Problems with Dynamic Link and Render Farm

We have a 10-node render farm that we use for all of our AE renders, and it works great, so we know the farm isn't the issue. But if we place a Premiere sequence into an AE file and attempt to send the After Effects file to the render farm, we get this error from every node:
"aerender Error: After Effects error: Failed to connect to Adobe Premiere Pro Dynamic Link."
Does anyone know of a possible workaround for getting an AE file using Dynamic Link to render to a farm? This is a very important workflow for us, and right now we're having to do local renders for any AE file that uses Dynamic Link.

Why not ask such questions in the AE forum? Aside from that, using AE and PPRo DL at the same time can easily exhaust all your system resources and may cause any kind of issues, as effectively only one connection is meant to exist at any given time. So it's definitely in the way you use it, but not necessarily "wrong", just an unfortunate combination that makes things unworkable.
Mylenium

Similar Messages

After Effects won't close/Problems with dynamic links

When I quit After Effects the icon still shows up and it says that it is still open, even force quit will not work. Also having problems with dynamically linked files between after effects and Premiere pro. Rendering in Premiere doesn't work unless I go to AE, save the project, then go back to Premiere. I have OSX Mavericks 10.9.2, a late 2012 mac pro, and AE CC 12.2.1.5

Kevin: would appreciate further thoughts on this.
I am using Pr2014, version 8.0.0 I am using AE2014, version 13.0.2.3. When I was on earlier versions of each, I had no problem importing AE comps into Pr. I'd choose import in Pr, then select the AE project, then select the comp. But with my new and improved versions of AE and Pr, I keep getting "importer reported a generic error."
I also tried to go the other way. I selected in Pr the clips I wanted to work on in AE, and then tried "replace with AE comp" but got the "generic error" message again..
Finally, I attempted to create a Dynamic Link from Pr via the File menu, but with each of the options from there, I got "failed to connect to AE Dynamic Link"
Any advice you can share, would be most welcome.

Is anyone else having serious issues with Dynamically linked clip render times in CC 2014.2

Short clips stalling and taking forever to render. Longer ones taking several hours???
I've noticed arbitrary little fixes, such as re-opening the after effects window, then going back into the premiere window causes the render to instantly speed back up in some cases.
A restart of the program I believe solves the issue too. As does simply rendering the clip out in after effects.
The problem is that I have long, overnight renders set up that need to run automatically. In this case, 9 clips, all about 30 minutes long. And pretty much all one long dynamically linked comp (I created a picture in picture effect in after effects compiling 2 30-minute video feeds, and then added some color correction). When I left at night, the total time kept creeping up and up to about 2.5 hours for one video. Even THAT sounds like a lot to me, but I let it go. I return to the computer 13 hours later, to see only 3 videos completed, and the one CURRENTLY in the queue saying over 6 hours remaining. I cancel the render.
I feel like there is some breakdown of communication between afx and premeiere happening here.
Anyone have any experience with issues like this?
Running PP CC2014.2 on a tricked out 2011 Macbook pro 17" OSX Yosemite

I'm on windows 7, and similar dynamic issues were a result of having two versions of the same app on the machine, and not associating the files to use the latest version, etc, or a version mismatch.
Another workaround is to close PPro and import the project into AME, rendering it from there.

Problem with dynamic LOV and function

Hello all!
I'm having a problem with a dynamic lov in APEX 3.0.1.00.08. Hope you can help me!
I have Report and Form application. On the Form page i have a Page Item (Popup Key LOV (Displays description, returns key value)).
When i submit the sql code in the 'List of vaules defention' box. I get the following message;
1 error has occurred
LOV query is invalid, a display and a return value are needed, the column names need to be different. If your query contains an in-line query, the first FROM clause in the SQL statement must not belong to the in-line query.
When i excecute the code below in TOAD or in the SQL Workshop it returns the values i want to see. But somehow APEX doesn't like the sql....
SELECT REC_OMSCHRIJVING d, REC_DNS_ID r FROM
TABLE(CAST(return_dns_lov_fn(:P2_DNS_ID) AS dns_table_type)) order by 1
returns_dns_lov_fn is a function, code is below;
CREATE OR REPLACE FUNCTION DRSSYS.return_dns_lov_fn (p2_dns_id number)
RETURN dns_table_type
AS
v_data dns_table_type := dns_table_type ();
BEGIN
IF p2_dns_id = 2
THEN
FOR c IN (SELECT dns_id dns, omschrijving oms
FROM d_status dst
WHERE dst.dns_id IN (8, 10))
LOOP
v_data.EXTEND;
v_data (v_data.COUNT) := dns_rectype (c.dns, c.oms);
END LOOP;
RETURN v_data;
END IF;
END;
and the types;
CREATE OR REPLACE TYPE DRSSYS.dns_rectype AS OBJECT (rec_dns_id NUMBER, rec_omschrijving VARCHAR2(255));
CREATE OR REPLACE TYPE DRSSYS.dns_table_type AS TABLE OF dns_rectype;
I tried some things i found on this forum, but they didn't work as well;
SELECT REC_OMSCHRIJVING display_value, REC_DNS_ID result_display FROM
TABLE(CAST(return_dns_lov_fn(:P2_DNS_ID) AS dns_table_type)) order by 1
SELECT REC_OMSCHRIJVING display_value d, REC_DNS_ID result_display r FROM
TABLE(CAST(return_dns_lov_fn(:P2_DNS_ID) AS dns_table_type)) order by 1
SELECT a.REC_OMSCHRIJVING display_value, a.REC_DNS_ID result_display FROM
TABLE(CAST(return_dns_lov_fn(:P2_DNS_ID) AS dns_table_type)) a order by 1
Edited by: rajan.arkenbout on 8-mei-2009 14:41
Edited by: rajan.arkenbout on 8-mei-2009 14:51

I just had the same problem when I used a function in a where clause.
I have a function that checks if the current user has acces or not (returning varchar 'Y' or 'N').
In where clause I have this:
where myFunction(:user, somePK) = 'Y'
It seems that when APEX checked if my query was valid, my function triggered and exception.
As Varad pointed out, check for exception that could be triggered by a null 'p2_dns_id'
Hope that helped you out.
Max

Connect problem with db link and scheduler_jobs on 10.2.0.4.0

hello guys
i have got this problem, i hope someone can help me to understand and solve it.
I have a pl/sql procedure where is referenced a table on a db_link. I own all the grants needed, and if i recall it in an anonymous block, it seems to work.
i.e
create or replace procedure routine_1 is
v_app varchar2(1);
begin
select 'x'
into v_app
from other_user.some_table@my_db_link
where rownum<2;
end routine_1;
Instead, while recalling it from a job scheduled with dba_scheduler package, with the same user, while opening the cursor where the db link table is referenced, i got a connect error:
ORA-01017: invalid username/password; logon denied
ORA-02063: preceding line from xxxxxx (where xxxxxx is the db link)
i would like to understand where i am mistaking. I already checked the user for the connection in the scheduled job and is the same of the anonymous block call.
thanks in advance
Claudio

hello dracis
thanks for the new answer.
i have not access to metalink. Anyway, oracle version is 10g not 11.
Anyway, about dbms_job package (Scheduler is the newer version of dbms_job), i found a phrase on a site saying this:
"Jobs that reference database links will fail if the database link is not fully qualified with the username and password. This is another subtle consequence of the execution environment of jobs."
Probably the cause is that the db link, to work, must be owned by the same user that owns the procedure where is referenced. In this way we hope ownername and password are in some way accessible.
We are trying to check this solution, but we have to wait for some grants.
Claudio

Oracle 9i, Rel.2 - Problems with dynam statement and cursor

Hello,
I have the following problem with Oracle 9i, Release 2:
I have a SQL-statement, which I create with the help of a configuration table. That means I don’t know how this statement looks at runtime. It could be look like this:
SELECT Att1, Att2, Att3
FROM Tab1
or this…
SELECT Att1, Att2
FROM Tab1
or this…
SELECT Att1
FROM Tab1
etc.
That means I don’t know in advance how many columns will be in the select-clause.
Here my code snippet until here:
v_query_str := 'SELECT ' || v_select_clause_str
|| ' FROM cb.' || v_table;
,,v_select_clause_str" willl be created dynamically
,,v_table" is as well from the config-table
Now I want to iterate through the result of the query and do further processing.
For this reason I wanted to use a cursor, iterate through the rows and save every value of each row in an own variable (but I don’t know the number of columns!!!).
But how can I open a cursor and iterate through it without knowing the number of columns???
The following code is NOT working:
TYPE t_dataColumnComp IS TABLE OF VARCHAR2(200);
a_dataColumnComp t_dataColumnComp;
--here I create the query…
v_query_str := 'SELECT ' || v_select_clause_str
|| ' FROM cb.' || v_table;
OPEN c_tempAtt FOR v_query_str;
LOOP
FETCH c_tempAtt INTO a_dataColumnComp; --THIS DON’T WORK
EXIT WHEN c_tempAtt%NOTFOUND;
FOR i IN 1..a_dataColumnComp.COUNT
LOOP
DBMS_OUTPUT.PUT_LINE(a_dataColumnComp(i));
END LOOP;
END LOOP;
CLOSE c_tempAtt; --close cursor variable
Regards
Homer

You will need to use DBMS_SQL to handle this since the number of columns in the result set is not known until runtime.
See here for an example of using DBMS_SQL:
http://asktom.oracle.com/pls/ask/f?p=4950:8:::::F4950_P8_DISPLAYID:235814350980

Problem with Dynamic Link

I originally had premiere pro cs4 and later for production premium. When trying to replace with After Effects Comp, I get the error message, "Adobe Dynamic Link requires Production Premium"
I contacted customer service and they pointed me to a thread here that discussed the clean script. So, I uninstalled production premium (I had uninstalled premiere pro before ever installing production premium) and ran the clean scipt database utility. After choosing the language and agreeing to the terms, it says that no entries are found, so nothing happens. Is this a Windows 7 issue? I assume its trying to wipe the registry.
Help would be appreciated. I'm getting a CS5 upgrade soon, but hopefully I can fix this issue before this happens.
Thanks.

When I did it, I did reboot and tried running it again, but I don't think it is doing anything. It says its not finding anything installed when I run the clean script. I'll try again and reboot and repeat 2 more times than last time, but it just takes a long time to reinstall the product.
What do I do if this doesn't work?

Problem with bb link and z10

hello, i´ve try to connect my z 10 to pc whith bb link and i can t, it stays a lot of time thinking, and nothing. how can i do a backup copy of my z 10 whitout bb link, and why in the divice bb protect don´t allow backups?

Hi pleandro,
Can you provide a bit more information please so I can better assist?
What version of BlackBerry Link do you have installed and what version of Windows OS do you have?
Are you connecting via usb or Wi-Fi?
Have you tried using different usb cables and usb ports?
Are you signed into BlackBerry Link with the same BlackBerry ID you are using on your BlackBerry Z10 smartphone?
I look forward to your response.
-FS
Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.
Click Solution? for posts that have solved your issue(s)!

Suid: Problem with dynamic linker

Hi,
i have a multithread program that is compiled with the additional option "-xarch=v8plus". The consequence is, that the following library
/usr/lib/cpu/sparcv8plus/libCstd_isa.so.1
is linked.
When i set the permission "suid" to the programm and call the program with an other user the library is not linked at all.
Following efforts failed:
- library copied to another directory and compiled with the option "-R" and the same directory
- compiled with the option "-R /usr/lib/cpu/sparcv8plus/libCstd_isa.so.1"
- use of command "crle -c /var/ld/ld.config -u -s /usr/lib/cpu/sparcv8plus"
Can anyone help me please?
Has anybody experience with this or similar problem?
Many Thanks in advance
thomas

You have run into a security feature of Solaris.
First let me say that you should never use -R or -L directive that point into system library areas, or into the compiler installation area. It can prevent the right libraries from being linked. Using the LD_LIBRARY_PATH environment variable or equivalent operations like crle is usually not a good idea, for similar reasons.
Now I'll explain about the libCstd_isa.so.1 library.
A feature of Solaris allows specifying a basic shared library, with automatic overrides by libraries customized for a particular hardware version, or Instruction Set Architecture. We use this feature for the implementation of the string class in libCstd. The string class in this library uses a reference-counted implementation, which requires updating usage counts as an atomic operation in multi-threaded programs.
Prior to the v8plus architecture (UltraSPARC), there was no atomic operation available for such synchronization. The basic version of the library uses a thread mutex, which is expensive. For v8plus and better, we use the CAS instruction for synchronization, avoiding the need for a thread mutex. The v8plus version of the string code is in libCstd_isa.so.1. The basic libCstd.so.1 (filter) library is built to interpose (filtee) library libCstd_isa.so.1 when running on a v8plus system (or better). No program contains a dependency on the ISA library. It is accessed only via the filter/filtee mechanism.
A setuid program is assumed to have security issues -- why else would it need to run as a specific user? For secure programs, the runtime loader ignores preload or filter requests for libraries that are not in the /lib/secure or /usr/lib/secure directories. Otherwise, the author of the secure program could not be sure that the intended versions of libraries were being used.
I can think of only two solutions for you:
1. Find a way to avoid making the program setuid, or
2. Build the program with -xarch=v8 instread of v8plus.

Ora-12154 problem with database link and transparent gateway

Hello,
I’m trying to make a communication between oracle and SQL server 2005.
I use oracle 10g E.E Release 10.2.0.3.0 and the transparent gateway for SQL server 10201_gatway_win32.zip.
Install:
The oracle database is installed into a server named ss-serv. This server has two partition disk C and E. Oracle database is installed in E and the gateway in C. There is already a database (instance) running in the oracle home (in E).
I configured the gateway as described into: http://download.oracle.com/docs/cd/B...3/conf_sql.htm.
In sql server 2005, there is a database running named ClientTricks.
I created a user named Avogadro with a login.
In the partition C where the gateway is installed, the file inittg4msql.ora is like this:
HS_FDS_CONNECT_INFO= ss-serv. ClientTricks
The file sqlnet.ora where the gateway is installed is configured like this:
SQLNET.AUTHENTIFICATION_SERVICES=(NTS)
NAMES.DIRECTORY_PATH = (TNSNAMES, EZCONNECT)
I configured the listener that is in the C partition where the gateway is installed, and the tnsnames that is in the oracle database in E partition disk like this:
Listener :
LISTENER=
(ADDRESS=
(PROTOCOL=TCP)
(HOST=ss-serv)
(PORT=1521))
SID_LIST_LISTENER=
(SID_LIST=
(SID_DESC=
(SID_NAME=tg4msql)
(ORACLE_HOME=C:\oracle\product\10.2.0\tg_1)
(PROGRAM=tg4msql)
tnsnames:
mytg4msql=
(DESCRIPTION=
(ADDRESS=
(PROTOCOL=TCP)
(HOST=ss-serv)
(PORT=1521)
(CONNECT_DATA=
(SID=tg4msql))
(HS=OK))
After edited the listener, I stop and start the listener for the transparent gateway from administrative tools in the services.
Then, connected in oracle (in a database named fakeclient) I created a database link in sqlplus.The the dblink were created, but when I tried to querry some data from ClientTricks by executing the following instructions:
select * from s_client@dblink
i got this fatal and terrible error :
ora-12154 TNS:could not resolve the connect identifier specified
I verified all my procedure and stapes, all seems to be good. I did a tnsping of mytg4msql
I got this error in the command prompt:TNS-03505 fail to resolve name
Could someone help me ?
Sorry for my English ,I’m French
best regards

Hi Mkirtley,
i clarify you what i've done:
Pease have a look in the link in my first post. Then, i said that in oracle database home the listener is in port 1521
here is this listener:
SID_LIST_LISTENER=
(SID_LIST=
(SID_DESC=
(SID_NAME=PLSExtproc)
(ORACLE_HOME=E:\oracle\production\10.2.0\db_1)
(PROGRAM=extproc)
LISTENER=
(DESCRIPTION_LIST=
(DESCRIPTION=
(ADDRESS= (PROTOCOL=TCP)(HOST=ss-serv)(PORT=1521))
(ADDRESS= (PROTOCOL=IPC)(KEY=EXTPROC0))
Here is the tnsnames.ora in oracle database home:
N.B in this ora file, there's already some descriptions for the database running, so i just add these lines under the description in ora file.Here is:
Jest=
(DESCRIPTION=
(ADDRESS_LIST=
(ADDRESS=(PROTOCOL=TCP)(HOST=ss-serv)(PORT=2000))
(CONNECT_DATA=
(SID=tg4msql)
(HS=OK)
for the listener of the gateway (installed in C partition):
SID_LIST_LISTENER=
(SID_LIST=
(SID_DESC=
(SID_NAME=tg4msql)
(ORACLE_HOME=C:\oracle\production\10.2.0\tg_1)
(PROGRAM=tg4msql)
LISTENER=
(DESCRIPTION_LIST=
(DESCRIPTION=
(ADDRESS= (PROTOCOL=TCP)(HOST=ss-serv)(PORT=2000))
(ADDRESS= (PROTOCOL=IPC)(KEY=EXTPROC1))
here are all i did.
Best regards

Problem with Archive Link and User ID

Dear Experts,
Currently we are attaching documents to business object using archive link feature through T code OAWD.
when user uploaded documents & when we try to search documents with Tr. code OAAD, we are not able to find from whcih User id documents got uploaded.
As per client requirement, we had to find from which user id documents got uploaded as around 10 user id's got authorization of uploading documents against same business object.
Even in individual Tcodes other than tr. code OAAD of business objects where documents are seen, we don't find User Id/Creator name.
any suggestions will be much useful...
Thanks in advance...

The standard archivelink tables (TOA*) do not gather this data. If this is a must have requirement then using single step workflow may give you the ability to capture this data within the workflow logs.
To create this scenario you would enable only the storage scenario "storing for subsequent entry" within the document presettings via OAWS. Then when a document was uploaded it would create a "workitem" that is sent to the agent id. Default will be user if no setting was created in OAWS.
The user would then have to go to their SAP workplace inbox to execute the work item and "link" the document to the transaction.
This scenario is sometimes referred to as "early archiving" by old timers like myself.
It is most often used in Accounts Payable scenarios where a central shared scanner is passing out many work items to a larger group.
From TAO* Tables we can use SAP_OBJECT to Identify Invoices with PO by object BUS2081 or invoices without PO by object FIPP. From the field OBJECT_ID we can match a specific invoice number. BUS2081 shows invoice number + fiscal year as the Object id. FIPP shows Company code + invoice number + fiscal year. The ARC_DOC_ID field gives us the unique document identification string for the scanned image. AR_DATE = the date the work item is completed. This is when the invoice document is “parked”.
A selection from table SWWLOGHIST searching for METHOD SWW_WI_STATUS_TO_COMPLETED and METH_EDATE = to AR_DATE from TOA* Table (26.06.2012) and PARA_VAL_1 = *ARC_DOC_ID* (*aaaakkjdx1ce6yn3e3aacaerb12zi*) will provide output from which you can gather the work item ID.
Select WI_ID then query table SWWWIHEAD for overview status of item.
From table SWWWIHEAD you can gather such information on the work item as the work item creator WI_CREATOR, the work item status WI_STAT, creation date WI_CD, completion date WI_AED, and work item agent WI_AAGENT.
The WI_CREATOR will be the user who "created the workflow item" for your report.
This a the "long way around" to overcome this lack of data being gathered by ArchiveLink documents.
I hope this late answer is helpful for someone.

Hello I have a CS5 Master Collection with Dynamic Link problems

Hello Adobe,
I had no problems with CS5 Master Colection, but after 1 week Encore dont work, the problem is, Dynamic lInk is not wordking.
I deinstall all Adobe products and use the adobe creative suite cleaner tool and after that I make a register cleanup.
Then I Start up windows 7 Pro 64 Bit Agan and install de CS5 Suite, but after that the same problems with Dynamic link apear
I hope anyone have an solution!!

Refer to this:
http://myleniumerrors.com/?s=25+%3A%3A+101
Different program, but similar causes...
Mylenium

Problems with Dinamic Link between Premiere pro CC and After Effects CC

I'm having serious problems with dinamic link between premiere pro and after effects, really serious problems that have 2 big projects in trouble (a documentary and a video clip) and I had to redo all the work pipeline to the consumer.
The documentary for a spanish TV was made on CC 2014 and a video clip was made on CC. Both of them with a lot of after effects composition in the premiere pro timeline. Render freeze, a lot of playback issues, and many more problems... Until I decided to remove these links between premiere and after effects and render out all the after effects compositions one by one and insert as clips in premiere pro. 1 week working away with back and fourth.
I've got a huge workstation:
i7 4990
32Gb ram
GTX780 3gb
256 gb system ssd
2 Tb project storage
*All my hardware and software are update.
I know that a lot of folks are on the same huge problem and I want to ask everyone:
How do you save this?
What is your pipeline?
Are there any solution?
Best practice to use dinamic link in a huge project?
Thanks,
Ruben Gimenez.
R&D iceblink.es
www.rambot.es

Thank You, Jim -
Unfortunately that specifically did not work.
Based on another comment sent to me, here is what did.
In PProCC
File > Adobe Dynamic Link > New After Effects Composition
In AECC
From that composition created from PPro, I imported the project (aep) initially created in AECC from another team member. Saved the file.
Back in PProCC
File > Adobe Dynamic Link > Import After Effects Composition
Magic.

Issue with Dynamic Link with Premiere CC and After Effects

I'm having a strange and annoying issue with Dynamic linked clips in Premiere CC:
When I render or export my timeline the progress will stall when it hits a dynamic linked clip. It will stay stalled until I click the After Effects application and make it the active window. Once that happens the render/export resumes at normal speed.
This is annoying as I can't start a render and walk away or work on different windows, I have to babysit all the renders to make sure they go through.
Has anybody experienced this and know of any solutions?
I'm running the latest version of Premiere (7.2.1) and After Effects 12.2.0.52 on Mavericks 10.9.1 with a GTX 770 Video Card.

Does it still pause if AE is closed completely? I often experience slower AME renders from Premiere over dynamic link material when AE is open. Closing AE speeds things up. Go figure.

Hi guys. i have some problem with a link from a pdf on-line,when i click on it,the page adds a "%" at the and of the link and says "page not found" because of it

Hi guys. i have some problem with a link from a pdf on-line,when i click on it,the page adds a "%" at the and of the link and says "page not found" because of it.
This happens only when a load my pdf file on my server, because if i click on the link when the file is on my iPad, the page opens without problem.
Any help please?
thanx

the % sign is often used when there's a space in a name. HTML doesn't like spaces so it fills them with % or %20
try, on the end of that link, see if there's a space built into the page or the link when the page was made
On the web address you may be able to 'backspace' at the end and erase that space to get the address, but whomever made the page possibly put a mistake in the link

Problems with Dynamic Link and Render Farm

Similar Messages

Maybe you are looking for