Problems with Digidesign MBOX 1 and core audio driver

I hate to do this, but I may have to drop Pro tools because I can't run another application that has audio with the PT running as my sound card. I was on the digidesign support site and was told I might be able to run built in audio into a mixer and mix it with the MBOX outputs. There isn't an option in the sound driver drop down menu on my G5. Does anyone have any experience with MBOX 1, Pro tools and can get the built in audio to run at the same time the MBOX runs?
Food for thought?

I think I may have solved my problem. I recently installed Full Spectrum Warrior. I installed it to a different dri've than all of my other games. Lo and behold, no audio problems. After some further investigation, I believe that the audio problem lies in an old hard disk dri've that is in the beginning stages of failure. After I actually thought about it, my load times from this hard disk have been taking forever, but Full Spectrum Warrior loads very quickly. The dri've is going to die! But I guess it's ok, the dri've is almost 0 years old, and this is the 3rd computer its been in.
Thanks for your help,
Josh

Similar Messages

HP Pavillion dv6500 with windows xp pro AND NO audio Driver!

i have a hp pavilion dv6500 laptop entertainment pc here with me. It came with windows vista but i downgraded to windowx xp pro. it runs alot smoother! Everything works great except one problem? The audiio drivers that the hp websites has does not work? I cannot find the right audio drivers? I have tried even letting windows update search for the drivers with no luck? Why are the drivers on the website not working? How can i get this to work? if i upgrade it to windows 7 can i intergarde the vista drivers to work with the windows 7 program? i really need help! Thanks!

The General XP Downgrade Guide for HP notebooks is what you need to read. This well written guide has helped (at least!!) thousands of forum members downgrade their notebook successfully. There is a section that applies to your notebook.
The issue you are having probably is related to not installing the MSUAA driver before the device specific audio driver.
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

Problems with Live Update 3 and Core Center

Hi All
I have just put together the system listed below. On the first boot-up screen "Live Update 2" is displayed on the top right of screen. I installed "Live Update 3" from the Drivers & Utilities CD supplied with the Mobo. On rebooting, the computer crashes straight after loading Windows. The problem occurs even after I downloaded the latest version.
I also installed Core Center from the same CD. This works fine until I try to switch user. It then comes up with the error "No Hardware Monitor Found" and crashes. The same thing happens after downloading the latest version.
What could be causing this?
Many thanks.

Upgrade BIOS and see what happens...

Problems with importing .MP4 file and the audio in FCP 6

Hi all,
I am pretty new to Final Cut Pro and have just approached my first project.
I have a Samsung VP-MX20
http://www.samsung.com/uk/consumer/detail/spec.do?group=cameracamcorder&type=cam corder&subtype=flashcamcorder&model_cd=VP-MX20/XEU&fullspec=F
*Codecs H.264, AAC.*
I needed some space on the camera so halfway through a holiday i transfered all the video files from the camera to my Laptop.
I have imported these files from the hardrive
Vid rate - 25 fps
compressor - H.264
Pixel Aspect - PAL - CCIR 601
What seems to be the problem is ok when i drag the clip from the viewer to the canvas and apply insert, i get the box that says 'Change Sequence settings to match the clip settings?
i click yes and when the clip is layed out on the timeline there is a red line above the timeline, when i play the clip i only get bleeps as audio and not the original sound.
If i drag the playhead i can hear the audio but if i try to play all i hear us bleeps plus if i import an mp3 the red line appears above the timeline and the same applies
can anyone help me here.
Thanks
Elles

Hi Zak,
many thanks for your reply, i have contacted Apple and taking your advice and using compressor i have converted the codec H.264 to Apple Pro Res 422 for interlaced material.
I have imported this file and when i drag once again from the viewer to canvas i get the standard box asking to change the sequence to match the clip.
I am still getting the red line above the timeline and bleeping as audio.
any idea?

Problems with LabVIEW 7.1 and lock-in amplifier Stanford SR530?

Does has anybody had problems with LabVIEW 7.1 and the instrument driver for the lock-in amplifier Stanford SR530?
With LabVIEW 6 there are no problems at all, but with LabVIEW 7.1 it is impossible to communicate with the instrument.

amr_attia wrote: (Private message, no need to private message)
My problem is to get the data out from the divice x and y readings . Can you help me
Here is the code and snippet. I had it from before. It reads Channel 1 and Channel 2 from the SR530, that is whatever the display is for Channel 1 & 2. You set the display manually or programmatically, I let you figure that part out.
Cheers,
mcduff

Problems with MSI K8N-Neo3 and Command Queing.

I had some problems with two computers, based on the MSI K8N-Neo3 mainboard - they wouldn't boot into Windows after installing the drivers for the graphiccards. Before the breakdown of the forum, some people suggested that I was using to small PSUs. In the meantime I've solved the problem, by disabling the Command Queing feature in the drivers. Seems there may be a problem with the MSI board, and Maxtor SATA drives with Command Queing.
Key system components for the two computers:
AMD Sempron 3000+
MSI K8N-Neo3
1 GB Kingston PC3200 DDR-SDRAM
MSI GeForce 6600GT or MSI GeForce 6600LE graphics
Maxtor 120 GB SATA disk (6L120M0)
Sony DVD-RW drive
Anyway, I wanna say thanks for the quick answers...

Thats not what I read (assuming this is the same correct model)
420W double unit
DC O/P Load Max
+5V 42 Amp.
+12V 16 Amp.
+3.3V 28 Amp.
-5V 0.5 Amp.
-12V 0.8 Amp.
+5VSB 2 Amp.
Agreed that one is 420W, but is that it or not?

Using Skype with Digidesign Mbox soundcard?

not sure if this is in the right section for posting? I need to know how to configure Skype to use with my isight cam & digidesign m box. I configured it in the preferences then I tried the skype test call & i can hear the audio for about a second then it cuts out? At the moment i can use skype with the audio coming in from the built-in speaker on my mac but wanted it to come through the mbox soundcard?
Can anyone help?

I run an iMac with an original Mbox and FCE. It works fine most of the time. Occasionally it does boot without engaging the digidesign core audio driver. If that happens, go into your computer system preferences....click internal speakers (to switch to internal)...then click your digidesign hardware (to switch back to the Mbox)....and then it might work. Not sure why clicking and unclicking solves the problem, but it does.

Stupid question...where does the digidesign core audio driver belong

hey,
I did something really stupid and took out the digidesign core audio driver and I can't remember where to put it back. I've got a tdm system and never use the digihardware via core audio. now in order to switch from core audio to dae I have to quit logic and reboot where as before I could launch dae from within logic with out having to quit the program. I suspect this is because I removed the digicore audio driver.
any help would be appreciated.
ej

Probably get a faster response on the Digi forums.
Good luck!

I'm having problems with Adobe Illustrator , Photoshop and MediaEncoder !

I'm having problems with Adobe Illustrator , Photoshop and MediaEncoder !
The ilustrator when opening files from a lack of memory of which I own already find it hard 11Gbram , Photoshop crashes inesperdamente and the Media Encoder is not converting the video in nnehuma the options requested .
Would like guidance , never had such problems with Adobe software . Today got a MacPro 2x2,2.66 Ghz Dual Core Intel Xeon 11Gbram 240GB SSD .

Hi Mw,
Will it be possible for you to join the connect session: https://my.adobeconnect.com/rbhunwal
I want to have a look into this.
Thanks & Regards,
Raghuveer

I'm having problems with Flash Videos (Youtube and ESPN)

I have been having this problem for the last couple of days now and it is really annoying. Whenever I watch a flash video like on youtube or espn my computer freezes up and the audio will make a loud buzzing sound. I have attached a video with the post so you can see what happens. I don't have problems with anything else except this. I also get this error no matter what browser I use. I have system restored my PC as far as I can go, and I've ran a ton of scans and driver update checks and nothing seems to work.

merci a tous pour les nombreuses réponse. j'ai dû mal a les lire vue que je ne lit que le français. je vous remercié encore une fois amicalement. Blanchette 2.
Date: Mon, 25 Jul 2011 19:50:19 -0600
From: [email protected]
To: [email protected]
Subject: Re: I'm having problems with Flash Videos (Youtube and ESPN)
What I meant is Hardware Acceleration off (disabled).
>

I downloaded a new version of firefox. It said it had problems with my norton toolbar and now it doesn't feature it in the window. I'm not that comp savvy. How do I either get the Norton toolbar up or go back to the old firefox? Thank you.

I downloaded a new version of firefox. It said it had problems with my norton toolbar and now it doesn't feature it in the window. I'm not that comp savvy. How do I either get the Norton toolbar up or go back to the old firefox? Thank you.

Please authorize ADE 3 with same credentials that you used with older version of ADE

After having yet another problem with my MacBook Pro and having to wipe the drive, I am now unable to sync my iPhones etc without erasing all the music on them. Is there a way around this? I have no other library!

After having yet another problem with my MacBook Pro and having to wipe the drive, I am now unable to sync my iPhones etc without erasing all the music on them. Is there a way around this? I have no other library!
iTunes is a mess! It couldn't find it's own libraries and I was forced to create a new one. Now I don't know where my music is or if any's missing.

columbus new boy wrote:
How crap is that?
It's not crap at all.
It's not that simple. For example, I've 3500 songs on my MacBook but don't want them all on my phone, so I have to manually select each song again???
There has to be a solution.
Why not simply make a playlist with the songs you want on the iPhone?
and maintain a current backup of your computer.

I tried downloading a free app and it asked for my billing information and when i entered it, it says that there was a billing problem with a previoud purchase and i have to update it. I keep updating it and it wont let me verify it and i cant get apps

I tried downloading a free app and it asked for my billing information and when I entered it, it said that there was a billing problem with a previous purchase and I have to update it. I keep updating it and it wont let me verify it and I cant get any apps even if they are free, and I just Deleted some apps to make room for my new upate!

The message says: "The payment method has been denied, try another method"
I'm living in the same country and city since I was born, so I don't think the location is the problem.
And yes, I paid with the card a meal in Burguer King today. And nothing more.

HT3552 I have been trying to download apps from the app store and every time it tells me there is a problem with my previous billing and direct me to put in new billing information and every time i do that it still will not let me download any apps.

I have been trying to download apps from the app store and every time it tells me there is a problem with my previous billing and direct me to put in new billing information and every time i do that it still will not let me download any apps.

Have a look here > http://support.apple.com/kb/TS1646

Communication problem with Adobe 9.0 and HP Printer when I scan

I'm having a problem getting a .pdf file to come up when I scan from a HP 5610 All-in-one printer. Have uninstalled and reinstalled HP software three times but when I scan and want a pdf file it won't communicate with Adobe 9.0 reader for some reason. Is there a setting in Adobe reader that's a problem?
Thanks.

Thanks...found out that an HP5610xi All-in-One will not completely communicate with Adobe 9.0 Had to go to Adobe 6.0
Date: Thu, 17 Dec 2009 03:19:49 -0700
From: [email protected]
To: [email protected]
Subject: Communication problem with Adobe 9.0 and HP Printer when I scan
May be that the HP software doesn't support Adobe Reader 9.
>

Problems with Digidesign MBOX 1 and core audio driver

Similar Messages

Maybe you are looking for