Problems with end tiltles

hey everyone,
i am just about to finish a documentary. on the end we want to have the classic rolling title (credits), that my director made in after effects and exported as a quicktime file. it runs slowly from bottom to top.
but it jitters!! i de-interlaced it but that didn't do the trick. we watched it on a cinema projector as well and there it jitters too!!??
well, i remembered that someone warned me about that, so it seems to be a common problem, but i don't know what to do about it!
can anyone help!?
thanks

Well I'll highlight some words from your post that clearly show the source of you problem.
andy fb wrote:
that my director made in
You need the speed (rate) of the roll (Y pixels moved in n seconds) to be an evenly divisible number of your scan rate. Back in the day when I used AE I would remember the number, but you can't really fix it after its be rendered. Mostly I just use Motions prebuilt credit roll behavior.
o| TonyTony |o

Similar Messages

Problem with End button

Hi,
We are facing a problem with the "End" button of IC Webclient(CRM 4.0). After confirming the contact, when we tried to end the contact using End button. It is not working.
Please help us as it is very urgent.
Thnks
YWa

Hello Yang,
1. Go to transaction SE80.
2. Select BSP Application: CRM_IC.
3. Open 'Page Fragments'.
4. Open the file WorkspaceBarPage.htm and go to edit mode.
5. Change the coding in WorkspaceBarPage.htm line 171 like in note 675512
Hope this will solve the problem
Best Regards,
Srinivas.

Having problems with ending my calls on iphone 5

When I try to tap end call on my phone the screen goes blank when I take it away form my ear? It will not let me hang up?

Sounds like a problem with the proximity sensor, which turns off the screen when on a call with the phone is near your face/ear and should turn it back on when the phone moves away again. Try cleaning the screen, especially near the top by the speaker. Also try removing your screen protector.

Is there a problem with ending a URL with somefile.swf?

I have a swf button that launches a new window (ex: http://domain.com/index.html) with the javascript:new.window method. I am finding that sometimes (1 or 2 times out of every 5 clicks) the window is nothing but blank white. I have found, by mistake, that if the javascript:new.window launches directly to (http://domain.com/somefile.swf) then it works everytime.
I think the problem with the blank browser window might be related to slower Internet connections. I can't seem to find anyone else with the blank browser window issue, so I'm wondering what side effects or problems might arise by using the swf as that url instead of an html file that runs the swf.
Flash player detection?
Could a browser decide to download the file (for saving) instead or running it?

I can't quite say what the issue with your swf not loading in the html is. It almost sounds more like an issue of the swf not loading.
If the user has Flash Player installed on their machine (which they should if they are getting your original button) then you probably don't have to worry about the browser trying to download the swf - its probably not going to.
What you might want to be more concerned about is window resizing. If the user can resize the window from the specified size in your js (if you have any) than Flash Player will resize. If the user extends the window beyond the height OR the width, then anything on stage but out side of the fla stage bounds will be visible. You can constrain the size in your js, and set resize = no.
But mainly, youre perfectly fine linking directly to the swf if that is all you need.

Problem with End to End JHeadstart Tutorial ( Error: No XMLProvider found )

Good day,
When executing the step-by-step tutorial as listed at:
http://www.oracle.com/technology/consulting/9iServices/jheadstart.html
, I am following the "End to End JHeadstart Tutorial" ( http://www.oracle.com/technology/products/jdev/tips/muench/jhstutorial/index.html ):
I am getting an error "Error: No XMLProvider found" for C:\MyDemo\ViewController\public_html\WEB-INF\page\Employees5Table.uix at step 1d when I try to run the application at point 1d of the tutorial.
The particular file Employees5Table.uix has been generated in step 1c by doing a Run JHeadstart Application Generator for the ' Application Structure File' .
Can anybody provide me more information?
Regards,
Mike

Problem solved by using release 1!
I was using JDeveloper 10.1.2.1.0.1913 (JDeveloper 10.1.2 release 2, build 1913) instead of system10.1.2.0.0.1811 (JDeveloper 10.1.2 release 1, build 1811).
When I did it againg with the release 1 version, build 1811 the problem did not occure. The JHeadstart version was the same.
Looks like a bug to me in in release 2.

Problem with End separator in Sender FCC channel

Hi Experts,
If i use a special character as field separator it is working.The same character is not recognized as end separator.
We tried all different options ,still its not working.
Thanks,
Karthikeyan.

Hi Aamir,
We tried with single quotes and also as Hex values too.
As mentioned earlier, it is working as Field separator not as end separator.
Thanks,
Karthikeyan.

Problems with End User License Agreement

In April this year after trialling Acrobat Pro I decided to take out a year's sub to Acrobat Create. Since that time however I have been unable to open any pdf clicking on a web based (e.g. Google) url. Each time the following message appears - "Before proceeding you must first launch Adobe Acrobat and accept the End User License Agreement." I have of course downloaded Acrobat Reader but it makes no difference.
How do I resolve this problem please?

Can't click Accept | Acrobat, Adobe Reader
Mylenium

Problem with end seperator in file content conversion parameters

Hi All
I have a proxy to file scenario, and i am writing the file using file content conversion.
In my message type, there can be multiple object records in a single data record, as shown here:
<Data_Record>
<Field1>111</Field1>
<Field2>222</Field2>
<Object_Record>
<Field3>333</Field3>
<Field4>444</Field4>
</Object_Record>
</Data_Record>
Recordset Structure: Data_Record, Object_Record
Content conversion parameters:
Data_Record.fieldseperator: ,
Data_Record.end_seperator: 'nl'
Object_Record.fieldseperator: ,
Object_Record.end_seperator: 'nl'
My requirement is, every data record should be followed by new line character and every object record should be followed by new line character:
111,222(new line character)
333,444(new line character)
But, my current output is:
111,222,333,444(new line character)
The problem is, as the data record ends only after object record, i am getting new line character only after object record. (technically, the end tag of data record occurs only after the end tag of object record).
Now, how can i get a new line character after data record and after object record?
Thanks
Chandra

Hi Sekhar,
We know the input which you are trying to use(in XML ).
Can you please tell us the output which you are expecting here after using ContentConversion at receiver side.
Regards,
Prakash.

Problem with end-of-Quiz feedback...Captivate 5.5

I've created a short course with a quiz. At the end of the quiz, i would like to have the learner go to one of two slides (one for pass - the other for fail). From the "pass" slide, I would like them to click a button where a PDF certificate will open. The "fail" slide will let the user review the content of the course.
Currently, my file will show the "pass" slide, but will advance to other slides when the button is clicked to print the certificate.
Thus far, the "fail" actions are acting as expected.
Can anyone give me suggestions of how I can fix my file?

Select the slides you want to hide in the Filmstrip, use the right-click menu to hide them. But it is not possible to show a slide by an advanced action, here I do not know what is meant at all? You can skip a slide using a statement Jump to, but a hidden slide will simply not been included in the published version, no way to get it back once the SWF (or other output) is created.
Another remark: be very careful with actions executed 'On exit' because they will only be done if the last frame of the slide is also reached. That is not always the case, if you have an interactive object that has Success/failure actions to go to another slide the last frames after the pausing point of that object will never be visited and the On exit action not be executed.
Lilybiri

Problem with ending user session in backend with BSP

Hi,
I'm having this strange problem. When I use the standard SAP Budgeting Maintenance BSP application for Enterprise Compensation Management, whatever sessions I have opened doesn't close it automatically in the backend system when I close the BSP application. It leaves my sessions open for a few hours.
I'm using the standard BSP functionality for Budgeting Maintenance, without any sort of modifications whatsoever.
Anyone else have this problem? Perhaps there's a OSS note out there somewhere.....
Thanks.

Hi,
the problem is, that the system gets no session exit.Are you are calling the right page for the applifcation entry point?
If yes, try the following:
Go SE80, have a look at the BSP-Applidcation 'SYSTEM' and the instructions in the page 'session_single_frame.htm'.
Copy the whole BSP-Application in your namespace.
Now, when leaving the Budget-Application, a sessionexit-page will be called, which correctly terminates the session.
Best regards,
Stefan

Problems with end of Podc

Hi All, I have a Creative Zen 8GB. Downloading podcasts are fine. However when listening to them it stops without warning 45-60 seconds before the end. It just goes back to the beginning
Have I done anything wrong?

I suspect that this is a firmware bug. If you are using Zencast Organizer:
-Connect the ZEN to the PC.
Select the podcast then choose the "Transfer" icon.
-The "Convert audio items and picture items into ZENcast videos" box
will be checked by default.
-Uncheck the "Convert audio items..." box. This will place the podcast
into the Music Library folder rather than the Video/ZENcast folder.
The entire file will now play back .

Problem with index of numbers in BSP Front end

Hello All,
I am facing the below problem. Request your help.
Scenario: When I am trying to add the projects in the Front end , I am facing the problem with the index of numbering of the projects.
Example: If I am adding 6 projects ( at the max only 4 on each page i-e there are 2 pages ), then the index is wrongly numbered and the arrow (for direction of the pages) are wrongly displayed. The direction of the arrow is pointed to the next page rather pointing to the previous page and the index of numbering of the pages is wrong.
Request you to please suggest if this is any code fault in the table maintainance activity in the backend (BSP).

Hi Irina,
If you mean the number range is skipping 10 numbers in between runs then its because of the buffering in the number range.
To avoid the buffer influencing the number range, pass
'X' to the function module parameter: IGNORE_BUFFER.
This should resolve the problem.
Cheers,
Aditya

Problem with keyframe effect - at start and end (crop and scale)

I'm having this odd problem with keyframe effects.
Setup:
I have a gif image that I have on video 1 for say 2 minutes.
I have my real video on video 2. It is a person talking.
First I start with my video full size on top of video 1.
Though the motion and cropping keyframe management I slowly reduce the scale and crop my video image so that it is reduced to the lower left bottom of the screen, on top of the gif, which is now revealed.
My problem is at the start and end of the transition from full video to small box on lower left on top of my gif I often get 1-2 frames where the video goes blank and/or I get a bunch of random red bars on black background appearing on the video - Or I get the gif from video 1 without the video 2 at all (it disappears).
I've tried moving my start of end of the transition to skip the bad spots - but these new transition starts or ends not get their own bad spots in the same way. Its only a couple of frames but it's really unacceptable for the finished video.
Note, when I say transition here I don't mean real transition events, but rather the start of effects that are managed with keyframes. My move from start to end of the effect runs for about 4-6 seconds.
Any ideas?

Bill,
Here is more detail and screen captures.
Concept:
I have 3 minutes of video. It contains a person making a speech. During parts of the speech I want to reveal a graphic image that will be discussed. The speech will begin with the speaker full screen. Half way in, the speaker will shrink down to 45% in the lower left corner of the screen. While the animation occurs (the shrink, move and cropping) it will reveal the graphic below. The graphic will take up the full screen with the speaker at 45%.
Technique:
I put the video in Video 2 and the graphic, a GIF image in Video 1. The scene begins with the speaker talking at full screen. After a minute, I animate the move of the speaker using Motion: Scale and Position and Effect: Crop changing Top, Bottom, Left and Right sides. The animation occurs over approximately 8 seconds.
I am manually adding keyframes at the start and end of the animation. I set the ending state of the video image in the end keyframes. The interpolation between these start and end keyframes should be managing the animation.
Problem:
At the beginning and end of the animation – usually 1-3 frames from the start and 1-3 frames from the end, where the change has barely begun or almost ended, I get these problems. On some frames, the video (in Video 2) completely disappears only showing the Video 1 GIF image below. On other frames, the video image turns black with horizontal red bands half way across.
Troublshooting:
I’ve tried deleting all start and end keyframes and moving the start and end earlier or later to see if I can fix this, but the problem continues to show up in these new locations.
I have added a few screen shots.
1:32:15 is the start of the animation change and 1:40:22 is the end of increasing from the mini video speaker to full size (on top of the GIF).
At 1:40:16 the video image completely disappears only showing the GIF below.
At 1:40:17 its back and slowly increases in size through the interpolation until it is full size at 1:40:22.
Let me know if you need anything else.
Thanks!
Evan

TS1646 hello I have problem with regist my visa and I cannot buy from store the message came in the end of form is says the phone number must be a 7-digit number and I have writed but not accepted iam from saudi arabia my mobile is 966504850992 pls answe

hello
I have problem with regist my visa and I cannot buy from store
the message came in the end of form is says
the phone number must be a 7-digit number
and I have writed but not accepted
iam from saudi arabia
my mobile is 966504850992
pls answer
thanks
dfr aldossary

Wow, Karan Taneja, you've just embarrassed yourself on a worldwide support forum. Not only is your post ridiculous and completely inappropriate for a technical support forum, but it also shows your ignorance as to whom you think the audience is. Apple is not here. It's users, like you.
If you would have spent half the time actually reading the Terms of Use of this forum that YOU agreed to by signing up to post, as you did composing that usesless, inappropriate post, you (and the rest of us on this forum) would have been much better off.

Friends, i have a problem with safari . Whenever i am typing in the safari main bar , so in the halfway through the typing my sentence/words are shifting to another main google search and in the end i have to type again in google

Friends,
i have a problem with safari . Whenever i am typing in the safari main bar , so in the halfway through the typing my sentence/words are shifting to another main google search and in the end i have to type again in google. I have attached a sample screenshot of the safari problem which i am facing. In this particular example i wanted to write Print Screen, however halfway,my typing automatically shifted to google bar?? can you guys help me.

Please read this whole message before doing anything.
This procedure is a diagnostic test. It won’t solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of this test is to determine whether the problem is localized to your user account. Enable guest logins* and log in as Guest. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
While logged in as Guest, you won’t have access to any of your personal files or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
Test while logged in as Guest. Same problem?
After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
*Note: If you’ve activated “Find My Mac” or FileVault in OS X 10.7 or later, then you can’t enable the Guest account. The "Guest User" login created by "Find My Mac" is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.

Problems with end tiltles

Similar Messages

Maybe you are looking for