Problems with D-Link DI-604 router

I have two PCs in my LAN. They both are connected to a router.
One PC is running Slackware 10.2 while another is running Arch 7.1 pre1.
When I was using Azureus on Slackware one, it caused no problems.
Then I have transfered my ~/.Azureus folder to Arch and changed router`s settings to forward port to my another PC. (Advanced > Virtual Server > 192.168.0.110 Both 6827 / 6827 always).
After like a minute or so my router stops responding or slows down alot.
When I look at logs I see "Unrecognized attempt blocked from xxx.xxx.xxx.xxx:15485 to my.ip.yyy.yyy UDP:6827".
How come?

So i have removed my port forwarding rule, enabled UPnP, azureus stopped giving me errors and stuff, everything would be just fine, but:
- I can only download torrents, uploading is always at 0 B/s.
- Router is still slow as hell when running azureus.
Also, nmap localhost and nmap my_real_ip shows zero open ports, shouldn`t at least azureus port be open?

Similar Messages

  • Computer tend to freeze when accessing internet with D-Link dir-655 router

    I recently bought a D-Link dir-655 router and since then my computer tend to freeze up completely when accessing internet. This also happens when certain programs access internet. Otherwise I am usually using Internet Explorer or Opera.
    I've found that there are many who experience problems with D-Link router, that they may have problems with certain network card. Anyone who can say if this is a known issues and if it there is a solution or if it is better to buy another router?
    Model #: HPE-140sc
    Product #: WC779AA-UUW
    Software-version#: A1PNv6PrA2 
    PCBRAND: Pavilion

    Hi, Ernst:
    Would you consider backing up your files and doing a system recovery?
    Maybe the OS has some corrupt registry files or something.
    If you recover and then it still does that, your only choice looking at the motherboard is a PCIe gigabit ethernet adapter which would be relatively easy to install, or you could even get a USB ethernet adapter and not even have to open the case.
    See if there is a setting to disable the onboard NIC if you have to add a network card.
    I would rule out all software problems before buying hardware.
    If you want to try some other malware program, I recommend the free Kapersky rescue disk. You burn the file to a CD and boot from it.  It scans the drive and deletes any malware or virus files it finds without the PC being in windows. A lot of times viruses and malware can't be removed when windows is running.
    Link to the download and instuctions for use is below. I like to use the graphic interface rather than the text interface.
    http://support.kaspersky.com/faq/?qid=208282173
    Paul

  • Problems with a WRT54G wireless linksys router.

    Hello, I'm having problems with my WRT54G linksys wireless router.
    With this router, I tend to get lag spikes and often disconnect while playing online games at a certain time. The spikes usually get worse
    during the afternoon/evenings (2pm-12am PST). 
    Some information about my setup:
    Firmware version: v.8.00.7
    Shaw high speed cable (i think ~10mbit connect)
    xp/vista OS (two computers linked up via router)
      - Both computers are connected via wire, not wireless
    I've changed settings for my router through advice, but nothing seems to work. Nobody else is connected to my router because I get nothing
    in the logs and the DHCP client list has only 2 IPs. I'm sure my router is the one giving me lag spikes because I sometimes connect my
    modem directly to my computer (the XP) and receive no lag spikes. Someone does use wireless, but I turn wireless off at times so that
    isn't the problem. I've also secured my wireless, so I know it isn't the problem.
    Anyone know what's causing these lag spikes and how I can fix it? Do I need a new router?
    If anymore information is needed, please do not hesitate to ask.
    Message Edited by Dysouk on 10-17-2009 12:24 AM
    Not so computer savvy

    Try to readjust the wireless settings of the router...Open the linksys setup page and try the following settings...
    - Reduce the MTU size to 1364.
    - Change the Wireless Channel to 11-2.467GHz.
    - Under Advanced Wireless Settings,Change the Beacon Interval to 75,Fragmentation Threshold to 2304,RTS Threshold to 2304
    Now,check the difference...If you are still facing the same problem then,try to upgrade/reflash the router's firmware,reset the router and reconfigure it from the scratch.

  • Problems with Dinamic Link between Premiere pro CC and After Effects CC

    I'm having serious problems with dinamic link between premiere pro and after effects, really serious problems that have 2 big projects in trouble (a documentary and a video clip) and I had to redo all the work pipeline to the consumer.
    The documentary for a spanish TV was made on CC 2014 and a video clip was made on CC. Both of them with a lot of after effects composition in the premiere pro timeline. Render freeze, a lot of playback issues, and many more problems... Until I decided to remove these links between premiere and after effects and render out all the after effects compositions one by one and insert as clips in premiere pro. 1 week working away with back and fourth.
    I've got a huge workstation:
    i7 4990
    32Gb ram
    GTX780 3gb
    256 gb system ssd
    2 Tb project storage
    *All my hardware and software are update.
    I know that a lot of folks are on the same huge problem and I want to ask everyone:
    How do you save this?
    What is your pipeline?
    Are there any solution?
    Best practice to use dinamic link in a huge project?
    Thanks,
    Ruben Gimenez.
    R&D iceblink.es
    www.rambot.es

    Thank You, Jim -
    Unfortunately that specifically did not work.
    Based on another comment sent to me, here is what did.
    In PProCC
    File > Adobe Dynamic Link > New After Effects Composition
    In AECC
    From that composition created from PPro, I imported the project (aep) initially created in AECC from another team member. Saved the file.
    Back in PProCC
    File > Adobe Dynamic Link > Import After Effects Composition
    Magic.

  • Hi guys. i have some problem with a link from a pdf on-line,when i click on it,the page adds a "%" at the and of the link and says "page not found" because of it

    Hi guys. i have some problem with a link from a pdf on-line,when i click on it,the page adds a "%" at the and of the link and says "page not found" because of it.
    This happens only when a load my pdf file on my server, because if i click on the link when the file is on my iPad, the page opens without problem.
    Any help please?
    thanx

    the % sign is often used when there's a space in a name. HTML doesn't like spaces so it fills them with % or %20
    try, on the end of that link, see if there's a space built into the page or the link when the page was made
    On the web address you may be able to 'backspace' at the end and erase that space to get the address, but whomever made the page possibly put a mistake in the link

  • HT204409 I am trying to log onto my wireless connection but it keeps telling me I'm unable to locate any wireless network.  I know there are several networks nearby. Is this a problem with my phone or my router?

    I am trying to log onto my wireless connection but it keeps telling me I'm unable to locate any wireless network.  I know there are several networks nearby. Is this a problem with my phone or my router?

    I found a solution that has worked on both iPhone 4's I have that have had the same issues, and also including not being able to download updates in the App store.
    Go to Settings > WiFi and turn it OFF.
    Next go to General > Cellular > Cellular Data and turn it OFF
    Next go back to Settings > WiFi and turn it ON, (wait a few seconds for it to sync with your network)
    Finally go back to General > Cellular > Cellular Data and turn it ON.
    I had the same issues on both my wife's phone, and my own, and it fixed it immediately without changing any proxy settings or reboots, (which I did try on my phone and did not work, but did not try on my wife's phone)
    Hope this helps!

  • Problem with Help Link in search result screen of PCUI

    Hi,
      I am trying to access the pcui applications that came out of box with crm using BAB,everthing is working fine but got a problem with "Help" link in top right (beside personalize link) the search result area of all the PCUI screens.
    when i click on that i get "page cannot be displayed" error, seems that it is pointing to some wrong URL, where should i change the url to point to our company's help site for that link..
    clicking on the properties of that link shows that it is pointing to
    javascript:CATshowF1(%20'/sap/bc/bsp/sap/crm_bsp_f1_help/f1help.do?doctype=kw&loio=70B4ED8E03595645A6ABA33B4576BB57&class=IWB_EXTHLP&language=E' );
    Please help me in this regard.
    Thank you

    My response help resolve Kodru's Message which he also posted in EP Implementation Forum. He resolved it by changing the variant noted below.
    The link http://help.sap.com/saphelp_crm40/helpdata/EN/70/B4ED8E03595645A6ABA33B4576BB57/content.htm should display Activity Info.
    First I would check if the crm_bsp_f1_help service has been activated in SICF.
    Secondly I would check the settings in the IMG -> SAP WAS -> Know. Mgt. -> Settings in App. Sys. -> Usage of Help Type "Dynamic Help". The Tab PlainHtmlHttp should have a variant called CRM_HELP, Server Name (help.sap.com) and path.

  • After Effects won't close/Problems with dynamic links

    When I quit After Effects the icon still shows up and it says that it is still open, even force quit will not work. Also having problems with dynamically linked files between after effects and Premiere pro. Rendering in Premiere doesn't work unless I go to AE, save the project, then go back to Premiere. I have OSX Mavericks 10.9.2, a late 2012 mac pro, and AE CC 12.2.1.5

    Kevin: would appreciate further thoughts on this.
    I am using Pr2014, version 8.0.0 I am using AE2014, version 13.0.2.3. When I was on earlier versions of each, I had no problem importing AE comps into Pr. I'd choose import in Pr, then select the AE project, then select the comp. But with my new and improved versions of AE and Pr, I keep getting "importer reported a generic error."
    I also tried to go the other way. I selected in Pr the clips I wanted to work on in AE, and then tried "replace with AE comp" but got the "generic error" message again..
    Finally, I attempted to create a Dynamic Link from Pr via the File menu, but with each of the options from there, I got "failed to connect to AE Dynamic Link"
    Any advice you can share, would be most welcome.

  • Strange problem with Database LInk

    Hi Everyone,
    I have strange problem with Database Link in Oracle 11g Express Edition;
    There are two computers: computer-server and computer-client. Tnsnames.ora are the same on both computers ie.
    CT =
    (DESCRIPTION =
    (ADDRESS_LIST =
    (ADDRESS = (PROTOCOL = TCP)(HOST = krzysztof)(PORT = 1521))
    (CONNECT_DATA = (SERVICE_NAME = XE)
    I created database link :
    Create database link zdalny
    Connect to <user_id> identified by <password>
    using ‘CT’;
    Client can’t connect with server when I am using above command. But when I change “using” for using ‘krzysztof:1521’ or using ‘krzysztof’ or using ‘server IP:1521’ – everything is ok.
    Why I am asking. Because in all materials which I am reading about Oracle command with using ‘CT’ should be working correct. But there is not. Do you know, why?
    Thanks in advance and apologize for my English.
    Rgds
    Krzysztof

    Krzysztof Szymaniak wrote:
    Thanks for all replies.
    Below is server's tnsnames.ora
    CT =
    (DESCRIPTION =
    (ADDRESS = (PROTOCOL = TCP)(HOST = krzysztof)(PORT = 1521))
    (CONNECT_DATA =
    (SERVER = DEDICATED)
    (SERVICE_NAME = XE)
    EXTPROC_CONNECTION_DATA =
    (DESCRIPTION =
    (ADDRESS_LIST =
    (ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1))
    (CONNECT_DATA =
    (SID = PLSExtProc)
    (PRESENTATION = RO)
    ORACLR_CONNECTION_DATA =
    (DESCRIPTION =
    (ADDRESS_LIST =
    (ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1))
    (CONNECT_DATA =
    (SID = CLRExtProc)
    (PRESENTATION = RO)
    SQL Error: ORA-12154: TNS:could not resolve the connect identifier specified
    12154. 00000 - "TNS:could not resolve the connect identifier specifie
    Rgds
    Krzysztof
    PS. I tried with using 'XE' - not working.Assuming that is the correct tnsnames, of course XE is not working. You don't have a tnsnames entry for 'XE'.
    You need to be aware that when using a dblink, the client is the db in which the link is defined, not the desktop from which you connect to that database.
    I think you need to start here:
    http://edstevensdba.wordpress.com/2011/02/26/ora-12154tns-03505/
    http://edstevensdba.wordpress.com/2011/02/09/sqlnet_overview/ (Help! I can’t connect to my database )
    http://edstevensdba.wordpress.com/2011/02/16/sqlnet_client_cfg/ (Help! I can’t connect to my database (part duex) )
    The fact that your client (db link) is a database doesn't change anything taught in the above.

  • Problems with graphics [link removed]

    Hi everyone.
    I have problems with graphics [link removed] - Ogłoszenia Hrubieszów. Darmowe ogłoszenia Hrubieszów i okolice. If you want to help, please [link removed] help me in diagnosis. THX !

    Explain what exactly the problem is rather than spamming the forum with links. The page looks just fine in Firefox and Chrome.
    Mylenium

  • Macbook Pro Problems with D-Link Router

    My router D-link (Dl-624+A, model available in Asia) 802.11g/2.4 Ghz wireless router serves a G5 iMac, a G4 Aluminum Powerbook plus a Windows laptop and desktop. We have never experienced any problems with the network.
    I have recently bought a 17" Macbook Pro 2.4 Ghz laptop (intel MBP) and have not been able, in any combination of modes, to join the network. A dialogue box simply says that there was an error trying to join the network.
    I have no problems joining other wireless networks around town its so easy, just the one at home is the problem.
    What is going on? Is there a fix? Thanks

    Hi, my MacBook Pro can't connect to my D-Link DSL-G604T router via wireless too.
    Airport can see my wireless connection and asks for the WEP password to connect. I put the password key in and an error pops up saying it cannot connect. I can connect via an Ethernet cable. Also, my previous system PowerBook G4 is able to connect via to the router via wireless, hence there is nothing wrong with my network.
    Based on the suggestions from other threads, I tried to set my security to WPA instead of WEP. However, after I set my security to WPA, and tried to connect to my wireless network, the AirPort popup only gives me 4 options for the Wireless Security:
    WEP Password
    WEP 40/128-bit hex
    WEP 40/128-bit ASCII
    LEAP
    There isn't an option to use WPA. Can anyone advise?

  • Communications problem with radio link

    A customer has a network composed from a LAN shared-media (with hub 8-ports), a router linked to three modems wich link to three 9.6 kbps radio links. These radio links have linked to another three modems and PC remotes. The problem is that in LAN side, we communicate with only one remote PC, and the other two remote PC can't do it. What could be the source of the problem? Maybe CSMA/CD?
    Thanks for the help.
    Filippo Ceruti

    Hi,
    r these three pc's are in the same subnet... or did u done any routing in the router...... Just chk whether u r getting atleast the mac-entries of those PC in router......
    rgs

  • IP / DHCP Problems with D-Link Extreme

    I have been having a lot of problems with my current set up.. D-Link router/modem -> Airport Extreme >WDS> Express. The D-Link router has the "DHCP Range" of Start: 192.168.1.2 End: 192.168.254 and Lease time of 24 hours. The Airport extreme has the IP Address of 169.254.255.1 and Connection Sharing set to Off (Bridge Mode). The Airport Extreme keeps telling me it does not have a valid IP address and my MBP is connected to the AEBS is saying Airport has a self-assigned IP address and may not be able to connect to the internet. I have no idea of what settings to change it to. Help please.

    Most likely there is a bad connection between the D-Link router and the Base Station, accounting for the inability of the Base Station to communicate with the D-Link router and thus obtaining an IP address.
    Does the status light on the D-Link router port to which the Airport Base Station is cabled show a valid and active connection? If not, try a different ethernet cable for connecting the two devices and/or try plugging the Base Station into a different port on the D-Link router.

  • IChat video conferencing problems with D-Link WBR-1310

    Howdy,
    I am having a few problems with iChat video conferencing. I use the D-Link WBR-1310 wireless router and a MacBook. My girlfriend has a MacBook Pro at her school which she connects to via ethernet. I connect to my router via wireless. The routher is connected to a DSL modem. iChat video conferencing tends to work sometimes but very rarely. I have DMZ on the router turned on as i read somewhere on these forums that it was recommended. I also have the Apple firewall turned off so my laptop is pretty much naked as far as security is concerned. Three other computers use the network One desktop PC connected directly into the router and two Apple iBooks which are connected via the wireless. The problem is that i keep getting error message -8. Can anyone please help?
    Thanks in Advance

    I'd start by verifying you have the most recent firmware installed on your router.
    Next, start off by trying to test to a user that has no known issues: http://www.ralphjohnsuk.dsl.pipex.com/ContactTesters.html (Bottom of the page)
    That will help pinpoint where the connection issue lies.
    Once you can succefully connected, then you should set up a static ip address on your mac and port forward the necessary ports in your router. If you router supports UPnP, I'd try enabling the first.
    I hope this helps!

  • Airport Express with D-link 624+ wireless router.

    Have got a D-link wireless router connected. Wireless internet works fine on its own, but I cannot connect the apple airport express to the wireless internet, so I have to keep switching connections and am unable to use the internet at the same time as streming music to my stereo....what am I doing wrong?
    please help me. I thought I knew computer gear, but was SOOOO wrong.

    I had a DL 624+ (and have since abandoned it). I had a lot of instability problems with it, which seemed to be related to the Dlink DHCP implementation. I was watching the log on the router, and I was seeing the dlink constantly re-issuing DHCP addresses to the macs on the network - it would renew the addresses twice a minute.
    I had seen some posts which suggested that there were problems with either long DHPC client names, or client names which had non-alphanumeric characters in them. (Note if your machine name has spaces, this could happen.)
    So, you might want to try:
    -Assigning static IP addresses and see if the problem goes away
    -checking your DHCP client names to make sure they are between 8-12 characters
    Hope this helps!

Maybe you are looking for