Problems with Disk Utility Repairing Permissions

Has anyone who had problems with Disk Utility after installing 10.5.1 through Software Update been able to resolve them by installing the Combo update instead?

The Solution?
REINSTALL OSX using the Install DVD.
I called APPLE Support and we went through a troubleshooting process to rule out Network Issues, Software Issues, File Issues and Hardware Issues. This process was very thorough.
In the end, we used the Operating System Installation DVD to reinstall the system, which took about 60 minutes including downloading the updates. Reinstallation did not affect any files or lose any applications. Everything was as I left it -- nothing was missing. Easy.
Now everything is back to normal.

Similar Messages

Problem With Disk Utility - Repair Permissions

Is anyone else having this problem. When I go to verify or repair permissions using Disk Utility, it behaves nothing like it did in Tiger. For 1, takes like 10 minutes... took about 2 before. And 2, I keep getting a Warning message:
Warning: SUID file "System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/MacOS/ARDAg ent" has been modified and will not be repaired.
I installed Leopard doing an Erase and Install.... so this was a fresh - full install. What's the deal?

Oh for the love of god, it begins again!
Folks, chill out!
Leopard introduces a completely different "installer package receipt" format called a flat file format based on SQLite. The database file on my Mac (from a pre-release version of Leopard) is the following:
/Library/Receipts/db/a.receiptdb
The file is 140 MB in size and contains a ton of information. Sorry, I'm currently burning my final copy of Leopard to a DVD otherwise I'd run Repair Permissions here on the pre-release version I'm currently running and comment on the results. I did notice that it takes a while longer than in Tiger. It's quite possible that Repair Permissions in Leopard is looking at many more things than just the basic file permissions that it did in Tiger, Panther, or Jaguar.
Access Control Lists (ACLs) are an additional, advanced type of permission setting for files and directories. The fact that Repair Permissions in Leopard even mentions ACLs suggests that it's concerning itself with a great deal more things than it did in Tiger, Panther, or Jaguar.
I didn't get that message about ARDAgent in the pre-release versions, I'll take a look at it more once I finish burning and installing the release version.
ARDAgent is part of Apple Remote Desktop, and 'SUID' refers to a "SetUID" executable. (For more info on SetUID, you might check out my page on http://homepage.mac.com/mdouma46/fdup/fdup.html where I wrote a utility to repair the permissions of Jaguar Disk Utility's Repair Permissions feature. All that warning is saying is that Disk Utility isn't going to alter the permissions on the file. I honestly don't think it's anything to worry about, nor are any of the other messages that it reports.

Problem with Disk Utility/Repair Disk Permissions/Show details

I just upgraded from Tiger to Leopard 10.5.8 and everything very nearly went well, thank you.
Very nearly, because at the end of repairing disk permissions, when opening "Show details", now there is appearing following remark:
"Permissions differ on "System/Library/Frameworks/CoreVideo.framework/Versions/A/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- ."
This message stays on, even after repeated repair runs.
Any reason to be worried?

It's innocuous. It's the result of some upgrades. Nothing about which to be concerned. The message will be repeated each time you repair permissions.

Disk utility repair permissions stops altogether

I tried running Disk Utility Repair permissions and received a grey message box saying it stopped repairing permissions because of the following error:
Error: The underlying task reported failure on exit.
This same error message was repeated in the usual information box that disk utility uses to provide detail about what it is doing.
I believe the problem occurred because I selected Macintosh HD and added another user (myself) to read/write in the disk permission section of the information window, and I also applied that to all enclosed items. I did this in the first place because of repeated attempts and failuire to install the latest version of skype into my applications folder (being told that I didn't have enough permissions to complete the overwrite task). When I tried verifying the disk I received the error message "ERROR: could not freeze volume permissions denied"
I switched users to a specific administrator account that I reserve for troubleshooting, but got the same result when I tried running disk utility.
As a not unrelated issue when I attach my ipod touch, itunes says that it cannot recognize this ipod, then after about the third time simply doesn't acknowledge my itouch exists.
everything was working well until i did this large change permissions operation.
So does anyone have any idea what I have done (wrong) and how I can fix it?
thanks
John

John Fountain wrote:
I believe the problem occurred because I selected Macintosh HD and added another user (myself) to read/write in the disk permission section of the information window, and I also applied that to all enclosed items.
Uh-oh. You completely trashed your whole system by doing that. Boot up from your Leopard DVD and restore that last Time Machine backup that was made before you made that mistake. If you don't have any backups you will have to reinstall Leopard.
I did this in the first place because of repeated attempts and failuire to install the latest version of skype into my applications folder (being told that I didn't have enough permissions to complete the overwrite task).
When that happens, just trash the old application first, then drag in the new one.
When I tried verifying the disk I received the error message "ERROR: could not freeze volume permissions denied"
I switched users to a specific administrator account that I reserve for troubleshooting, but got the same result when I tried running disk utility.
Changing permissions on the HD and applying to enclosed items hosed your whole system. That's what's causing all your problems. It's doubtful that you will be able to repair it. Restore your system from backup, or reinstall.

I have a problem with disk utility that is not on my mac pro

I have a problem with disk utility that is not on my mac pro

Open your Applications folder then open the Utilities folder. It should be there.
If not, click the magnifying glass icon top right corner of your screen. That's Spotlight.
Type: Disk Utility
Hopefully it will show up.
Mac Basics: Spotlight

Problems with Disk Utility & Mounting DMG!! Help!!

Hey guys, im a fairly inexperienced mac user anyways I recently bought a IBOOK G3 with Tiger 10.4 and i'm having major issues with Disk Utility and installing applications.
The issues with D.I are that it loads up then I get the error message "Disk Utlity started but a background process needed in Disk Utility didn't start properly. Please quit and restart Disk Utility. And when I do restart it, i get the same error over and over.
Also my second problem is whenever I try to and install DMG files I get the error: "Broken Pipe" and sometimes "Device Not Configured"
I've tried searching for resolutions for each problem but they both involve the other functioning! I'm really at a loss, i've tried using programs like pacifist to reinstall my original files etc and they haven't seemed to help.
Any advice would be greatly appreciated! Thank you xxx

Hi Kellie, and a warm welcome to the forums!
Could be many things, we should start with this...
"Try Disk Utility
1. Insert the Mac OS X Install disc that came with your computer, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu. (In Mac OS X 10.4 or later, you must select your language first.)
*Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
3. Click the First Aid tab.
4. Click the disclosure triangle to the left of the hard drive icon to display the names of your hard disk volumes and partitions.
5. Select your Mac OS X volume.
6. Click Repair. Disk Utility checks and repairs the disk."
http://docs.info.apple.com/article.html?artnum=106214
Then Safe Boot from the HD, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
The usual reason why updates fail or mess things up, is if Permissions are not fixed before & after every update, with a reboot... you may get a partial update when the installer finds it doesn't have Permissions to change one obscure little part of the OS, leaving you with a mix of OS versions.
Some people get away without Repairing Permissions for years, some for only days.
If Permissions are wrong before applying an update, you could get mixed OS versions, if Directory is the slightest messed up, who knows!
If many Permission are repaired, or any Directory errors are found, you may need to re-apply some the latest/biggest updates.
May even need to do an Archive and Install if you have room on the HD, but saves all your files and gives a new OS...
http://docs.info.apple.com/article.html?artnum=107120
I only use Software Update to see what is needed, then get them for real via...
http://www.apple.com/support/downloads/
That way I can wait a week or so, check the forums for potential problems, and get Permissions & such in order before installing.
Report if there were errors please.

Disk Utility repairs permissions; 1 hour later they're un-repaired again.

(March 2009 24" iMac. Lion 10.7.3)
I repair permissions on Macitosh HD (boot volume) every-other week. I've noticed that the same permissions seem to need repair each time. Here are the last seven lines from the Disk Utility window from the May 19 run:
One hour later, I repeated the operation. Here are the last seven lines:
I might be overly sensitive, but I detect certain similarities between these results. In fact, it looks like Disk Utility repairs exactly the same permissions every time and those permissions are corrupted shortly after they are repaired.
What's going on here? Should I be alarmed? Or should I panic?

I'd like to delete this post (if I knew how). There are several other threads on this topic, and other contributors report exactly what I observe. It turns out it's a harmless artifact of upgrading from 10.5 to 10.6 to 10.7, rather than doing a clean install of Lion. This article is reassuring: http://support.apple.com/kb/TS1448
I shoulda searched more thoroughly before posting.

Problems with Disk Utility - Partition of my HD cannot be repaired.

Sorry, I rarely post here and not sure if I am posting in the right forum.
I have an issue with using the disk utility on my Mac OS X 10.4.1
I am trying to recover a partition on my hardrive.
Image here (on the right):
http://img118.imageshack.us/my.php?image=picture1ztl.png
I don't know how to recover HD2_Personal. I can't verify or repair it. Any recovery software avaliable?
Thanks for your attention.
Message was edited by: jbnk-w

Ya, but you are talking about some systems files, I think.
Actually I am talking about any file. I'd hate to discover too late that that I'd copied over a corrupt data file, erased my drive, and had ruined my chances of perhaps repairing it and getting a good copy.
If he/she can backup needed files, reformat, install new system, update, and then copy needed files back. This to me, takes less time, and you got a nice clean new system.
Yes, you have a new system, but if DW works it will take a lot less time than what you're talking about doing, especially since you have to be at the computer doing it all! Install new system, then all the updates, then all the software again, with all their updates, then put all the preference files, etc. back?
I have DW, and I bought it in hopes to recover one file, waste of money, think its version 4 dot something
I don't know the versions offhand. Make sure it is the correct version for your OS.
gladly give it away.
I'd take you up on that!

Problems with Disk Utility

Hi,
iPhoto crashed my computer in a big way and after leaving the rainbow wheel for about an hour, with very sluggish response I kept the power button down and reset (without doing a shutdown).
Unfortunately it has a created a massive problem with my Macbook Pro, in so much that it no longer boots up.
I get the grey screen with the Apple and progress wheel, but then nothing.
I have booted from an external USB hard disk (also 10.6) and ran disk utility.
S.M.A.R.T. reports all ok
Repair disk reports all ok
Repair disk permissions fails with the following error:
Error: Permissions verify or repair failed
I've checked the system.log file and this is the error:
com.apple.DiskManagement.RepairPermissions|2011-09-05 18:15:02 +0100
Sep 5 18:16:38 unknown-c4-2c-03-37-31-6d diskmanagementd[1230]: APICALLBACK_dmAsyncFinishedForDisk_PERM_result dmErr=-9901 detailErr=10
Sep 5 18:16:38 unknown-c4-2c-03-37-31-6d com.apple.ReportCrash.Root[2005]: 2011-09-05 18:16:38.593 ReportCrash[2005:2703] Saved crash report for repair_packages[1996] version ??? (???) to /Library/Logs/DiagnosticReports/repair_packages_2011-09-05-181638_localhost.cra sh
There's other errors in the system.log, but these seem the most pertinent to the problem.
Can anyone please advise on how I repair this, or do I need to buy Disk Warrior and rebuild the directory structure?
Thanks,
GD

Hi,
Thanks for the reply.
Superduper to create a bootable carbon copy and TM for incrementals.
I really don't want to re-install OSX and then recover the components from TM though for several reasons.
Thanks.

Prepping to upgrade from 10.2.8 to 10.4 -- problem with Disk Utility

I have an 17" iMac that I'm preparing to upgrade from 10.2.8 to 10.4. In preparation, I did the following:
* Mounted a new external HD (LaCie) (my second one)
* Backed-up all personal files / folders to the new drive
* Ran Software Update to check for any recent updates - updated iTunes (6.0.3) + an iPod update
* Ran Disk Utility to repair permissions (which I do whenever I've installed or deteted software) -- Have never had any issues, but this is where my problem started.
Repair permissions hangs at the end (status bar to the very end), and it appears to be working on permissions related to iTunes (sorry, will have to run Disk Utility again and follow-up with the specifics). I ran it twice with the same result.
I saw other threads suggesting that the problem may be with the latest iTunes update (recommending moving the iTunes application folder to the desktop and rerunning Disk Utility), but it seems specific to 10.3. Could this be an issue with 10.2.8 as well. If I can successfully complete repairs to permissions (with the above workaround), can I proceed with the 10.4 upgrade, and if so, what should I do with the iTunes application folder (keep it on the desktop, or move it back)?
Thanks

Cornelius ... thanks for the follow-up. I went ahead and tried both methods, although I should note that I didn't show the iTunes.pkg or iTunesPhoneDrive.pkg files in the Library>Receipts folder as described in the two approaches. I had no luck at all with Kappy's solution (I moved the one file I did have -- iTunesX.pkg -- and Disk Utility stalled as before). I moved iTunes.pkg back to its original folder, and tried the first method you described. I moved the iTunes app to my desktop, and I was able to successfully repair permissions. I trashed two files (iTunes3.pkg and iTunes4.pkg) and left the iTunesX.pkg file as instructed (again, I don't show the iTunesPhoneDriver.pkg file at all). I reran Disk Utility with the same faulty result.
I suspect it may have something to do with the missing files. Any thoughts on that?
Thanks again.
Max:
Sorry I misunderstood you. Actually you don't move
your iTunes folder at all. Here are a couple of
procedures. Since I have not had to use it I can't
vouch for either, but I have heard both have worked
for others.Just to catalogue the
solutions listed above
Here's what I did, and it worked fine.
1) Move iTunes onto the Desktop.
2) Run Disk Utility
3) Go to HD>Library>Receipts and trash all iTunes
.pkg files EXCEPT for iTunesX.pkg and
iTunesPhoneDriver.pkg
4) empty Trash.
5) move iTune from Desktop back to 'Applications'.
Hey presto. you should now be able to repair
permissions again.
HTH
Kappy’s solution
1. Navigate to the /Library/Receipts/ folder.
2. Locate the iTunes.pkg and iTunesX.pkg files and
move them to the Desktop.
3. Run Disk Utility and repair permissions.
4. Move the .pkg files back into the
/Library/Receipts/ folder.Note that you
are not moving the iTunes folder, but the .pkg files
from the Receipts folder. In the first method you
Trash some of them, in the second you move them back.
But you don't touch the iTunes application as such.
Good luck.
cornelius
PismoG4 550,
100GB 5400 Toshiba internal, 1 GB RAM; Pismo 500 OS X
(10.4.5) Mac OS X (10.4.5) Beige G3 OS
8.6

Problem with Disk Utility

Hi Boy's and Girl's
Since the 10.5.2 Update My MacBooks Disk Utility takes 20 min. to repair disk permissions. Is anyone else seeing this. Disk utility does not report any problems. But 20 min. seems a bit long to me.
any ideas on what could be happening or how to fix this would go a long way to restoring my faith in
my fellow Mac users. :)!
Thanks!!!

J. E. wrote:
Hi Boy's and Girl's
Since the 10.5.2 Update My MacBooks Disk Utility takes 20 min. to repair disk permissions. Is anyone else seeing this. Disk utility does not report any problems. But 20 min. seems a bit long to me.
any ideas on what could be happening or how to fix this would go a long way to restoring my faith > in my fellow Mac users. :)!
Thanks!!!
Your faith in Mac users? I don't understand.
If taking 20 minutes for permission verification is your major problem, you should be happy.
Just check this board for people with real issues.
Since Leopard, Apple has changed the fundamental way the underlying OS works and permissions are checked in a much more rigorous way. There are complete lists of what the permissions should be (ACLs) and these are consulted as the check proceeds.
On my computer, which is reasonably fast, it takes about 6 minutes. I don't consider it an issue of faith, but I also don't sit around and wait for it to complete. My computer is quite capable of multitasking, as am I, and DU runs in the background.
I hope your post was tongue-in-cheek and not a serious complaint.
Again, look at the real issues posters on this board have.

Problem with Disk Utility and with ITunes and with Classic

Greetings. I have had problems with ITunes recently; when I try to open it, it gives me the error message: "The ITunes Music Library file is locked, on a locked disk, or you do not have write permission for this file."
When I looked at the ITunes discussion section, people had two ideas for other people who had the same problem:
(1) Make sure that the library of music files is write-enabled (which it is) and not locked (it isn't) and
(2) Go to Disk Utility and repair the disk.
Since (1) is not a problem, I am trying (2). However, when I open Disk Utility, it just stays on the window, stating "Gathering disk information..." and proceeds no further.
Perhaps related to these problems, when I try to start up Classic, the window opens, but it gets stuck at the very beginning (stating "Classic starting up using System Folder ...") and proceeds no further.
Can anyone help me with these multiple problems? Thanks in advance.

amandel
The problems you report are different than those relating to the iTunes receipts/DU conflict. Trashing those receipts as suggested is necessary to get DU to repair permissions, but, as I understand it, you couldn't get DU to recognise your drives. And I've seen no posts relating to iTunes 6 and Classic.
I've had the problem you describe before (at least vis-a-vis DU). In principle DU's "Repair Disk" function would fix it, but of course if the disk's don't mount in DU then you can't fix them:)
Therefore fsck is a good solution, or trying DU from the Installer Disk (don't start to install, just let the first installer window appear, go to the menu and choose "Open Disk Utility") and repairing. Then reboot and repair permissions, preferably with DU running from your hard drive.
Maybe you're more of a "don't touch what's still running" kind of person, but it sounds to me like the systems a bit wobbly and needs some tender loving care. You could try a clean up using a program like OnyX as well - it won't do any harm.
Robert
G4 PB Mac OS X (10.3.9)

Having Problems with Disk Utility

Hi Everyone,
Not sure if this is the appropreiate area to post this question but I did not know where else to post it. I tried repairing permissions on my emac and I keep getting an error message saying that disk utility lost conection with Tool Management. Has anyone else had this problem? Do you know what I can do to correct it?
Rob

Try either of the links in this post

Disk Utility Repair Permissions conflict for ./Private and ./private

After applying the latest Security Update 2008-003 (PPC) (http://www.apple.com/support/downloads/securityupdate2008003ppc.html), Repair Permissions in Disk Utility has conflicting requirements for permissions on ./Private and ./private. One of them is wrong. This diagnostic needs to be fixed.

Unless you are using the case-sensitive file system, they are not different directories.
I have not yet installed this update, so I haven't seen this issue. I would say don't worry about it. In over six years of using OS X, I have never encountered anything in Repair Permissions that actually needed to be fixed. But I have seen plenty of nonsense like this, where it references the same file using different names, with different modes associated with the various names.

Disk Utility Repair Permissions ?

Hello,
I'm experiencing a persistent disk permissions repair issue using disk utility.
With each re boot I get the following needing to be repaired...
"Group differs on "private/etc/cups", should be 0, group is 26."
I repair and re-run Repair Permissions again to find all is ok - however it comes back again when I re-boot.
What can I do to get it to go away and what is it?
thank you for your time.

Reports of "spurious" information in Repair Permissions are wide enough that there are Apple articles on the reports for Jag and Panther (like here. Admittedly, they are much fewer in Tiger and Leo.
"cups" is a printing subsystems, so some driver you've installed may be "taunting" Disk Utility. If you can print, you're OK.

Problems with Disk Utility Repairing Permissions

Similar Messages

Maybe you are looking for