Problems with DMProxy (Window Server)
Hi,
I just searched the Web the last days but I don't find any common article or solution to my problem. Since about I think four Weeks my iMac began to fade out the screen I become blue (10.6.8) or black (10.9.1) and I thought it will be because of the temperature (PowerSupply 80 degree, GPUDie 70 degree and CPU 55 degree, but this was since ever if some processes like eyeTV, Chrome, Safari, iTunes, iPhoto running at the same time), or because of an hardware fault of the monitor. But for now I think it is not.
I looked at the konsole and it shows up that every time the screen gets dark for one, two up to ten seconds,the windows server is starting new. But I don't know why.
20.01.14 12:37:46,647 WindowServer[104]: Received display connect changed for display 0x4272340
20.01.14 12:37:46,656 WindowServer[104]: Found 54 modes for display 0x04272340 [42, 12]
20.01.14 12:37:46,681 WindowServer[104]: Received display connect changed for display 0x3f003d
20.01.14 12:37:46,681 WindowServer[104]: Found 1 modes for display 0x003f003d [1, 0]
20.01.14 12:37:46,693 WindowServer[104]: Display 0x04272340: GL mask 0x1; bounds (0, 0)[1920 x 1200], 54 modes available
Main, Active, on-line, enabled, built-in, boot, OpenGL-accel, Vendor 610, Model 9c8d, S/N 0, Unit 0, Rotation 0
UUID 0xeca14e6b808003ccd9650c543aa7e488, ColorProfile { 2, "iMac"}
20.01.14 12:37:46,693 WindowServer[104]: GLCompositor: GL renderer id 0x01022608, GL mask 0x00000003, accelerator 0x00004173, unit 0, caps QEX|MIPMAP, vram 512 MB
texture max 8192, viewport max {8192, 8192}, extensions FPRG|NPOT|GLSL|FLOAT
20.01.14 12:37:46,693 WindowServer[104]: Display 0x003f003d: GL mask 0x2; bounds (2944, 0)[1 x 1], 1 modes available
off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 1, Rotation 0
UUID 0xffffffffffffffffffffffffffffffff
20.01.14 12:37:46,781 WindowServer[104]: Display 0x04272340: Unit 0: Startup Mode 1920 x 1200, CGSThirtytwoBitColor, Resolution 1, ioModeID 0x80001000, ioModeDepth 0x2, IOReturn 0x0
20.01.14 12:37:46,781 WindowServer[104]: Display added
20.01.14 12:37:46,781 WindowServer[104]: Display removed
20.01.14 12:37:46,784 WindowServer[104]: Display 0x04272340: GL mask 0x1; bounds (0, 0)[1920 x 1200], 54 modes available
Main, Active, on-line, enabled, built-in, boot, OpenGL-accel, Vendor 610, Model 9c8d, S/N 0, Unit 0, Rotation 0
UUID 0xeca14e6b808003ccd9650c543aa7e488, ColorProfile { 2, "iMac"}
20.01.14 12:37:46,784 WindowServer[104]: GLCompositor: GL renderer id 0x01022608, GL mask 0x00000003, accelerator 0x00004173, unit 0, caps QEX|MIPMAP, vram 512 MB
texture max 8192, viewport max {8192, 8192}, extensions FPRG|NPOT|GLSL|FLOAT
20.01.14 12:37:46,784 WindowServer[104]: Display 0x003f003d: GL mask 0x2; bounds (2944, 0)[1 x 1], 1 modes available
off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 1, Rotation 0
UUID 0xffffffffffffffffffffffffffffffff
20.01.14 12:37:48,682 WindowServer[104]: **DMPROXY** (2) Found `/System/Library/CoreServices/DMProxy'.
20.01.14 12:37:48,739 WindowServer[104]: Display 0x04272340: Unit 0; ColorProfile { 2, "iMac"}; TransferTable (256, 12)
20.01.14 12:37:48,766 WindowServer[104]: Display 0x04272340: Unit 0; ColorProfile { 2, "iMac"}; TransferTable (256, 12)
20.01.14 12:37:48,782 WindowServer[104]: **DMPROXY** (2) Found `/System/Library/CoreServices/DMProxy'.
20.01.14 12:37:48,842 WindowServer[104]: Display 0x04272340: Unit 0; ColorProfile { 2, "iMac"}; TransferTable (256, 12)
20.01.14 12:37:48,871 WindowServer[104]: Display 0x04272340: Unit 0; ColorProfile { 2, "iMac"}; TransferTable (256, 12)
20.01.14 12:37:54,382 com.apple.usbmuxd[59]: _SendAttachNotification Device f0:cb:a1:68:ab:3c@fe80::f2cb:a1ff:fe68:ab3c._apple-mobdev2._tcp.local. has already appeared on interface 6. Suppressing duplicate attach notification.
So I logged the DMProxy messages and they look like this:
01/20 12:40:48 pid:17898 uid:0 euid:501 Re-Launched with args:-login
01/20 12:40:48 pid:17898 uid:0 euid:501 Launched with args:-login
01/20 12:40:48 pid:17898 uid:0 euid:501 DMProxy lock file descriptor = 3
01/20 12:40:48 pid:17898 uid:0 euid:501 Enable active display aliases01/20 12:40:48 pid:17898 uid:501 euid:0 UpdateSharedDisplayProfiles()
01/20 12:40:48 pid:17898 uid:0 euid:501 ColorSyncProfileCreateWithDisplayID(0x04272340)
01/20 12:40:48 pid:17898 uid:0 euid:501 CGSSetDisplayColorSpaceAndTransfer(0x04272340, "iMac")
01/20 12:40:48 pid:17899 uid:0 euid:501 Launched with args:-discovery
01/20 12:40:48 pid:17899 uid:0 euid:501 DMProxy lock file descriptor = 3
01/20 12:40:48 pid:17899 uid:0 euid:501 Enable active display aliases01/20 12:40:48 pid:17899 uid:0 euid:501 ColorSyncProfileCreateWithDisplayID(0x04272340)
01/20 12:40:48 pid:17899 uid:0 euid:501 CGSSetDisplayColorSpaceAndTransfer(0x04272340, "iMac")
01/20 12:40:48 pid:17899 uid:0 euid:501 Re-Launched with args:-login
01/20 12:40:48 pid:17899 uid:0 euid:501 Launched with args:-login
01/20 12:40:48 pid:17899 uid:0 euid:501 DMProxy lock file descriptor = 3
01/20 12:40:48 pid:17899 uid:0 euid:501 Enable active display aliases01/20 12:40:48 pid:17899 uid:501 euid:0 UpdateSharedDisplayProfiles()
01/20 12:40:48 pid:17899 uid:0 euid:501 ColorSyncProfileCreateWithDisplayID(0x04272340)
01/20 12:40:48 pid:17899 uid:0 euid:501 CGSSetDisplayColorSpaceAndTransfer(0x04272340, "iMac")
01/20 12:40:53 pid:17901 uid:0 euid:501 Launched with args:-discovery
01/20 12:40:53 pid:17901 uid:0 euid:501 DMProxy lock file descriptor = 3
01/20 12:40:53 pid:17901 uid:0 euid:501 Enable active display aliases01/20 12:40:53 pid:17901 uid:0 euid:501 ColorSyncProfileCreateWithDisplayID(0x04272340)
01/20 12:40:53 pid:17901 uid:0 euid:501 CGSSetDisplayColorSpaceAndTransfer(0x04272340, "iMac")
01/20 12:40:53 pid:17901 uid:0 euid:501 Re-Launched with args:-login
01/20 12:40:53 pid:17901 uid:0 euid:501 Launched with args:-login
01/20 12:40:53 pid:17901 uid:0 euid:501 DMProxy lock file descriptor = 3
01/20 12:40:53 pid:17901 uid:0 euid:501 Enable active display aliases01/20 12:40:53 pid:17901 uid:501 euid:0 UpdateSharedDisplayProfiles()
01/20 12:40:53 pid:17901 uid:0 euid:501 ColorSyncProfileCreateWithDisplayID(0x04272340)
01/20 12:40:53 pid:17901 uid:0 euid:501 CGSSetDisplayColorSpaceAndTransfer(0x04272340, "iMac")
01/20 12:40:53 pid:17902 uid:0 euid:501 Launched with args:-discovery
01/20 12:40:53 pid:17902 uid:0 euid:501 DMProxy lock file descriptor = 3
01/20 12:40:53 pid:17902 uid:0 euid:501 Enable active display aliases01/20 12:40:53 pid:17902 uid:0 euid:501 ColorSyncProfileCreateWithDisplayID(0x04272340)
01/20 12:40:53 pid:17902 uid:0 euid:501 CGSSetDisplayColorSpaceAndTransfer(0x04272340, "iMac")
01/20 12:40:53 pid:17902 uid:0 euid:501 Re-Launched with args:-login
01/20 12:40:53 pid:17902 uid:0 euid:501 Launched with args:-login
01/20 12:40:53 pid:17902 uid:0 euid:501 DMProxy lock file descriptor = 3
01/20 12:40:53 pid:17902 uid:0 euid:501 Enable active display aliases01/20 12:40:53 pid:17902 uid:501 euid:0 UpdateSharedDisplayProfiles()
01/20 12:40:53 pid:17902 uid:0 euid:501 ColorSyncProfileCreateWithDisplayID(0x04272340)
01/20 12:40:53 pid:17902 uid:0 euid:501 CGSSetDisplayColorSpaceAndTransfer(0x04272340, "iMac")
I thought it could be the color profile but as I changed it. I had no success the randomize anoying black screen sometimes with three to six times repeating will arise serval times an hour.
So, I changes the OS from good runing 10.6.8 to the experimental 10.9.1 Mavericks (iOS sh.t with no spces etc.) and I installed a 500 GB SSD from samsung to reduce the heat (which brought nothing, because the CPU, GPU and the PowerSupply are the heating reason) but with no effect to the temperature and the turning black of the screen.
the screen also turns black or get a respawn if I turn on the internal fans to "high" so that the upper components cool down to about 40, 45 and 50 degrees. So, it has nothing to do with the temperature. If I have the time I will install windows 7 the next days with bootcamp to determine that it is wether an hardware or an software error/problem. If the iMac don't show the problem on windows it defently ist a software/OS problem.
At that time I am at the end of my knowledge concering the iMac and Apple OS and I hope the somebody could help me. Sorry for my rusty english,
best regards,
Christian Ullmann
P.S.: Allready did that usually stuff like repairing the rights, resetting PRAM etc. ...
The Microsoft article below is useful.
Network Connectivity
http://technet.microsoft.com/en-us/library/cc961803.aspx
Similar Messages
-
Hi all,
From time to time (at least once a day), the following message pops up on the user's screen:
"There is a problem with the proxy server's security certificate. Outlook is unable to connect to the proxy server . Error Code 80000000)."
If we click "OK" it goes away and everything continues to work although sometimes Outlook disconnects. It is quite annoying...
Any ideas?
Thank you in advanceHi,
For the security alert issue, I'd like to recommend you check the name in the alert windows, and confirm if the name is in your certificate.
Additionally, to narrow down the cause, when the Outlook client cannot connect again, I recommand you firstly check the connectivity by using Test E-mail AutoConfiguration. For more information, you can refe to the following article:
http://social.technet.microsoft.com/Forums/en-US/54bc6b17-9b60-46a4-9dad-584836d15a02/troubleshooting-and-introduction-for-exchange-20072010-autodiscover-details-about-test-email?forum=exchangesvrgeneral
Thanks,
Angela Shi
TechNet Community Support -
Problem with upgrade Windows 2003 to Windows 2008
Hi,
I have problem with upgrade Windows 2003 to Windows 2008 R2
When I run installer it check compatibility drivers and programs after that appear message that I need to uninstall "adaptec storage manager" but I already remove this driver from the system and registry.
Any ideas to solve this problem?
My server it's IBM System x3500
RegardsNot sure if this issue was solved or no longer relevant, but I had the same issue with the same IBM x3500 server type.
Based on the SETUPACT.LOG output from the Server 2003 to 2008 upgrade compatibility check, the problem was that the driver AACMGT.SYS is unsigned, and hence not acceptable for running in Windows Server 2008.
AACMGT.SYS is a part of IBM ServeRAID but unfortunately, even the latest versions 9.3 to not seem to update or replace this file. It's also possible this file is a residue of an earlier, deprecated version of ServeRAID, I don't know.
In the end, to get passed the Upgrade check hard stop, I did this, though I'm not sure if all steps are needed:
0. Make sure you have a system backup in case you break something doing this steps. If you do break your system and cannot recover from backups, it's not my fault!
1. Go into Device Manager --> Disks and check the Driver properties for the disks on your system. You might have AACMGT.SYS listed for some/all disks and also listed as unsigned.
2. Uninstall IBM ServeRAID from the system, just in case
3. Do into Device Manager and go under Disks, and manually Uninstall all the disks in the list including "AdaptecArray SCSI Disk" and some other secondary. I did not reboot right away.
4. Go to console, go into C:\WINDOWS\SYSTEM32\DRIVERS, and rename AACMGT.SYS to something else.
5. Reboot the system and hope it still boots. Go into Device Manager -> Disks and make sure that AACMGT.SYS is no longer listed.
6. Run the 2003 to 2008 Upgrade process again. The Compatibility checker should no longer flag "Adaptec Storage Manager" as a blocker. -
Can the problems with the Cirrus server cause this
Hello,
We are have been developing an application using the Cirrus server for two months now and today we are having difficulties with the Netconnection.call method which we use to call the OnRelay method on the other peer. When a peer invokes the call method on his netconnection the OnRelay on the peer is called some of the time (so it is really unreliable).
We are curious whether this could be related to the recent problems with the Cirrus server? If not, what could be a reason the calls are working only some of the time?
regards,
Kevinwhile the problems with our hosting provider are not yet resolved, the cluster should be operating nominally. that should include the proper and relatively reliable functioning of the relay/onRelay function.
note that relay/onRelay is rate limited to about 1 relay every 2 seconds (approximated with a sliding window and about 10 relays every 20 seconds). this rate limit is in place because the relay/onRelay function is expensive to provide and a developer was abusing it. the limit is implemented by dropping relay requests for a time if the rate exceeds the limit point. the limit is per sender NetConnection. -
Sharing an IFS folder on AS/400 with a windows server
Hi to all,
I need to share an IFS folder with a windows server. I have created an AS/400 NetServer file share by using Operations Navigator, with no problems.
From windows server, I create a Map Network drive, setting an AS/400 user and password. Then I can see the IFS folder on AS/400. The problem, is that I only can use that drive when I am logged on Windows server with the user that I have created the drive.
I need that the drive is always available for the windows server, in order that a SAP instance that runs in the windows server can use that drive. I need to use that drive in Tr. OAC0 for Basic path and Archive path.
Perhaps, is there another option of Mapping a network drive?
Some ideas, how I can do that?
Regards
Eduardo Barrios
Compañía Cervecera de Canarias S.A.Hi Eduardo ,
I would think if you set up the network drive with the <SID>ADM user ID or <SID>NN user ID/password, it may be more helpful as the SAP system runs under those user ID's...Creating these User ID on windows with the same user name/password will also help.
But before we get on to that.I believe you are trying to set up DMS/archivelink on a file based system.
Why don't you do it on MAXDB ? That is much more stable and will give you probably better managebility and performance.
In a file system , there would be one folder created for each document..
Its gets messier very easily...huge number of folders..
Just to let you know, content server as far as I know, is not yet supported on iseries.
Thanks
Abhi -
Problems with AOL IMAP server connection on my BlackBerry Z10 STL100-3, and BB PlayBook 64GB WiFi
Problems with AOL IMAP server connection on my BlackBerry Z10 STL100-3, and BB PlayBook 64GB WiFi
Thursday 4:20am EST, 02-19-2015
Hi, My connection to the AOL IMAP server has suddenly failed - Says "Not Connected" on Accounts page
I haven't changed anything and this just started failing this morning.
I've saw same issue on my Blackberry PlayBook 64GB.
Is anyone else recently experiencing AOL IMAP Errors?
Solved!
Go to Solution.Yes! Same thing happened suddenly to my Z10 this morning. No AOL.
-
I can send but cannot recieve email
This is the messege I am gewtting:
There may be a problem with the mail server or network. Verify the settings for account “MobileMe” or try again.
The server returned the error: Mail was unable to log in to the IMAP server “p02-imap.mail.me.com” using “Password” authentication. Verify that your account settings are correct.
The server returned the error: Service temporarily unavailableAlso if I go to system preferences accounts and re-enter the password it fixes the glitch sometimes.
-
Problem with the new server UCS C220 for set IP to CIMC
Hi
We’ve a problem with the new server UCS C220.
We bought two servers UCS C220 M3 for CallManager 8.6 with High Availability.
When we turn on the server during the boot and when it tells us, oppress F8 to enter at the CIMC and set the IP. But it never enters at the CIMC.
Then, we configure our DHCP server and our switch, we connect the three gigabyte ports to our switch to give him an IP to the CIMC, so and then can enter via browser, but neither works.
Note. The dedicated management NIC does not link, the other two ports do make link.
What do you suggest to put an IP to CIMC and start installing our applications?
regardsYou may have noticed that there is no DVD rom on the c220. What you need to do is:
Login into the CIMC from your browser
Luanch the KVM
Insert the VMware DVD in your machines drive
On the KVM pop up there should be a tab to mount the drive, after mounting it click on Macros and choose ctrl_alt+delete to restart.
After the VMware OS installs press F2 to enter IP.
Browse to the VMware ip to download the Vsphere client
Open the Vsphere client, enter the ip of the vmware and the username will be root and no password if you did not set one.
You can now upload OVA templates or manually create virtua machine from this enviroment.
Hope this help -
I am trying to install iTunes on my PC (using Windows 8.1), but I get this error: "There is a problem with this Windows Installer package. A DLL required for this install to complete could not be run. Contact your support personnel or package vendor." The iTunes file (64-bit) I am trying to install, is named "iTunes64Setup.exe". What seems to be the problem? Help!
Hey madnest,
Thanks for the question. After reviewing your post, it sounds like you are having difficulty installing iTunes in Windows. I would recommend that you read this article, it may be able to help you resolve or isolate the issue.
Issues installing iTunes or QuickTime for Windows
Thanks for using Apple Support Communities.
Have a nice day,
Mario -
I keep getting the following error message when I try to update my itunes, "There is a problem with this windows installer package. Aprogram run as part of the set up did not finish as expected. Contact your support personnel or package vendor."
Yes, I had found a similar solution also. I'm running XP Pro, SP3. I went Control Panels/ Add-Remove programmes/apple software update/ change/ repair. Then run the 10.5 exe.
While the programme updated from version 8 of iTunes, my new iTunes is now a mess. Not all of my music was in the same folder previously but it all showed up on iTunes. Now many albums have been left out, some have only a few tracks and some have two copies of some tracks as well as having other tracks missing. I haven't begun to work on that. -
I have Wondows Vista... I tried to upgrade to Itunes 10.5, and received an error orginially stating that I was trying to install a version older than the one I had. I uninstalled all of itunes, and now I'm getting the error message "there is a problem with this windows installer package. Aprogram required for this install to complete could not be run.
Help! I have an IPhone, and I would like to get my Itunes upgraded so I can download the new Iphone software...
Thanks!I have been in touch with Apple support in reference to my problem. We went through every solution available, and found no fix. The tech then suggested I contact Microsoft concerning this issue. I thought that suggestion was just to get me pointed somewhere but Apple. Boy was I wrong!! I contacted Microsoft, and was directed to a free download called Microsoft Fix. This program fixed something in the regisitor, and wala everything was fixed!! I now have I-Cloud and I-Tunes loaded and working well. So, if you can't install Apple Software and are running Window 7 you might give Microsoft Fix a try, it fixed my problem.....
-
I am trying to install itunes 10.5, but during the download I get the following message, "There is a problem with this Window Installer Package. A program required for this install to complete could not be run. Contact your support personanal or package vendor." If this is my personal computer and was able to upgrade to the previous version (pre 10.5), why not now? What is my "package vendor"? And what is it I need to do to fix this? The message is unclear. Unfortunately, I deleted my itunes program, thinking that in doing so, 10.5 would finally load. Now I have no itunes on my computer and unable to sync my iphone. Help!
Thanks - RickHi Rick,
by "repair" I mean I went to the control panel, option - programs and features, and in the list of all my installed programs I selected "Apple Software Update". On top of the screen you find the options Uinstall, Change and Repair. I clicked the repair button and that did the trick. After the repair I could uninstall the program. I also uninstalled iTunes, Apple Application Support, Apple Mobile Device Support en Bonjour, thus all Apple programs. Then I installed iTunes 10.5 again and everything went fine.
Success,
Peter -
Text limits to the "Question" link prevents a full explanation:
This is a long-time problem. I have tried to resolve it with Apple but their "Customer Support" is merely a name.
I can go online and access my e-mail but when I try to send or receive e-mail via iCloud through my internet server (Google fiber now but the same situation existed with my prior service), I receive "There may be a problem with the mail server or network. Verify the settings for 'Apple Email' and try again.
"The server returned the error: The server 'p0-imap.mail.me.com' refused to allow a connection on port 143."
Well, I have verified the setting and tried again and again and …
Well, you get the idea …JungleTaxi Cabbie wrote:
Csound1: iCloud: Configuring Mail with Mac OS X v10.6 or iOS 4
Enter your Incoming Mail Server, User Name, and Password using the following settings:
Incoming Mail Server: mail.me.com
User Name: Your iCloud email address (excluding @me.com)
Password: Your password
Last Modified: Jun 27, 2013
Maybe you should test these things before calling people out, because these settings do function perfectly well.
iCloud is not supported on Snow Leopard or lower, why bother to mention it?
The OP has an iCloud account, and that can not be opened without Lion or Mountain Lion (on a Mac), IOS5 or 6 (on an iPhone/iPad)
The document I linked to is Apples documentation for iCloud on current devices,I don't care whether you believe that you know better than they do, but it will affect the people who follow your advice as it won't work
JungleTaxi Cabbie wrote:
Also, if you're not running Lion or Mountain Lion, there is no "Mail, Contacts & Calendars" prefpane.
I never said that there was, perhaps you imagined it. -
when trying to setup itunes on my pc i get the following message: there is a problem with this Windows installer package. A program required for this install to complete could not be run. How could I solve this problem?
Repair your Apple software update.
Go to START/ALL PROGRAMS/Apple Software Update. If it offers you a newer version of Apple Software Update, do it but Deselect any other software offered at the same time. Once done, try another iTunes install
If you don't find ASU, go to Control Panel:
START/CONTROL PANEL/Programs n Features/highlight ASU and click REPAIR, -
When Upgrading on my laptop from iTunes 10.2.11 to 10.5.0 the message I get is: "There is a problem with this Windows Installer Package. Aprogram run as part of the setup did not finish as expected. Contact your support personnel or pacakge vendor.
After reading all these posts, one by one did not resolve my problem until I got the very end. Regardless of what step would resolve your problem, these are the steps I would recomment to everyone for a what seems to be a safe and fool-proof upgrade to iTunes 10.5.
1. Stand alone upgrade to the latest Quicktime version
2. Go to control panel and "change" then select repair to the following applications in the order specified by the post on Oct 27. (Notice I skipped Quicktime because it had been upgrade manually,and Bonjour did not have a "repair" option)
iTunes; Apple Software Update: Mobile Device Support; Apple Applications Support
Some of these applications may not appear if they do not apply to your configuration (no iPhone, or no iPad, or other apple devices).
Once all updated, I did not need to restart nor launch any applications, I simply went straight into the 10.5 upgrade, and where it normally got stuck, this time the installation continued for a while longer until it completed successfully.
Great work everyone who contributed! Thank you very much!
Maybe you are looking for
-
How to send sap generated invoice numbers using rffoedi1 program
Hi all we are generating PEXR2002 IDocs using RFFOEDI1 program . The program is populating the invoice number field in IDoc with the value from reference number field in MIRO screen. Is there any way that we can populate the SAP generated invoice num
-
Reading the thread JQuery tabs - branching to specific tab It meniotned needs to plug in the Region Static ID. Can someone tell me how to know the region static id ? Looking at my regions , they have seq id but don't know how to find the region stati
-
Air native extensions, includes plist?
I am currently building an ANE for using the External Accessory framework from AIR in order to access and external Bluetooth device. I wrote an xcode library and compiled the ANE which in a sense works quite ok, all logic etc of my classes and method
-
File saving settings. I want to save as ACM Waveform as a default
I want my default save settings to be ACM Waveform, not Windows PCM. I have to load everything I create into a program called NexGen. It's a radio automation system. For some reason it's not taking the Windows PCM from Adobe 3. It was accepting the P
-
Just Moved, Want to Use My e3000 as just an access point NEED HELP
Hey, I just moved into a house the other day, the router/modem is upstairs, my desktop/xbox only has wired capabilities, and my laptop has wifi. I was trying to just make a bridge with my my laptop to my desktop while i try and figure out how to get