Problems with Discoverer Viewer and the printable page

Hi,
I have a problem in Discoverer Viewer. I run a workbook, see the results and I click on "Printable Page". I set the page setup options to "Portait" and "100% scale". I preview the workbook in a PDF file and it's ok, I see the results in "Portait" and "100%".
I close the PDF file and I click again on the "Printable Page". This time, I set the workbook to "Landscape" and "20% scale". I preview the workbook in a PDF file and it's NOT ok, the results are still in "Portait" and "100%". And the date/time in the workbook is the time when I run the workbook the first time. So, it's seems like a browser cache problem. The problem repeats until I clear the brower cache. At that moment, the workbook will take the page setup that I set at this time. However, it will be the same workbook with the same results until I clear the cache once again.
If I save the PDF file on my Windows Desktop and I overwrite it each time, it's ok.
Can somebody help me on this??
Thank you!
Mathieu

Hi Michael,
I'm clearing the browser cache by going in Tools -> Internet Options. In the "General" tab, I click on the "Delete files..." in the "Temporary Internet Files" section" (middle of the window).
But I don't indicate that Discoverer is saving my printable page changes. I say that the first time I run a workbook, Discoverer saves it (the results) in the "Temporary Internet Files" folder in a PDF file. Each time I run the same workbook after that, Discoverer don't overwrite the file in the "Temporary Internet Files" folder. He takes the PDF file that is already there and show it to me. So, the results are the same even if the data has changed. It does this until I clear the browser cache (it deletes the PDF file in the "Temporary Internet Files" folder).
Do you understand?
Regards,
Mathieu

Similar Messages

Hi i have i problem with my iphone and the problem is the security question i have forgot the answers

Hi i have i problem with my iphone and the problem is the security question i have forgot the answers
I understand German and Italian i littlebit English

You need to ask Apple to reset your security questions; this can be done by phoning AppleCare and asking for the Account Security team, or clicking here and picking a method, or if your country isn't listed in either article, filling out and submitting this form.
They wouldn't be security questions if they could be bypassed without Apple verifying your identity.
(106626)

Had a problem with newest update and the advice from turingtest2 resolved my problem just to say thanks! Had never used this route before so was less painful than thought it would be again thanks.

Had a problem with newest update and the advice from turingtest2 resolved my problem just to say thanks! Had never used this route before so was less painful than thought it would be again thanks.

how can i find out what the fix is that works..please

Problem with iTunes Match and the song "This will be (an everlasting love)" from Natalie Cole

Hello,
I'd like to report a problem with iTunes Match and Natalie Cole's song "This will be (an everlasting love)".
When I stream it or download it on another device I don't get Natalie Cole's song but another one from Maxine Nightingale (Right back where we started from).
Please tell me if you have the same problem or how I can report this problem to apple.
Thank you.

Hi,
This is a user to user forum - not Apple. Contact them http://www.apple.com/support/itunes/contact/
Alternatively if the song was purchased from iTunes, you may be able to report the problem by signing into you iTunes account on your computer. Report an problem with an item you bought from the iTunes Store, App Store, Mac App Store, or iBooks Store
JIm

Problems with tethered capture and the 4.2 update

I'm having problems with tethered capture and my canon 1ds mark III since I updated to 4.2. Is anybody else having issues with tethered capture that was working fine before the update?

http://forums.adobe.com/community/search.jspa?peopleEnabled=true&userID=&spotlight=false&c ontainerType=14&container=3316&rankBy=date&q=4.2+tethering

Problem with a text in the last page of XML Publisher Template

Oracle Applications : 11.5.10.2
Oracle BI Publisher Template Builder for Word 10.1.3.4 Build 129
Hi,
I have a problem with XML Templates, I need that a text (*Este documento no confiere origen, señala únicamente país de manufactura.) is always at the bottom of a table and it has to be in every page, the problem is in the last page where the text is showed twice.
<?start:body?>
LINEA EN
FACTURA
DESCRIPCIÓN
CANTIDAD
NO. DE SERIE
PAIS DE MANUFACTURA*
F LINE_NUMBER
ITEM_DESCRIPTION
CF_PRIMARY_QTY
CF_SERIAL_NUMBER
CF_PAIS_DE_ORIGEN
E
*Este documento no confiere origen, señala únicamente país de manufactura.<?end body?>
*Este documento no confiere origen, señala únicamente país de manufactura.
Is there a way in order not to print the text twice in the last page?.
Regards,
Sergio.

Whatever the problem, it's likely due to how those paragraphs
were formatted in Word. The RH conversion usually only reflects
what was done there.
Are you comfortable inspecting the underlying HTML code (the
RH TrueCode tab)? I think you'd find some type of SPAN tag or STYLE
attribute that is determining an absolute paragraph width.
Otherwise, you could try this experiment:
1. Strip the base Word doc to a moderate size, but which
includes at least one of these non-wrapping paragraphs.
2. Select All and press Ctrl+spacebar (this removes all
formatting from the selected text).
3. Import that Word doc to RH and see how it looks now.
Good luck,
Leon

Problem with combo boxes and the reset button in certain situations

Hi Everyone,
i have a problem to make the reset-button function properly in an what-if analysis dashboard.
The dashboard uses two combo boxes that are not visible at the same time. In my application the second combo box only appears when a dedicated menu (label based menu button) has been activated.
So i have combo box 1 when menu A is active an dand combo box 2 when menu 2 is active.
After starting the dashboard initial values are fine. If you then directly change to menu 2 (seeing combo box 2 with
the correct default value) and press the reset button, the dashboard returns to the initial view, showing
the menu 1 with the correct default value. If you now switch back to menu 2, you will see, that the combo box 2
is empty (i.e. nothing selected).
I also tracked the destination cells for the combo box value results as well as the source cells for the "selected item" and the
destination cells for the "Insert Selected Item". All this values seem to be correct. Therefore i assume that
this is an issue of event handling. Maybe the combo box 2 does not refresh its selected value because it is already
invisible when the values are restored.
This case can easily be simulated by placing two combo boxes and a push button (that changes the visibility of
the combo boxes) and the reset button on the canvas.
Maybe someone can help. I am able to provide a test xlf, if neccessary.
Thanks,
Oliver
P.S. I am using Xcelsius SP4 (Version 5.4.0.0)

Hello Debjit_Singha_86,
thank you for your support. At the moment i have the following setting:
label based menu
- General: Insertion Type "value" from a list of ID's for the menu-items to a dedicated cell (current menu ID, say tab1!$A$1)
- Behavior: Selected item (position) fixted to item 1
hidden combo box
- General: Insertion Type "position" to a dedicated cell with the current choice (say tab1!$B$1)
- Behavior: Selected item (position) to the same cell (tab1!$B$1)
Can you give me a hint on how to connect the two components according to your solution, so that the label based menu sets the default for the hidden combox box only in case, that the reset button is pressed?
Thanks,
Oliver

Problem with tab bar and the method viewDidLoad

Hi,
I created a new project from the templates (tab bar application). then I created two views, for the two itens on the bar. The second view controller has a method viewDidLoad, but the method is loaded when the program launches. I tried the loadView method, but it´s never called.
How can i know when the view is loaded through a tab bar item?
thanks

I have an application based on the Tab Bar template as well, yet mine works. I also have views created via IB for each tab, but there are a series of connections which need to be made for the viewDidLoad method to be called. I made some notes along the way, perhaps they are helpful.
In these notes, what I did was create the Tab Bar project, but I didn't like the way the views were set up, so I created a series of new views, added them the way I preferred (all from files, all the same view, including the first view), and then deleted the two default views.
- Create a Tab Bar project.
- With XCode, create a new UIViewController for the new first view, save it, add it to the project.
- In IB, create a new view, save it, and add it to the project.
- In the new view's File's Owner, set the class to the new view controller.
- Connect the view outlet to the new view created.
- Go to the tab bar control in the MainWindow.xib and create a new view controller.
- Select the new tab button, and type in tab name and xib filename (without the extension).
- Compile and run. With a label in the new view, it is easy to see if it works.
Let me know if you find the problem.

Problems with update/insert and the ON clause

I have two rather identical mappings, both supporting SCD Type II. One of them works, the other one doesn't.
As in the SCD whitepaper, I have a split, that ultimately ends in a union, and then UPDATE/INSERTs into the target dimension. My problem is, that though using the matching_id for matching in one mapping, it is not allowed in the second mapping. The error is ORA-38104: The columns refererred in the ON-Clause cannot be updated "MyTable.MyId" (all loosely translated).
I just don't understand it, as it should be able to match the ID, and if not found, create a new record using INSERT.
I found a description of the error that sounded like this (https://cwisdb.cc.kuleuven.ac.be/ora10doc/server.101/b10744/e38001.htm):
ORA-38104: Columns referenced in the ON Clause cannot be updated: string
Cause: LHS of UPDATE SET contains the columns referenced in the ON Clause
Action: none
I just don't understand how this can be a problem, since I have to carry the surrogate key along, in order to assure that the proper records gets updated...
Anyone who can enlighten me on this one?
Regards
Kim

Oh yes :) I was a quite active participant. What puzzles me is, that I cannot get mapping #2 to work. I have tried to do everything virtually alike, with regards to the surrogate key, and the extra mapping column.
My setting for the keys are as below:
Surrogate Matching
Load column when inserting: yes no
Load column when updating: yes no
Match column when updating: no yes
Load column when deleting: no no
Table best viewed in notepad :)
It "feels" like it's trying to update the surrogate key, instead of actually matching.
Regards
Kim

Problem with multiple .swf in the same page

Hi everybody,
I got a small animation written in actionscript 2.0. I need
to load it several times in a webpage (about 20 instances), but
seems to be too many work and the web browser freezes.
Anyway, it's a relatively simple script (not complex
arithmetics per cycle, although two or three color gradient
refreshing), so I think the problem could be the fact of having so
many instances running at the same time...
Is there any way to fix this problem without reducing the
quality of the animation?
Thanks a lot!

Sorry Kglad, I didn't mean to be rude. With "No coding
errors" I meant the animation itself runs with no errors. I'm sure
you could run the 20 instances with no freezing (that's why I put
the post :) ) But I'm affraid it is an animation for a client, so I
cannot distribute the code.
Perhaps I didnt explain the situation clearly enough (in part
because of my poor english...).-
- By 20 instances I mean 20 separated embedded objects in the
html
- The animation is relatively simple. A turned on candle, in
each cycle I calculate the next position of the flame (that
oscilates from left to right). The flame is composed by 4
concentric gradients. There is NO loops, only an 'onEnterFrame'
function refreshing the flame each time.
- It's true that I got plenty variables at the _root level.
If that could be the problem, how can I workaround it?
- It is my first time trying to embed so many objects at the
same time too. No idea if the problem could be the way I embed the
object from the html :(
- The only thing I can guess is that when a cycle of one of
the object is running, the other 19 objects must wait their turn.
That would explain why the more instances I run, the worst results
I get. In that case, I wonder if there's a way to run them in a
kind of asynchronous mode, just guessing...
Any other comment would be appreciated. Anyway, thanks a lot
everybody for your colaboration.

I have a problem with HP ToolboxFX and the encountered an error and can not recover error msg.

Restarting the software and/or the computer do not fix the error. I have installed the new firmware in my CP2025dn Color Laser it now has version 20110212 firmware. The error msg reports: windows version Win32NT-6.0.6002.131072 and HP Toolbox FX version 004.012.00146. I am running the printer on my wireless router. My computer is a Dell Studio with Vista Home Premium Service Pack 2 - 64 bit OS. My wife's older laptop with WIN XP is not having a problem with Toolbox. I have uninstalled and reinstalled Toolbox on my computer today also. Where do I look next? Thank you!!!

Hi
Please find the link given below might help you to fix your issue.
Link
Let us know how it goes!
"I work for HP."
****Click the (purple thumbs up icon in the lower right corner of a post) to say thanks****
****Please mark Accept As Solution if it solves your problem****
Regards
Manjunath

Problem with lenovo t60 and the vga output

I have a problem with the vga output and the lenovo t60
When i put the videoprojector connector in to the lenovo t 60, the projector reponde is:
Not supported
H: 48.20khz v: 143,10 hz
On my desktop pc the projector function on 1024x768 resolution and the 60 hz to refresh.
The same configurations are on my laptop and the projector doesn't function
Please help me.

I too have this problem. My T61 worked fine for about a year, and then suddenly would no longer project. I had made no changes to the settings for the external display, though since the problem started I've tried many combinations without success. Typically the projector reports that the frequency settings the laptop is sending are unsupported. In my case the vertical rate is usually correct (60 Hz) but the horizontal rate varies wildly.
I suspect a hardware problem, as this post suggests: http://www.edugeek.net/forums/av-multimedia-related/32128-laptop-wont-display-projector.html. (Note the message claiming that 6 out of 40 Lenovo laptops exhibited this problem.)
Since my system is still under warranty I guess I'll have to get it repaired, but I'd rather hear of a software fix...

Having problems with front row (and the opticle drive)

I bought my macbook three days ago, and I'm already having problems. First off, I transfered music from my user profile on my old iMac G5 to the macbook via data DVD. My music collection had some purchaces from the itunes store, so I had to go through the authorization thing, and I can now play them just fine in the iTunes library, but the problem is, if I try to use the front row program to play my purchaced music, I get the message saying that I have to authorize it first. What the ****? Does anybody else have this problem? Also, like many other macbook users, I'm having problems with the opticle drive, such as getting cds to be recognized and other things of that nature.

I noticed that this problem started after I tried to use a software to unlock my drive's region...
I believe this is the problem. The VLC Media Player will usually play DVDs from other regions without changing the settings on your optical drive. You may need to reset your optical drive's firmware back to the original setting, make sure you have the region set for the one you'd prefer to use the most and then use VLC to play the other DVDs.
-Doug
P.S. After two years in the Front Row forum, I'm not sure I've ever heard of anyone playing HDDVD_TS folders with Front Row. I'm not saying it won't work, but I'm not sure it's really supported either. I do have DVD Studio Pro myself, but I'll have friends or family staying with me for nearly the next month, so my evenings and weekends will be a bit full to try making one up for testing...

Problems with photo view and email

My iphoto has started acting very badly. When I click on a thumbnail to view a photo, I often get a big grey area with an X in it. And the email photo feature won't work anymore. I click email, it starts to process it and then nothing. this is pretty serious because I use iphoto to store and organize all my pics.
I am using version 6.0.6

Marty
Is that an X or a ! ? Folks usually report an !
The ! or ? turns up when iPhoto loses the connection between the thumbnail in the iPhoto Window and the file it represents.
The most common cause of this is User Activity in the iPhoto Library Folder in the Finder.
Have you altered, moved or renamed anything in the iPhoto Library Folder?
If you haven't, then try rebuilding the database. Hold down the apple and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose the top three options.
If that fails you may have a damaged db file.
Try these in order - from best option on down...
1. Do you have an up-to-date back up? If so, try copy the library6.iphoto file from the back up to the iPhoto Library allowing it to overwrite the damaged file.
2. Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
3. If neither of these work then you'll need to create and populate a new library.
To create and populate a new library:
Note this will give you a working library with the same Rolls and pictures as before, however, you will lose your albums, keywords, modified versions, books, calendars etc.
Move the iPhoto Library to the desktop
Launch iPhoto. It will ask if you wish to create a new Library. Say Yes.
Go into the iPhoto Library on your desktop and find the Originals folder. From the Originals folder drag the individual Roll Folders to the iPhoto Window and it will recreate them in the new library.
When you're sure all is well you can delete the iPhoto Library on your desktop.
In the future, in addition to your usual back up routine, you might like to make a copy of the library6.iPhoto file whenever you have made changes to the library as protection against database corruption.
Regards
TD

Driver Scanner will not update, there is a problem with proxy sttings and the firewall

Driver Scanner will not update. It says there is a problem in connecting to the Uniblue browser.
Also there is a problem with the proxy set up and the firewall.

With that one, let's try getting an installer log to the Apple engineers for a look.
1. Open a command prompt window. (Start menu -> Run. Type in "cmd". Hit return.)
2. Drag and drop iTunesSetup.exe onto the window so that the full pathname of the file is at the command line prompt.
3. Type in a space, then the following line:
/l*v C:\log.txt
4. Hit return.
5. The installer will create a log file:
C:\log.txt
Find that file and send it as an attachment to this email address: [email protected]
in the email to Roy, be sure to include the following information:
- A link to the thread on Apple Discussions where the issue is being discussed
- The username you are using in the thread
- The version of iTunes you are using or trying to use
- the version of Windows you are using (mention service packs)
- A concise description of the issue you are seeing
- The exact text of the error message you are seeing

Problems with Discoverer Viewer and the printable page

Similar Messages

Maybe you are looking for