Problems with DW:CS3 and CSS Display

Hi...DW:CS3 is not rendering pages that work under DW8 and
Firefox and IE6. The best example I can show you is from Chapter 13
of CSS: The Missing Manual by McFarland. The full tutorial files
can be found here: www.sawmac.css (you have to download the files,
unzip them and then look at the chapter_13_finished html file.
The content and news divisions are pushed down after the
navigation. Does anyone know if this is bad code or a problem w/th
the CS3 engine. It works fine under DW8.
Thanks for your help.
(I've posted the html and main css page here)

Yes...the pages from the book display perfectly in dw8, but
not in DWcs3.
I found that by commenting out the "clear:left;" under "#nav"
the page displays properly in DWcs3, too. That leaves open the
question of "why".
Thanks.

Similar Messages

Scanning Problem with Mavericks, CS3, and Dell 2155cn

New MB Pro running Mavericks. Adobe CS3 loaded. Acrobat Pro will print to network Dell 2155CN, but will not scan. Same installation on older MBP running Lion scans from Acrobat with no problem. Does Mavericks have a problem with the Dell driver?S

Might be the driver. I don't see a Mavericks compatible driver > http://ftp.dell.com/Pages/Drivers/dell-2155cn-cdn.html
It just says Mac OS X. That's rather vague.
Try this workaround.
Image Capture can scan for you. It's in your Applications folder.
Mac Basics: Using a scanner

Problems with uninstalling cs3 and installing cs3 again

Hi all,
I hope someone can help me with this. I have uninstalled cs3 because the
computer prompts me that my activation has stopped working. So as I began to
install my cs3 design premium, the computer prompts me to insert my cd for
my design premium. That is strage as I have already insertted my cd. So as I
click on OK several times(they keep on prmpting me to insert my cd again.
After I clicked on (most probably 20 ~ 30 times), the installer said I have
not successfully installed any of the applications I have selected. Why so?
I suspect I have not uninstalled cleanly. I have uninstalled from the
add/remove components from the windows. Is there anyway to solve this
problem? What am I going to do now??
Disappointed.

You probably need to uninstall again .. reboot .. and then follow the instructions on this page. Download and use the CS3 Clean Up Script for your OS as instructed. http://www.adobe.com/support/contact/cs3clean.html Then reboot one more time and reinstall. -- Nancy Gill Adobe Community Expert Author: Dreamweaver 8 e-book for the DMX Zone Co-Author: Dreamweaver MX: Instant Troubleshooter (August, 2003) Technical Editor: Dreamweaver CS3: The Missing Manual, DMX 2004: The Complete Reference, DMX 2004: A Beginner's Guide Mastering Macromedia Contribute Technical Reviewer: Dynamic Dreamweaver MX/DMX: Advanced PHP Web Development <[email protected]> wrote in message news:[email protected].. > Hi all, > > I hope someone can help me with this. I have uninstalled cs3 because the > computer prompts me that my activation has stopped working. So as I began > to > install my cs3 design premium, the computer prompts me to insert my cd for > my design premium. That is strage as I have already insertted my cd. So as > I > click on OK several times(they keep on prmpting me to insert my cd again. > After I clicked on (most probably 20 ~ 30 times), the installer said I > have > not successfully installed any of the applications I have selected. Why > so? > > I suspect I have not uninstalled cleanly. I have uninstalled from the > add/remove components from the windows. Is there anyway to solve this > problem? What am I going to do now?? > > Disappointed. > > >

Problem with Mapping exectution and the display Queue

Hi All,
I am getting the following error while testing any newly designed mapping.
Source code has syntax error: java.lang.NoClassDefFoundError: com/sun/tools/javac/Main Exception in thread "main"
But all previously designed(activated) mappings are executing successfully.
Can you please anybody calrify this problem??
Thanks,
sekhar

If you are using UDF in your message mapping then please do check it first before
testing the whole mapping
you can check UDF by :
source_field -
UDF-----target_filed
right click on the UDF node in the maaping Editor and slecet queue, it will check the your UDF code and if has error it will show you.
Thanks
Farooq.

Rewards points if you found it useful

Hello Apple. Iphone6 ios8.0.2. I have problem with activation imsg and fctm. My number doesnt display on both apps. I can only use them with my apple ID. How can i fix this problem. Country:Azerbaijan. Number: *********

Hello Apple. Iphone6 ios8.0.2. I have problem with activation imsg and fctm. My number doesnt display on both apps. I can only use them with my apple ID. How can i fix this problem. Country:Azerbaijan. Number: *******
<Edited by Host>

Hello Khayalh,
You should be able to link your phone number by following the steps in the article below. From your iPhone, sign out of FaceTime and iMessage and then sign back in and it should link. Check in the Start Conversation With and I Can Be Reached at section in iMessage and FaceTime respectively.
iOS and OS X: Link your phone number and Apple ID for use with FaceTime and iMessage
http://support.apple.com/kb/HT5538
Regards,
-Norm G.

I am having problem with Photoshop CS3 hanging

I am having a lot of problems with Photoshop CS3 hanging and crashing. Particularly when I open hi-res photos and click on tools, like the type tool. Is anyone else experiencing this problem? Any suggestions on how to fix the problem?
Thanks.

Buy more RAM, plain and simple. Sounds the program is severely suffocating. for on-screen display fonts need also be rasterized, which also costs RAM, even if they otherwise remain native vectors. How much memory do you have? as a short term solution, you may wish to increase the program's RAM usage in the prefs, but it may not resolve the issues entirely.
Mylenium

Browser compatibility problem with t:selectOneMenu and JavaScript calendar

I'm having problem with <t:selectOneMenu> and JavaScript calendar on IE. It works fine on Firefox but doesn't work on IE.
The JSF code is as follows:
<tr>
 <td align="right">
 Archive Date
 </td>
 <td align="left" colspan="3">
 <table cellpadding="0" cellspacing="0" border="0">
 <tr>
 <td>
 After (Ex. Oct 18, 2007)
 <h:outputLabel for="txtArchiveDateAfter" value="Archive Date After" rendered="false"/>
 
 <t:inputText required="false" value="#{nonItemImageSearchPage.stringArchiveDateAfter}" name="txtArchiveDateAfter" id="txtArchiveDateAfter" forceId="true" styleClass="inp" style="width: 128px">
 </t:inputText>
 <t:graphicImage value="/images/calendar.png" id="dtpArchiveDateAfter" name="dtpArchiveDateAfter" forceId="true" style="border: 2px solid #EEE; cursor: pointer"></t:graphicImage>
 
 <t:message for="txtArchiveDateAfter" styleClass="form_error" replaceIdWithLabel="true"></t:message>
 </td>
 <td>
 Before (Ex. Oct 18, 2007)
 <h:outputLabel for="txtArchiveDateBefore" value="Archive Date Before" rendered="false"/>
 
 <t:inputText value="#{nonItemImageSearchPage.stringArchiveDateBefore}" name="txtArchiveDateBefore" id="txtArchiveDateBefore" forceId="true" style="width:128px" styleClass="inp">
 </t:inputText>
 <t:graphicImage value="/images/calendar.png" id="dtpArchiveDateBefore" name="dtpArchiveDateBefore" forceId="true" style="border: 2px solid #EEE; cursor: pointer"></t:graphicImage>
 
 <t:message for="txtArchiveDateBefore" styleClass="form_error" replaceIdWithLabel="true"></t:message>
 </td>
 </tr>
 </table>
 </td>
 </tr>
 <tr>
 <td align="right" >
 <h:outputLabel for="drpBackground" value="Background"/>
 </td>
 <td align="left" class="right_separator">
 <t:selectOneMenu id="drpBackground" forceId="true" value="#{nonItemImageSearchPage.nonItemImageSearchModel.backgroundId}" styleClass="inp" style="width: 150px">
 <f:selectItem itemLabel="--------" itemValue="-1"/>
 <s:selectItems value="#{nonItemImageSearchPage.backgroundPrefsList}"
 var="backgroundPrefs" itemValue="#{backgroundPrefs.id}" itemLabel="#{backgroundPrefs.description}" />
 </t:selectOneMenu>
 </td>
 <td align="right" class="left_separator">
 <h:outputLabel for="drpTheme" value="Theme"/>
 </td>
 <td align="left" >
 <t:selectOneMenu id="drpTheme" forceId="true" value="#{nonItemImageSearchPage.nonItemImageSearchModel.themeId}" styleClass="inp WCHhider" style="width:150px;">
 <f:selectItem itemLabel="--------" itemValue="-1"/>
 <s:selectItems value="#{nonItemImageSearchPage.themePrefsList}"
 var="themePrefs" itemValue="#{themePrefs.id}" itemLabel="#{themePrefs.description}" />
 </t:selectOneMenu>
 </td>
 </tr>
 <tr>
 <td align="right" >
 <h:outputLabel for="drpSeason" value="Season"/>
 </td>
 <td align="left" class="right_separator">
 <t:selectOneMenu id="drpSeason" forceId="true" value="#{nonItemImageSearchPage.nonItemImageSearchModel.seasonId}" styleClass="inp" style="width:150px">
 <f:selectItem itemLabel="--------" itemValue="-1"/>
 <s:selectItems value="#{nonItemImageSearchPage.seasonPrefsList}"
 var="seasonPrefs" itemValue="#{seasonPrefs.id}" itemLabel="#{seasonPrefs.description}" />
 </t:selectOneMenu>
 </td>
 <td align="right" class="left_separator">
 <h:outputLabel for="drpClothing" value="Clothing"/>
 </td>
 <td align="left" >
 <t:selectOneMenu id="drpClothing" forceId="true" value="#{nonItemImageSearchPage.nonItemImageSearchModel.clothingId}" styleClass="inp" style="width:150px">
 <f:selectItem itemLabel="--------" itemValue="-1"/>
 <s:selectItems value="#{nonItemImageSearchPage.clothingPrefsList}"
 var="clothingPrefs" itemValue="#{clothingPrefs.id}" itemLabel="#{clothingPrefs.description}" />
 </t:selectOneMenu>
 </td>
 </tr>
 <tr>
 <td align="right" >
 <h:outputLabel for="drpToy" value="Toy"/>
 </td>
 <td align="left" class="right_separator">
 <t:selectOneMenu id="drpToy" forceId="true" value="#{nonItemImageSearchPage.nonItemImageSearchModel.toyId}" styleClass="inp" style="width:150px">
 <f:selectItem itemLabel="--------" itemValue="-1"/>
 <s:selectItems value="#{nonItemImageSearchPage.toyPrefsList}"
 var="toyPrefs" itemValue="#{toyPrefs.id}" itemLabel="#{toyPrefs.description}" />
 </t:selectOneMenu>
 </td>
 <td align="right" class="left_separator">
 <h:outputLabel for="drpJuvenile" value="Juvenile"/>
 </td>
 <td align="left" >
 <t:selectOneMenu id="drpJuvenile" forceId="true" value="#{nonItemImageSearchPage.nonItemImageSearchModel.juvenileId}" styleClass="inp" style="width:150px">
 <f:selectItem itemLabel="--------" itemValue="-1"/>
 <s:selectItems value="#{nonItemImageSearchPage.juvenilePrefsList}"
 var="juvenilePrefs" itemValue="#{juvenilePrefs.id}" itemLabel="#{juvenilePrefs.description}" />
 </t:selectOneMenu>
 </td>
 </tr>
 <tr>
 <td align="right">
 <h:outputLabel for="drpGroup" value="Grouping"/>
 </td>
 <td align="left" class="right_separator">
 <t:selectOneMenu id="drpGroup" forceId="true" value="#{nonItemImageSearchPage.nonItemImageSearchModel.modelGroupingId}" styleClass="inp" style="width:150px;">
 <f:selectItem itemLabel="--------" itemValue="-1"/>
 <s:selectItems value="#{nonItemImageSearchPage.groupPrefsList}"
 var="groupPrefs" itemValue="#{groupPrefs.id}" itemLabel="#{groupPrefs.description}" />
 </t:selectOneMenu>
 </td>
 <td class="left_separator"> </td>
 <td> </td>
 </tr>
The JavaScript code is as follows:
<script type="text/javascript" language="javascript">
 var dtpArchiveDateBefore = new MooCal("txtArchiveDateBefore");
 var dtpArchiveDateAfter = new MooCal("txtArchiveDateAfter");
 window.addEvent("domready", function(){
 $("dtpArchiveDateBefore").addEvent("click", function(e){
 var event = new Event(e).stop();
 var x = (event.client.x)-150;
 var y = event.client.y;
 dtpArchiveDateBefore.show(x,y); // Display the calendar at the position of the mouse cursor
 dtpArchiveDateBefore.minYear = 1800;
 dtpArchiveDateBefore.maxYear = 2017;
 /*$("txtArchiveDateBefore").addEvent("click", function(e){
 e.target.blur();
 var event = new Event(e).stop();
 var x = (event.client.x)-150;
 var y = event.client.y;
 dtpArchiveDateBefore.show(x,y); // Display the calendar at the position of the mouse cursor
 dtpArchiveDateBefore.minYear = 1800;
 dtpArchiveDateBefore.maxYear = 2017;
 $("dtpArchiveDateAfter").addEvent("click", function(e){
 var event = new Event(e).stop();
 var x = (event.client.x)-150;
 var y = event.client.y;
 dtpArchiveDateAfter.show(x,y); // Display the calendar at the position of the mouse cursor
 dtpArchiveDateAfter.minYear = 1800;
 dtpArchiveDateAfter.maxYear = 2017;
 /* $("txtArchiveDateAfter").addEvent("click", function(e){
 e.target.blur();
 var event = new Event(e).stop();
 var x = (event.client.x)-150;
 var y = event.client.y;
 dtpArchiveDateAfter.show(x,y); // Display the calendar at the position of the mouse cursor
 dtpArchiveDateAfter.minYear = 1800;
 dtpArchiveDateAfter.maxYear = 2017;
 </script>When the calendar is above t:selectOneMenu, it doesn't show up on t:selectOneMenu area. Could anyone help me solve the issue?
Thanks
Rashed

There are dozens of CSS attributes that can (and have to) be handwritten. Trouble with them is that, like text shadows, they don't appear in all browsers. I have nine different browsers installed and test pages in ALL of them before I "finish" building site or page for a template.
I try to build for Firefox, out of personal preference for it, but I have to do things that work with IE because it still holds the market share (46%IE to 42%FF), and I will only go with designs that work in IE, FF, NS, Opera, Safari, and Chrome.
As to your questions.
1. The compatibility check is most likely current with the time of the build. I don't know if that component updates as browsers do, but I'd tend to think it doesn't. I'm using CS4 and there haven't been any updates for it in nearly a year. Firefox has released 4.0, Opera released 11, and Safari released 5 since then. The updater would have found and downloaded something if it was available.
2. I could only guess. Text shadows DON'T show up in design view (or in IE) but they do in browser preview. It's just a UI quirk, and it means "trial and error" is the onyl way to get what you want.
3. The quick-selects which are in DW dropdowns or popouts are the ones most common to CSS designs and have been proven to work with all browsers at the time of release of your particular build of DW.
Hope that helps..

Problems with ListViews Drag and Drop

I'm surprised that there isn't an Active X control that can do this more
easily? Would
be curious to find out if there is - although we aren't really embracing the
use of
them within Forte because it locks you into the Microsoft arena.
---------------------- Forwarded by Peggy Lynn Adrian/AM/LLY on 02/03/98 01:33
PM ---------------------------
"Stokesbary, Michael" <[email protected]> on 02/03/98 12:19:52 PM
Please respond to "Stokesbary, Michael" <[email protected]>
To: "'[email protected]'" <[email protected]>
cc:
Subject: Problems with ListViews Drag and Drop
I am just curious as to other people's experiences with the ListView
widget when elements in it are set to be draggable. In particular, I am
currently trying to design an interface that looks a lot like Windows
Explorer where a TreeView resides on the left side of the window and a
ListView resides on the right side. Upon double clicking on the
ListView, if the current node that was clicked on was a folder, then the
TreeView expands this folder and the contents are then displayed in the
ListView, otherwise, it was a file and it is brought up in Microsoft
Word. All this works great if I don't have the elements in the ListView
widget set to be draggable. If they are set to be draggable, then I am
finding that the DoubleClick event seems to get registered twice along
with the ObjectDrop event. This is not good because if I double click
and the current node is a folder, then it will expand this folder in the
TreeView, display the contents in the ListView, grab the node that is
now displayed where that node used to be displayed and run the events
for that as well. What this means, is that if this is a file, then Word
is just launched and no big deal. Unfortunately, if this happens to be
another directory, then the previous directory is dropped into this
current directory and a recursive copy gets performed, giving me one
heck of a deep directory tree for that folder.
Has anybody else seen this, or am I the only lucky one to experience.
If need be, I do have this exported in a .pex file if anybody needs to
look at it more closely.
Thanks in advance.
Michael Stokesbary
Software Engineer
GTE Government Systems Corporation
tel: (650) 966-2975
e-mail: [email protected]

here is the required code....
private static class TreeDragGestureListener implements DragGestureListener {
 public void dragGestureRecognized(DragGestureEvent dragGestureEvent) {
 // Can only drag leafs
 JTree tree = (JTree) dragGestureEvent.getComponent();
 TreePath path = tree.getSelectionPath();
 if (path == null) {
 // Nothing selected, nothing to drag
 System.out.println("Nothing selected - beep");
 tree.getToolkit().beep();
 } else {
 DefaultMutableTreeNode selection = (DefaultMutableTreeNode) path
 .getLastPathComponent();
 if (selection.isLeaf()) {
 TransferableTreeNode node = new TransferableTreeNode(
 selection);
 dragGestureEvent.startDrag(DragSource.DefaultCopyDrop,
 node, new MyDragSourceListener());
 } else {
 System.out.println("Not a leaf - beep");
 tree.getToolkit().beep();
}

Problem with the MenuBar and how can i delete a own component out of the storage

Hello,
I opened this thread in the category "Flex Builder 2", but
under this category my questions fit better.
I have a problem with the MenuBar and a question to delete a
component out of storage.
1. We have implemented the MenuBar, which was filled
dynamically with XML data.
Sporadically it will appear following fault, if we "mousover"
the root layer.
RangeError: Error #2006: Der angegebene Index liegt
außerhalb des zulässigen Bereichs.
at flash.display::DisplayObjectContainer/addChildAt()
at mx.managers::SystemManager/
http://www.adobe.com/2006/flex/mx/internal::rawChildren_addChildAt()
at mx.managers::SystemManager/addChild()
at mx.managers::PopUpManager$/addPopUp()
at mx.controls::Menu/show()
at mx.controls::MenuBar/::showMenu()
at mx.controls::MenuBar/::mouseOverHandler()
Here a abrid ged version of our XML to create the MenuBar:
<Menuebar>
<menu label="Artikel">
<menu label="Artikel anlegen" data="new_article" />
<menu label="Artikel bearbeiten" data="edit_article" />
<menu label="Verpackung">
<menu label="Verpackung anlegen" data="new_package" />
<menu label="Verpackung bearbeiten" data="edit_package"
/>
</menu>
<menu label="Materialgruppe">
<menu label="Materialgruppe anlegen"
data="new_materialgroup" />
<menu label="Materialgruppe bearbeiten"
data="edit_materialgroup" />
</menu>
</menu>
</Menuebar>
It is a well-formed XML.
2. Delete a component out of storage
We have some own components (basically forms), which will be
created and shown by an construct e.g.
var myComponent : T_Component = new T_Component ;
this.addChild(myComponent)
Some of our forms will be created in an popup. On every call
of the popup, we lost 5 mb or more, all childs on the windows will
be removed by formname.removeAllChild();
What cann we do, that the garbage collector will dispose this
objects.
Is there a way to show all objects with references (NOT
NULL)?
I have read in the Flex Help, that
this.removeChild(myComponent) not delete the form and/or object out
of the storage.
Rather the object must be destroyed.
It is sufficient to call delete(myComponent) about remove
this object out of the storage as the case may be that the
garbage-collector remove this object at any time?
Or how can I destroy a component correctly. What happens with
the widgets on this component e.g. input fields or datagrids?
Are they also being deleted?
Thanks for your help.
Matze

If you mena the "photo Library" then you cannot delete it.
This is how iphone handles photos. There are not two copies. There a re simply two places from which to access the same photos. ALL photos synced to iphone can be accessed via Photo Library. Those same pics can be accessed via their individual folder.

I have a problem with my photoshop CS6 retina display

I have a problem with my photoshop CS6 retina display. my photoshop doesn't support retina on my Macbook pro 15 retina. the version I have in my laptop is 13.0v. I was trying to update to 13.1 from my photoshop through > help > update but this option is off. it is appear gray color. I couldn't click on it. please help me.

Mac Perpetual CS6 current version is 13.0.6 the subscription version is version 13.1.2. How are you trying to update to 13.1.?? do you have a Creative Cloud Subscription?
Supply pertinent information for quicker answers
The more information you supply about your situation, the better equipped other community members will be to answer. Consider including the following in your question:
Adobe product and version number
Operating system and version number
The full text of any error message(s)
What you were doing when the problem occurred
Screenshots of the problem
Computer hardware, such as CPU; GPU; amount of RAM; etc.

Hi I have had problems with photo's and films going onto a 2010 Apple classic MP3. Have managed to sort photos but it still refuses to copy the films purchased. It comes up with not copied cannot be played on this ipod.

Hi have had problems with photo's and films going onto a 2010 Apple Classic mp3. Have managed to sort photo's but the films won't copy and comes up with message videos not copied cannot be played on this ipod

razzbust wrote:
...but the films won't copy and comes up with message videos not copied cannot be played on this ipod
Self explanatory.
You could try creating an iPod version of the films.
Use CTRL and B to display the Menu bar shown above. Alternatively, use the ALT key, followed by the F key, the W key and finally the I (eye) key - that's (menu)/File/Create New Version/Create iPod or iPhone version.

Printing problems with InDesign CS3 running on OS 10.6

I recently upgrade my old G4 Mac (OS 10.4) to a new Mac Mini running OS 10.6.6. I am still running CS3 and have encountered only one problem. When I print multiple copies documents from InDesign that contain several layers, each copy is processed separately, so that it can take several minutes just to send the print job to the printer if I'm printing over 20 copies. Then once the print job is processed the printer pauses between every copy, which is tripling the printing time. If I print a simpler document with only one or two layers it processes all the copies at once, as it should. I am printing on an Okidata 6150 color laser printer.
I never had this problem on my old computer. I'm wondering if this is one of the "unsupported" bugs of running CS3 on Snow Leopard. I want to make sure that this is a problem unique to running CS3 with Snow Leopard before I go ahead and upgrade to CS4 or CS5.
computer: Mac Mini core 2 duo 2.4 ghz processors, 4 gb RAM, printer: Okidata 6150 DN color laser printer.

Hi again Peter
It is version 5.0.4. I updated it when I newly installed it a week ago in my new computer, and then again updated it just yesterday.
I might mention that before I got my new computer, I was running Mac OS 4.11, and was using InDesign 3.0. I had bought InDesign CS3 about a year ago, but hadn't gotten around to using it since version 3.0 had been working fine, and I was used to it. Then, when I got my new computer, I decided it was time to use the newer version. However, while using InDesign 3.0 with the old Mac OS 4.11, a printing problem popped up there, too, a few months ago... and it also involved printing problems with Adobe Reader. I contacted Adobe, and they sent me a patch which fixed it. I will contact Adobe again if need be, although I thought I'd start here first to see if it was a common enough problem that someone might be able to provide a free and routine answer.
Richard
Date: Tue, 15 Jun 2010 20:10:13 -0600
From: [email protected]
To: [email protected]
Subject: Printing problems with InDesign CS3 with Mac OS 10.6.3
I neglected to ask what version of indesign CS3 you are using. I also
notice that Mac OSX 10.6.4 has just been released. It actually
addresses some CS3-specific issues, though they seem to be related to
launching the apps, not printing. It may be worth trying to update,
nonetheless.
Peter Truskier
Premedia Systems, Inc.
510-655-4454
>

OSX 10.5.4: Still the same problems with Adobe CS3 files

I updated to OS X 10.5.4 on a latest generation 24" iMac with Adobe CS3 on it. This is the only Mac with 10.5 installed in a publishing company with 10 Macs, all with Adobe CS3 and all working always with files on the same file server. The other 9 Macs have OS X 10.4 installed.
The iMac with 10.5 had massive problems with CS3 files since OS X 10.5.2 - frequently existing Photoshop files disappeared from the server after the "Save" command, frequently "Save As" was not possible in Photoshop, sometimes Indesign crashed when files were getting saved on the server - none of this is happening on the other Macs with OS X 10.4.
On the first couple of days with 10.5.4 at least in Photoshop exactly the same problems: Existing files disappear from the server after the "Save" command, "Save As" is often times not possible.
It's a shame!

Hi
Why don't you try updating with the larger installer, the combo updater. The combo updater is generally more helpful when troubleshooting a problem.
http://www.apple.com/support/downloads/macosx1054comboupdate.html
Vic

AHCI Problems with DW CS3

I have problems with DW CS3 when I use the AHCI mode in BIOS.
Then DW can not start. But I need a solution. Since I do not want
to buy DW CS4 although this runs without any problems.

Yes...the pages from the book display perfectly in dw8, but
not in DWcs3.
I found that by commenting out the "clear:left;" under "#nav"
the page displays properly in DWcs3, too. That leaves open the
question of "why".
Thanks.

Colour Management Issue with PS CS3 and Leopard 10.5.2

Hi Everyone,
Since I have installed Leopard I am having colour management issues with Photoshop CS3 and my Canon i9950 printer.
My screen is calibrated with a Spyder and I used to ask Photoshop (in 10.4.11) to manage colour when printing and used the Spyder profile. Everything came out as I saw it on screen.
Now in leopard when I do the same thing everything comes out too yellow on the print. If I ask Photoshop to let the printer manage the colour it is too red. If I use the default colour management (photoshop managing the colour and it choosing the colour space it is better, but still too yellow).
Photoshop gives the hint to turn off colour management in the printer but there is no option for this and it also said the same thing before of course (when it worked in 10.4.11).
Any ideas?
Thanks.

>It was working perfectly in Tiger with the monitor profile.
You were lucky.
the monitor profile is so Photoshop can display your images correctly.
the working space is Adobe RGB, sRGB, BruceRGB, ect... these are all known color spaces so when the file goes to another computer there is a consistent color space for reference. If you use your monitor profile as a working space then nobody else knows what is going on with your file.
when you print you need to use the printer profile for the type of paper you are printing on this is supplied by the printer manufacturer. you can also have custom profiles made.
you need to read up on color management:
http://www.gballard.net/psd.html
http://digitaldog.net/

Problems with DW:CS3 and CSS Display

Similar Messages

Maybe you are looking for