense. You should be able to output to the screen (desktop mode or floating window) as well as an external firewire device.
    13. Saving a song with a movie open should mean that when you load that song, the movie should be up and exactly as it was prior to saving. As it is now you have to select "open movie again".
    14. There is still definitely a bug in track automation-- this was really bad back in version 4, but there is still something not quite right here where starting playback will not always guarantee that the automation data is being read.. And in my experiences it results in volumes being incorrect until you stop and play again, and in some cases it will not work at all unless you plot some automation points. This is an intermittent issue-- but quite often activated by placing an audio region from the audio window on a track (SEE VIDEO).
    WATCH VIDEO OF THIS BUG:
    http://collinatorstudios.com/www/logicbugs/logicautomationbug.mov
    15. In the arrange window, sometimes when zoomed in tightly, all parts on a track are selected, and you think that only the part that you are looking at is selected.. you move this part, and now all of your parts are off. Logic should have some kind of visual aid to let you know when ever you are moving multiple selections... Something like, the parts you are moving will highlight a dfferent color or something... This is a similar problem I have with the loop area of the screen.. You can accidentally turn it on when in the matrix window, and have no idea unless you look down at the transport, but with me for example, my transport is at the very bottom of the screen and I am not looking there most of the time.
    16. Automation data, when two points are semi-close to each other, suddenly the value of the data is no longer shown.. I can understand that when you are zoomed out, and there is simply no space for this to visually appear, that's appropriate. But as it is now, it doesn't display this information when there is plenty of space for it to be visible.
    17. Logic should let you set audio track inputs to the various outputs (1-2, 3-4, etc) and buses.
    18. clicking on a track selects ALL parts. This is so so so annoying. How many times have I been editing voice over, and selecting a track, thinking I am shrinking the length of a part, and to find that ALL parts have been shrunk.. SO ANNOYING!!!! This needs to not happen, and there should be a simple way to right-click a track and it will have an option "select all regions"... also, when you click on a track and all parts are selected, if you horizontally zoom, logic zooms into the beginning of the track, rather than the song locator. I don't know what the LOGIC behind this is, but it's not very helpful, it actually is very frustrating.. Zooming should always move towards the song locator position.
    19. EXS 24 should have a "reverse/backwards" button so that samples played are backwards.
    20. Logic should offer a way to globally increase or decrease a specific automation type (especially volume) globally for all tracks... So if you have detailed crescendos that start at -3.8 and end at +1.6, you can add 3db to this and it will now be at 0.8 and end at 4.6.
    21. If you have multiple tracks of the same track (such as three Audio track #1's)-- say you are recording guitar parts, and just copying the track and muting the previous track as a method of maintaining multiple takes for later auditioning. If you draw automation volume data on this track (it appears on all 3 tracks), and then if you delete the audio from one of the muted tracks and tell logic to KEEP it, suddenly all automation data is gone. GRR!!!
    22. Several times I have opened Kontakt, and attempted to load an instrument while outputting a movie via firewire video to my monitor. As soon as I try to load the instrument, the firewire video output on my monitor goes crazy, and then comes back on.. Logic then crashes. This has happened 3 times randomly...
    23. UNDO does not work on every function. for example, if you change an output to bus 1 instead of 1-2, you cannot undo this. Undo should undo whatever the last command was, no matter what it was. This is what the word LOGICal is supposed to represent.
    24. Floating windows (as in plugin windows) should close with apple-w!!!
    25. *BUG* If you are in a part that is say 10 measures long, zoom in horizontally 100% in the matrix window-- You then isolate one specific quarter note pitch in the middle of this measure, and have cycle turned on, looping over this one quarter note, if you are not looking at this note event/loop region when you hit play, the display will jump to the beginning of the part and never show you this note event as it loops. However if you have the note event on screen when you hit play, then it will behave properly. This makes it extremely difficult and frustrating to perform detailed hyper-draw work. (SEE VIDEO)
    WATCH VIDEO OF THIS BUG:
    http://collinatorstudios.com/www/logicbugs/logicloopbug.mov
    26. *BUG* Host Automation is not accurate. I assigned Kontakt's tune knob to C#000, and If I place a dip, the knob begins to move way before the automation data is even present.... So basically what I was trying to do, can't even be accomplished because Logic screws everything up by pitching the instrument too early... Such a shame.. By the way, I previously mentioned the importance of being able to display part data in the arrange window as matrix data (horizontal lines) rather than score data. Someone argued what good this would do-- Well this is a perfect example, if I am attempting to affect a particular section of a note with automation, I can't possible visually see where this is because the length is not described by the current score representation. Having a horizontal representation would solve this problem... (SEE VIDEO)
    WATCH VIDEO OF THIS BUG:
    http://collinatorstudios.com/www/logicbugs/logicctrlchngbug.mov
    27. There should be a way to convert stereo samples to mono in the sample editor.
    28. When you view "as text" in the environmentt, you cannot drag an object to the arrange window-- Such as to create a bus track.. Now mind you I don't know why you can't just select "BUS" when editing a track in the arrange window in the first place, however there is no reason why 'view as text' should behave differently than when it's viewed as icons.
    29. When you drag a bus from the environment to the arrange window, it replaces whatever track was there. It should ADD a track instead of replace-- atleast there should be a preference for how this behaves.
    30. Occasionally when dragging a bus from the environment, there is some visual garbage in the track automation (see screenshot).
    31. There should be a way to LOAD and SAVE selections in the arrange window. Quite often when editing audio from a countless number of parts/regions, it becomes painful when you have to select and move 100s of audio files. There should be a way that you can just select a ton of regions and save that selection, and reload it at anytime. There are a few 'select' tools/options under the edit window, however they are song specific-- not track specific. So they are completely usesless for what I need.
    32. Logic should offer a feature to collect sysex data from midi devices so that patch names show up and can be selected via program change.
    33. When no track or part is selected, and you vertically zoom in, Logic should zoom into the center most track.. It behaves very oddly and zooms in more towards the top. This becomes extremely annoying when dealing with a sequence involving 100 tracks, and a part is selected but you scroll far below where the part is.. When you begin to zoom in, it takes you towards the selected part, yet it's not displayed on the screen and you have no reference for what you are even looking at. The rule should be this: If the part is on the screen, zooming vertically will bring you to it. If it's off the screen, you will zoom into the center track of whatever is currently on the screen.
    34. I mentioned this in a thread earlier... http://discussions.apple.com/thread.jspa?threadID=752485&tstart=0
    There is a bug when using the transform tool involving the 'position' variable. In my example, I was attempting to reverse the time placement of three chords, that occured in a part somewhere in the middle of my song. By selecting the measure start and end of this part, Logic was unable to select or operate with the transform tool (and I tried a variety of transform options). If I moved this part to the beginning of the song, then the transform tool would suddenly work. After some research, I found online someone had said "Position Time position of the event, referenced to the start of the MIDI Region (not of the song)."--- But if I still doubt this is true, because I then placed the part on a new track with no other data, and placed it in the middle of the sequence and in the transform tool under position I selected '1 1 1 1' to '5 5 5 5' as well i tried setting the position to 'all', and none of this worked. This obviously is a bug... If it's not then it's a very serious design flaw. The position should relate to measure numbers of a song, and nothing else.
    WATCH VIDEO OF THIS BUG:
    http://collinatorstudios.com/video/transform.mov
    That is all for now...
    For those who firmly agree with me and all of the points that I have brought up now and in the past, I encourage you to contact Peggie Louie, (the Logic HR department contact) at (408) 996-1010 and suggest that she hire me as a consultant to help eliminate Logic's many annoyances. I have tried to pursue this heavily in the past, but sadly I was completely ignored by her on all levels. Maybe you all can help make a difference?
    Fighting the good fight,
    Patrick J. Collins
    http://collinatorstudios.com

    11. Changing the movie's start time is very user
    unfriendly. There should be a simple way to specify
    to start at a moment of time relative to SMPTE-- So
    you can just say "+9:15" for example, and it would
    take you in 9 minutes and 15 seconds, rather than how
    it is now where you have to think backwards from
    SMPTE code and subtract.
    For this one I'd suggest getting SMPTE calculator. Entering timecode numbers and having to add and subtract is not so difficult, and AFAIC part of a composer's gig. But what I would add, instead, is that it would be fantastic if Logic provided a timecode calculator (edit: even if it was in the form of a custom Logic widget).
    13. Saving a song with a movie open should mean that
    when you load that song, the movie should be up and
    exactly as it was prior to saving. As it is now you
    have to select "open movie again".
    This doesn't always happen. I've struggled with this for a long time, and I don't know why sometimes the movie will load and not other times. I would also add here that Logic should show the file pathname to the movie. Somewhere...
    18. clicking on a track selects ALL parts. This is
    so so so annoying.
    You can prevent this from happening if you have cycle turned on and set to a set of locators that "contain" the parts you might want to select en masse. I always work with cycle=on so this is not a problem.
    21. If you have multiple tracks of the same track
    (such as three Audio track #1's)-- say you are
    recording guitar parts, and just copying the track
    and muting the previous track as a method of
    maintaining multiple takes for later auditioning. If
    you draw automation volume data on this track (it
    appears on all 3 tracks), and then if you delete the
    audio from one of the muted tracks and tell logic to
    KEEP it, suddenly all automation data is gone.
    GRR!!!
    Never had that happen. In my experience, telling Logic to keep the data always works.
    23. UNDO does not work on every function. for
    example, if you change an output to bus 1 instead of
    1-2, you cannot undo this. Undo should undo whatever
    the last command was, no matter what it was. This is
    what the word LOGICal is supposed to represent.
    Undo in Logic is highly problematic for other reasons. Here, I think there should be a specific Environment Undo, just like there's a separate undo for audio edits.
    29. When you drag a bus from the environment to the
    arrange window, it replaces whatever track was there.
    It should ADD a track instead of replace-- atleast
    there should be a preference for how this behaves.
    Right. This is a matter of personal preference. But still there are other ways to get an object assigned to a track. The "thru tool", for instance. No dragging required.
    32. Logic should offer a feature to collect sysex
    data from midi devices so that patch names show up
    and can be selected via program change.
    My guess: considering how much sheer time it takes to write this kind of software, let alone debug it with every conceivable device, it's not likely this is going to happen.
    That is all for now...
    For those who firmly agree with me and all of the
    points that I have brought up now and in the past, I
    encourage you to contact Peggie Louie, (the Logic HR
    department contact) at (408) 996-1010 and suggest
    that she hire me as a consultant to help eliminate
    Logic's many annoyances. I have tried to pursue this
    heavily in the past, but sadly I was completely
    ignored by her on all levels. Maybe you all can help
    make a difference?
    Wait in line buddy!
    (LOL)
    I must say, I'm very impressed with your list and attention to detail. And I feel your pain, trust me. But many of the things you've listed are feature requests and not bugs. And some of the behaviors you've described I have yet to run across. So this is typical with Logic, that it can be operated in so many diverse ways that no two people run it in the same way, nor would two people conceive the program's capabilities in the same way. But I digress...
    I also think there's a certain amount of Logic convention that I don't think you've adopted yet, hence your wish for behaviors that don't yet exist.
    I don't disagree with most of your feature requests, and I'm (quite unfortunately) able to say that I'm familiar with most of these bugs and about 9 dozen more. But again, it's important to distinguish between bug, feature request, time to RTFM, and errant behavior that's experienced by a very limited number of users.
    There's no doubt that this program has its problems. In particular, your #1 re the playback buffer. And I'm glad you've brought many of the bugs into the light for people to read. Good work.

  • Problems with Steam - Dota2 and ETS2

    Hello
    I had never problems with Arch + xfce but last time I made fresh install of Arch with KDE and problems begins. Strange logs in steam running Dota 2 and Euro Truck Simulator 2. Dota 2 freezing, jumping even 60+ fps, both games can freeze for 1 min with sound.
    Lenovo Y580 - GTX660M
    After running Dota 2 with launch options (optirun -b primus %command% -console) output from console:
    Game update: AppID 570 "Dota 2", ProcID 1441, IP 0.0.0.0:0
    ERROR: ld.so: object '/home/akikyo/.local/share/Steam/ubuntu12_32/gameoverlayrenderer.so' from LD_PRELOAD cannot be preloaded (wrong ELF class: ELFCLASS32): ignored.
    ERROR: ld.so: object '/home/akikyo/.local/share/Steam/ubuntu12_32/gameoverlayrenderer.so' from LD_PRELOAD cannot be preloaded (wrong ELF class: ELFCLASS32): ignored.
    (steam:1358): LIBDBUSMENU-GLIB-WARNING **: Trying to remove a child that doesn't believe we're it's parent.
    (steam:1358): LIBDBUSMENU-GLIB-WARNING **: Trying to remove a child that doesn't believe we're it's parent.
    (steam:1358): LIBDBUSMENU-GLIB-WARNING **: Trying to remove a child that doesn't believe we're it's parent.
    (steam:1358): LIBDBUSMENU-GLIB-WARNING **: Trying to remove a child that doesn't believe we're it's parent.
    (steam:1358): LIBDBUSMENU-GLIB-WARNING **: Trying to remove a child that doesn't believe we're it's parent.
    (steam:1358): LIBDBUSMENU-GLIB-WARNING **: Trying to remove a child that doesn't believe we're it's parent.
    (steam:1358): LIBDBUSMENU-GLIB-WARNING **: Trying to remove a child that doesn't believe we're it's parent.
    (steam:1358): LIBDBUSMENU-GLIB-WARNING **: Trying to remove a child that doesn't believe we're it's parent.
    (steam:1358): LIBDBUSMENU-GLIB-WARNING **: Trying to remove a child that doesn't believe we're it's parent.
    (steam:1358): LIBDBUSMENU-GLIB-WARNING **: Trying to remove a child that doesn't believe we're it's parent.
    (steam:1358): LIBDBUSMENU-GLIB-WARNING **: Trying to remove a child that doesn't believe we're it's parent.
    (steam:1358): LIBDBUSMENU-GLIB-WARNING **: Trying to remove a child that doesn't believe we're it's parent.
    (steam:1358): LIBDBUSMENU-GLIB-WARNING **: Trying to remove a child that doesn't believe we're it's parent.
    (steam:1358): LIBDBUSMENU-GLIB-WARNING **: Trying to remove a child that doesn't believe we're it's parent.
    (steam:1358): LIBDBUSMENU-GLIB-WARNING **: Trying to remove a child that doesn't believe we're it's parent.
    (steam:1358): LIBDBUSMENU-GLIB-WARNING **: Trying to remove a child that doesn't believe we're it's parent.
    (steam:1358): LIBDBUSMENU-GLIB-WARNING **: Trying to remove a child that doesn't believe we're it's parent.
    (steam:1358): LIBDBUSMENU-GLIB-WARNING **: Trying to remove a child that doesn't believe we're it's parent.
    (steam:1358): LIBDBUSMENU-GLIB-WARNING **: Trying to remove a child that doesn't believe we're it's parent.
    (steam:1358): LIBDBUSMENU-GLIB-WARNING **: Trying to remove a child that doesn't believe we're it's parent.
    (steam:1358): LIBDBUSMENU-GLIB-WARNING **: Trying to remove a child that doesn't believe we're it's parent.
    (steam:1358): LIBDBUSMENU-GLIB-WARNING **: Trying to remove a child that doesn't believe we're it's parent.
    (steam:1358): LIBDBUSMENU-GLIB-WARNING **: Trying to remove a child that doesn't believe we're it's parent.
    (steam:1358): LIBDBUSMENU-GLIB-WARNING **: Trying to remove a child that doesn't believe we're it's parent.
    (steam:1358): LIBDBUSMENU-GLIB-WARNING **: Trying to remove a child that doesn't believe we're it's parent.
    (steam:1358): LIBDBUSMENU-GLIB-WARNING **: Trying to remove a child that doesn't believe we're it's parent.
    (steam:1358): LIBDBUSMENU-GLIB-WARNING **: Trying to remove a child that doesn't believe we're it's parent.
    (steam:1358): LIBDBUSMENU-GLIB-WARNING **: Trying to remove a child that doesn't believe we're it's parent.
    ERROR: ld.so: object '/home/akikyo/.local/share/Steam/ubuntu12_32/gameoverlayrenderer.so' from LD_PRELOAD cannot be preloaded (wrong ELF class: ELFCLASS32): ignored.
    pid 1455 != 1454, skipping destruction (fork without exec?)
    ERROR: ld.so: object '/home/akikyo/.local/share/Steam/ubuntu12_32/gameoverlayrenderer.so' from LD_PRELOAD cannot be preloaded (wrong ELF class: ELFCLASS32): ignored.
    ERROR: ld.so: object '/home/akikyo/.local/share/Steam/ubuntu12_64/gameoverlayrenderer.so' from LD_PRELOAD cannot be preloaded (wrong ELF class: ELFCLASS64): ignored.
    Installing breakpad exception handler for appid(gameoverlayui)/version(20140715181500_client)
    Installing breakpad exception handler for appid(gameoverlayui)/version(1.0_client)
    Installing breakpad exception handler for appid(gameoverlayui)/version(1.0_client)
    Fontconfig error: "/etc/fonts/conf.d/10-scale-bitmap-fonts.conf", line 70: non-double matrix element
    Fontconfig error: "/etc/fonts/conf.d/10-scale-bitmap-fonts.conf", line 70: non-double matrix element
    Fontconfig warning: "/etc/fonts/conf.d/10-scale-bitmap-fonts.conf", line 78: saw unknown, expected number
    [0725/222647:ERROR:object_proxy.cc(239)] Failed to call method: org.freedesktop.DBus.Error.ServiceUnknown: The name org.freedesktop.NetworkManager was not provided by any .service files
    [0725/222647:WARNING:proxy_service.cc(958)] PAC support disabled because there is no system implementation
    Installing breakpad exception handler for appid(gameoverlayui)/version(1.0_client)
    Using breakpad crash handler
    Setting breakpad minidump AppID = 570
    Forcing breakpad minidump interfaces to load
    Looking up breakpad interfaces from steamclient
    Calling BreakpadMiniDumpSystemInit
    Looking up breakpad interfaces from steamclient
    Calling BreakpadMiniDumpSystemInit
    Steam_SetMinidumpSteamID: Caching Steam ID: 76561198074650116 [API loaded yes]
    Steam_SetMinidumpSteamID: Setting Steam ID: 76561198074650116
    SDL video target is 'x11'
    SDL failed to create GL compatibility profile (whichProfile=0!
    This system supports the OpenGL extension GL_EXT_framebuffer_object.
    This system supports the OpenGL extension GL_EXT_framebuffer_blit.
    This system supports the OpenGL extension GL_EXT_framebuffer_multisample.
    This system DOES NOT support the OpenGL extension GL_APPLE_fence.
    This system supports the OpenGL extension GL_NV_fence.
    This system supports the OpenGL extension GL_ARB_sync.
    This system supports the OpenGL extension GL_EXT_draw_buffers2.
    This system supports the OpenGL extension GL_EXT_bindable_uniform.
    This system DOES NOT support the OpenGL extension GL_APPLE_flush_buffer_range.
    This system supports the OpenGL extension GL_ARB_map_buffer_range.
    This system supports the OpenGL extension GL_ARB_vertex_buffer_object.
    This system supports the OpenGL extension GL_ARB_occlusion_query.
    This system DOES NOT support the OpenGL extension GL_APPLE_texture_range.
    This system DOES NOT support the OpenGL extension GL_APPLE_client_storage.
    This system DOES NOT support the OpenGL extension GL_ARB_uniform_buffer.
    This system supports the OpenGL extension GL_ARB_vertex_array_bgra.
    This system supports the OpenGL extension GL_EXT_vertex_array_bgra.
    This system supports the OpenGL extension GL_ARB_framebuffer_object.
    This system DOES NOT support the OpenGL extension GL_GREMEDY_string_marker.
    This system supports the OpenGL extension GL_ARB_debug_output.
    This system supports the OpenGL extension GL_EXT_direct_state_access.
    This system supports the OpenGL extension GL_NV_bindless_texture.
    This system DOES NOT support the OpenGL extension GL_AMD_pinned_memory.
    This system supports the OpenGL extension GL_EXT_framebuffer_multisample_blit_scaled.
    This system supports the OpenGL extension GL_EXT_texture_sRGB_decode.
    This system supports the OpenGL extension GL_NVX_gpu_memory_info.
    This system DOES NOT support the OpenGL extension GL_ATI_meminfo.
    This system supports the OpenGL extension GL_EXT_texture_compression_s3tc.
    This system supports the OpenGL extension GL_EXT_texture_compression_dxt1.
    This system DOES NOT support the OpenGL extension GL_ANGLE_texture_compression_dxt3.
    This system DOES NOT support the OpenGL extension GL_ANGLE_texture_compression_dxt5.
    This system DOES NOT support the OpenGL extension GLX_EXT_swap_control_tear.
    GL_NV_bindless_texture: DISABLED
    GL_AMD_pinned_memory: DISABLED
    GL_EXT_texture_sRGB_decode: AVAILABLE
    GL_NVX_gpu_memory_info: AVAILABLE
    GL_ATI_meminfo: UNAVAILABLE
    GL_NVX_gpu_memory_info: Total Dedicated: 2097152, Total Avail: 2097152, Current Avail: 2076116
    GL_MAX_SAMPLES_EXT: 32
    Adding VPK file: /home/akikyo/.local/share/Steam/SteamApps/common/dota 2 beta/dota/sound_vo_english
    Adding VPK file: /home/akikyo/.local/share/Steam/SteamApps/common/dota 2 beta/dota/pak01
    Adding VPK file: /home/akikyo/.local/share/Steam/SteamApps/common/dota 2 beta/platform/pak01
    Did not detect any valid joysticks.
    WARNING: unable to link Test_StartScript and Test_StartScript because one or more is a ConCommand.
    WARNING: unable to link Test_RandomChance and Test_RandomChance because one or more is a ConCommand.
    WARNING: unable to link Test_LoopForNumSeconds and Test_LoopForNumSeconds because one or more is a ConCommand.
    WARNING: unable to link Test_Loop and Test_Loop because one or more is a ConCommand.
    WARNING: unable to link Test_LoopCount and Test_LoopCount because one or more is a ConCommand.
    WARNING: unable to link Test_StartLoop and Test_StartLoop because one or more is a ConCommand.
    WARNING: unable to link log_flags and log_flags because one or more is a ConCommand.
    WARNING: unable to link log_color and log_color because one or more is a ConCommand.
    WARNING: unable to link log_verbosity and log_verbosity because one or more is a ConCommand.
    WARNING: unable to link log_level and log_level because one or more is a ConCommand.
    WARNING: unable to link log_dumpchannels and log_dumpchannels because one or more is a ConCommand.
    Load a scaleform font provider?
    Creating D3D9 device with D3DCREATE_MULTITHREADED
    IDirect3DDevice9::Create: BackBufWidth: 1366, BackBufHeight: 768, D3DFMT: 3, BackBufCount: 1, MultisampleType: 0, MultisampleQuality: 0
    GL sampler object usage: DISABLED
    ##### swap interval = 0 swap limit = 1 #####
    Fontconfig error: "/etc/fonts/conf.d/10-scale-bitmap-fonts.conf", line 70: non-double matrix element
    Fontconfig error: "/etc/fonts/conf.d/10-scale-bitmap-fonts.conf", line 70: non-double matrix element
    Fontconfig warning: "/etc/fonts/conf.d/10-scale-bitmap-fonts.conf", line 78: saw unknown, expected number
    !! Controller config file passed by steamworks game 570 did not exist at /home/akikyo/.local/share/Steam/SteamApps/common/dota 2 beta/dota/cfg/controller.vdf
    Installing breakpad exception handler for appid(steam)/version(1405474565_client)
    [0725/222707:ERROR:object_proxy.cc(239)] Failed to call method: org.freedesktop.DBus.Error.ServiceUnknown: The name org.freedesktop.NetworkManager was not provided by any .service files
    [0725/222707:WARNING:proxy_service.cc(958)] PAC support disabled because there is no system implementation
    Im not able to run ETS 2 it's going to change resolution to 1024x768 in whole desktop and then crash. (Launch option: optirun -b primus %command%) output:
    Game update: AppID 227300 "Euro Truck Simulator 2", ProcID 1554, IP 0.0.0.0:0
    ERROR: ld.so: object '/home/akikyo/.local/share/Steam/ubuntu12_32/gameoverlayrenderer.so' from LD_PRELOAD cannot be preloaded (wrong ELF class: ELFCLASS32): ignored.
    ERROR: ld.so: object '/home/akikyo/.local/share/Steam/ubuntu12_32/gameoverlayrenderer.so' from LD_PRELOAD cannot be preloaded (wrong ELF class: ELFCLASS32): ignored.
    (steam:1358): LIBDBUSMENU-GLIB-WARNING **: Trying to remove a child that doesn't believe we're it's parent.
    (steam:1358): LIBDBUSMENU-GLIB-WARNING **: Trying to remove a child that doesn't believe we're it's parent.
    (steam:1358): LIBDBUSMENU-GLIB-WARNING **: Trying to remove a child that doesn't believe we're it's parent.
    (steam:1358): LIBDBUSMENU-GLIB-WARNING **: Trying to remove a child that doesn't believe we're it's parent.
    (steam:1358): LIBDBUSMENU-GLIB-WARNING **: Trying to remove a child that doesn't believe we're it's parent.
    (steam:1358): LIBDBUSMENU-GLIB-WARNING **: Trying to remove a child that doesn't believe we're it's parent.
    (steam:1358): LIBDBUSMENU-GLIB-WARNING **: Trying to remove a child that doesn't believe we're it's parent.
    (steam:1358): LIBDBUSMENU-GLIB-WARNING **: Trying to remove a child that doesn't believe we're it's parent.
    (steam:1358): LIBDBUSMENU-GLIB-WARNING **: Trying to remove a child that doesn't believe we're it's parent.
    (steam:1358): LIBDBUSMENU-GLIB-WARNING **: Trying to remove a child that doesn't believe we're it's parent.
    (steam:1358): LIBDBUSMENU-GLIB-WARNING **: Trying to remove a child that doesn't believe we're it's parent.
    (steam:1358): LIBDBUSMENU-GLIB-WARNING **: Trying to remove a child that doesn't believe we're it's parent.
    (steam:1358): LIBDBUSMENU-GLIB-WARNING **: Trying to remove a child that doesn't believe we're it's parent.
    (steam:1358): LIBDBUSMENU-GLIB-WARNING **: Trying to remove a child that doesn't believe we're it's parent.
    ERROR: ld.so: object '/home/akikyo/.local/share/Steam/ubuntu12_32/gameoverlayrenderer.so' from LD_PRELOAD cannot be preloaded (wrong ELF class: ELFCLASS32): ignored.
    Setting breakpad minidump AppID = 227300
    Steam_SetMinidumpSteamID: Caching Steam ID: 76561198074650116 [API loaded no]
    Registered appid 227300 to use native controller config at /home/akikyo/.local/share/Steam/SteamApps/common/Euro Truck Simulator 2/controller.vdf
    X Error of failed request: GLXUnsupportedPrivateRequest
    Major opcode of failed request: 155 (GLX)
    Minor opcode of failed request: 16 (X_GLXVendorPrivate)
    Serial number of failed request: 80
    Current serial number in output stream: 82
    Game removed: AppID 227300 "Euro Truck Simulator 2", ProcID 1567
    sudo journalctl
    Jul 25 22:35:15 lenovo bumblebeed[396]: [ 891.508930] [WARN][XORG] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
    Jul 25 22:35:15 lenovo bumblebeed[396]: [ 891.508943] [WARN][XORG] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
    Jul 25 22:35:15 lenovo bumblebeed[396]: [ 891.508969] [WARN][XORG] (WW) Unresolved symbol: fbGetGCPrivateKey
    Jul 25 22:35:15 lenovo bumblebeed[396]: [ 891.508984] [WARN][XORG] (WW) NVIDIA(0): Unable to get display device for DPI computation.
    Jul 25 22:35:16 lenovo kernel: eurotrucks2[1567]: segfault at 17 ip 00007f40f1e30433 sp 00007fff05479db0 error 6 in steamclient.so[7f40f1b66000+f7b000]
    Jul 25 22:35:16 lenovo kernel: [drm] Module unloaded
    Jul 25 22:35:16 lenovo kernel: bbswitch: disabling discrete graphics
    Jul 25 22:35:16 lenovo kernel: ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20140214/nsarguments-95)
    Jul 25 22:35:16 lenovo kernel: pci 0000:01:00.0: Refused to change power state, currently in D0
    Jul 25 22:35:17 lenovo bumblebeed[396]: [ 892.838215] [ERROR][XORG] (EE) Server terminated successfully (0). Closing log file.
    Jul 25 22:35:17 lenovo bumblebeed[396]: [ 892.838233] [ERROR][XORG] (EE)
    Jul 25 22:35:17 lenovo bumblebeed[396]: [ 892.838238] [ERROR][XORG] (EE) Backtrace:
    Jul 25 22:35:17 lenovo bumblebeed[396]: [ 892.838242] [ERROR][XORG] (EE) 0: Xorg (xorg_backtrace+0x56) [0x58f186]
    Jul 25 22:35:17 lenovo bumblebeed[396]: [ 892.838245] [ERROR][XORG] (EE) 1: Xorg (0x400000+0x192fc9) [0x592fc9]
    Jul 25 22:35:17 lenovo bumblebeed[396]: [ 892.838249] [ERROR][XORG] (EE) 2: /usr/lib/libpthread.so.0 (0x7fd21c5c8000+0xf4b0) [0x7fd21c5d74b0]
    Jul 25 22:35:17 lenovo bumblebeed[396]: [ 892.838256] [ERROR][XORG] (EE) 3: /usr/lib/libc.so.6 (malloc_usable_size+0x25) [0x7fd21b290d25]
    Jul 25 22:35:17 lenovo bumblebeed[396]: [ 892.838272] [ERROR][XORG] (EE) 4: /usr/lib/nvidia/libGL.so.1 (0x7fd21818b000+0xb61d9) [0x7fd2182411d9]
    Jul 25 22:35:17 lenovo bumblebeed[396]: [ 892.838286] [ERROR][XORG] (EE)
    Jul 25 22:35:17 lenovo bumblebeed[396]: [ 892.838298] [ERROR][XORG] (EE) Segmentation fault at address 0x0
    Jul 25 22:35:17 lenovo bumblebeed[396]: [ 892.838306] [ERROR][XORG] (EE)
    Jul 25 22:35:17 lenovo bumblebeed[396]: [ 892.838317] [ERROR][XORG] (EE) Caught signal 11 (Segmentation fault). Server aborting
    Jul 25 22:35:17 lenovo bumblebeed[396]: [ 892.838320] [ERROR][XORG] (EE)
    Jul 25 22:35:17 lenovo bumblebeed[396]: [ 892.838323] [ERROR][XORG] (EE)
    Jul 25 22:35:17 lenovo bumblebeed[396]: [ 892.838329] [ERROR][XORG] (EE) Please also check the log file at "/var/log/Xorg.8.log" for additional information.
    Jul 25 22:35:17 lenovo bumblebeed[396]: [ 892.838334] [ERROR][XORG] (EE)
    sudo nano /var/log/Xorg.8.log
    X.Org X Server 1.15.2
    Release Date: 2014-06-27
    [ 887.399] X Protocol Version 11, Revision 0
    [ 887.399] Build Operating System: Linux 3.15.1-1-ARCH x86_64
    [ 887.399] Current Operating System: Linux lenovo 3.15.5-2-ARCH #1 SMP PREEMPT Fri Jul 11 07:56:02 CEST 2014 x86_64
    [ 887.399] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=a89135f9-ef1e-4b90-a073-ee78d492b58a rw rcutree.rcu_idle_gp_delay=1 quiet
    [ 887.399] Build Date: 27 June 2014 07:32:26PM
    [ 887.399]
    [ 887.399] Current version of pixman: 0.32.6
    [ 887.399] Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
    [ 887.399] Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    [ 887.399] (==) Log file: "/var/log/Xorg.8.log", Time: Fri Jul 25 22:35:11 2014
    [ 887.400] (++) Using config file: "/etc/bumblebee/xorg.conf.nvidia"
    [ 887.400] (++) Using config directory: "/etc/bumblebee/xorg.conf.d"
    [ 887.400] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
    [ 887.400] (==) ServerLayout "Layout0"
    [ 887.400] (==) No screen section available. Using defaults.
    [ 887.400] (**) |-->Screen "Default Screen Section" (0)
    [ 887.400] (**) | |-->Monitor "<default monitor>"
    [ 887.400] (==) No device specified for screen "Default Screen Section".
    Using the first device section listed.
    [ 887.400] (**) | |-->Device "DiscreteNvidia"
    [ 887.400] (==) No monitor specified for screen "Default Screen Section".
    Using a default monitor configuration.
    [ 887.400] (**) Option "AutoAddDevices" "false"
    [ 887.400] (**) Option "AutoAddGPU" "false"
    [ 887.400] (**) Not automatically adding devices
    [ 887.400] (==) Automatically enabling devices
    [ 887.400] (**) Not automatically adding GPU devices
    [ 887.401] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
    [ 887.401] Entry deleted from font path.
    [ 887.401] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
    [ 887.401] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
    [ 887.401] Entry deleted from font path.
    [ 887.401] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
    [ 887.401] (==) FontPath set to:
    /usr/share/fonts/misc/,
    /usr/share/fonts/TTF/,
    /usr/share/fonts/OTF/,
    /usr/share/fonts/Type1/
    [ 887.401] (++) ModulePath set to "/usr/lib/nvidia/xorg/,/usr/lib/xorg/modules"
    [ 887.401] (==) |-->Input Device "<default pointer>"
    [ 887.401] (==) |-->Input Device "<default keyboard>"
    [ 887.401] (==) The core pointer device wasn't specified explicitly in the layout.
    Using the default mouse configuration.
    [ 887.401] (==) The core keyboard device wasn't specified explicitly in the layout.
    Using the default keyboard configuration.
    [ 887.401] (II) Loader magic: 0x811cc0
    [ 887.401] (II) Module ABI versions:
    [ 887.401] X.Org ANSI C Emulation: 0.4
    [ 887.401] X.Org Video Driver: 15.0
    [ 887.401] X.Org XInput driver : 20.0
    [ 887.401] X.Org Server Extension : 8.0
    [ 887.401] (II) xfree86: Adding drm device (/dev/dri/card1)
    [ 887.401] (II) xfree86: Adding drm device (/dev/dri/card0)
    [ 887.401] setversion 1.4 failed: Permission denied
    [ 887.403] (--) PCI:*(0:1:0:0) 10de:0fd4:17aa:3977 rev 161, Mem @ 0xd2000000/16777216, 0xc0000000/268435456, 0xd0000000/33554432, I/O @ 0x00003000/128
    [ 887.403] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
    [ 887.403] Initializing built-in extension Generic Event Extension
    [ 887.404] Initializing built-in extension SHAPE
    [ 887.404] Initializing built-in extension MIT-SHM
    [ 887.404] Initializing built-in extension XInputExtension
    [ 887.404] Initializing built-in extension XTEST
    [ 887.404] Initializing built-in extension BIG-REQUESTS
    [ 887.404] Initializing built-in extension SYNC
    [ 887.404] Initializing built-in extension XKEYBOARD
    [ 887.404] Initializing built-in extension XC-MISC
    [ 887.404] Initializing built-in extension SECURITY
    [ 887.404] Initializing built-in extension XINERAMA
    [ 887.404] Initializing built-in extension XFIXES
    [ 887.404] Initializing built-in extension RENDER
    [ 887.404] Initializing built-in extension RANDR
    [ 887.404] Initializing built-in extension COMPOSITE
    [ 887.404] Initializing built-in extension DAMAGE
    [ 887.404] Initializing built-in extension MIT-SCREEN-SAVER
    [ 887.404] Initializing built-in extension DOUBLE-BUFFER
    [ 887.404] Initializing built-in extension RECORD
    [ 887.404] Initializing built-in extension DPMS
    [ 887.404] Initializing built-in extension Present
    [ 887.404] Initializing built-in extension DRI3
    [ 887.404] Initializing built-in extension X-Resource
    [ 887.404] Initializing built-in extension XVideo
    [ 887.404] Initializing built-in extension XVideo-MotionCompensation
    [ 887.404] Initializing built-in extension XFree86-VidModeExtension
    [ 887.404] Initializing built-in extension XFree86-DGA
    [ 887.404] Initializing built-in extension XFree86-DRI
    [ 887.404] Initializing built-in extension DRI2
    [ 887.404] (II) "glx" will be loaded by default.
    [ 887.404] (II) LoadModule: "dri2"
    [ 887.404] (II) Module "dri2" already built-in
    [ 887.404] (II) LoadModule: "glamoregl"
    [ 887.404] (II) Loading /usr/lib/xorg/modules/libglamoregl.so
    [ 887.454] (II) Module glamoregl: vendor="X.Org Foundation"
    [ 887.454] compiled for 1.15.0, module version = 0.6.0
    [ 887.454] ABI class: X.Org ANSI C Emulation, version 0.4
    [ 887.454] (II) LoadModule: "glx"
    [ 887.454] (II) Loading /usr/lib/nvidia/xorg/modules/extensions/libglx.so
    [ 887.495] (II) Module glx: vendor="NVIDIA Corporation"
    [ 887.495] compiled for 4.0.2, module version = 1.0.0
    [ 887.495] Module class: X.Org Server Extension
    [ 887.495] (II) NVIDIA GLX Module 340.24 Wed Jul 2 15:04:31 PDT 2014
    [ 887.495] Loading extension GLX
    [ 887.495] (II) LoadModule: "nvidia"
    [ 887.495] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
    [ 887.500] (II) Module nvidia: vendor="NVIDIA Corporation"
    [ 887.500] compiled for 4.0.2, module version = 1.0.0
    [ 887.500] Module class: X.Org Video Driver
    [ 887.500] (II) LoadModule: "mouse"
    [ 887.500] (II) Loading /usr/lib/xorg/modules/input/mouse_drv.so
    [ 887.502] (II) Module mouse: vendor="X.Org Foundation"
    [ 887.502] compiled for 1.15.0, module version = 1.9.0
    [ 887.502] Module class: X.Org XInput Driver
    [ 887.502] ABI class: X.Org XInput driver, version 20.0
    [ 887.502] (II) LoadModule: "kbd"
    [ 887.502] (WW) Warning, couldn't open module kbd
    [ 887.502] (II) UnloadModule: "kbd"
    [ 887.502] (II) Unloading kbd
    [ 887.502] (EE) Failed to load module "kbd" (module does not exist, 0)
    [ 887.502] (II) NVIDIA dlloader X Driver 340.24 Wed Jul 2 14:42:23 PDT 2014
    [ 887.502] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
    [ 887.502] (--) using VT number 1
    [ 887.502] (II) Loading sub module "fb"
    [ 887.502] (II) LoadModule: "fb"
    [ 887.502] (II) Loading /usr/lib/xorg/modules/libfb.so
    [ 887.504] (II) Module fb: vendor="X.Org Foundation"
    [ 887.504] compiled for 1.15.2, module version = 1.0.0
    [ 887.504] ABI class: X.Org ANSI C Emulation, version 0.4
    [ 887.504] (WW) Unresolved symbol: fbGetGCPrivateKey
    [ 887.504] (II) Loading sub module "wfb"
    [ 887.504] (II) LoadModule: "wfb"
    [ 887.504] (II) Loading /usr/lib/xorg/modules/libwfb.so
    [ 887.506] (II) Module wfb: vendor="X.Org Foundation"
    [ 887.506] compiled for 1.15.2, module version = 1.0.0
    [ 887.506] ABI class: X.Org ANSI C Emulation, version 0.4
    [ 887.506] (II) Loading sub module "ramdac"
    [ 887.506] (II) LoadModule: "ramdac"
    [ 887.506] (II) Module "ramdac" already built-in
    [ 887.506] (II) NVIDIA(0): Creating default Display subsection in Screen section
    "Default Screen Section" for depth/fbbpp 24/32
    [ 887.506] (==) NVIDIA(0): Depth 24, (==) framebuffer bpp 32
    [ 887.506] (==) NVIDIA(0): RGB weight 888
    [ 887.506] (==) NVIDIA(0): Default visual is TrueColor
    [ 887.506] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
    [ 887.506] (**) NVIDIA(0): Option "NoLogo" "true"
    [ 887.506] (**) NVIDIA(0): Option "ProbeAllGpus" "false"
    [ 887.507] (**) NVIDIA(0): Option "UseEDID" "false"
    [ 887.507] (**) NVIDIA(0): Option "UseDisplayDevice" "none"
    [ 887.507] (**) NVIDIA(0): Enabling 2D acceleration
    [ 887.507] (**) NVIDIA(0): Ignoring EDIDs
    [ 887.507] (**) NVIDIA(0): Option "UseDisplayDevice" set to "none"; enabling NoScanout
    [ 887.507] (**) NVIDIA(0): mode
    [ 891.006] (II) NVIDIA(GPU-0): Found DRM driver nvidia-drm (20130102)
    [ 891.008] (II) NVIDIA(0): NVIDIA GPU GeForce GTX 660M (GK107) at PCI:1:0:0 (GPU-0)
    [ 891.008] (--) NVIDIA(0): Memory: 2097152 kBytes
    [ 891.008] (--) NVIDIA(0): VideoBIOS: 80.07.3c.00.16
    [ 891.008] (II) NVIDIA(0): Detected PCI Express Link width: 16X
    [ 891.008] (--) NVIDIA(0): Valid display device(s) on GeForce GTX 660M at PCI:1:0:0
    [ 891.008] (--) NVIDIA(0): none
    [ 891.008] (II) NVIDIA(0): Validated MetaModes:
    [ 891.008] (II) NVIDIA(0): "NULL"
    [ 891.008] (II) NVIDIA(0): Virtual screen size determined to be 640 x 480
    [ 891.008] (WW) NVIDIA(0): Unable to get display device for DPI computation.
    [ 891.008] (==) NVIDIA(0): DPI set to (75, 75); computed from built-in default
    [ 891.008] (--) Depth 24 pixmap format is 32 bpp
    [ 891.008] (II) NVIDIA: Using 3072.00 MB of virtual memory for indirect memory
    [ 891.008] (II) NVIDIA: access.
    [ 891.013] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
    [ 891.013] (II) NVIDIA(0): may not be running or the "AcpidSocketPath" X
    [ 891.013] (II) NVIDIA(0): configuration option may not be set correctly. When the
    [ 891.013] (II) NVIDIA(0): ACPI event daemon is available, the NVIDIA X driver will
    [ 891.013] (II) NVIDIA(0): try to use it to receive ACPI event notifications. For
    [ 891.013] (II) NVIDIA(0): details, please see the "ConnectToAcpid" and
    [ 891.013] (II) NVIDIA(0): "AcpidSocketPath" X configuration options in Appendix B: X
    [ 891.013] (II) NVIDIA(0): Config Options in the README.
    [ 891.013] (II) NVIDIA(0): Setting mode "NULL"
    [ 891.028] Loading extension NV-GLX
    [ 891.035] (==) NVIDIA(0): Disabling shared memory pixmaps
    [ 891.035] (==) NVIDIA(0): Backing store enabled
    [ 891.035] (==) NVIDIA(0): Silken mouse enabled
    [ 891.035] (==) NVIDIA(0): DPMS enabled
    [ 891.035] Loading extension NV-CONTROL
    [ 891.036] (II) Loading sub module "dri2"
    [ 891.036] (II) LoadModule: "dri2"
    [ 891.036] (II) Module "dri2" already built-in
    [ 891.036] (II) NVIDIA(0): [DRI2] Setup complete
    [ 891.036] (II) NVIDIA(0): [DRI2] VDPAU driver: nvidia
    [ 891.036] (--) RandR disabled
    [ 891.044] (II) Initializing extension GLX
    [ 891.100] (II) Using input driver 'mouse' for '<default pointer>'
    [ 891.100] (**) Option "CorePointer" "on"
    [ 891.100] (**) <default pointer>: always reports core events
    [ 891.100] (WW) <default pointer>: No Device specified, looking for one...
    [ 891.146] (II) <default pointer>: Setting Device option to "/dev/input/mice"
    [ 891.146] (--) <default pointer>: Device: "/dev/input/mice"
    [ 891.146] (==) <default pointer>: Protocol: "Auto"
    [ 891.146] (**) <default pointer>: always reports core events
    [ 891.146] (**) Option "Device" "/dev/input/mice"
    [ 891.200] (==) <default pointer>: Emulate3Buttons, Emulate3Timeout: 50
    [ 891.200] (**) <default pointer>: ZAxisMapping: buttons 4 and 5
    [ 891.200] (**) <default pointer>: Buttons: 9
    [ 891.200] (II) XINPUT: Adding extended input device "<default pointer>" (type: MOUSE, id 6)
    [ 891.200] (**) <default pointer>: (accel) keeping acceleration scheme 1
    [ 891.200] (**) <default pointer>: (accel) acceleration profile 0
    [ 891.200] (**) <default pointer>: (accel) acceleration factor: 2.000
    [ 891.200] (**) <default pointer>: (accel) acceleration threshold: 4
    [ 891.200] (II) <default pointer>: Setting mouse protocol to "ExplorerPS/2"
    [ 891.493] (II) <default pointer>: ps2EnableDataReporting: succeeded
    [ 891.493] (II) LoadModule: "kbd"
    [ 891.494] (WW) Warning, couldn't open module kbd
    [ 891.494] (II) UnloadModule: "kbd"
    [ 891.494] (II) Unloading kbd
    [ 891.494] (EE) Failed to load module "kbd" (module does not exist, 0)
    [ 891.494] (EE) No input driver matching `kbd'
    [ 891.497] (II) config/udev: Adding input device Power Button (/dev/input/event3)
    [ 891.497] (II) AutoAddDevices is off - not adding device.
    [ 891.497] (II) config/udev: Adding input device Video Bus (/dev/input/event5)
    [ 891.497] (II) AutoAddDevices is off - not adding device.
    [ 891.497] (II) config/udev: Adding input device Power Button (/dev/input/event0)
    [ 891.497] (II) AutoAddDevices is off - not adding device.
    [ 891.498] (II) config/udev: Adding input device Sleep Button (/dev/input/event1)
    [ 891.498] (II) AutoAddDevices is off - not adding device.
    [ 891.498] (II) config/udev: Adding input device Video Bus (/dev/input/event4)
    [ 891.498] (II) AutoAddDevices is off - not adding device.
    [ 891.498] (II) config/udev: Adding input device Lid Switch (/dev/input/event2)
    [ 891.498] (II) AutoAddDevices is off - not adding device.
    [ 891.499] (II) config/udev: Adding drm device (/dev/dri/card1)
    [ 891.499] (II) config/udev: Adding drm device (/dev/dri/card0)
    [ 891.499] (II) xfree86: Adding drm device (/dev/dri/card0)
    [ 891.499] setversion 1.4 failed: Permission denied
    [ 891.499] (II) config/udev: Adding input device Logitech USB Optical Mouse (/dev/input/event7)
    [ 891.499] (II) AutoAddDevices is off - not adding device.
    [ 891.500] (II) config/udev: Adding input device Logitech USB Optical Mouse (/dev/input/mouse0)
    [ 891.500] (II) AutoAddDevices is off - not adding device.
    [ 891.500] (II) config/udev: Adding input device CHESEN USB Keyboard (/dev/input/event8)
    [ 891.500] (II) AutoAddDevices is off - not adding device.
    [ 891.501] (II) config/udev: Adding input device CHESEN USB Keyboard (/dev/input/event9)
    [ 891.501] (II) AutoAddDevices is off - not adding device.
    [ 891.501] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event12)
    [ 891.501] (II) AutoAddDevices is off - not adding device.
    [ 891.501] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event13)
    [ 891.501] (II) AutoAddDevices is off - not adding device.
    [ 891.502] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event14)
    [ 891.502] (II) AutoAddDevices is off - not adding device.
    [ 891.502] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event15)
    [ 891.502] (II) AutoAddDevices is off - not adding device.
    [ 891.502] (II) config/udev: Adding input device Lenovo EasyCamera (/dev/input/event16)
    [ 891.502] (II) AutoAddDevices is off - not adding device.
    [ 891.503] (II) config/udev: Adding input device Ideapad extra buttons (/dev/input/event10)
    [ 891.503] (II) AutoAddDevices is off - not adding device.
    [ 891.503] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event6)
    [ 891.503] (II) AutoAddDevices is off - not adding device.
    [ 891.503] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event17)
    [ 891.504] (II) AutoAddDevices is off - not adding device.
    [ 891.504] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse1)
    [ 891.504] (II) AutoAddDevices is off - not adding device.
    [ 891.504] (II) config/udev: Adding input device PC Speaker (/dev/input/event11)
    [ 891.504] (II) AutoAddDevices is off - not adding device.
    [ 892.695] (II) UnloadModule: "mouse"
    [ 892.720] (II) NVIDIA(GPU-0): Deleting GPU-0
    [ 892.723] (EE) Server terminated successfully (0). Closing log file.
    Last edited by Akikyo (2014-07-24 21:04:45)

    I can't be sure but most of the dota2 output looks "normal" to me (I get the same yet it works fine).
    eurotrucks is clearly crashing. You could try to force the resolution it uses in its config files?
    Or maybe it's missing a lib (you may need to install 32bit versions):
    ldd /path/to/eurotrucks
    to see if that's the case. If not, you might have to take it up with the eurotrucks developers.
    And you could try using fluxbox/openbox just to see what happens. A lot lighter than KDE.
    Have a good look though: https://wiki.archlinux.org/index.php/Steam
    and remember to check for missing 32bit libs.

  • Satellite C855D-S5302 problem with win8

    I recently bought new Satellite C855D-S5302 after retiring my 12 year old Satellite after excellent service. BUT this new one comes with Windows 8 installed and that is just not cutting it for me.
    Often when moving the cursor to the left, the charms screen pops up and the cursor goes nowhere until I click elsewhere. It has frozen several times so I had to restart by holding the power button down, and it doesn´t work as well with my Motorola Razr smartphone as the old XP did. I believe MS are trying to copy the Android OS but they do it terribly. Anyway, I have been searching for a way to downgrade my NEW computer to Windows 7 or something else, but haven´t found a way to do that. And according to Toshiba homepage, this model hasn´t been qualified to run Win8. So what should I do? Return the computer to the supplier? And tell everyone not to buy Toshiba? I´d rather not but I am running out of options.
    Is there an Operating system available from Android for this computer?
    Please help me.
    Oskar

    Windows 8 freeze and has software compatibility issues..... on c855d family machines. I have two of them both freeze lock up bought them at Walmart... Downgraded to Windows 7 pro had 5 devices having problems but after Microsoft update ran three long running updates some of them self resolved except for two of them SM bus controller and USB controller... To my confusion the driver seem to have loaded under device manager or installed default or generic drive for that device..... What need is drivers for those devices...Please help
    PS.. I AM not impressed with Windows 8 and dont like it hope window 9 is better
    Rickfla wrote:
    I bought same model end of Nov. You only have 14 days to return a Toshiba laptop for an exchange; after that, you have to send to them for repair. The hard drive died on mine after 4 weeks and it is now in Nashville for repair; not costing anything but is a pain. At least I have a win7 Toshiba as backup. I had no problems with the system--think win8 is fine; just takes getting used to.
    Rickfla wrote:
    I bought same model end of Nov. You only have 14 days to return a Toshiba laptop for an exchange; after that, you have to send to them for repair. The hard drive died on mine after 4 weeks and it is now in Nashville for repair; not costing anything but is a pain. At least I have a win7 Toshiba as backup. I had no problems with the system--think win8 is fine; just takes getting used to.
    thank you
    Window 7 pro 64 bit

  • Installation problems with Solaris 8 on Intel

    Howdy,
    I am having some problem with my installation of Solaris 8 on Intel. I am installing the system on a P133 (Asus TX97 motherboard). When I first start the installation and perform the system scan I get the following error:
    The PnP ISA: IDE Controller programable device was unable to be programmed.
    This could be caused by two possible reasons:
    - Lack of resouces available
    - There is a conflict with the following already-existing device: 8086,7111 - Bus Mastering IDE Controller
    When I bring up the View/Edit device settings and I scroll to the IDE controller there is an ! mark beside the PCI IDE controller. The controler is specifying: Bus 0, device: 1, function: 1 port 1F0-1F7, 3F6, 170-177, 376, E000-E00F, 0 IRQ 14, 15
    Does anyone have any suggestions on how to resolve this conflict? I tried removing the PCI IDE interface and then installing a ISA IDE interfact (for IRQ: 14, IRQ 15 automatically put a PnP IDE controller there). This seemed to resolve the conflict but then I received a: No Bootable devices have been found.
    If anyone can help out with how to resolve the conflict, or what the No Bootable Devices have been found error it would be greatly appreciated.
    Currently there is a partition set up with NT on it, but I wish to basically get rid of everything on the HD and install Solaris on it. FYI, when I check the HD's in NT it mentions I/0: 1F0-1F7 IRQ 14 and also I/O 170-177 IRQ 15.
    Any help would greatly be appreciated.
    Regards,
    S.

    When I close down Solais in the CDE I am taken back to the logon screen
    and I turn the PC off.Don't do that. If you simply turn off the PC, the OS has no chance to
    write back cached / modified disk data back to the HDD - this is also the
    reason why solaris has to check the filesystems on the next boot and apparently
    has to repair filesystem defects.
    What you have to do is shutdown the machine, before you can power it off.
    Login as user "root" and use the command
    init 5
    or
    halt
    "init 5" will shutdown system services, by executing commands from
    /etc/rc0.d/K* with argument "stop". Then it'll sync all modified disk blocks to
    the HDD, kills all remaining processes and unmounts all filesystems. In this
    state it's safe to power off the machine!
    "halt" is a quick-and-dirty shutdown. It does not stop system services (the
    /etc/rc0.d/K* commands are not run). But, it syncs all modified disk blocks
    to the HDD, kills all processes and unmounts all filesystems. "init 5" is preferred,
    especially if you have services like a database server running on the machine,
    which needs to be cleanly shutdown. On the other hand, with a default solaris
    installation and no extra services, a simple "halt" should be OK.
    Btw. if multiple users are logged in on the machine, you should also have a look
    at the shutdown(1M) command. "shutdown" sends warnings to the logged in
    users that the machine is about to be shut down, ...

  • PROBLEM with iMessage (Messages) on iPod touch HELPPP

    We had a problem with iMessage. We're both using iPod touch with iOS5 version.
    but we can't send messages. It says our emails/apple ids are not registered on iMessage.
    I checked it on already on the Settings>iMessage> ON .
    but still we cant use it. HELP PLEASE THANKS

    Same isue when tryn to change advanced setting :
    +Mon Jul 5 15:51:39 iPhone profiled[266] <Warning>: profiled|Service starting...+
    +Mon Jul 5 15:51:39 iPhone profiled[266] <Warning>: MC|Profile MCConfigurationProfile 0x113b30 has no friendly name.+
    +Mon Jul 5 15:51:41 iPhone ReportCrash[267] <Notice>: Formulating crash report for process profiled[266]+
    +Mon Jul 5 15:51:42 iPhone com.apple.launchd[1] (com.apple.managedconfiguration.profiled[266]) <Warning>: (com.apple.managedconfiguration.profiled) Job appears to have crashed: Bus error+
    +Mon Jul 5 15:51:42 iPhone ReportCrash[267] <Error>: Saved crashreport to /var/mobile/Library/Logs/CrashReporter/profiled2010-07-05-155139iPhone.plist using uid: 0 gid: 0, synthetic_euid: 501 egid: 0+
    Did you solved this issue ?
    Message was edited by: lbarbisan

  • Memory problems with my a215?

    Hi, for more than a year  i bought (unfortunately) an a215-4817, and since that day i am having anything else but problems. Now i am having problems with the memory i think. At first my laptop freezed, keyboard was not responding or came out those famous blue screens. In all cases i must shutdown the computer pressing down the power button for a few secs, after that when i tried to start it again didnt do anything, i could only hear the fan working, some disk reading noise but the screen was off and never went on and show me at least the toshiba logo.  The only way i had to fix this was first taking the battery out and pressing the power button for more than 10 secs. Later, i had to take both memory modules out besides the battery. At that moment i came to the windows event viewer and see some "WHEA-logger" warnings that talk about "TLB erros", "bus or interconection error" and ''Hierarchy memory error". Today the only way i can boot up my computer is using only one memory module placed on the first slot. That is the reason i am using it with only 1GB. I am really lost with this, run a lot memory tests ( microsoft Vista has one and Memtest+86 that comes in Ubuntu CD) and any of them trow me some error. 
    Might have broken the memory controller of slot 2?or maybe something with the dual channel controller? can be a problem with the bios? i have version 2.0, never gave me problem but could it be corrupt? I have tried to reinstall it but the installer hasnt the option to reinstall, where can i download the old version and install it again so i can reinstall de versiin 2.0?. And my last question is if somebody knows where to toshiba should i write to tell them how mad i am with them, this laptop was the worst thing i have ever bought, and their customer service in latin america (i am from argentina) is terrible.
    So if somebody have any idea of what the problem could be, i will be grateful. Sorry about my english.
    Thanks, and greetings from argentina! 
    Solved!
    Go to Solution.

    YOUR SPECS:AMD Turion™ 64 X2 Dual-Core Mobile Technology TL58• AMD M690VMemory4  • Configured with 2048MB DDR2 SDRAM 
    You have a really good unit mobo wise to utilize.  With those initial problems you should have taken it to an authorized service provider and have unit checked out. Be that as it may-why you took out the memory modules is beyond me, and yes it is feasible that damage to the board housing or module may have occurred.  Look at the module(s) and see if you observe cracks in the gold thread or board crack, especially where the split notch is. Suggest that you recheck the seating of the memory module until you hear a click noise. Check within the housing area for a small sinle cable and ensure if there it is connected.
     WHEA-Logger situation..... response is as follows.
    A corrected hardware error occurred.
    Error Source: Corrected Machine Check
    Error Type: Memory Hierarchy Error
    TLB = translation lookaside buffer, part of the MMU used to perform virtual mapping).  Machine check errors are hardware errors - this error is telling you that the CPU detected a hardware error but was able to correct it.  This is not a good sign - check temperatures and voltages.   Disabling windows reporting of machine check errors will simply ignore the problem - it will still exist! (and its highly likely that if you are getting correctable errors you are also getting uncorrectable errors sometimes).
    Too resolve: Locate the Recovery disc and reset to factory specs, with a backup of all items you wish to save before attempting.

  • No TV sound - Problem with Pulseaudio and Gnome

    Hi Community!
    Since January 2013 I got big problems with the sound of my tvcard. The card is a Sundtek Media TV Pro. But after all the problems have nothing to to with the card itself!
    So far I found out, that the problem is with Pulseaudio.
    - Sound works under Windows on same PC.
    - Sound don't work under Arch - not with tvtime, not with vlc, etc.
    - Problem occurs even on a new installed system with the Arch-2013-02-01 install medium.
    cat /etc/mediasrv.log
    [1033] Pulseaudio connect reported an error (6 - Connection refused)
    [1033] select error() in audio processor (can be caused because of pulseaudio) (Interrupted system call)
    After setting up a new Arch installation with just xorg-server, gnome, tvtime and the sundtek driver from AUR I run journalctl -b:
    Feb 10 16:25:15 hightower pulseaudio[636]: [pulseaudio] pid.c:
    Daemon already running.
    With sudo journalctl | grep 'Feb 10 16:2' I get the following output:
    Feb 10 16:25:01 hightower rtkit-daemon[489]: Successfully made thread 488 of process 488 (/usr/bin/pulseaudio) owned by '120' high priority at nice level -11.
    Feb 10 16:25:14 hightower rtkit-daemon[489]: Successfully made thread 606 of process 606 (/usr/bin/pulseaudio) owned by '1000' high priority at nice level -11.
    Feb 10 16:25:15 hightower rtkit-daemon[489]: Successfully made thread 636 of process 636 (/usr/bin/pulseaudio) owned by '1000' high priority at nice level -11.
    Feb 10 16:25:15 hightower pulseaudio[636]: [pulseaudio] pid.c: Daemon already running.
    Feb 10 16:28:55 hightower pulseaudio[1000]: [pulseaudio] module-jackdbus-detect.c: Unable to contact D-Bus session bus: org.freedesktop.DBus.Error.NotSupported: Unable to autolaunch a dbus-daemon without a $DISPLAY for X11
    Feb 10 16:28:55 hightower pulseaudio[1000]: [pulseaudio] module.c: Failed to load module "module-jackdbus-detect" (argument:""): initialization failed.
    Feb 10 16:28:55 hightower pulseaudio[1000]: [pulseaudio] socket-server.c: bind(): Die Adresse wird bereits verwendet
    Feb 10 16:28:55 hightower pulseaudio[1000]: [pulseaudio] module.c: Failed to load module "module-esound-protocol-unix" (argument: ""): initialization failed.
    Feb 10 16:28:55 hightower pulseaudio[1000]: [pulseaudio] main.c: Module load failed.
    Feb 10 16:28:55 hightower pulseaudio[1000]: [pulseaudio] main.c: Module load failed.
    Feb 10 16:28:55 hightower pulseaudio[1000]: [pulseaudio] main.c: Konnte Daemon nicht initialisieren.
    Feb 10 16:28:55 hightower pulseaudio[997]: [pulseaudio] main.c: Start des Daemons fehlgeschlagen.
    So, if I understand right, pulseaudio is alreade started by the rtkit-daemon and gnome couldn't start it again.
    At https://bugs.archlinux.org/task/30926 I found a hint concerning /etc/xdg/autostart/pulseaudio.desktop and /etc/xdg/autostart/pulseaudio-kde.desktop.
    After removing them from /etc/xdg/autostart and running journalctl -b there are no more errors.
    With sudo journalctl | grep 'pulseaudio' I get:
    sudo journalctl | grep 'Feb 10 17:4' | grep 'pulse*'
    Feb 10 17:41:42 hightower rtkit-daemon[485]: Successfully made thread 484 of process 484 (/usr/bin/pulseaudio) owned by '120' high priority at nice level -11.
    Feb 10 17:41:55 hightower rtkit-daemon[485]: Successfully made thread 625 of process 625 (/usr/bin/pulseaudio) owned by '1000' high priority at nice level -11.
    In my opinion all looks ok! I also checked the channels with the alsamixer and it looks good, too.
    So I ran vlc v4l2://:dev=/dev/video0:width=720:height=576:tuner-frequency=510750:adev=/dev/null:standard=255 - but still no sound.
    With cat /var/log/mediasrv.log I checked the drivers logfile:
    2013-02-10 17:48:55 [343] SETTING DVB-C
    2013-02-10 17:48:55 [343] switching to analog TV
    2013-02-10 17:48:56 [343] SETTING PAL/SECAM
    2013-02-10 17:48:58 [343] invalid audio input selected: 2
    2013-02-10 17:48:58 [343] Setting frequency: 510750000
    2013-02-10 17:48:58 [343] Using settings for Europe
    2013-02-10 17:48:58 [343] Set Pixelformat: 0 YUV 4:2:2 (YUYV)
    2013-02-10 17:48:58 [1033] Starting audio processor (PID 1033)
    2013-02-10 17:48:58 [1033] initializing audio in audio processor
    2013-02-10 17:48:58 [1033] loaded local pulseaudio driver
    2013-02-10 17:48:58 [1033] select error() in audio processor (can be caused because of pulseaudio) (Interrupted system call)
    2013-02-10 17:48:59 [1033] Pulseaudio connect reported an error (6 - Connection refused)
    2013-02-10 17:48:59 [1033] select error() in audio processor (can be caused because of pulseaudio) (Interrupted system call)
    2013-02-10 17:48:59 [1033] Pulseaudio connect reported an error (6 - Connection refused)
    I started tvtime again. This time I ran rm -rf ~/.config/pulse/ and killall pulseaudio to kill the Pulseaudio server. I instantly got a loud noise out of my speakers.
    I closed tvtime and re-opened it. And there it was: TV SOUND OUT OF MY SPEAKERS!
    But now, when I run pavucontrol I get:
    Connection to PulseAudio failed. Automatic retry in 5s.
    In this cas this is likely because PULSE_SERVER in the Environment/X11 root Windows Properties or default-server in client.conf is misconfigured.
    This situation can also arrise when PulseAudio crashed and left stale details in the X11 Root Windows.
    If this is the case, then PuseAudio should autospawn again, or if this is not configured you sould run start-pulseaudio-x11 manually.
    I got the information from Sundtek, that Pulseaudio should not be started as system service. Instead, every user should have an own Pulseaudio daemon and that PA was concepted this way. But they don't know how it is implemented in ArchLinux.
    I also don't know it exactly. So the question to all you ArchLinu pro's:
    How is PA implemented in Arch? And how can I sustainable solve my problem?
    Thank you for your time and help!
    Durag

    There is just one more thing I found out.
    After logging into Gnome and running ps aux | grep pulse I get:
    rebel 727 0.7 0.2 444316 10288 ? S<l 03:02 0:00 /usr/bin/pulseaudio --start --log-target=syslog
    rebel 731 0.0 0.0 71236 2652 ? S 03:02 0:00 /usr/lib/pulse/gconf-helper
    rebel 843 0.0 0.0 17396 1184 pts/0 D+ 03:03 0:00 grep pulse
    To get the sound to work I run:
    rm -rf .config/pulse/
    killall pulseaudio
    killall -9 pulseaudio
    I again run ps aux | grep pulse
    rebel 4016 4.2 0.2 510124 11528 ? Sl 03:06 0:02 /usr/bin/pulseaudio --start --log-target=syslog
    rebel 4020 0.0 0.0 71368 2700 ? S 03:06 0:00 /usr/lib/pulse/gconf-helper
    rebel 4046 0.0 0.0 19456 1216 pts/0 R+ 03:07 0:00 grep pulse
    I can recognize that the STATs have changed. Maybe this can help to solve the problem?

  • Problem with NIC and Firewire on MSI 865PE NEO2-PFISR

    Hi, I have lots of trouble getting the network adapter on the MSI 865PE NEO2-PFISR to work.
    The NIC's LED indicators doesnt even light up when I plug in a network cable,
    and in windows (win 2003 server) it doesnt find the adapter at all.
    The NIC is displayed in the bios, and I have the option to disable it,
    but it is enabled.
    I have even reinstalled windows 2003 server to try to get the NIC to work.
    I have upgraded the bios to v3.8 via live update, with no problems, although the
    firewire-option on the same page in the bios is still gone, it doesnt detect the
    firewire at all(!).
    I have also tried several other NIC's (a 3COM 3C905B TX and a 3C905B TX XL
    PCI adapter). The 3C905B TX worked fine for a while, and then it started saying in
    windows that a network cable was unplugged, and began to try 10mbit, 100mbit
    lots of retries, now it doesnt work at all.
    I swapped tp-cables and changed the ports on the network switch (which there is
    also other computers attached to which doesnt have any problems) and that didnt
    made any difference.
    It seems that the whole pci bus is long gone, and maybe the onboard NIC is
    attached to this same pci bus?
    Strange also about the firewire-controller which isnt detected anymore.
    The USB devices work, and even a 3com usb wlan adapter works well.
    I have tried to reset the bios several times without that making a difference.
    Anybody have a clue to point out here?
    Cheers!

    Quote
    Originally posted by Raven
    you could try and flash to an older bios
    I tried most anything on flashing bios, both to a lower and a higher version.
    I returned the motherboard to the reseller and got a new motherboard as a replacement. This doesnt have all the same problems. At first it didnt post at all, indicating to red lights on the diagnosis.
    Then I was so pissed I hadnt touched the computer in a week, and just tried to use it a few days ago, and it seemed to work all ok. I used it for a few hours, and then it locked up.
    When I powered it up again, the lights on the integrated adapter was out. At first it seemed to work to take the agp card a little out of its slot, as if it was unaligned or something. Used it for a few more hours.
    Then I plugged in the sound cables (5.1 sound with 3 cables), and with the last cable, the network darkened out AGAIN!!
    In the bios it still indicates that the network is enabled, firewire is enabled etc.
    I twisted the network cable, and for a few microseconds I get a orange light, not the usual green light. Now this has stopped too.
    I see other also have problems with these symptoms so I guess I've got another black monday card.
    I will return this card too, and ask the reseller to get a card of another brand.

Maybe you are looking for

  • Signed Applet JTextField copy to system clipboard

    Hi all, We have a signed and deployed our JAR file that contains our applet following the instructions listed at: http://java.sun.com/products/plugin/1.3/docs/rsa_signing.html We used Thwate as our CA. All seemed good. However any JTextFields that ar

  • What drivers do I need to reinstall different OS and where can I download them for ThinkPads T61?

    I just accidentally purchased one ThinkPads T61 with Linux OS version.  I don't use Linux so I plan to wipe out Linux and install Windows XP Pro instead.  I have the Windows OS, but as I know I will need to install some drivers afterward to make the

  • Using Windows Media Player to burn CDs

    I use Acoustica to create music files from my audio tapes. Then I burn these files to a CD. Sometimes the files will be listed with the file time, and sometimes without. When there is no time, Media Player says it can't burn that file because it can'

  • How can I customize a number format?

    In the previous numbers release (Numbers 9) there was a menu were you were able to customize a number format similar to what you can do with Excel. Have they drop this functionality in the new release?

  • Planning to expose additional APIs... Which ones should be top priority?

    Hi everyone, We are working on the plans for the next APIs to be exposed for Open Platform, and would like to get your feedback on you will like to see next in terms of APIs. Based on what we heard so far, our priority list for APIs looks like: Page