Problems with Draft - Inventory Transfer - SDK 2007

Hi all, I have problems making a Draft document of a Inventory Transfer using the DIAPI, I know that the draft of inventory transfers is new in SBO 2007 and I have the correct version of the DIAPI installed, the problem is that I can't find the property "FromWarehouse", into the Draft Object.
Thanks for help.

Note that the header of this forum specifies:
This forum is dedicated to development and deployment of .Net applications that connect and interact with BusinessObjects Enterprise, BusinessObjects Edge, or Crystal Reports Server. This includes the development of applications using the BusinessObjects Enterprise, Report Application Server, Report Engine, and Web Services SDKs.
I do not think your query concerns any of the above mentioned products? If that is the case, please post to the correct forum.
Ludek

Similar Messages

Has anyone had a problem with Draft Emails getting sent with Mac OS 10.8.2? It just happened to me and sent a few drafts out to a potential employer I planned on sending out torrow.

Has anyone had a problem with Draft Emails getting sent with Mac OS 10.8.2? It just happened to me and sent a few drafts out to a potential employer I planned on sending out tomorrow.

Hi, one question & one suggestion...
What possible things are connected at home but not at the store, inlude every cable, etc.
One way to test is to Safe Boot from the HD, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, Test for problem in Safe Mode...
PS. Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive
Reboot, test again.
If it only does it in Regular Boot, then it could be some hardware problem like Video card, (Quartz is turned off in Safe Mode), or Airport, or some USB or Firewire device, or 3rd party add-on, Check System Preferences>Accounts>Login Items window to see if it or something relevant is listed.
Check the System Preferences>Other Row, for 3rd party Pref Panes.
Also look in these if they exist, some are invisible...
/private/var/run/StartupItems
/Library/StartupItems
/System/Library/StartupItems
/System/Library/LaunchDaemons
/Library/LaunchDaemons

Problem with battery for MacBook Pro 2007

I have a problem with battery that was replaced during video card service 1.5 years ago
Battery health was around 80% and it stopped to work, I continued to use notebook with power cable and after week the battery become like this!
spoke with person in Apple store and got answer that it is not covered by Apple and I will need to buy another new battery.
For me it looks like manufacturing problem and I'm not expecting that after 1 year my battery will die like this! Thanks that it didn't explode!
What I should do in such case?

Thanks for your reply!
All my battery story is ending with bad taste...
I always relied on quality of the Apple products, it brought me to change all computers and phones to Apple brand. I was ready to pay extra for their products...
This battery has an Apple brand on it and I'm expecting that Apple will take some responsibility for it.
First battery on my MacBook Pro 2007 worked without any problem for 4 years, then it was replaced by Apple service tech person for unknown reason. This "new" battery failed just after ending of 1 year warranty coverage and even deformed in such scarry way. And now I don't have any option to ask if there is possibility that I'm experience a manufacturing defect! And I know that it is possible, internet is full of negative comments for these batteries!
Now I'm asking myself again, if it worst to buy Apple products? Are these products have proper quality?

Problem with the XML in Word 2007 (Word Template)

Hi Experts,
i am new on CRM 2007 and i have a problem with the XML Structure of the Word Template.
First i built a Web Service Design Tool. Then i saw on the Testpage, that it works.
So i started the Document Templates and created a new Template. Object Type was BUS2000126 - CRM Business Activity. Web Service was my created and tested Web Service Tool.
As i opened the Word 2007 with the XML-Structure, i recognized, that there was something wrong.
The Responce on my Testpage from the Web Service Tool had the following structure:
response (test.types.p1.CrmostZlaWord5ReadResponse)
   Output (test.types.p1.CrmostZla010RoszlaWord5001)
        ZlaWord5 (test.types.p1.CrmostZla010Rosbtorder)
            Administrativeheaderoforder (test.types.p1.CrmostZla010Rosbtorderhea001)
                 Partiesinvolvedofheader (test.types.p1.CrmostZla010Rosbtheaderpa001)
                     Allpartiesinvolved (test.types.p1.CrmostZla010Rosbtpartnera002[]) Displaying 3 elements of 3
                          element1 (test.types.p1.CrmostZla010Rosbtpartnera002)
                               Btpartneraddress (test.types.p1.CrmostZla010Rosbtpartnera001)
My Problem is now, that the XML-Structure got not that point "element1".
Instead of "element1" there is the point "item" in my XML-Structure in Word 2007.
I guess that is the Problem why i am not getting the fields of the Btpartneraddress filled in my Word.
Can anyone help me? Or put me in the right direction that i can change the XML?
Thanks for your help
André

Hi andré, I guess the issue is coming from the fact that you selected "AllPartiesInvolved" and that may contain any numbers of entries. So when you test your webservice, you put a key and then get a result for that key, and in that case you might get "element1" until "element3" for example if there was 3 partners involved in you activity.
But, when you design your template, you don't have a key at that moment, so in the Web Service structure, you have "items" which stands for all the possible entries you might retrieve at runtime. I guess you could use an index in your template to specify which item you need, but this is quite hasardeous, so i would be you, I would not design my web service to use "AllPartiesInvolved" but rather a specific Partner type like contact person for instance.
Regards,
Xavier

Having problems with OPA 10 and office 2007 templates

Hi,
I have a OPA 10 and office 2007 set up which is having some issues with the macros. Seems to me that the visual basic code is not kicking off really well sometimes. I am trying to map the sequence which leads to the errors and I believe that the issue is around opening an old word doc which has a old template version (.dot). This may be the cause for OPA getting lost when working with word 2007.
For example, I ask to open a rules doc and the visual basic tells me that OPA couldn't open the doc but word is opening the doc anyway. However none of the toolbar commands work as well as I can 't save the doc etc.
Have you experienced any issue with OPA 10 and Office 2007? Any special word configuration? Should i go back to office 2003?
BTW, I have both dotm and dot templates loaded as add-ins in word. The dotm toolbar looks good but the dot toolbar is a bit strange in 2007.
Cheers,
Paulo

Hi Paulo,
Have a look at the following tips from Davin Fifield about troubleshooting the toolbar.
Sometimes when using Oracle Policy Modeling, Microsoft Word documents that are part of a Policy Modeling project may appear without the OPA toolbar (in Office 2003) or OPA options on the Add-Ins ribbon (in Office 2007) when opened in Microsoft Word.
This problem can be caused by various factors.
Here are the top three troubleshooting steps to try to recover from this situation.
1. With your project open in Oracle Policy Modeling, run Update Oracle Policy Templates from the Tools menu. This will attempt to make sure the correct Word template is attached to each project Word document that is not currently excluded from the build. Open a Word document to see if the toolbar/ribbon is now displayed correctly. If not, continue to step 2.
2. Try changing the UI language for your project. To do this, choose Options, from the Tools menu in Oracle Policy Modeling. Select Environment. Selet General. Under Authoring UI Language, choose a language other than your preferred UI language, and click OK. Then repeat these steps to revert to your preferred language. Open a Word document to see if the toolbar/ribbon is now displayed correctly. If not, continue to step 3.
3. Open one of the Word documents in your Policy Modeling project. Run the macro UpdateToolbar: In Word 2007, choose the View ribbon, then select Macros/View Macros, highlight the UpdateToolbar macro, then choose Run.
Does this resolve your issue?
Jasmine

Solved synch problem with iphone 2.0 outlook 2007, win XP Pro and Mobile Me

I've been struggling with this mobile me business, and I hope that I solved it for me and therefore for you. I have the components listed above. I noticed that my iphone was no longer synching to outlook '07. Can't remember if that was before or after I updated to iphone 2.0 Regardless, neither the dock nor the mobile me synch worked. ( It would go through the motions of the synch, but then when I went to look at the phone, it had not changed at all. )
In reading the posts, it appeared that all of the solutions pointed toward a corruption in the pst file. Most of the solutions are based on the fact that there is some item in the calander section ( or the contacts) data that is corrupt. Fortunately, I have a proprietary calander in my office and I use outlook as the conduit for getting that info onto my iphone through itunes. So, I deleted all of the appointments in outlook and then tried to synch a blank outlook with the iphone and it worked! So, all I had to do was then resynch my office proprietary software back to outlook ( which worked ok) and now it's working fine. In fact, that solved the mobile me issue as well....
So, I hope this helps you out there..eveyone's case is different, but it does appear that if you've reinstalled itunes, reinstalled outlook and tried everything else, that the problem resides in the pst file and there is some appointment or contact that itunes does not like.
Hope this helps.

Hi skoppang,
Welcome to the Apple Support Communities!
I understand you are having difficulty syncing your contacts and calendars from Microsoft Outlook 2007 to your iPhone 4s. There may be a few different steps to complete to help isolate and resolve this. Please use the following article as a reference.
Troubleshooting Sync Services on Windows with Microsoft Outlook 2003, Outlook 2007, or Outlook 2010
http://support.apple.com/kb/TS2776
Have a great day,
Joe

Problems with my Ipod, transfer from Ipod to computer.

I have problems to get my files from my Ipod to my computer, after i had some problems with the computer and formated it.
Now i can't get any songs from my Ipod to my computer.
BUt i can do it the other way, from my computer to my Ipod.
I hope there is someone that can help me, since I did transfer all my music from my computer to Ipod before formating it and now i can only play it on my Ipod. To bad if you ask me and i do not want to loos all my music.

I did try, but then i might loos all that i do have on my Ipod and that would be very bad. So the problem is still there and i do want to keep all that i do have on my Ipod.
Since i have bought all of it from I tunes and i have formated my computer and lost all of it from that one, then i did transfer all to the Ipod to save it, but now i can still only play it on my Ipod.

Problem with itunes file transfer.

hello,
l recently purchased another PC windows 7 64 bit. l installed Itunes 64bit . l have a problem when trying to transfer files (video or any other) from my pc to my ipad using Itunes; it freezes and crash. l am using and app called EZ file which plays any video file not that l think that does matter.l never had any issue with it. l used another PC to do the same thing and it worked. l try re-installing Itunes but it does the exact same thing.
this is the error message that i get;
Problem signature:
Problem Event Name:          APPCRASH
Application Name:          iTunes.exe
Application Version:          10.6.1.7
Application Timestamp:          4f71aced
Fault Module Name:          objc.dll
Fault Module Version:          1.435.16.11
Fault Module Timestamp:          4ee7d01f
Exception Code:          c0000005
Exception Offset:          000085f4
OS Version:          6.1.7601.2.1.0.256.48
Locale ID:          1033
Additional Information 1:          0a9e
Additional Information 2:          0a9e372d3b4ad19135b953a78882e789
Additional Information 3:          0a9e
Additional Information 4:          0a9e372d3b4ad19135b953a78882e789
any thoughts??

In iTunes, Advanced>Create iPod or iPhone version

7914, Problems with "Hold" and "Transfer" appearance

We have a site that is experiencing problems with the line appearances on the 7914s that the assistances have in order to view their manager's extensions.
The Line text label is configured for "Name + DN" so the assistant can keep track of the lines when they ring and the CID appears next to the LTL.
When the call is picked up via the 7914 and transfered, the line text label on the other 7914's in the office change from displaying the "Name + DN" to the name of the person who transfered the call.
This is very confusing for the staff who is trying to keep track of the calls and who they are for.
Is there any way to prevent this from happening, or alternatively, to have line text label appear ALL the time and never CID or the transfering partys name appear??
Thank you for any help or assistance with this!

Any ideas? I'm guessing this is a "feature" that cannot be changed?
Thanks

Problem with Log and transfer using AVCHD

Hello,
I was wondering if I can get help. I use a Canon Vixia HF S200 and FCP Version 6.0.6
I have produced projects on my MacBook Pro 2.33 Ghz Intel Core 2 using this process before with no problems in the past. This problem just started and I dont know what has changed. When I open the Log and Transfer (LT) window I can see and hear all my video from the AVCHD folder in my harddrive just fine, I can scrub with no prob.... But when I add clip to Queue I get an red circle with exclamation on my status.
I have changed the settings on the preferences to Apple intermediate Codec and the audio to plain stereo.. no luck there, the video still will not transfer to my bin.
I have made sure that the toggle Queue state was the little arrow instead of the paused icon...no luck there either... i got a message that says clip queued transferring but nothing is happening.
I will appreciate your help!
Also I didn't mean to tread jack earlier, please accept my apologies, if anybody saw that...

OK!!!!! This seriously cost me 1 day of my life that I'll never get back!!! lol
So I was able to bring the footage in on to Imovie...Yes, I was that desperate...deadlines do that!
Edited the entire project there...kinda sucked...
Then I had the bright idea that if I was able to bring the videos in to Imovie, on my local HD...than something may be wrong with my scratch disk that I use on FC...its a USB disk, specs =slow.
So I changed the scratch disk and yes "Davi S" for good measure I also deleted the Pref files.
So it working again...here I go editing on FC after I edited the entire project on Imovie...
Thanks for all your help!

Hotsync problem with Windows 7 and Outlook 2007

Hello,
I try to make contact between my Palm Tungsten E2 and outlook 2007 on my laptop with Windows 7 for synchronizing.Before this, I worked on this laptop with Windows Vista and also Outlook 2007.I installed the standard software and after that the update for outlook 2007 (palmoutlook2007conduits.zip (7.2MB)).In Vista this was working well, but not in Windows 7.I can see in the soft ware part that palmoutlook2007conduits is installed, but the in the log book I still have the same errors :
- Not Synchronized
Outlook Contacts synchronization failed
When I go to the settings, also there is the same error : “This version of Outlook is not supported by the Outlook Conduit application. Supported outlook versions are Outlook 98, 200, XP(2002) and 2003.”. It looks like the upgrade with palmoutlook2007conduits have no effect in Windows 7.
I hope someone have a solutions for this problem.
Post relates to: Tungsten E2
Post relates to: Tungsten E2

My new computer came with Windows 7 64-bit, and I need to HotSync my Tungsten E2 with Outlook 2007. Did anyone find a way to do this?

Stability problems with Microsoft PlayReady Client SDK for Android v 3.0

Hi,
We have begun working with the Microsoft PlayReady Client SDK for android v3.0 and on android 4.4 + we are experiencing the following problems on a nexus 7 (Android 4.4.4) and another nexus 7 (Android
5.0)
Doing a seekTo(new position), getDuration is returning a wrong value.
Changing audio on .ismv with multiple audio tracks results in bad/random performance on progress of the video and general instability in playback
Are these known issues and if so is there a known workaround or a scheduled date for a fix?
Thanks

Please email [email protected] for this question. Azure Media Services doesn't provide client SDK.Thanks.

Problem with Physical Inventory

Dear Expert
Im getting following error with Transaction code LI11N ( Enter Physical Count)
Default values for this storage type are not maintained
Message no. L4036
Please help in this regards
with best regards
Suman

Hi ,
For warehouse and storage type default values has to be maintained in IMG , Try maintaining default values for physical inventory in IMG under below path :
IMG > Logistics Execution >Warehouse Management >Activities >Physical Inventory >Define Default Values
Kindly revert if you are facing any problems after this.
Thanks
Jinoy

Java corba ID CS5 7.0 Problem with table format import excel 2007 document

hello,
I want to import an excel 2007 document with a table into a textframe. This is the code to set import preferences:
ExcelImportPreference pref = aplicacion.getExcelImportPreferences();
pref.setTableFormatting(kTableFormattingOptionsExcelFormattedTable.value);
but when I insert the file into de texframe and export in a pdf file i lose the table format, always apply this format: kTableFormattingOptionsExcelUnformattedTabbedText.value.
This problem only happens with excel 2007. Excel 2003 files the import is ok.

Apart from iTunes (which I rarely update since we never use it) they both had a Java update, which I'm installing now but I can't imagine that's connected (plus they both didn't have it). Both Macs are 10.6.8.
I also repaired the permissions and cleaned caches on Friday. Today I created a new user/profile and tried the same thing on that. No luck.

Problems with IPhoto after transfer from Mobile Me

It seems that most of the necessary transfer out of of Mobile Me was accomplished, but I am still somewhat confused where my Gallery went to and now my IPhoto program keeps telling me that it is synchronizing to my service provider (Comcast), but it has been going on forever and I wonder if that is a necessary function? I chatted with the support team of ICloud, but they had no answer. Can anyone help?

Hello sean:
I am not an expert in iPhoto, but people who post here are:
http://discussions.apple.com/category.jspa?categoryID=143
To try to address the browser problem, reset Safari and see if that helps. Also, try an alternate browser (I use Firefox that way) to see if the problem is system-wide. Also, there is a Safari forum here:
http://discussions.apple.com/category.jspa?categoryID=169
Barry

Problems with Draft - Inventory Transfer - SDK 2007

Similar Messages

Maybe you are looking for