Problems with dolby advanced audio driver after upgrade on X230

Hello,
After I downloaded manually realtek audio driver version 6.0.1.6647 and upgraded it on my X230 I get following error:
actual version 7.2.8000.13 of dolby-audiodriver is installed, but the software need driver-version 7.2.7000.7. Please install a correct combination of software and driver.
I found in the net that other users got a similar error on Thinkpad E530 and a conexant driver. There it helped to de-install the driver, no reboot and run the thinkvantage upgrade tool, which repaired the problem automaticly.
I tried it in the same way, but after I de-installed the driver, the upgrade-tool didn't found any upgrade. And I have no conexant driver.
What can I do to fix this error?
Thanks for Help
Martin

Hi mhohhman,
X230 does uses different driver with E530. Please refer followig link for driver.
Realtek High Definition Audio Driver for Windows 7 (32-bit, 64-bit), XP - ThinkPad
http://support.lenovo.com/en_US/downloads/detail.page?DocID=DS029024
Fred
T61 + X201i

Similar Messages

Are you having problems with the Lacie external drive after upgrading to the new operating system

Are you having problems with the Lacie external drive after upgrading to OS X Mavericks?

See here for everyone discussing the issue you are having:
https://discussions.apple.com/thread/5475136?tstart=0

Dolby Advanced Audio driver and Windows 10 for G505

I have just installed Windows 10 to my laptop (G505) and continue to get an error message relating to the Dolby Advanced Audio driver. There are several other similar threads but I can't see an entry that helps me with my model. Is there any action I can take to complete a repair?

I have also continued to work on this problem, without success. I did notice something I will pass along in case it is useful to someone else. I noticed that there are Conexant drivers listed in Device Manager in both AUDIO and in SOUND, video, etc. After installing the suggested update, the Driver version in Audio was updated, but not the one under Sound. I tried having the computer automatically update the one in Sound, but it is still driver version 8.66.4.50. (Meanwhile, the Audio version is 10.0.10240.16384.) Please note that I am doing this on a G580, not a G505. I guess my question is, should the driver versions match--or at least be close?

Dolby Advanced Audio driver on Windows 10

I recently upgraded to Windows 10 on my E531,but now I get a message that the Dolby Advanced Audio driver is missing. How do I download the driver?

Found my Control Pannel [w-10] and noticed 2 Dolby logos.Went to programs & Features: got rid of the old one.This was after Windows had downloaded and installed an update from Conexant [SP]The "can't start Dolby driver" dialogue came up.By getting rid of the old one {Circa 2013] and keeping the newer [ Dolby Digital Plus Advianced Audio ]The dialogue has gone away.Profile Editor appears when i click in the Control Panel.good luck-wbajr tbc

Problem with connecting to free wifi after upgrading to Windows 8.1 from Windows 8

Hi
I had problems with connecting to free Wifi after upgrading my PC(Notebook) to Windows 8.1 from Windows 8. As I travel a lot within europe, I am used to being able to connect to Free Wifi(those that dont need a key or password to enter) but soon after downloading
Windows 8.1 I almost never was able to do this. I'd always get «LIMITED» even though the signal was strong.This was so fustrating,so much so that I reset my PC to clear it of Windows 8.1 and am now back to Windows 8.This is a shame because I was really liking
using Windows 8.1 and if not for this problem(which is a big one) I'd still be using it. If I download Windows 8.1 again from the Windows store what is the probability that I'll have the same problems?
Thanks Portozzygirl

More often than not when a device isn't working it is because the driver has become corrupted. Re-installing a fresh copy should help
http://windows.microsoft.com/en-us/windows7/Update-a-driver-for-hardware-that-isnt-working-properly?SignedIn=1
http://captaindbg.com/how-to-update-drivers-on-windows-7/ (works on win 8 too)
Wanikiya and Dyami--Team Zigzag

Problem with WCS Audit status missmatch after upgrade

We had problem with wcs Audit status missmatch after upgrade to 7.0.164.3 WLC : 6.0.188.0.
how I can fix the problem?

Hi,
Try pinging the WCS from the WLC and vice versa and then try again to refresh config from controllers.. then follow the below if its still not happening..
Please forwrd the trace level logs from the WCS (Specifically WCS0.0.TXT logs) while recreating the issue!!
Regards
Surendra

Acer Aspire V5-531 Dolby Advanced Audio driver issues after updating to Windows 10

After upgrading to Windows 10 I was getting an error on loading Windows media player which indicated that: The current Dolby audio driver version is 7.2.8000.17 and the softwareapplication expects driver version 7.2.7000.7. Please install a valid driver and application combination Although Windows 10 has probably updated your driver to the latest version of the driver (you can check this in device manager for yourself) but the Dolby Advanced Audio V2 application which was supplied by Acer (not Dolby) has not been updated to the corresponding latest version. So, you need an updated version of Dolby Advanced Audio V2 (Version 7.2.8000.17) Acer have not published an updated version. Looked all over the site coudn't find it. My solution was to remove the error was to uninstall the Acer version and replace with the correct version downloaded from the Lenovo site below. http://support.lenovo.com/us/en/downloads/ds028945 I'd wanted to make sure it was the same software, so I tried without uninstalling first and it refused as a version was already installed. So that was reassuring. Thanks for the archived post below pointing me to the softwre on the Lenoveo site at the Lenovo site. I'd looked all over the Acer site for it. http://community.acer.com/t5/2013-Archives/how-i-solved-the-dolby-realtek-audio-problem/td-p/103157 There are warnings on the page above not to use the Lenovo version of the software because of 'tuning', but my audio sounds just as good as before and the error is now gone. Without it the Dolby would have been uninstalled so it seemed a reasonable punt to me. Disappointed in Acer, will buy a Lenovo next time...

Hi, The only driver that ever worked properly with Dolby was the driver for The V5-552G on windows 8 (not 8.1) This will work on your computer even if different model... the new driver on the Acer site for winodws 10 has not work either. So the one I´m using is: Audio_Realtek_6.0.1.6878_W8x64_A To Download the Driver and Software needed Go to: http://www.acer.co.in/ac/en/IN/content/drivers and Go: Ultra-Thin / Aspire / V5-552G To get dolby to work: 1. Uninstall the current driver, and any software related to it (the dolby software) 2. restart 3. Install the driver for windows 8 (in my case it never installs dolby automatically, I´ll explain how to do it manually below) 4. Restart twice (yes, I always had to restart twice after the install otherwise manually installing dolby would not work and I got an error when trying to run the install) 5. In the driver folders you downloaded and unzipped go to the folder "PCEE4" and run "DolbyAdvancedAudio.msi" 6.If you dont get the "Install PCEE" error, restart and you should be able to enjoy dolby (when its not acting up). If you get the error then you may have not followed the instructions properly. Go back to step 1 Good luck

Dolby Advanced Audio driver and Windows 10 for G480

So I've recently upgraded to Win 10. I have no problems so far except for the sound. The Dolby Advanced Audio software seems to be not working. Any suggestions?

I have also continued to work on this problem, without success. I did notice something I will pass along in case it is useful to someone else. I noticed that there are Conexant drivers listed in Device Manager in both AUDIO and in SOUND, video, etc. After installing the suggested update, the Driver version in Audio was updated, but not the one under Sound. I tried having the computer automatically update the one in Sound, but it is still driver version 8.66.4.50. (Meanwhile, the Audio version is 10.0.10240.16384.) Please note that I am doing this on a G580, not a G505. I guess my question is, should the driver versions match--or at least be close?

T430 with dolby advance audio v2

can i download dolby advance audio v2?
i jush have uninstall it and now i'm felling stupid.
my thinkpad is t430-2342
Solved!
Go to Solution.

Hi,
Try installing the Realtek Driver and reboot the system.
Open your C: drive and search for "dolby" in the search bar. It brings up an installer called “dolbyadvancedaudio.msi”. Run the installer and check if the dolby advanced audio application comes back.
Best regards,
Mithun.
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Problems with result area in workbooks after upgrade to BW 3.5

Hi,
we are experiencing some problems with our <b>workbooks</b> after the upgrade to BW 3.5. When refreshing all queries in a workbook (that was there before 3.5) without selecting a specific query we get the message <b>'Result area</b> cannot be found, specify a new one'. After selecting, the message appears again in an infinite loop.
Has anybody had similar problems and has found a solution for this?
Thanks,
EMS

Hi,
I am having that message, always if I delete a Sheet which contains an embeded query.
Even the sheet is deleted, the SAPBEX has information of all the embeded queries, and tries to find the Result area to put the data.
To find out if this is your case as well,
select an empty cell in a Sheet and continue like that, until all the embeded queries are been displayed.
Regards
Vasso
Message was edited by: VASSILIKI SIAGRI

I have a big problem with Lion and PGP. After upgrading from snow leopard to lion I cannot access my PGP drive which was generated under snow leopard. PGP does not start but gives a notion that lion cannot work with my PGP version. Solution?

After upgrading from Snow Leopard to Lion I cannot access a PGP drive which was generated under snow leopard. PGP does not start. When I try to start I just receive a message that Lion cannot work with PGP. How can I now access important and confifential informatio which I have stored in PGP (snow leopard). Do I have to move back to snow leopard. If so, how can I do this?

If you have this product,
http://www.symantec.com/business/support/index?page=content&id=TECH165159
you have to go back to Snow Leopard.
To re-install SL, back up your home directory, format and re-install.

Problem with scanning in Photoshop CS6 after upgrading to Mountain Lion

After upgrading to latest version of Mountain Lion i've got a problem with scanning directly into Photoshop CS6.
on the previous Lion version when I wanted to scan something, i just opened Photoshop -> File -> Import -> images from device
then a new window opened up the ImageCapture app where I could choose the device I wanted to use, and then I selected the scanner (Canon CanoScan 8400F) and I could scan directly into photoshop.
Now with Mountain Lion when I do the exact same thing, it opens a window, but it's impossible to select any device, as the new window is just a plain white window, with 2 buttons on top to rotate something that isn't there. (text is in dutch, cause I'm from the Netherlands)
hope someone can help me out.
I can scan with the use of the ImageCapture app without problems and then save that picture and open it in Photoshop, but it has worked before, so am I doing something wrong? or is this just a little bug
thnx in advance for the help

I’m having the same problem with my Epson Perfection 3200 Photo scanner and Adobe Photoshop CS6. It does the initial overview scan then I get the same blank window as BigNoud shows above. I've done a Software Update and have also updated OSX to 10.8.1.
I know for the Epson you can get a Mountain Lion compatible scan software from SilverFast for about $35.00 as an upgrade here.
I haven't gone that route yet as I don't want to give up any more money for my Apple/Adobe experience.
Any help would be appreciated.

Problem with ADF Security / SQL Authenticator after upgrade to 11.1.1.6

Hi,
We have an ADF application built with JDeveloper 11.1.1.2 that's been in production for a couple of years. Now we are in the process of upgrading to 11.1.1.6 so I have upgraded WLS and ADF in a test environment and re-deployed the application there. The application uses users and groups from database using SQL Authenticator configured in WLS. This worked fine in the old version but now after the upgrade we can't log in with credentials from the database. I can log in if I add a user to the default authenticator. We didn't touch any of the authenticator settings or security realm configurations during the upgrade. Both authenticators are marked as SUFFICIENT, as they have always been.
Has something changed in the way SQL Authenticator is used since 11.1.1.2? What could be the problem?
Regards,
Joonas

Answering myself here: after recreating the SQL Authenticator and the ADF Security configuration logins are working again. Don't know where the problem was though.

Missing audio driver after upgrade/Skype install

Hi,
A few days a ago I fresh installed Arch 64b/KDE 4.5.1 on a new PC and fully updated it.
During the installation, I remember alsa has worked fine
Yesterday I've installed Skype from repositories (inc 32b libraries), and upgraded to x-server 1.90 (as part of a full upgarde).
Ever since, upon login KDE complaints about a missing audio device (which it did NOT before), Skype offers only Pulse audio (and does NOT work), and my on board audio driver is missing.
Although on-board audio IS ENABLED at the BIOS, the on board audio modules are NOT loaded as indicated by the following:
lspci | grep Audio
00:14.2 Audio device: ATI Technologies Inc SBx00 Azalia (Intel HDA) (rev 40)
01:00.1 Audio device: ATI Technologies Inc Redwood HDMI Audio [Radeon HD 5600 Series]
(I've an ATI 5600 PCIe graphic card which includes also an HDMI output, and an on-board Realtek ACL 889 audio controller).
Please advise how to restore full audio functionality from on-board controller?
Thanks!
MoBo is Gigabyte GA 890FX UD5

Hi mhohhman,
X230 does uses different driver with E530. Please refer followig link for driver.
Realtek High Definition Audio Driver for Windows 7 (32-bit, 64-bit), XP - ThinkPad
http://support.lenovo.com/en_US/downloads/detail.page?DocID=DS029024
Fred
T61 + X201i

Dolby Advanced Audio driver for hp Pavilion dv6-3150el on Windows10

Like from the title, i upgraded my pc to windows 10, but the application IDT for audio control has lost the option for the dolby setting. There is a driver or an update, for reactivate those settings?

Please Take a look at my Post it may help you out. http://h30434.www3.hp.com/t5/Notebook-PC-Sound-and-Audio/Windows-10-IDT-High-Definition-Audio-Driver-Bug-Report/td-p/5175005

Problems with dolby advanced audio driver after upgrade on X230

Similar Messages

Maybe you are looking for