Problems with device manager tacacs authentication

We've recently upgraded our Device Manager to 4.1(3a) and have a mix of switches running this version as well as older versions (3.3(3)). We use AAA tacacs+ on the switches to a Cisco ACS server for user authentication. The ACS server backends out to our Windows Domain authentication service. Typically usernames are formatted as follows: domain\username
This has worked fine for a long time, however now DM 4.1(3a) can't authenticate a user on a 3.3(3) switch. Various debugs and logs on the ACS point to problems handling the \ character in the username. A single \ gets "eaten" by either DM or the switch(don't know which) and the ACS sees a login attempt from domainusername, which of course fails. A \\ doesn't work either, in this case both \ characters are passed through to the ACS which now see a login attempt from domain\\username which also fails.
Looked at all the release notes, CCO bug searches, google and previous forum articles and found nothing on this.
Any help would be appreciated.
thanks,
Peter

Hi Dexios and welcome to the forums!
Here is the knowledgebase article on desktop/Bluettoth connection:
http://www.blackberry.com/btsc/search.do?cmd=displayKC&docType=kc&externalId=KB04132&sliceId=SAL_Pub...
Thanks,
Please remember to resolve your thread. Put the check mark in the green box that contained your answer! Thanks
Click Accept as Solution for posts that have solved your issue(s)!
Be sure to click Like! for those who have helped you.
Install BlackBerry Protect it's a free application designed to help find your lost BlackBerry smartphone, and keep the information on it secure.

Similar Messages

Problem With Device Management in Campus Manager

hi , there are 474 devices in common services device managemant which I grouped them to userdefinedgroups .
then I applied the auto allocation mode in Campus manager to apply all managed devices , when I click apply it mentioned that it would add 474 devices . but after data collection was finished just 461 devices was added and the rest of those are now in the Include devices under device management !!!
why does it hapened ?
thank you .

Hi Marian,
Could you please provide me with details on how to setup test workbench reporting. I have a BW system external to Solution Manager. I have setup the RFC conncections and all is okay. I have also setup the source system in BW and installed the web templates. However, when activating the content via solman_workcenter - test management - settings, I get the following error:
Content Activation Log
Log for Setup ID 20100819135323
20100819 135323[ERROR ]: Current Status: ERROR
20100819 135323[INFO ]: Job CCMS_BI_SETUP successfully scheduled
20100819 135323[ERROR ]: Incorrect system setting: standard transport is active
20100819 135323[ERROR ]: Change system settings or set user parameters RSOISCONTENTSYSTEM and RSOSTANDARDCTOACTIVE
20100819 135323[ERROR ]: Prerequisites check failed
20100819 135323[ERROR ]: Jobname/count: CCMS_BI_SETUP 13532300
I am sure there is something wrong in my setup but I cannot figure out what it is. A step by step help on how to do it will be greatly appreciated.
Regards,
Rue.

I am using Iphone 4S, Problem is my PC is not detecting iphone as a storage device, i tried with device manager, tried to install drivers but its showing drivers allready installed, Pls can any one help

I am using Iphone 4S, Problem is my PC is not detecting iphone as a storage device, i tried with device manager, tried to install drivers but its showing drivers allready installed, Pls can any one help

try this and see if it works: connect your iPhone and open up iTunes on your PC. Go to your phone's page. Under Summary page, check manually manage music and videos.

I'm having a problem with device capture

I'm having a problem with device capture. I connect my Sony HC-90 via firewire. I can start the capture process in Premier 4 but then all control freezes.
Any ideas?
Thanks,
Jeff

Are they custom EQ settings in iTunes on the computer?
Per:
https://discussions.apple.com/message/17383922#17383922
"Do the EQ settings from my iTunes library transfer to my iPhone when I sync it"
Yes.
" thus causing my iPhone to over process the data when I turn it's EQ on? "
No. If the EQ ison, the iPhone will use the EQ setting you assigned in iTunes. It will use only the preset EQ. If you have a custom setting or do not have an EQ setting, it will not be used and will use the setting on the iPhone.

Logon problem with oracle management server

I have problem with Oracle Management Server when I connect to the OMS message comes
The exception (java.lang.NullPointerException) occurred.
if any body have any idea pls tell us

Hi,
Oracle has changed the Enterprise Manager from version 1.5 to 2.0 .
With the new Oracle8i dataase server another service has been added.
If you want to user the OEM you have to install The Managment Server.
The Managment server has its own user and privileges and is recommended when using OEM.

Problem with discovering Managed Servers

Hi,
I got problem with discovering managed servers, when I restart only administration
server while managed servers are running. During restart of admin server everything
seems to be ok (the directive: Starting discovery of managed server... appears
on the screen).
However when I start admin console through http, I cannot monitor performance,
browse logs etc. I can only shutdown managed server and I can see in a server
tag that particular managed servers are running.
I'm looking forward for any clues
Michal

Sorry,
i cannot stop those managed server - in Control tab I have active only option
to start those server but they are running. In logging tab when I want to browse
the log the message that probably this server is not running appear. However in
the tab when all servers are listened there is a message that they are running
"Michal" <[email protected]> wrote:
>
Hi,
I got problem with discovering managed servers, when I restart only administration
server while managed servers are running. During restart of admin server
everything
seems to be ok (the directive: Starting discovery of managed server...
appears
on the screen).
However when I start admin console through http, I cannot monitor performance,
browse logs etc. I can only shutdown managed server and I can see in
a server
tag that particular managed servers are running.
I'm looking forward for any clues
Michal

I have a problem with session manager session files because of the invalid json storage data submited by firefox

Hi, i have problem with session manager's session files. The problem is: the submitted storage data from firefox which is put between "storage":{ and its matching closing brace } But in some of my session files there is non equal { and } under storage's braces. I need to get storage data but in my case it is very hard to do. My question is there any char put before or after { and } like /{ or \{ to avoid confusion? If there is not such thing, i think there could be different solution but i am not sure: i look couple of my session files; after "storage":{...} there is ,_"formDataSaved" so i can get storage data in this example ... by looking between "storage":{ and ,"_formDataSaved" easily. Is there every time ,"_formDataSaved" after "storage":{ ? Thank you.

Well, it seems waiting is not my strong suit..! I renamed a javascript file called recovery to sessionstore. This file was in the folder sessionstore-backups I had copied from mozilla 3 days ago, when my tabs were still in place. I replaced the sessionstore in mozilla's default folder with the renamed file and then started mozilla. And the tabs reappeared as they were 3 days ago!
So there goes the tab problem. But again when I started mozilla the window saying "a script has stopped responding" appeared, this time the script being: chrome//browser/contenttabbrowser.xml2542
If someone knows how to fix this and make firefox launch normally, please reply! Thank you

Phantom device problem with Power Manager in Win7, look at the pics

Hi All,
I found a phantom "Powered Off" device in My Computer, see the following picture:
http://img23.imageshack.us/img23/8097/mycomputeru.png
It's probably related to the Power Manager (version 3.11a), because when i right-click on the device, i see the Launch Power Manager option:
http://img691.imageshack.us/img691/7779/poweredoffproperties.png
Clicking Power on or Eject does nothing.
There are no devices missing in the Device Manager, and everything is powered and running.
No errors or warnings in Event logs. No issues with Windows at all.
Restarting Windows makes this dissapear.
Any clues on what's this device?
X200T 7449-EKU, Windows 7 Ultimate 64-bit.
Note from Moderator: Image(s) >50k converted to link(s).

Aim better?
W520: i7-2720QM, Q2000M at 1080/688/1376, 21GB RAM, 500GB + 750GB HDD, FHD screen
X61T: L7500, 3GB RAM, 500GB HDD, XGA screen, Ultrabase
Y3P: 5Y70, 8GB RAM, 256GB SSD, QHD+ screen

Problem with Path Managed property in alternate zones - also we have identified problem with Product catalog in alt zones

Hi All,
I'll start "one step back". Note we have resolved this issue but it is worth mentioning:
Yesterday we set up the product catalog. We were having a lot of inexplicable problems with it initially. After much troubleshooting, we found that it was because we were browsing the SharePoint site via the "Internet Zone" rather than the "Default
Zone" when we "Connected" our site to the product catalog. Issues experienced:
1) "Catalog Item URL Format" displayed error "Properties <Managed Property> specified by the shared catalog could not be found in the search schema" when attempting to connect to the catalog, despite that managed property being
configured correctly. The catalog would connect despite the error, and the navigation worked fine.
2) The search Result Source for the catalog would not return any results. Configuring the query and selecting "Advanced Mode" would show SPSiteURL:http://externalURL.domain.com. Changing SPSiteURL manually to
http://InternalURL resulted in results being returned as expected.
After much troubleshooting, we found that if were browsing SharePoint using the default zone (http://InternalURL) when we connected the Product Catalog, the result source then worked properly (internally and externally).
Ok, so now onto our current problem:
The Product Catalog appeared to be working properly (internally and externally) after figuring out that we needed to connect it from the Default Zone. However, we have found a remaining glitch, which doesn't appear to be Product-Catalog-specific. Consider
the following scenario:
1) We click a category in our Product Catalog, such as Electronics
2) A list of our electronic devices are presented via the "Category" display page
3) If we click on a specific item, a different URL is returned internally vs externally. We only get the friendly managed navigation URL when browsing via the Default zone. And of course totally different pages load based on which URL you get.
Internal (when browsing via Default zone):
http://InternalURL/catalog/PRODUCT-CATEGORY/PRODUCT-NAME
External (when browsing via Internet zone):
http://ExternalURL.domain.com/catalog/Lists/Products/DispForm.aspx?ID=1
We have reviewed the display template, and the "Path" managed property is simply being used to render the link. Furthermore, we have configured the Content Search web part's "Property Mappings" to show the "Path" MP, and it
displays the same (wrong) result externally.
This tells us that the Path MP is not correctly rendering "Friendly URLs" when using managed navigation.
Any help/ideas?
Our environment:
SharePoint Version: 15.0.4667.1000
Default Zone: http://InternalURL
Internet Zone: http://ExternalURL.domain.com
We are NOT using host named site collections
We ARE crawling the Default zone URL in our content source
Thanks,
Tommy

Hi,
We have now also observed the same issue with a Managed Property of type “Hyperlink/Picture”. The picture returns the wrong URL externally.
This post describes the same issue, however the poster found that setting UseAAMMapping=True doesn’t work in 2013:
http://sharepoint.stackexchange.com/questions/104806/set-the-useaammapping-property-of-a-managedproperty-object-map-an-url-of-a-h
We checked, and our Picture MP had UseAAMMapping=False. We set it to True, did a full crawl, and see no change in behavior. Path already had UseAAMMapping=True.
More info:
http://macslui.blogspot.com/2013/02/sharepoint-2010-problem-in-image-result.html
https://camerondwyer.wordpress.com/2014/08/04/beware-sharepoint-2013-search-results-and-the-listurl-property/#comment-2606
Thanks,
Tommy

WINDOWS INSTALLER PROBLEM WITH DESKTOP MANAGER

Please help!! I am a user of the Blackberry Desk Top Manager, running under Windows XP Service Pack 4.5. I recently downloaded the latest version of Desk Top Manager and I am getting the following error: - Flashing intermittently, whilst running the newly downloaded Desktop Manager - "Windows Installer Preparing to Install". I have removed the programme, downloaded it again from Blackberry's website and run my Windows updates to no available. I have now been advised that I must format my entire computer and reload Windows, which seems to be a rather onerous solution, as I have been using Blackberry's Synchronisation Programme for over a year successfully before this took place. I should appreciate it if you would let me know how this problem on my IBM Think Pad Laptop can be cured.

halimsujanto wrote:
Hi all..
I am having the same problem with desktop software 6, but my problem is more like this..
http://www.blackberry.com/btsc/KB19300
The Windows Installer pop-up during installation and cannot continue, it seems that windows installer 4.5 is the cause, but I cannot uninstall windows installer 4.5 because many of my programs were using this..
In this knowledge base solution it says to run BlackBerry Desktop Software.msi, but on BlackBerry Desktop Software 6, it need to run from setup.exe and cannot continue.. so I cannot install desktop software 6 on my computer, but I am able to install older version desktop software ie. version 4.2 to version 5.
I think that I am gonna reply here instead of making new thread about windows installer 4.5 and Desktop Software 6, please move if I did wrong.
PS. Bifocals..
The link you provided is missing. Or it just back to BlackBerry Technical Solution Center page and I tried searching the KB13781 with no success.
Please if there is other link that may be good for my problem.
Thank you very much.
Hi ihalimsujanto and welcome to the forums!
My first concern is that you do have a version of desktop manager that you can maintain your device and PIM data with, do you?
Please post back with as much detail as possible regarding your hardware and software setup.
Also post what steps you have taken to resolve the issue. The more detail we have the better we can help you. I'll reread KB 19300 and find what happened to my broken link.
Thanks.
Bifocals
EDIT:
ihalimsujanto,
Please review this Microsoft Knowledgebase Article ID: 555175
How to resolve Common "Windows Installer" Problems
Methods 3 and 4 may be pertinent.
Let us know how it goes!
Bifocals
Click Accept as Solution for posts that have solved your issue(s)!
Be sure to click Like! for those who have helped you.
Install BlackBerry Protect it's a free application designed to help find your lost BlackBerry smartphone, and keep the information on it secure.

Problems with Desktop Manager v5.0

Hey! Sorry if this has been asked before but i've been google searching with no luck.
I bought a BlackBerry Curve 8520 today and I'm having trouble with the Desktop Manager. I used the disk that came with the phone and installed v5.0. The Desktop Manager itself seems to be working fine and recognises my phone no problem, but the Media Manager isn't working. When I click "Launch" on the Media Manager I get the error message "Roxio Easy Media Creator: The certificate file is missing or has been corrupted. Please re-install it." I've tried reinstalling and repairing the software but still get the same error message. Does anyone know how I can fix it?
Thanks in advance!

Hi and Welcome to the Forums!
Easy Media Creator is not, to my knowledge, part of the RIM released desktop software (with Media Manager). What that tells me is that you have another type of Roxio software on that PC...and that has been known to cause odd problems, such as what you are experiencing. If you don't need Media Manager, then I encourage you to download the version of the RIM DTM software that excludes Media Manager. You can obtain that here:
https://www.blackberry.com/Downloads/entry.do?code=A8BAA56554F96369AB93E4F3BB068C22
Otherwise, you'd likely be advised to remove that other Roxio software in order to install DTM with Media Manager.
Good luck and let us know!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Lenovo T60 Strange problems with 'power management/power guage'

Guys
Since doing a system update my battery guage keeps displaying a grey guage with 3 - inside and if you run the mouse of the icon it says "Battery Not Installed" then 1 minute later it goes green with 100%. Its so random all i can imagine is that there is a problem with the power mangement software, but i have uninstalled the new version and installed an older version but this again doesnt work
I have tried to disable the PM driver from device manager and the Atmel TPM device but these do nothing
I have heard that this was quite common but cant find a solution
Can anyone help
Regards
This was found doing a google search
I have a strange issue. I have a Lenovo T60 laptop and I am experiencing problems with the power management/power guage.
It will often show the battery not installed (power gauge is a greyish-white color with dashed lines) or it shows a red X. It does not matter if I am on AC power or on Battery power, it will show the full range of power, battery level, not installed, or an error.
I have searched Lenovo's site and I seem to remember seeing an FAQ about this, but now that I need it, I cannot find it.
What can I check or do to stop this? While it is annoying, I am not sure if I am having a battery problem or not. I did check my battery on Lenovo's site to see if it was recalled and it is not.
I do appreciate any help that any one can give me.
Message Edited by iceman on 05-29-2008 05:05 PM
Message Edited by iceman on 05-29-2008 05:05 PM

Can anyone help?

Problem with Connection Manager. Can't change connection string / Server name

p.MsoNormal, li.MsoNormal, div.MsoNormal
{margin-top:0cm;margin-right:0cm;margin-bottom:10.0pt;margin-left:0cm;line-height:115%;font-size:11.0pt;font-family:'Calibri','sans-serif';}
.MsoChpDefault
{font-size:10.0pt;}
.MsoPapDefault
{line-height:115%;}
@page Section1
{size:612.0pt 792.0pt;margin:72.0pt 72.0pt 72.0pt 72.0pt;}
div.Section1
{page:Section1;}
Hi,
I have copied a number of SSID packages from a live server to my test server and am trying to get them up and running but I have a problem with the connection. The only thing that is different is the server name. I decided to keep the same connection in the connection manager as it is referenced in a dtsConfig file. I changed the dtsConfig file to reference the new servername [Data Source= new test server name]. I also check my paths and they are pointing to the correct config locations etc.
I found this post which was similar to my problem but I still get problems with the connection
http://forums.microsoft.com/MSDN/ShowPost.aspx?PostID=1319961&SiteID=1
I updated the connection by changing the server name in the actual connection. I did this from the data flow tab in the Connection Managers sections (MS Visual Studio). Right clicked - Edit - changed the name of the server name to my test server and selected the database. Test connection was fine, and saved this.
Once I saved this, the connection string changed to my current test server in the properties of the connection. However when I run the package I get the following error:
Error: 0xC0202009 at ReportsImport, Connection manager "myconnectionstring": SSIS Error Code DTS_E_OLEDBERROR.  An OLE DB error has occurred. Error code: 0x80004005.
An OLE DB record is available.  Source: "Microsoft SQL Native Client"  Hresult: 0x80004005  Description: "Login timeout expired".
An OLE DB record is available.  Source: "Microsoft SQL Native Client"  Hresult: 0x80004005  Description: "An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections.".
An OLE DB record is available.  Source: "Microsoft SQL Native Client"  Hresult: 0x80004005  Description: "Named Pipes Provider: Could not open a connection to SQL Server [53]. ".
Error: 0xC020801C at Myprocess import from file, BuyAtReportsImport [79]: SSIS Error Code DTS_E_CANNOTACQUIRECONNECTIONFROMCONNECTIONMANAGER.  The AcquireConnection method call to the connection manager "myconnectionstring" failed with error code 0xC0202009.  There may be error messages posted before this with more information on why the AcquireConnection method call failed.
Error: 0xC0047017 at Myprocess import from file, DTS.Pipeline: component "ReportsImport" (79) failed validation and returned error code 0xC020801C.
Error: 0xC004700C at Myprocess import from file, DTS.Pipeline: One or more component failed validation.
Error: 0xC0024107 at Myprocess import from file: There were errors during task validation.
So even if I change the existing connection properties and save and Build my package again, my connection properties (connectionstring, servername etc) all revert back to its original data source when I re-open the package. Simply it does not seem to be saving the connection properties i put in.
What am I doing wrong or how can I change the existing connection manager to look at the new server. The database is the same and I have full admin privilege on the server.
I don't want to recreate my packages as there are alot and they are not simple.
After changing the connection properties, saving and reloading I get a connection error. But this is because it is not retaining the new connection manger setting i entered.
Incidentally - I created a new SSID to perform a simple connection and write to the the server and it was OK so there is no problem with actually seeing the my test server.
Thanks in advance

Yes, the package is in visual studio and I have executed it. There are no errors but in the output i have the error message about my connection. My dtsConfig file is added to the project in the 'Package Configuration Organizer' and path and files are correct. This is the output error:
Error: 0xC020801C at xx import from file, xxReportsImport [79]: SSIS Error Code DTS_E_CANNOTACQUIRECONNECTIONFROMCONNECTIONMANAGER. The AcquireConnection method call to the connection manager "myconnectionname" failed with error code 0xC0202009. There may be error messages posted before this with more information on why the AcquireConnection method call failed.
I will try and run it using dtexec.exe. if I have two config files do i use
dtsexec.exe /f <packagename> /conf <configfile> /conf <secondconfigfile>

ITunes 10.6 Mac Problem with Subscriptions Management

I have my MacBook updated to the latest everything, including iTunes 10.6.
I have noticed a problem with iTunes, in that I can log in to the store with my AppleId and buy apps, music, books, magazines movies etc and everything works fine.
However some apps have an auto-renewing subscription and I have a problem here. I log in with my AppleId, go to manage account and am then presented with an endless loop of password requests.
There doesn't seem to be any way to get to the subscriptions to turn them off.
Does anyone have any helpful tips?
thanx

I just tried this also on my iPad and it doesn't work there either. Although I can get into the account settings, when I try and change a subscription I get a big black rectangle in the middle of the screen and the iPad hangs until the screen login thing kicks in and I have to enter my pincode again.
Maybe this is something to do with my AppleId, I can't actually believe this is a fundamental problem, although maybe I am optimistic.

Big Problem With Solution Manager EHP1 ?

Dear all,
I have already installed SAP Solution Manager EHP1, after the installation sucessfuly. I check the function: Project Administration ( T code : Solar_Project_Admin), then select New project button.
The program inform that:
"Runtime Errors: Message Type Unknow
What happened:
Error in ABAP Application program
The current ABAP program "SAPLSPROJECT_SYSTEM_LANDSCAPE" had to be terminated because
it has come across a statement that unfortunately cannot be excuted.
etc
Do you know about this problem, what is the errors ?
Thanks all.

Dear all.
With Solution Manager EHP1
SAP Basis: SAPKB7001-SAPKB70016, SAPKB70101-SAPKB70102
SAP ABA: SAPKA7001-SAPK70016, SAPKA70101-SAPKA70102
Detail log as below:
Runtime Errors MESSAGE_TYPE_UNKNOWN
Date and Time 28.04.2009 16:47:15
Short text
Message type " " is unknown.
What happened?
Error in the ABAP Application Program
The current ABAP program "SAPLSPROJECT_SYSTEM_LANDSCAPE" had to be terminated
because it has
come across a statement that unfortunately cannot be executed.
What can you do?
Note down which actions and inputs caused the error.
To process the problem further, contact you SAP system
administrator.
Using Transaction ST22 for ABAP Dump Analysis, you can look
at and manage termination messages, and you can also
keep them for a long time.
Error analysis
Only message types A, E, I, W, S, and X are allowed.
How to correct the error
Probably the only way to eliminate the error is to correct the program.
If the error occures in a non-modified SAP program, you may be able to
find an interim solution in an SAP Note.
If you have access to SAP Notes, carry out a search with the following
keywords:
"MESSAGE_TYPE_UNKNOWN" " "
"SAPLSPROJECT_SYSTEM_LANDSCAPE" or "LSPROJECT_SYSTEM_LANDSCAPEU28"
"SPROJECT_SYSL_CHECK_CENTRAL_SY"
If you cannot solve the problem yourself and want to send an error
notification to SAP, include the following information:
1. The description of the current problem (short dump)
To save the description, choose "System->List->Save->Local File
(Unconverted)".
2. Corresponding system log
Display the system log by calling transaction SM21.
Restrict the time interval to 10 minutes before and five minutes
after the short dump. Then choose "System->List->Save->Local File
(Unconverted)".
3. If the problem occurs in a problem of your own or a modified SAP
program: The source code of the program
In the editor, choose "Utilities->More
Utilities->Upload/Download->Download".
4. Details about the conditions under which the error occurred or which
actions and input led to the error.
Information on where terminated
Termination occurred in the ABAP program "SAPLSPROJECT_SYSTEM_LANDSCAPE" - in
"SPROJECT_SYSL_CHECK_CENTRAL_SY".
The main program was "SAPLS_IMG_TOOL_5 ".
In the source code you have the termination point in line 29
of the (Include) program "LSPROJECT_SYSTEM_LANDSCAPEU28".

Problems with device manager tacacs authentication

Similar Messages

Maybe you are looking for