Problems with driver in microsoft windows vista

I speak of Brazil, I have a smarthfone BlackBerry 8100 and a Dell Inspiron 1525 notebook with Windows Vista 32-bit, Service Pack 1. I'm having problems with "Bluetooth peripheral device" and the solution of the problem indicates to contact with RIM to find and properly install the driver of that device. How did attempt to resolve the download of the BlackBerry Desktop Software v4.7, but said, I want to get a resolution to the problem. No more, thank you now.

> What can we do?
Let your Cisco rep know that this is an important feature. The word I have is that stateful firewall is not in the Vista feature set for Cisco.
The readme for the Cisco VPN client 5.0 bears this out:
Known Issues:
CSCsh02887 Vista: Stateful firewall does not start.
CSCse44616 Vista: VPN Client should not install Zone Lab Firewall on Vista platform
CSCsf07334 Vista: Stateful Firewall Not Supported on Vista VPN Client

Similar Messages

  • Problems with airport extreme and windows vista

    Hi, I have windows vista and I'm having problems conecting it to air port extreme. The only way I can make airport extreme work is to disconect and reconect the powercord and then my computer reconizes it.
    Any sugestions would be helpful.

    I just got off the HP "chat" technical assistance about my HP DV6500z doing this same thing. At least for my model there is an October BIOS update. She had me re-install the Broadcom drivers and run the BIOS update. Now the whole computer runs faster in addition to connecting wirelessly! Not only that, I can use the "closed" network feature through the Airport Utility to hide my network as I did in the past and the PC finds it! I guess through all of the very testy notes on HP's discussion board they finally came through (well, at least on this model). My model has the AMD processor so if yours is Intel it may not be the same. I recommend going to their TA chat line or type in your model on their Software & Driver page to see if there is a recent revision on your models BIOS. The one I downloaded was dated 10-2007.

  • Activation problem with Acrobat V7 on Windows Vista

    I recently purchased a new computer with Windows Vista Home Edition pre-loaded. I then installed my Acrobat Version 7 software which had been installed and operating trouble-free on my old Windows XP machine. Everything seemed to install OK but then when I tried to use the software an automatic pop-up appeared saying I could not activate the product because I was not logged on as the Administrator. When I check my user identity in Vista I am logged on as the Administrator and I am the only user.
    When I then tried to activate by phone the Adobe individual was clueless as to what the problem was except to say there are compatibility problems with V7 & Vista and suggesting I hand over another $99 to upgrade to V9 - something I am not enthused about since I already paid $299 only 2 years ago.
    Suggestions?

    Vista requires AA8.1 at a minimum. I think that a few have gotten AA7 to work, but it is not supported by Adobe on VISTA. I know that is not good news, but it may be that you will be unsuccessful. At the very least, expect to have to print to file and open distiller to complete the conversion. I think that AcroTray is one of the major problems with the use on VISTA.
    Hopefully someone might stop by that has successfully gotten over the registration problem you are having, and possibly gotten AA7 to work in some sense on VISTA, but do not be surprised if there are no takers. Good luck.

  • Problems with Zen Touch on Windows Vista (64-B

    When I connect my Zen Touch to the PC Vista can't find drivers so it tries to install the MTP-Driver but the classinstallationprogram have declined the installation.
    http://img80.imageshack.us/img80/8555/errorhx5.jpg (sorry, it's in german)
    How can I install a driver for the Zen Touch?

    Noone with the same problem and an idea how to install the driver?

  • Problems with photoshop CS4 in Windows Vista 32 bits

    I have installed Photoshop CS4 in Vista Ultimate 32 bits, in the installation i don´t have any problems.
    When click to run Photoshop, Vista launch a message saing me to close de application, so i can´t start Photoshop.
    Then i update de drivers of my Graphics card (ATI HD2900), and i try to start photoshop with the new drivers. The photoshop starts without problems.
    I open it and i click in the right pane of styles, and Windows launch another message to close de application.
    After that i start Photoshop and i read a message that says that Photoshop have desactivate the aceleration of GPU because there were some problems.
    I go to the menu of performance in settings and Vista launch another message to close de application when i click in performance to open the settings.
    Then i try to open another time the application and i try to open a *.png image file and i paint something in it, then i click in the "X" to close, but the application doesn´t close (i prove with "X" of the application and with the "X" of the image tab). I have to close it with de Task Manager.
    Then i try to open a *.jpg image file and Vista launch another message to close the application.
    I don´t know the reason of these problems, i´m trying to find something in internet.
    I hope you can help me to resolve this problems, i need photoshop.
    Thank you in advance.

    Have you checked that the files actually "belong" to anyone? If you reinstalled your system recently, they may have invalid security descriptors. Try to check. Right-click one of the offending files, choose "Properties", then go to the security settings tab. You should at least see 3 entries (Administrators,[your user name], System). If you see additional entries only consisting of numbers and letters, uncheck the "inherit parent folder settings" option, choose to copy all permissions in the prompt that comes up, then delete those invalid entries. In addition, you may need to set a new owner in the "Advanced" options (it should however default to Administrator after the previous steps)...
    Mylenium

  • Problems with 10.7 on windows vista

    Hi
    Today i downloaded iOS 6 on my iphone 4s successfully, although all my apps have disappeared.  I went to sync on itunes and I hadn't been able to downlad 10.6 a few weeks ago.  Today it wouldn't let me sync phone as it requires 10.7, but laptop won't let me download this either.  I tried to uninstall itunes, but won't let me do that either.  I've tried downloading form itunes website, but no joy.
    the message is 'errors occurred whilst installing the updates. If the problem persists, choose tools, download only and try installing manually'.  I've tried and this doesn't work either!!
    Please help

    'Error writing to file C:\Config.Msi\7b0bb7.rbf. Verify taht you have access to that directory' ??
    Are you running some kind of real-time backup service or utility on the PC?
    (The \Config.msi\ folders are temporary structures created on the PC during an install using Windows Installer. If a back-up utility grabs a file in there to do a copy at the wrong moment, that can interfere with an install.)

  • HT1178 Can the time capsule be used with a pc running Windows Vista , 7 or 8 as a backup drive

    Can the time capsule be used with a pc running Windows Vista , 7 or 8 as a backup drive. If so what software do I need to buy?

    Can the time capsule be used with a pc running Windows Vista , 7 or 8 as a backup drive.
    Yes, on XP, Vista and 7. Have not tried 8.
    If so what software do I need to buy?
    Genie Timeline Pro does a very nice job...and it is similar to Apple's Time Machine.  It's not cheap though.  Check with the Genie folks for more info and compatibility with Windows 8.
    Genie Timeline Pro | Overview | Time Machine Backup Software for ...
    Other users may have some other suggestions.

  • Troubleshoot installation problems in Photoshop Lightroom on Windows Vista

    This document can help you to resolve system errors that occur while you use Adobe Photoshop Lightroom on Windows Vista. System errors can manifest in many different ways, including (but not limited to) the following:
    A blank or flickering dialog box
    A frozen cursor or screen
    A blue screen
    An unexpected restart
    An error message such as:
    "Setup is unable to load the installation script file."
    "Unable to create a directory under C:\Windows\System. Please check write-access to the directory."
    "Uninstalling: C:\Program Files\Adobe\Adobe Photoshop Lightroom refers to a location that is unavailable. It could be on a hard drive on this computer, or on a network. Check to make sure that the disk is properly inserted, or that you are connected to the Internet or your network, and then try again. If it still cannot be located, the information might have been moved to a different location."
    Note: If you attempt to install Photoshop Lightroom to a drive that doesn't have the minimum required space available, the installation will fail. You must then completely reinstall to another location that has sufficient free space.
    Many different factors can cause system errors, including conflicts among device drivers, applications, operating system settings, hardware, and corrupt elements in specific files. Although a system error may occur only when you work with Photoshop Lightroom, Photoshop Lightroom may not necessarily be the cause; it may be the only application that uses enough memory or processor cycles to expose the problem.
    To benefit most from this document, perform the tasks in order. Keep track of the tasks that you perform and the results of each, including errors and other problems. Adobe Technical Support can use this information to better assist you if you need to call.
    You must be logged on as an administrator to perform some of the procedures in this document.
    Important: Some of the procedures in this document may initiate a User Access Control dialog that asks for your permission to continue. Read the details in the dialog to determine if you want to continue. If you choose to cancel the dialog, then you will not be able to continue with that troubleshooting step.
    The steps in this document that refer to the Control Panel are in reference to the Classic view. For information on switching the Control Panel to the Classic view and many other common OS procedures, see Common Microsoft Windows Vista procedures (TechNote kb401275)
    Some of these procedures require you to locate hidden files and hidden folders. Some procedures require you to locate files by their full file names, which include extensions (for example, example_filename.ini). By default, Windows Explorer doesn't show hidden files, hidden folders, and file name extensions that it recognizes.
    To show hidden files, hidden folders, and all file name extensions in Windows Explorer:
    In Windows Explorer, choose Organize > Folder And Search Options.
    Click the View tab in the Folder Options dialog box.
    In Advanced Settings, select Show Hidden Files And Folders.
    Deselect Hide Extensions For Known File Types.
    Click OK.
    Note: The procedures in this document are based on the default interface of Windows Vista. If the interface is customized, some procedures may vary. For example, a commonly encountered difference is the navigation to Control Panel from the Start menu: You may navigate Start > Settings > Control Panel instead of Start > Control Panel. Additionally, the procedures in this document assume you are using the Classic View of the Control Panel: To view the Control Panel in the Classic View, click Switch To Classic View on the Control Panel navigation bar on the left side of the window.
    Beginning troubleshooting
    The tasks in this section can help you resolve the most common system errors. Before performing any of these tasks, back up all personal files (for example, Photoshop Lightroom files you created). Always restart the computer after a system error occurs to refresh system memory. Continuing to work without restarting the computer may compound the problem.
    1.Make sure that the system meets the minimum requirements for PhotoshopLightroom.
    Photoshop Lightroom may not run correctly on a system that doesn't meet the following requirements:
    Intel Pentium 4 or equivalent processor
    Microsoft Windows XP, Windows Vista, Windows 7
    768 MB of RAM (1 GB recommended)
    1 GB of available hard-disk space
    CD-ROM drive
    In addition to these requirements, a video card that supports 24-bit (16 million) or more colors, and a resolution of 1024 x 768 or higher, is recommended.
    * Photoshop Lightroom 1.0 will install and run on Windows Vista but Adobe cannot guarantee the quality of the software experience until Adobe fully certifies Photoshop Lightroom for use on Windows Vista.
    To check basic system information, such as processor speed and how much RAM is installed, choose Start > Control Panel > System.
    2. Delete previously installed application files, especially if you had the public beta version of Photoshop Lightroom installed.
    To delete files from a previous Adobe Photoshop Lightroom installation attempt:
    Choose Start > Control Panels > Add or Remove Programs.
    Select Adobe Photoshop Lightroom and choose to remove it.
    Close the Add Or Remove Programs window and the Control Panel.
    Open Windows Explorer.
    If the Lightroom.exe file is still in the Program Files\Adobe\Adobe Photoshop Lightroom folder, delete it.
    If the Lightroom Preferences.agprefs file is still in the Documents and Settings/[username]/Application Data/Adobe/Lightroom/Preferences folder, delete it.
    Empty the Recycle Bin.
    Try to reinstall. If you cannot, continue with the next two sections in this step:
    Move all the folders under the Users/[username]/AppData/Roaming/Adobe/Lightroom folder into a new folder on the desktop; name the folder Lightroom Presets. These are the presets that were installed with the application and that you created.
    Move all the folders under the Users/[username]/Pictures/Lightroom/Lightroom Previews.lrdata folder into a new folder on the desktop; name the folder Lightroom Previews. If you have a large number of images, you can move this folder back to its original location before you open Photoshop Lightroom, once it's installed. Or you can delete this folders to re-create it when Photoshop Lightroom opens. If there are further problems with Photoshop Lightroom after it's installed, it might be due to corruption in the previews, in which case you need to delete this folder and re-create it.
    Try to reinstall.Important: Do not delete the Lightroom Database.lrdb file!
    If there are further problems with Photoshop Lightroom after it's installed, these issues may be due to corruption in the preset files you created, in which case you need to remove them and re-create them, or test each preset individually.
    Note: If you can reinstall, and if this is not the first time you opened Photoshop Lightroom, then Photoshop Lightroom will look for a library database file. If it does not find a library in the expected location, it will prompt you to create a new library, locate the library, or exit. Exit will close the dialog box, and Photoshop Lightroom will not open. Although you can tell Photoshop Lightroom to locate your library, it's best to put it back in the default location and then open the application.
    If you can reinstall, close Photoshop Lightroom and then copy any presets you created from the Lightroom presets on the desktop back into the Users/[username]/AppData/Roaming/Adobe/Lightroom folder.
    If you cannot reinstall, then move the Lightroom Database.lrdb file from the Users/[username]/Pictures/Lightroom folder into a new folder called Lightroom Database File and save this file on the desktop. This is your database, if you previously had Photoshop Lightroom installed.
    Reinstall Photoshop Lightroom. If you cannot reinstall, continue with the next task in this document.
    3. Log in as Administrator before installingPhotoshopLightroom.
    In Windows Vista, you must be logged in with local (that is, machine) Administrator rights to install Photoshop Lightroom. If you don't have administrator rights, contact your system administrator for assistance.
    4. Check the CD and CD-ROM drive.
    Dust or dirt on a CD can interfere with an installation and prevent the CD-ROM drive from recognizing the CD. Examine the Photoshop Lightroom CD for dirt, dust, or fingerprints. Gently wipe the bottom of the CD from the center outward with a soft, lint-free cloth.
    Verify that the CD-ROM drive can read other CDs. If it can't, examine the CD caddy or loading tray for dirt, and clean it with a lint-free cloth. If it still can't read other CDs, contact the CD-ROM drive manufacturer or the computer manufacturer.
    5. Install current Windows service packs and other updates.
    Updates to the Windows operating system improve its performance and compatibility with applications. You can obtain Windows service packs and other updates from the Microsoft website at www.windowsupdate.com. For assistance installing service packs and other updates, contact Microsoft technical support.
    Important: Before you install a system update, check the system requirements for Photoshop Lightroom (and any third-party software or hardware you may use with Photoshop Lightroom ) to ensure compatibility. If the update isn't listed, then contact Adobe or the manufacturer of your third-party software or hardware.
    6. InstallPhotoshopLightroomfrom the desktop and use the default installation folder.
    Some system components such as device drivers and virus protection utilities can conflict with the Photoshop Lightroom installer and result in an incomplete or failed installation, or they can cause problems when you install to a folder or when you use a path to the default installation folder that contains a special character, such as #. To prevent these conflicts, install Photoshop Lightroom from the desktop, and use the default folder name and path.
    If Photoshop Lightroom autoplay displays, click Cancel when you are requested to Select the Language.
    Copy the Adobe Photoshop Lightroom folder from the Photoshop Lightroom CD-ROM to the desktop.
    Open the Adobe Photoshop Lightroom folder on the desktop.
    Double-click the Adobe Photoshop Lightroom.msi file, and follow the on-screen instructions.
    7.Re-create thePhotoshopLightroompreferences file.
    Re-create the Photoshop Lightroom preferences file to eliminate problems that a damaged preferences file might cause:
    Quit Photoshop Lightroom.
    Rename the Lightroom Preferences.agprefs file (for example, to Lightroom Preferences.old) in the Users/[username]/AppData/Roaming/Adobe/Lightroom/Preferences folder.
    Start Photoshop Lightroom. Photoshop Lightroom creates a new preferences file.
    If the problem continues, the preferences file isn't the cause. To restore custom settings, delete the new preferences file and restore the original name of the previous preferences file.
    8.Install and run Photoshop Lightroom while no other applications are running.
    Some applications may interfere with installing or running Photoshop Lightroom. Virus protection programs are meant to stop viruses from installing on your computer. Before installing or starting Photoshop Lightroom, disable other applications, including virus protection programs and startup items (items that start automatically with Windows).
    To disable startup items and non Microsoft services:
    Quit all applications.
    Choose Start, type msconfig in the Search text box, and press Enter.
    Write down all unselected items under the Startup and Services tabs.
    Click the General tab, and choose Selective Startup.
    Click the Startup tab and select Disable All.
    Click the Services tab and select Hide All Microsoft Services.
    Select Disable All then re-select FLEXnet Licensing Service. If you are unsure whether an item is essential, then leave it deselected (disabled).
    Click Apply, and restart Windows for the changes to take effect.
    Note: Upon restart, you'll be notified that the System Configuration utility has made changes to the way that Windows starts up. Click OK. When the System Configuration utility appears, click Cancel.
    Right-click icons in the Notification Area and close or disable any startup items that are still active.
    9. Install Photoshop Lightroom to a different hard disk after disabling startup items and installing from the hard disk.
    Hard disk problems can prevent Photoshop Lightroom from installing correctly. By installing Photoshop Lightroom to a different physical hard disk, you can verify if the original hard disk is preventing installation. First, completely remove Photoshop Lightroom from the hard disk.
    To install Photoshop Lightroom to a different hard disk after disabling startup items:
    Follow the steps in task 8 above to disable startup items.
    If Photoshop Lightroom autoplay displays, click Cancel when you are requested to Select the Language.
    Copy the Adobe Photoshop Lightroom folder from the Photoshop Lightroom CD-ROM to the desktop.
    Open the Adobe Photoshop Lightroom folder on the desktop.
    Double-click the Adobe Photoshop Lightroom.msi file, and follow the on-screen instructions.
    Click Change and select a different hard disk in the Change Current Destination Folder window. Click OK, and then follow the on-screen instructions.
    Intermediate troubleshooting
    If the tasks in the previous section don't solve the problem, try the following intermediate troubleshooting tasks.
    10. Install and run Photoshop Lightroom in a new user account.
    Create a new user account that has the same permissions as the account that you use when the problem occurs. If the problem doesn't recur, the original user account may be damaged. For instructions on creating a new user account, see To add a new user to the computer in Windows Help or contact your system administrator.
    11. Optimize handling of temporary files by Windows Vista.
    Windows and applications store working data in temporary (.tmp) files that they create on the hard disk. Excessive or outdated temporary files can interfere with performance of Windows or applications.
    Delete temporary files by using the Disk Cleanup utility included with Windows or by using the following instructions. Make sure that at least 1 GB of free space is available on the hard disk to which temporary files are written. To start Disk Cleanup, choose Start > All Programs > Accessories > System Tools > Disk Cleanup. For information about Disk Cleanup, see Windows Help.
    To manually delete temporary files:
    Note: Windows deletes temporary files when Windows and applications close normally. However, when Windows or an application crashes, temporary files can accumulate on the hard disk. Windows may prevent you from deleting some temporary files as they may be in use. Delete as many temporary files as you possibly can, without deleting the files that are in use.
    Quit all applications.
    Choose Start and type %tmp% in the Search text box and press Enter.
    Delete the contents of this folder.
    Note the drive letter where this directory is located.
    To ensure that at least 1 GB of free space is available on the hard disk to which temporary files are written:
    Choose Start > My Computer.
    Select the drive noted in step 4. Right click and select Properties.
    Confirm the drive has at least 1 GB of free space.
    12. Repair and defragment hard disks.
    System errors can occur if hard disks contain damaged sectors or fragmented files. Repair and defragment hard disks, either by using the Error-checking tool and Disk Defragmenter utility included with Windows or by using a third-party disk utility. You should run such utilities on each hard disk or partition. More information about the Error-checking tool and Disk Defragmenter appears below; for more information about a third-party disk utility, refer to the documentation for the utility.
    The Error-checking tool repairs bad sectors, lost allocation units and file fragments, cross-linked files, and invalid file names. To access the Error-checking tool, choose Start > Computer, right-click the desired hard disk, and choose Properties from the menu. In the Local Disk Properties dialog box, click the Tools tab, and then click Check Now in the Error-checking area.
    Note: To prevent Disk Defragmenter from moving files to bad sectors of a disk, run the Error-checking tool before running Disk Defragmenter.
    Disk Defragmenter rearranges the files and free space on your computer so that files are stored in contiguous units and free space is consolidated in one contiguous block. To access the Disk Defragmenter utility, choose Start > All Programs > Accessories > System Tools > Disk Defragmenter.
    13. Scan the system for viruses.
    Use current anti-virus software to check the system for viruses. Virus infections can damage software and cause system errors. For more information, see the documentation for the anti-virus software.
    14. Try to install Photoshop Lightroomon a different computer.
    Try to install Photoshop Lightroom on a different computer to determine if the problem is unique to your computer. If the problem is unique to your computer, contact the computer manufacturer; if the problem occurs on multiple computers, contact Adobe Technical Support.
    Advanced Troubleshooting
    If the tasks in the previous section don't resolve the problem, you may be able to resolve the problem by reinstalling Windows Vista and Photoshop Lightroom, reformatting your hard disk and reinstalling Windows Vista and Photoshop Lightroom, or by determining if hardware is conflicting with Photoshop Lightroom.
    Disclaimer: Adobe doesn't support hardware and provides these procedures as a courtesy only. For further assistance, contact the hardware manufacturer or an authorized reseller. If you troubleshoot hardware problems yourself, you may void the warranty for your computer.
    Note: Before you remove or rearrange hardware, turn off and disconnect power to the computer and any peripheral devices.
    15. Log in using the built-in Administrator account.
    The built-in Administrator account has a higher access level to the system than a normal local administrator account. By default the built-in Administrator account is disabled. For information about enabling and logging in to the built-in Administrator account, contact your system administrator. You can also refer to this support document on the Microsoft support website: http://support.microsoft.com/kb/926183/en-us?spid=11737&sid=73.
    16. Reformat the hard disk, and reinstall only Windows Vista and Photoshop Lightroom.
    Reformat the hard disk, and then install only Windows Vista and Photoshop Lightroom from the original installation media. Reformatting a disk erases all files it contains, so be sure to back up all personal files first. Also make sure that you have all application and system disks.
    For instructions on performing a clean installation of Windows Vista, see document 918884, "How to install Windows Vista" on the Microsoft website at http://support.microsoft.com.
    Note: Don't install additional software or hardware until you're sure that the problem is resolved. Don't back up the hard disk and restore Windows and Photoshop Lightroom instead of reinstalling them. If the problem is caused by an application or Windows, and either one is restored instead of reinstalled, the problem may recur.
    After you reformat the hard disk and reinstall Windows and Photoshop Lightroom, try to re-create the problem:
    If the problem no longer occurs, then install other applications one at a time and try to re-create the problem after each installation. If the problem occurs after an installation, then the recently installed application may be the cause.
    If the problem occurs when only Windows and Photoshop Lightroom are installed, then the cause may be hardware-related, and you should contact the hardware manufacturer or an authorized reseller for assistance.
    17. Check for problems with RAM modules.
    Ensure that the RAM modules are installed properly and are not the cause of your problem. Do one or both of the following:
    Change the order of the installed modules.
    Remove all but the minimum number of modules needed to run Windows and [product], and test to see if the problem persists. If it does, replace the modules you removed and remove the others, testing again to see if the problem recurs. If it doesn't, then one or more of the removed modules are the cause. For assistance, contact the RAM manufacturer.

    You've tried Help>Updates from within photoshop cs6?
    Or this 8.3 updater
    http://swupdl.adobe.com/updates/oobe/aam20/win/PhotoshopCameraRaw7-7.0/8.3.52/setup.zip
    If that doesn't work, you can install camera raw 8.3 by following the directions on the following page
    Adobe Camera Raw Help | Camera Raw/DNG Converter 8.4 on Mac OS 10.6, Windows XP, and Vista

  • Hey, I'm doing some cross browser testing and i want to know Is there any difference between the behavior of Firefox in an operating system 64bit & operating system with 32bit. (like windows7/windows vista...) Thanks,

    Hey, I'm doing some cross browser testing and i want to know Is there any difference between the behavior of Firefox in an operating system 64bit & operating system with 32bit. (like windows7/windows vista...) Thanks,

    Hi O_H_I_O,
    Have you got an error code ?
    Considering it is a brand new machine ,please update the machines .To get a better performance of the machines ,we should always keep it up to date .
    There is a possibility that the DVD/CD-ROm drives driver is old or has corrupted .Please open the device manager , update or reinstall the driver to have a check.
    Apart from this ,we can run the built-in tool to a diagnostic :
    Control Panel\All Control Panel Items\Troubleshooting\All Categories\Hardware and Devices
    We also can run the following fixit tool to have a check.
    Fix problems with CD or DVD drives that can’t read or write media
    http://support.microsoft.com/mats/cd_dvd_drive_problems
    Best regards

  • I have been trying to install Itunes for 3 days to my computer.  MY eyes burn and I want to smash this computer at this point!!!! HELP ME!!! I receive this message when I run the diagnostic on my iphone Microsoft Windows Vista Ultimate Edition (Build 6000

    I have been trying to install Itunes for 3 days to my computer.  MY eyes burn and I want to smash this computer at this point!!!! HELP ME!!! I receive this message when I run the diagnostic on my iphone
    Microsoft Windows Vista Ultimate Edition (Build 6000)
    Dell Inc. Studio 1535
    iTunes 10.6.1.7
    QuickTime not available
    FairPlay 1.14.37
    Apple Application Support 2.1.7
    iPod Updater Library 10.0d2
    CD Driver 2.2.0.1
    CD Driver DLL 2.1.1.1
    Apple Mobile Device Driver 1.57.0.0
    Bonjour 3.0.0.10 (333.10)
    Gracenote SDK 1.9.5.502
    Gracenote MusicID 1.9.5.115
    Gracenote Submit 1.9.5.143
    Gracenote DSP 1.9.5.45
    iTunes Serial Number 0020AEDC02A7C4B8
    Current user is an administrator.
    The current local date and time is 2012-04-17 17:05:40.
    iTunes is not running in safe mode.
    WebKit accelerated compositing is enabled.
    HDCP is supported.
    Core Media is supported.
    Video Display Information
    Intel Corporation, Mobile Intel(R) 965 Express Chipset Family
    Intel Corporation, Mobile Intel(R) 965 Express Chipset Family
    **** External Plug-ins Information ****
    No external plug-ins installed.
    **** Network Connectivity Tests ****
    Network Adapter Information
    Adapter Name:          {92497F93-8A79-419C-AA27-50CD2F263F77}
    Description:          Microsoft Virtual WiFi Miniport Adapter
    IP Address:          0.0.0.0
    Subnet Mask:          0.0.0.0
    Default Gateway:          0.0.0.0
    DHCP Enabled:          Yes
    DHCP Server:
    Lease Obtained:          Wed Dec 31 19:00:00 1969
    Lease Expires:          Wed Dec 31 19:00:00 1969
    DNS Servers:
    Adapter Name:          {6FECCC1D-04CF-4A3F-92B6-DC6E68D12BE5}
    Description:          Dell Wireless 1397 WLAN Mini-Card
    IP Address:          192.168.0.118
    Subnet Mask:          255.255.255.0
    Default Gateway:          192.168.0.1
    DHCP Enabled:          Yes
    DHCP Server:          192.168.0.1
    Lease Obtained:          Tue Apr 17 16:59:28 2012
    Lease Expires:          Wed Apr 18 16:59:28 2012
    DNS Servers:          192.168.20.254
                        192.168.30.217
    Adapter Name:          {3323A300-E864-46C3-A6B6-F0B90AFF4AFE}
    Description:          Broadcom NetLink (TM) Gigabit Ethernet
    IP Address:          0.0.0.0
    Subnet Mask:          0.0.0.0
    Default Gateway:          0.0.0.0
    DHCP Enabled:          Yes
    DHCP Server:
    Lease Obtained:          Wed Dec 31 19:00:00 1969
    Lease Expires:          Wed Dec 31 19:00:00 1969
    DNS Servers:
    Active Connection:          LAN Connection
    Connected:          Yes
    Online:                    Yes
    Using Modem:          No
    Using LAN:          Yes
    Using Proxy:          No
    Firewall Information
    Windows Firewall is on.
    iTunes is NOT enabled in Windows Firewall.
    Connection attempt to Apple web site was unsuccessful.
    The network connection timed out.
    Connection attempt to browsing iTunes Store was successful.
    Connection attempt to purchasing from iTunes Store was successful.
    Connection attempt to iPhone activation server was successful.
    Connection attempt to firmware update server was unsuccessful.
    The network connection timed out.
    Connection attempt to Gracenote server was successful.
    Last successful iTunes Store access was 2012-04-17 17:04:26.
    **** CD/DVD Drive Tests ****
    No drivers in LowerFilters.
    UpperFilters: GEARAspiWDM (2.2.0.1),
    E: Optiarc DVD+-RW AD-7640S, Rev HD14
    Drive is empty.
    **** Device Connectivity Tests ****
    iPodService 10.6.1.7 is currently running.
    iTunesHelper 10.6.1.7 is currently running.
    Apple Mobile Device Service not found.
    Universal Serial Bus Controllers:
    Intel(R) ICH8 Family USB Universal Host Controller - 2830.  Device is working properly.
    Intel(R) ICH8 Family USB Universal Host Controller - 2831.  Device is working properly.
    Intel(R) ICH8 Family USB Universal Host Controller - 2832.  Device is working properly.
    Intel(R) ICH8 Family USB Universal Host Controller - 2834.  Device is working properly.
    Intel(R) ICH8 Family USB Universal Host Controller - 2835.  Device is working properly.
    Intel(R) ICH8 Family USB2 Enhanced Host Controller - 2836.  Device is working properly.
    Intel(R) ICH8 Family USB2 Enhanced Host Controller - 283A.  Device is working properly.
    FireWire (IEEE 1394) Host Controllers:
    Ricoh 1394 OHCI Compliant Host Controller.  Device is working properly.
    **** Device Sync Tests ****
    No iPod, iPhone, or iPad found.

    This should get your itunes store connection working.
    Close your iTunes,
    Go to command Prompt -
    (Win 7/Vista) - START/ALL PROGRAMS/ACCESSORIES, right mouse click "Command Prompt", choose "Run as Administrator".
    (Win XP SP2 & above) - START/ALL PROGRAMS/ACCESSORIES/Command Prompt
    In the "Command Prompt" screen, type in
    netsh winsock reset
    Hit "ENTER" key
    Restart your computer.
    If you do get a prompt after restart windows to remap LSP, just click NO.
    Now launch your iTunes and see if it is working now.
    If you are still having these type of problems after trying the winsock reset, refer to this article to identify which software in your system is inserting LSP:
    iTunes 10.5 for Windows: May see performance issues and blank iTunes Store
    http://support.apple.com/kb/TS4123?viewlocale=en_US

  • When I run a diagnostic on my network connection, Itunes says that a secure connection was not found giving the following message.  Microsoft Windows Vista Home Premium Edition Service Pack 2 (Build 6002) Hewlett-Packard HP Pavilion dv6700 Notebook PC iTu

    Microsoft Windows Vista Home Premium Edition Service Pack 2 (Build 6002)
    Hewlett-Packard HP Pavilion dv6700 Notebook PC
    iTunes 10.2.1.1
    QuickTime 7.6.9
    FairPlay 1.11.16
    Apple Application Support 1.5
    iPod Updater Library 10.0d2
    VoiceOver Kit 1.4 (222093/222742)
    CD Driver 2.2.0.1
    CD Driver DLL 2.1.1.1
    Apple Mobile Device 3.4.0.25
    Apple Mobile Device Driver 1.55.0.0
    Bonjour 2.0.4.0 (214.3)
    Gracenote SDK 1.8.2.457
    Gracenote MusicID 1.8.2.89
    Gracenote Submit 1.8.2.123
    Gracenote DSP 1.8.2.34
    iTunes Serial Number 0025AAF8089EC380
    Current user is not an administrator.
    The current local date and time is 2011-05-15 21:05:05.
    iTunes is not running in safe mode.
    WebKit accelerated compositing is enabled.
    HDCP is not supported.
    Core Media is supported.
    Video Display Information
    Intel Corporation, Mobile Intel(R) 965 Express Chipset Family
    Intel Corporation, Mobile Intel(R) 965 Express Chipset Family
    **** External Plug-ins Information ****
    No external plug-ins installed.
    Genius ID: dc0c6f739bfede483c8983f10e41784f
    iPodService 10.2.1.1 is currently running.
    iTunesHelper 10.2.1.1 is currently running.
    Apple Mobile Device service 3.3.0.0 is currently running.
    **** Network Connectivity Tests ****
    Network Adapter Information
    Adapter Name:    {588EB1BD-8374-43B1-B687-C47C33764298}
    Description:    Intel(R) Wireless WiFi Link 4965AGN
    IP Address:    192.168.1.2
    Subnet Mask:    255.255.255.0
    Default Gateway:    192.168.1.1
    DHCP Enabled:    Yes
    DHCP Server:    192.168.1.1
    Lease Obtained:    Sun May 15 20:23:07 2011
    Lease Expires:    Mon May 16 20:23:07 2011
    DNS Servers:    192.168.1.1
    Adapter Name:    {1C11AE53-28A5-4AC7-BA9F-CD4109D7856C}
    Description:    Realtek RTL8101E Family PCI-E Fast Ethernet NIC (NDIS 6.0)
    IP Address:    0.0.0.0
    Subnet Mask:    0.0.0.0
    Default Gateway:    0.0.0.0
    DHCP Enabled:    Yes
    DHCP Server:   
    Lease Obtained:    Wed Dec 31 18:00:00 1969
    Lease Expires:    Wed Dec 31 18:00:00 1969
    DNS Servers:   
    Active Connection:    LAN Connection
    Connected:    Yes
    Online:        Yes
    Using Modem:    No
    Using LAN:    Yes
    Using Proxy:    No
    SSL 3.0 Support:    Enabled
    TLS 1.0 Support:    Enabled
    Firewall Information
    Windows Firewall is on.
    iTunes is NOT enabled in Windows Firewall.
    Connection attempt to Apple web site was unsuccessful.
    The network connection timed out.
    Basic connection to the store failed.
    The network connection timed out.
    Connection attempt to Gracenote server was successful.
    The network connection timed out.
    Last successful iTunes Store access was 2011-04-30 21:01:11.

    Windows Firewall is on.
    iTunes is NOT enabled in Windows Firewall.
    We'd better check on that, kris. If you enable iTunes in your Windows firewall, does that help with your connection? See the following document for instructions:
    How to enable iTunes in the Windows XP Firewall
    EDIT: Drat ... gave you the link to the wrong document. Try this one instead for your Vista:
    How to enable iTunes in the Windows Vista and Windows 7 Firewall
    Message was edited by: b noir

  • Bit Locker Drive Encryption of Windows Vista

    Have just downloaded the Bios Upgrade version 2.2 (QG40 BIOS_W220.exe), but I inadvertently omitted to turn the 'Bit Locker Drive Encryption of Windows Vista' off first, as Toshiba had advised.
    Is there any corrections I can make to rectify this omission and ensure the G40 and the software operate correctly?

    Thanks for your prompt reply Jeka-Nn. But I have several further questions before going too far with the suggestions as I am not familiar with software modifications.
    1. What am I actually trying to do overall by downloading and using the suggested application.? Can you give me some overall picture of what I am trying to do?
    2. Does this fix the problem without me having to make choices--is it self sufficient/self-installing?
    3. Will it return the system to its correct operational settings before I downloaded the Bios upgrade?
    4. I have downloaded the application suggested, but when I try to open the file it sends up a message that reads:
    Error; this installer does not contain any compressed files. To create a self extracting installation package (with embedded files) run:
    "TrueCrypt Setup.exe" /p
    When I press OK, it simply reverts to the downloaded list which has the TrueCrypt v7.0 included, but nothing else happens.
    What do I need to do to fully install the application?
    5. Are there any other steps /inclusions that I need to make to fully correct my 'stupidity'?
    Sorry about all these questions but you can see I am a raw beginner at this work.
    With thanks, rons

  • Scanners Supported in Microsoft Windows Vista or Windows 7

    I have a HP Scanjet 5370c running on my desktop PC with Windows XP, and am planning to upgrade to Windows 7 when released.  However, while running the Microsoft Windows 7 Upgrade Advisor Beta software to determine system compatibility, the report stated that the Scanjet 5370 is not compatible with Windows 7.  Further investigation on the HP website page entitled "Scanners Supported in Microsoft Windows Vista," it appears that my scanner is not supported in Vista either.  Does this mean that my scanner which functions great under XP has been made obsolete by lack of a driver which will run under Vista or Windows 7?  I like the Scanjet 5370c better than most newer scanners that I have seen, so it seems a real shame to throw out good equipment for lack of driver support.
    This question was solved.
    View Solution.

    I understand your point, and it is a good one.  BUT it can cost the manufacturer sales of new scanners.
    The Scanjet 400C, for example, was a very popular scanner.  By not updating it for Vista, HP turned its back on a lot of its customers. 
    When I do buy a scanner to work with Windows 7, guess what?  Because of HP's behaviour, I'll be that much less likely to buy an HP one. 
    I'm probably not the only person seeing things that way.

  • Problem Installing Developer Suite on WIndows Vista

    Hi! i'm a student of computer science, and i need to install developer suite for a proyect i need to do for one of my classes.
    I have a problem installing developer suit on Windows Vista. After i download and unzip both disk, i run the setup from the installer folder and i get an alert that says: "abnormal termination. There's been an internal error. Send the following files to the Oracle Suport Services: Unknown, Unknow, Unknow". I've also tryed with the setup from the main folder and i get the same alert. I don't know what to do, i've tryed setting the compatibility mode to windows XP, runnig as administrator, changing the performance configuration of my computer and nothing. Please help me to install the program!

    Which developer suite are you using???

  • Error with Contribute 3 on Windows Vista

    Hi
    With Contribute 3 on Windows Vista, does anyone know if
    anything can be done about the following error:
    Error 1904.Module
    C:\Windows\system32\Macromed\Flash\Flash.ocx
    Failed to register. HRESULT -2147220473. Contact
    Your support personnel
    MMxtp has stopped working
    A problem caused the program to stop working correctly.
    Windows will close the program and notify you if a solution
    is available.
    Many thanks
    lukaro

    I've got the same problem. Adobe support are hopeless since
    they bought Macromedia. "We don't support Contribute 3 any longer.
    You'll have to upgrade to CS3". Downloaded CS3 trial. Same
    problems. "Sorry, we don't support trial versions of products" What
    a bunch of wankers. How the hell do they expect anyone to buy their
    products if 1. they don't work and 2. they don't support them. I'll
    find something else to buy from now on.

Maybe you are looking for