Problems with Disk Two Of Installation

Hi,
I've managed to install disk one of the installation cds and now i'm on my 6/7 time of trying to instal disk two. Everytime I do, it works for a while and then a sign comes up saying 'An error occured while installing Mac OX, then once I click continue it comes up with a box saying 'The installer could not install some files in "/" (or another area) it stops at different places each time and each time I clean the disk and it stops at a different spot. The disk to me looks very clean and has no marks at all.
This mac is second hand. I bought it off ebay with installation disks for leopard however the seller had put on snow leopard. I wanted to downgrade for a few reasons mainly ease of use and compatablity reasons. Neadless to say, now I have installed disk one, there is no way of going back to SL, so if anyone can help I will be very thankful!
Thanks,
Thom

you can call applecare.
(800) APL-CARE (800-275-2273)
give them the serial number of your mac and if it's not two old they'll send you replacement disks. snow leopard can be bought at any computer store for $30.
Message was edited by: V.K.

Similar Messages

Problem with SAPSERVER.CMD during installation, nothing happens

In the process of installing in our test environment but I seem to have problems with the Oracle 9i installation. When i double click the file sapserver.cmd nothing happens.
I have tried the workaround with renaming "symcjit.dll" and changing parameter JRE_MEMORY_OPTIONS=-nojit -ms16m -mx32m in oraparam.ini file. Then rerun installation with command "install\win32\setup.exe -J-Dsun.java2d.noddraw=true".
This time error message "Could not initialize the Java virtual machine. Program will exit!" occurred.
Can anyone please help me how to fix the problem. Thanks.

I am also facing same problem--
I have got IDES 4.7 CDs..
I am trying to install Oracle RDBMS 9.2 NT thru first CD... when I am running SAPSERVER.CMD it does nothing except showing wait pointer for few seconds.
it is actually creating three folders in TEMP folder images, jre, oui
I have tried running SAPSERVER.CMD from command prompt also but there was no luck.
When I tried to run SETUP.EXE there was same situation.
Even i tried to run setup.exe from \NT\I386 directory on command prompt with following command ...
SETUP.EXE -RESPONSEFILE E:\NT\I386\response\sapserver.rsp
but nothing could help me out...
I checked everywhere but could not find and LOG file which could explain me that what went wrong..
this is an appeal to all are techies.. plz help me..
I have tried it on two machines:
1) p4 2.66 512 ram 80+40 gb HDD 2000 server with sp4 and ie6, JRE, .NET framework 2.0
2) Dual core with 1 gb RAM 300 GB HDD 2003 Server with SP2 JRE, .NET framework 2.0
There was exactly same situation on both the machines..
Thank in advance

Problems with Disk Utility Repairing Permissions

Has anyone who had problems with Disk Utility after installing 10.5.1 through Software Update been able to resolve them by installing the Combo update instead?

The Solution?
REINSTALL OSX using the Install DVD.
I called APPLE Support and we went through a troubleshooting process to rule out Network Issues, Software Issues, File Issues and Hardware Issues. This process was very thorough.
In the end, we used the Operating System Installation DVD to reinstall the system, which took about 60 minutes including downloading the updates. Reinstallation did not affect any files or lose any applications. Everything was as I left it -- nothing was missing. Easy.
Now everything is back to normal.

I have a problem with disk utility that is not on my mac pro

I have a problem with disk utility that is not on my mac pro

Open your Applications folder then open the Utilities folder. It should be there.
If not, click the magnifying glass icon top right corner of your screen. That's Spotlight.
Type: Disk Utility
Hopefully it will show up.
Mac Basics: Spotlight

Trying to upgrade to 10.6 so my iPhone could synch...I'm getting this error message "Problem with this Windows (XP) Installer package. A program required for this install to complete could not be run." Any ideas?

I had iTunes 10.2.1.1 but needed to upgrade to 10.6 so my iPhone could synch...I'm getting this error message "Problem with this Windows (XP) Installer package. A program required for this install to complete could not be run." Any ideas?

This has been fixed. Answer is that I needed to go to "Apple Software Update" and repair it. (From my Control Panel).

Problems with WAS 6.40 Installation on Oracle - Phase 11 of 34

Hello,
Problems with WAS 6.40 Installation on Oracle (Phase 11 of 34)
with the installation of the Web Application server 6,40 SR1 on a Oracle server I get in phase 11 of 34 (Create Oracle Database) the following error-message:
CJS-00084 - SQL statement or script failed. Diagnosis: Error message: ORA-12547: TNS:lost contact.
error while loading shared library: libodm9.so : cannot open shared object file: No such file or dirctory.
Best Reagrds,
Ralf Steffens

hi Ralf
i've found one composite note for Oracle <a href="https://websmp203.sap-ag.de/~form/sapnet?_FRAME=CONTAINER&_OBJECT=011000358700001366932002">505630</a>
hope this solves...
Symptom
ORA-12547: TNS:lost contact
Brbackup, brarchive, brrestore or brconnect may terminate with errors similar to the following:
BR301E SQL error -12547 at location BrDbConnect-1
BR301E SQL error -12547 at location dbf_info_get-1
Sapdba returns the following error, for example:
SAPDBA: ORACLE error -12547 occurred while checking instance status!
The R/3 work processes or R3trans return the following error at Connect:
C *** ERROR => CONNECT failed with sql error '12547'
Other terms
TNS-12547, TNS-00517
Reason and Prerequisites
As part of the Net8 Connect, a program such as the R/3 kernel, R3trans, svrmgrl, sqlplus or ODMA establishes a connection to the Oracle database. If the connection terminates due to problems at the server end, it can result in ORA-12547.
Additional information for the error is often available in sqlnet.log. In many cases, other messages that are not reported by all tools precede ORA-12547. If ORA-12547 occurs when the ODMA accesses the old Oracle-Home during a database upgrade, for example, it may make sense to temporarily restart ORACLE_HOME on the old Oracle-Home for test purposes and then to execute sqlplus or svrmgrl.
Even if sapdba or the BR tools terminate with an ORA-12547 when calling sqlplus or svrmgrl recursively, you should, for test purposes, call sqlplus or svrmgrl manually with the operating system user that was used.
Hopefully, a more informative error message will appear in addition to ORA-12547, for example:
ld.so.1: oracleC11: fatal: relocation error: file
 /oracle/C11/817_64/libx8.so: symbol ksunsga_:
 referenced symbol not found
If you find accompanying error messages of this type, start a note search with the corresponding search terms since we are often aware of the problem and a solution may already be available. If you do not find any significant error messages or a suitable note, check the following possible causes for ORA-12547:
1. UNIX: Incorrectly linked Oracle tools
2. UNIX: Problems with XPG4 compliance and s-bit
3. Too many requests to the listener at the same time
4. HP-UX, Oracle 8.1: Missing OS patch
5. Use of CRYPTO parameters in sqlnet.ora
6. AIX: I/O Async is deactivated
7. Resource problems
8. The CONNECT_TIMEOUT_LISTENER parameter in listener.ora is too low
9. Activated Oracle trace
10. UNIX: Incorrect oracle executable authorization
11. SOLARIS: LD_LIBRARY_PATH set when you call ODMA
12. AIX: Problem with post/wait kernel enhancement
13. UNIX: Problems with the libobk library
14. SOLARIS: Incorrect search sequence in the path variable
15. UNIX: Conflicts between 32-bit and 64-bit files
Solution
1. Relink the Oracle software as ora<sid> with
cd $ORACLE_HOME/rdbms/lib
make -f ins_rdbms.mk install
 or
relink all
1. See Note 88884.
2. If individual work processes terminate with ORA-12547 when you start an R/3 instance, See Note 131561.
3. See Note 399610.
4. You can set security parameters that begin with SQLNET.CRYPTO_ in sqlnet.ora as part of the Advanced Security Option. Oracle releases < 8.1.7 cannot process these parameters correctly and result in ORA-12547. In this case, delete these types of parameters from sqlnet.ora.
5. If I/O is deactivated on AIX Async, the Net8 Connect fails with ORA-12547. In this case, activate I/O Async by using smitty.
6. Insufficient resources such as available memory on the database server can cause ORA-12547. For more information, see 384839.
7. In individual cases, it may make sense to increase the CONNECT_TIMEOUT_LISTENER parameter in listener.ora (for example, by 5 seconds, so from 10 to 15). Although a value of 10 seconds should usually be sufficient to establish a connection.
8. Delete the log files written by the Oracle trace in accordance with Note 92537.
9. Check to see whether the executable in $ORACLE_HOME/bin has the "rwsr-s--x" authorizations and the ora<sid> owner and correct this if necessary.
10. If you call ODMA on SOLARIS as part of a database upgrade and if LD_LIBRARY_PATH is set explicitly (on the lib directory of the target release), calling the old Oracle software through ODMA may fail with ORA-12547. If you use the old ORACLE_HOME to list sqlplus or svrmgrl, you get the following error:
ld.so.1: oracle<sid>: fatal: relocation error:
 file /oracle/<sid>/817_64/libx8.so: symbol ksunsga_:
 referenced symbol not found
ORA-12547: TNS:lost contact
 In this case, permanently delete LD_LIBRARY_PATH from the environment. This does not have any negative effects since the libraries are automatically found in the correct directories as of Oracle 8.1.
 If problems occur with the post/wait extension on AIX, the following type of errors will be displayed:
exec(): 0509-036 Cannot load program oracleC11 because of the
following errors:
 0509-130 Symbol resolution failed for oracle because:
 0509-136 Symbol pw_post (number 2524) is not exported
 from dependent module /unix.
 0509-136 Symbol pw_wait (number 2525) is not exported
 from dependent module /unix.
 0509-136 Symbol pw_config (number 2526) is not exported
 from dependent module /unix.
 0509-192 Examine .loader section symbols with the
 'dump -Tv' command.
ORA-12547: TNS:lost contact
1. If the libobk library was created incorrectly, the following type of errors may occur:
/oracle/C11/817_64/bin/oracle: /sbin/loader:
 Fatal Error: Cannot map library libobk.so
/usr/lib/pa20_64/dld.sl: Unable to find library
 '/oracle/C11/lib64/libobk.sl
exec(): 0509-036 Cannot load program oracleC11 because of the
 following errors:
0509-150 Dependent module /oracle/C11/817_64/lib/libobk.a(shr.o)
 could not be loaded.
0509-152 Member shr.o is not found in archive
ORA-12547: TNS:lost contact
 Check to see whether libobk exists and, if it is a link, that it points to a valid object. Note 142635 contains more information about this. The libobk link may point to this if a libsbtsh8.* file exists in the Oracle library directory. If you are using a third-party Backint tool, contact the relevant supplier, since libobk often has to point to a backint-specific library.
1. If an error such as
ld.so.1: ./svrmgrl: fatal: libucb.so.1: open failed:
 No such file or directory
ORA-12547: TNS:lost contact
 occurs, the PATH has probably been set incorrectly. For more information, see Note 44361.
1. If an error such as
ld.so.1: oracle<sid>: fatal: <library> wrong ELF class: ELFCLASS64
ORA-12547: TNS:lost contact
 concerning "wrong ELF class" occurs, check whether the <library> mistakenly has a different bit size than the tool that was called. You can determine this using
file <library>
file <tool>
 All the files involved must uniformly be either 32-bit or 64-bit.

Regards
Arunkumar

Problems with Cluster Ready Service installation (RAC) in Oracle 10g R1

Hello
I have got problems with this installation. I am starting Oracle user
At the end of the installation I get a mesage when all Configuration Assistants are failed
I have got 2 computers with Windows 2000 PRO, two networks (private and public)
As a shared disk I use one external disk (with USB) attached to one computer.
What to do here?
please for a reply
Martin
PROT-1: Failed to initialize ocrconfig
SCLS error 1 reading current privileges.
Internal Error Information:
Category: 1234
Operation: scls_iddb_has_privgrp_by_name
Location: NetLocalGrou
Other: get local group failed
Dep: 0
Step 1: checking status of CRS cluster
Step 2: configuring OCR repository
ignoring upgrade failure of ocr(-1)
failed to configure Oracle Cluster Registry with CLSCFG, ret 102
Result code for launching of configuration assistant is: 1
The OUICA command is launched from D:\oracle\product\10.1.0\crs\oui\bin\ouica.bat.
Launched configuration assistant 'Oracle Notification Server Configuration Assistant'
Tool type is: Optional.
The command being spawned is: 'D:\oracle\product\10.1.0\crs/bin/racgons.exe add_config migi:4948'
Start output from spawned process:
End output from spawned process.
Configuration assistant "Oracle Notification Server Configuration Assistant" failed
Result code for launching of configuration assistant is: 1
The OUICA command is launched from D:\oracle\product\10.1.0\crs\oui\bin\ouica.bat.
Launched configuration assistant 'Oracle Private Interconnect Configuration Assistant'
Tool type is: Optional.
The command being spawned is: 'D:\oracle\product\10.1.0\crs/bin/oifcfg.exe setif -global "public"/10.0.0.0:cluster_interconnect "public"/192.168.1.0:public'
Start output from spawned process:
PRIF-12: failed to initialize cluster support services
End output from spawned process.
Configuration assistant "Oracle Private Interconnect Configuration Assistant" failed
PRIF-12: failed to initialize cluster support services
Result code for launching of configuration assistant is: 1
The OUICA command is launched from D:\oracle\product\10.1.0\crs\oui\bin\ouica.bat.
Error:*** Alert: Some of the configuration assistants failed. However these are optional assistants, so they are not required for the correct configuration of your system. If you want to try to run those assistants again, select the failed assistants and click the 'Retry' button. ***
User Selected: Yes/OK
Starting to execute configuration assistants
Launched configuration assistant 'Oracle Cluster Ready Services Configuration Assistant'
Tool type is: Optional.
The command being spawned is: 'D:\oracle\product\10.1.0\crs/install/crssetup.config.bat'

Also you clusterware installation installs to an ORACLE_HOME.
Oracle does only make a differentiation, if it has to be clear, that you got a clusterware home and a database home.
Normally if a patch is referring to $ORACLE_HOME (and the patch can be used for clusterware & database), it just means the installation directory of the oracle software installed.
Sebastian

Problem with Disk Utility and with ITunes and with Classic

Greetings. I have had problems with ITunes recently; when I try to open it, it gives me the error message: "The ITunes Music Library file is locked, on a locked disk, or you do not have write permission for this file."
When I looked at the ITunes discussion section, people had two ideas for other people who had the same problem:
(1) Make sure that the library of music files is write-enabled (which it is) and not locked (it isn't) and
(2) Go to Disk Utility and repair the disk.
Since (1) is not a problem, I am trying (2). However, when I open Disk Utility, it just stays on the window, stating "Gathering disk information..." and proceeds no further.
Perhaps related to these problems, when I try to start up Classic, the window opens, but it gets stuck at the very beginning (stating "Classic starting up using System Folder ...") and proceeds no further.
Can anyone help me with these multiple problems? Thanks in advance.

amandel
The problems you report are different than those relating to the iTunes receipts/DU conflict. Trashing those receipts as suggested is necessary to get DU to repair permissions, but, as I understand it, you couldn't get DU to recognise your drives. And I've seen no posts relating to iTunes 6 and Classic.
I've had the problem you describe before (at least vis-a-vis DU). In principle DU's "Repair Disk" function would fix it, but of course if the disk's don't mount in DU then you can't fix them:)
Therefore fsck is a good solution, or trying DU from the Installer Disk (don't start to install, just let the first installer window appear, go to the menu and choose "Open Disk Utility") and repairing. Then reboot and repair permissions, preferably with DU running from your hard drive.
Maybe you're more of a "don't touch what's still running" kind of person, but it sounds to me like the systems a bit wobbly and needs some tender loving care. You could try a clean up using a program like OnyX as well - it won't do any harm.
Robert
G4 PB Mac OS X (10.3.9)

My Mac Pro 1,1 won't boot, problems with disk.

I am having problems booting my 2006 Mac Pro 1,1. I was using my computer just fine and then I shut the computer down. When I tried to restart it the computer booted the the Apple logo and the status whell began turning, and then a progress bar appears under that and begins to load. It loads about 1/10 of the way, dissappears and then the computer shuts off.
I booted the computer using Command + R and attempted to reinstall OSX Lion, but it would not allow me to select a drive to install too. They are all grayed out. From here I went into Disk Utility and attempted to Verify Disk Permissions. A laundry list of errors immediatly came up. Next step was the verify the disk, at which point the message read that the disk seamed to be corrupted and needed to be repaired. I tried to repair the disk but was then told that the disk couldn't be repaired, to recover any data and reformat the drive.
The problem with this is that I have not backed anything up (yes I know I am a TARD) but this is my situation and I need some help. At this point I would just like to recover the info that's on this disk, and without a computer to do this I'm not sure how to do this. At this moment I am attempting to make a disk image of the corrupted drive in hopes that this will allow me to restore it later.
Please somebody help. I bought this computer with a lot of pre-installed programs, (i.e Adobe Creative Suite, Final Cut Studio, etc.) not to mention all of my other files.

I have an external drive that I used to keep files backup up on, again I'm a TARD, and no longer do. I've been messing around with the Recovery option when I boot and during this venture saw my main HD unmount and just would not do anything. After trying a few things I reset the system again and when I got back to recovery noticed that the drive had mounted again. I am now using disk utility to copy the entire contents of this main HD to the external drive. Est. time remaining is 12 hours. I did have the external filled up with some stuff but nothing I wasn't willing to trade for all of my applications (that came pre-installled when I bought the machine) and other files. I've read that even doing this isn't a fail proof way to solve the problem as their are still corrupted files, but Disk Utility said that my drive couldn't be repaired and to backup what I could and format the drive. I am hoping that backing up everything to this external drive will give me at least some oportunity to recover my apps, files etc. It also said that if disk utility couldn't fix the drive to boot from the CD and try it that way. Unfortunatly I downloaded Lion and don't have one. I just bought this HD about 2 years ago. Is a Seagate and I haven't had any problems from it. When my computer stopped working I had just been using it and just reset the computer. I am definitly going to get another drive but what are your thoughts on my ability to recover everything? I've heard there are some programs that can handle it.

Problems with Disk Utility & Mounting DMG!! Help!!

Hey guys, im a fairly inexperienced mac user anyways I recently bought a IBOOK G3 with Tiger 10.4 and i'm having major issues with Disk Utility and installing applications.
The issues with D.I are that it loads up then I get the error message "Disk Utlity started but a background process needed in Disk Utility didn't start properly. Please quit and restart Disk Utility. And when I do restart it, i get the same error over and over.
Also my second problem is whenever I try to and install DMG files I get the error: "Broken Pipe" and sometimes "Device Not Configured"
I've tried searching for resolutions for each problem but they both involve the other functioning! I'm really at a loss, i've tried using programs like pacifist to reinstall my original files etc and they haven't seemed to help.
Any advice would be greatly appreciated! Thank you xxx

Hi Kellie, and a warm welcome to the forums!
Could be many things, we should start with this...
"Try Disk Utility
1. Insert the Mac OS X Install disc that came with your computer, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu. (In Mac OS X 10.4 or later, you must select your language first.)
*Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
3. Click the First Aid tab.
4. Click the disclosure triangle to the left of the hard drive icon to display the names of your hard disk volumes and partitions.
5. Select your Mac OS X volume.
6. Click Repair. Disk Utility checks and repairs the disk."
http://docs.info.apple.com/article.html?artnum=106214
Then Safe Boot from the HD, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
The usual reason why updates fail or mess things up, is if Permissions are not fixed before & after every update, with a reboot... you may get a partial update when the installer finds it doesn't have Permissions to change one obscure little part of the OS, leaving you with a mix of OS versions.
Some people get away without Repairing Permissions for years, some for only days.
If Permissions are wrong before applying an update, you could get mixed OS versions, if Directory is the slightest messed up, who knows!
If many Permission are repaired, or any Directory errors are found, you may need to re-apply some the latest/biggest updates.
May even need to do an Archive and Install if you have room on the HD, but saves all your files and gives a new OS...
http://docs.info.apple.com/article.html?artnum=107120
I only use Software Update to see what is needed, then get them for real via...
http://www.apple.com/support/downloads/
That way I can wait a week or so, check the forums for potential problems, and get Permissions & such in order before installing.
Report if there were errors please.

Problems with disk permissions repair

What software will work when disk permissions fails to solve the problem? My Mac is restartiing on it's own when I'm working......
Thanks,
CP

Two things:
1. How to Reset the SMC.
2. Backup your files, erase the hard drive, reinstall OS X or try:
How to Perform an Archive and Install
An Archive and Install will NOT erase your hard drive, but you must have sufficient free space for a second OS X installation which could be from 3-9 GBs depending upon the version of OS X and selected installation options. The free space requirement is over and above normal free space requirements which should be at least 6-10 GBs. Read all the linked references carefully before proceeding.
1. Be sure to use Disk Utility first to repair the disk before performing the Archive and Install.
Repairing the Hard Drive and Permissions
Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger, Leopard or Snow Leopard.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer. Now restart normally.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Do not proceed with an Archive and Install if DU reports errors it cannot fix. In that case use Disk Warrior and/or TechTool Pro to repair the hard drive. If neither can repair the drive, then you will have to erase the drive and reinstall from scratch.
3. Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When you reach the screen to select a destination drive click once on the destination drive then click on the Option button. Select the Archive and Install option. You have an option to preserve users and network preferences. Only select this option if you are sure you have no corrupted files in your user accounts. Otherwise leave this option unchecked. Click on the OK button and continue with the OS X Installation.
4. Upon completion of the Archive and Install you will have a Previous System Folder in the root directory. You should retain the PSF until you are sure you do not need to manually transfer any items from the PSF to your newly installed system.
5. After moving any items you want to keep from the PSF you should delete it. You can back it up if you prefer, but you must delete it from the hard drive.
6. You can now download a Combo Updater directly from Apple's download site to update your new system to the desired version as well as install any security or other updates. You can also do this using Software Update.

Problems with Disk Utility

Hi,
iPhoto crashed my computer in a big way and after leaving the rainbow wheel for about an hour, with very sluggish response I kept the power button down and reset (without doing a shutdown).
Unfortunately it has a created a massive problem with my Macbook Pro, in so much that it no longer boots up.
I get the grey screen with the Apple and progress wheel, but then nothing.
I have booted from an external USB hard disk (also 10.6) and ran disk utility.
S.M.A.R.T. reports all ok
Repair disk reports all ok
Repair disk permissions fails with the following error:
Error: Permissions verify or repair failed
I've checked the system.log file and this is the error:
com.apple.DiskManagement.RepairPermissions|2011-09-05 18:15:02 +0100
Sep 5 18:16:38 unknown-c4-2c-03-37-31-6d diskmanagementd[1230]: APICALLBACK_dmAsyncFinishedForDisk_PERM_result dmErr=-9901 detailErr=10
Sep 5 18:16:38 unknown-c4-2c-03-37-31-6d com.apple.ReportCrash.Root[2005]: 2011-09-05 18:16:38.593 ReportCrash[2005:2703] Saved crash report for repair_packages[1996] version ??? (???) to /Library/Logs/DiagnosticReports/repair_packages_2011-09-05-181638_localhost.cra sh
There's other errors in the system.log, but these seem the most pertinent to the problem.
Can anyone please advise on how I repair this, or do I need to buy Disk Warrior and rebuild the directory structure?
Thanks,
GD

Hi,
Thanks for the reply.
Superduper to create a bootable carbon copy and TM for incrementals.
I really don't want to re-install OSX and then recover the components from TM though for several reasons.
Thanks.

Problems with Java 1.5_X installs help required.

Hi All,
Having problems with multiple machines with Java 1.5_X installs, the install ppears to complete successfully, and the version checking on the Java Website says that Java is installed however the checking of the Java Virtual Machine using the webpage on the Java site fails, ends up with a red cross in the right hand corner and opening the java console receive this list of messages:
load: class testvm2/Main.class not found.
java.lang.ClassNotFoundException: testvm2.Main.class
     at sun.applet.AppletClassLoader.findClass(Unknown Source)
     at java.lang.ClassLoader.loadClass(Unknown Source)
     at sun.applet.AppletClassLoader.loadClass(Unknown Source)
     at java.lang.ClassLoader.loadClass(Unknown Source)
     at sun.applet.AppletClassLoader.loadCode(Unknown Source)
     at sun.applet.AppletPanel.createApplet(Unknown Source)
     at sun.plugin.AppletViewer.createApplet(Unknown Source)
     at sun.applet.AppletPanel.runLoader(Unknown Source)
     at sun.applet.AppletPanel.run(Unknown Source)
     at java.lang.Thread.run(Unknown Source)
Have tried uninstalling and reinstalling to no effect, have tried uninsalling and reinstalling IE to no effect. Please note the problem does not happen when I install 1.6 versions on the same machine but unfortunately I need to get 1.5 working on these machines.
Any help is appreciated.

This is silly. Just because you don't know Vuze doesn't mean there's no problem with this update. My friends are having the same issue, of course we are looking at possible problem from Vuze's part but we cannot really say this update has 100% nothing to do with Vuze's launch failure, can we?
P.S. Since Vuze is not banned by law, it's still legal to use it. It's up to people if they want to use it for good or bad.
dogquake

Is Anyone Else Having Problems With Key Chains After Installation?

My installation went ok but I'm having all kinds of problems with Key Chains now that I didn't before. In addition to them being corrupted, it won't let me save corrected names and passwords even when it asks for them.

Is there a fix if you don't have your Key Chains folder from before the 10.6 installation? I keep having to re-type my MobileMe and student Gmail passwords in Mail, and if I check remember password in Key Chain, I keep having to re-type the password until I uncheck the box, but then that means I have re-type the password every time I send an email or put the computer to sleep.
Also, Keychain Access's First Aid shows that there are no problems whatsoever. When I click on MobileMe in my System Preferences I get 8 or so consecutive errors stating "Keychain Error. There was a problem saving to your keychain. Try again or use Keychain Access to verify your keychain." When I look at my login within Keychain Access, it says my MobileMe keychain is restricted (even after entering my administrator password).

Problem with New HDD and installation of Qosmio Player

Hi All,
Hope someone can help, I have had my Qosmio for 2 1/2 years now and recently had a problem with the hard disk. I decided to replace the hard disk as this was the quickest solution. The problem I have now is that I cannot receive TV on media center. I was trying to install qosmio player on the HDD to see if it made any difference but when I run the recovery disk supplied the software tells me that there is not enough disk space!!. The laptop came with a 60G hard disk and the new HDD made by the same manufacturer is a 150GB, can anyone help me out with this one would be appreciated.
Thanks
ED.

Qosimo F10.
Sorry my previous entry was garbled. I upgraded the HDD to 120, could not get the Qosimo player to reload, same error, No space on HDD.
I then upgraded to Vista and downloaded the new Vista Qosimo drivers, created the ISO image and booted from it. Still did not work.

Problems with Disk Two Of Installation

Similar Messages

Maybe you are looking for