Problems with entering verification code for iCloud on both mac and iPhone
Hello Apple, I am a totally blind mac user and wish to use iCloud keychain. I tried to set it up both on my mac and IOS device so that they can sync all of my account information, but have no luck. Every time I want to set up my iCloud, I have issues because it asks me to verify my identity with apple support. When I click the link to the iCloud support page, there is no way I can contact apple directly or fill out forms to verify my account. I would love to use the iCloud keychain to keep track of my accounts. What should I do in this case?
Any suggestions are welcomed.
Thank you very much.
If you need to contact iCloud support, you can reach them by clicking Get Started here: http://www.apple.com/support/icloud/contact/.
Similar Messages
-
I having problem with the answer question for the App Store. And I forgot the answer
I having problem with the answer question for the App Store. And I forgot the answer
Pleae call 1800MYAPPLE ask to speak to account security
-
How to change two different iCloud account from mac and iPhone?
How to change two different iCloud account from mac and iPhone?
Pick one to use, abandon the other.
-
ICloud tabs for Safari work between Mac and iPhone 5 but not iPad 3
All my devices are signed in with my same ID account. My Mac and Iphone 5 are communicating just fine but my iPad 3 is not receving or sending its iCloud tabs. Safari is enabled in the iCloud setting on the iPad and private browsing is not enabled on any device. Whats wrong?
Try going to Settings>iCloud on your iPad and turning Safari Off, then back On.
-
I have 2 email addresses (1 mac.and 1 blueyonder.) each with separate identities and passwords. I am forever getting asked to verify identity and/or passwords and having these refused and me then having to set up new ones. Can I combine my email addresses to a single Apple Identity and Password? If yes then How?
Any help much appreciated as this is driving me crazy!Depending on what you're asking...
There is no means to merge Apple IDs. You can change the mail address assocaited with your Apple ID, so you might switch to using and purchasing from one email address, and using the second as a backup. (There's no means to merge the purchases, and related baggage.)
While I'm guessing this was about Apple IDs, for completeness... Combining the mail messages involving multiple email addresses is separate from the Apple ID; that is usually done with some combination of notifying the senders or with the forwarding of messages from one mail server to the preferred server. Or running multiple mail accounts in parallel, depending on what you are up to. -
I'm trying to help set up a new iPad but it will not send me or cannot receive the verification email so I can set up iCloud what can I do?
Hello Slordan2012
Log in to appleid.apple.com and resend the verification email to then verify the address. If you cannot get pass that, then you can always force the restore on your iPad and then enter in the password to bypass trying to turn it off.
Apple ID: Associating and verifying email addresses with your Apple ID
http://support.apple.com/kb/he68
If you can't update or restore your iOS device
http://support.apple.com/kb/HT1808
Regards,
-Norm G. -
Problems with using sample code for WebService client
Hi <br /><br />Ive downloaded the sample code from the Adobe <br />website but when i run the client i get an error which i dont understand:<br /><br />client side:<br />ERROR: java.lang.NullPointerException<br />AxisFault<br /> faultCode: {http://schemas.xmlsoap.org/soap/envelope/}Server.userException<br /> faultSubcode: <br /> faultString: java.lang.NullPointerException<br /> faultActor: <br /> faultNode: <br /> faultDetail: <br /> {http://xml.apache.org/axis/}hostname:GRFNZTS1SRV<br /><br />java.lang.NullPointerException<br /> at org.apache.axis.message.SOAPFaultBuilder.createFault(SOAPFaultBuilder.java:222)<br /> at org.apache.axis.message.SOAPFaultBuilder.endElement(SOAPFaultBuilder.java:129)<br /> at org.apache.axis.encoding.DeserializationContext.endElement(DeserializationContext.java:10 87)<br /> at weblogic.apache.xerces.parsers.SAXParser.endElement(SAXParser.java:1411)<br /> at weblogic.apache.xerces.validators.common.XMLValidator.callEndElement(XMLValidator.java:16 13)<br /> at weblogic.apache.xerces.framework.XMLDocumentScanner$ContentDispatcher.dispatch(XMLDocumen tScanner.java:1174)<br /> at weblogic.apache.xerces.framework.XMLDocumentScanner.parseSome(XMLDocumentScanner.java:399 )<br /> at weblogic.apache.xerces.framework.XMLParser.parse(XMLParser.java:1138)<br /> at weblogic.xml.jaxp.WebLogicXMLReader.parse(WebLogicXMLReader.java:135)<br /> at weblogic.xml.jaxp.RegistryXMLReader.parse(RegistryXMLReader.java:133)<br /> at javax.xml.parsers.SAXParser.parse(Unknown Source)<br /> at org.apache.axis.encoding.DeserializationContext.parse(DeserializationContext.java:227)<br /> at org.apache.axis.SOAPPart.getAsSOAPEnvelope(SOAPPart.java:696)<br /> at org.apache.axis.Message.getSOAPEnvelope(Message.java:435)<br /> at org.apache.axis.handlers.soap.MustUnderstandChecker.invoke(MustUnderstandChecker.java:62) <br /> at org.apache.axis.client.AxisClient.invoke(AxisClient.java:206)<br /> at org.apache.axis.client.Call.invokeEngine(Call.java:2784)<br /> at org.apache.axis.client.Call.invoke(Call.java:2767)<br /> at org.apache.axis.client.Call.invoke(Call.java:2443)<br /> at org.apache.axis.client.Call.invoke(Call.java:2366)<br /> at org.apache.axis.client.Call.invoke(Call.java:1812)<br /> at com.adobe.livecycle.samples.pdfgenerator.axis.PdfGenSoapBindingStub.getConfigurationXML(P dfGenSoapBindingStub.java:373)<br /> at com.adobe.livecycle.samples.pdfgenerator.webserviceclient.WebServiceClient.generatePDF(We bServiceClient.java:174)<br /> at com.adobe.livecycle.samples.pdfgenerator.webserviceclient.WebServiceClient.main(WebServic eClient.java:95)<br /><br />and on the server side:<br /><Error> <com.adobe.idp.um.businesslogic.authentication.AuthenticationManagerBean> <000000> <UserM:GENERIC_ERROR: [Thread: ExecuteThread: '58' for queue: 'default', hc: 735284715 ]No Auth Providers found > <br /><Sep 17, 2007 8:27:43 PM IDT> <Warning> <com.adobe.idp.common.errors.exception.IDPLoggedException> <000000> <UserM:GENERIC_WARNING: [Thread: ExecuteThread: '58' for queue: 'default', hc: 735284715 ]| [AuthenticationManagerBean] errorCode:12801 errorCodeHEX:0x3201 message:No Auth Providers found in Config>
i get this exception
C:\Program Files\JMF2.1.1e\bin\video>javac FrameAccess.java
C:\Program Files\JMF2.1.1e\bin\video>java FrameAccess C:\Program Files\JMF2.1.1e
\bin\video\gtrevor.avi
Failed to create a processor from the given url: javax.media.NoProcessorExceptio
n: Cannot find a Processor for: C:\Program
how to solve it -
IMessages in mountain lion not syncing with both mac and iPhone. Why?
I either get someones imessage on my iphone or my mac, but not the same message on both. Anyone know why? I thought iMessage was supposed to "pick off where you left off... on all devices."
I see now. OK, I do think I messed up the settings a bit. I have a @mac.com and a @me.com address with the same name. My Apple ID uses my @mac.com address, but I set up the Messages app on 10.8 to use my @me.com.
I tried switching over to @me a while back because I wanted to reserve the Messages for close friends and family only. Now I see there is no way to turn off the "reached at" address for my main Apple ID @mac.com account. I'd prefer to use ONLY the @me (which is not my Apple ID), but Im guessing this is not possible. -
I have partitioned my time capsule, as I want part of it to act as a media server for both mac and windows. However I don't know what format that I need to partition it to. I also can't make it a permanently accesible drive. I want to restore the drive to the original format (which I don't know) and start again and re-partition the drive in a format that can be used for media by both mac and PC and for time machine back-ups and make the media part of it permanetly accesible so I can add and acccess my files.
ThanksYou are mixing up a couple of things here.
The TC drive cannot be partitioned without removing it.. did you do that?
If you partition it you must use a Mac disk utility and use the HFS+ ie standard Mac format. And GUID partition table not windows type.
You can select erase disk in the airport utility.. that will take the disk back to original format. No partitions. TC is deliberately not partitioned as it is not a media server.. it is a backup device for TM. Over time .. the disk will be filled with TM backups so you have a long history of file changes to your computer.
There is no media server in the TC.. it is merely disk storage.. you can serve files from it to a media device.. but the TC itself is dumb as dumb.
Now the actual format of the drive is irrelevant to the PC.. The TC offers SMB file services to the network. You can copy files to and from the TC as if it was a local disk without caring one iota about the format. The TC handles that .. it is not a local disk .. it is a network drive.
Although you cannot partition the TC. you can still copy files to it.. this does have implications for TM.. but as long as there is plenty of free space should not be a major issue.
You can create a disk image via the disk utility in a Mac.. and as stated you can create partitions if you do it on a Mac with the disk directly connected which means breaking warranty if any exists on the TC. -
Best air print photo printer for mac and iPhone
looking to purchase a new all in one photo printer for both mac and iphone, any recomendations
If you want a really good fast printer I recommend the Office jet Pro 8600
-
Easiest way to use one bt device with mac and iPhone?
What's the easiest way to use one bluetooth device with both Mac and iPhone? (Not a the same time.) I have it working with a voip phone on my mac (x-lite), or with the Bria voip app and the ATT line on my iphone. What I want is step by step how to accomplish the transition with the fewest clicks. I understand that I can't use it with both the Mac and the iPhone at the same time, and that's acceptable.
But it's tedious, and I would like to switch it back and forth several times a day.You might be thinking of Crossover. Not sure if Windows Media Player works under it, but their website has info on requested and working apps.
Best of luck. -
Just setting up iCloud on my iMac 10.9.2, my problem is when trying to sign out/off from iCloud it comes up with a verification code that is being sent to my land line, I'd changed the numbers in my Apple ID and they show as changed but the land line number still shows as number that the verification code is being sent, I prompt "Don't have access to this phone" and that's no help at all. The only way I can sign out /off from iCloud is to uncheck everything that I wanted to keep in the cloud????
Thanks in advance for any help.Skip the iCloud sign in for now.
Once you reach the home page, go to settings and sign out of FaceTime and Messages. This should also sign you out of iCloud.
Go to iCloud in settings and sign in with the correct Apple ID.
If that does not work
Skip the iCloud sign in
Go to Apple ID.apple.com and sign in
Change your Apple ID to the old one
Delete iCloud account on your device with the old Apple ID and the same password.
Go back to the website, change your Apple ID back to the current one. You will receive an email to verify the account. Verify first.
Sign into iCloud on your device with the correct Apple ID and password -
I'm having problems with random contacts disappearing from icloud. I have a saved text from a contact that displays her info but when I look for her in contacts it's missing.
It is locked to your sisters carrier.
She would have to ask her carrier if they unlock iPhones and if she qualifies for this service. -
i have problem with my iphone4s in the icloud ; when i wont too make a ID apple free dis messege apear: Accont Limit Reached This device is no longer eligible for creating a free icloud acoont.What i cant 2 doo???.
were i have too pay for additional storage?
-
I can't access my cell to verify a code for iCloud keychain?.... What do I do to get keychain going!!!!!
Hi freddyg5316,
Sorry to hear you are having issues with this. If you are having troubles receiving the verification code via SMS when setting up iCloud Keychain, you may find the information and steps outlined in the following article helpful, in particular this portion:
If you didn't receive the verification code via SMS
Make sure that you have a strong cellular network connection on your phone.
Make sure that your phone number can get SMS messages. To check, ask someone to send you a text message.
Make sure that the correct phone number is associated with your account:
On your iPhone, iPad, or iPod touch, tap Settings > iCloud > Keychain > Advanced. (In iOS 7, tap Settings > iCloud > Account > Keychain.) Make sure the phone number under Verification Number is correct. If not, enter another phone number.
On your Mac, choose Apple menu > System Preferences. Click iCloud, then click Options next to Keychain. (In OS X Mavericks or earlier, click iCloud, then click Account Details.) Make sure the phone number under Verification number is correct. If not, enter another phone number.
If you can't access a device that has iCloud Keychain enabled, contact Apple Support and verify your identity to get help setting up iCloud Keychain.
Get help using iCloud Keychain - Apple Support
Regards,
- Brenden
Maybe you are looking for
-
Hey does anybody know how to set up 2 apple ID on mac imessages? Because i have 2 different iphones and i would like to send imessages fron both accounts on my mac...
-
I can't get emails on my iPad it doesn't recognize aapt.net.au
-
How can i add the songs in ringtone
How can i add the my fav songs in rintone gallery top play a custom wise songs on contact numbers
-
Over the last few days I've been trying to work on images I've scanned, the images belong to me, and I often get a 'programme error cannot save' then file name. All the files are below 50Mb, coming from an Epson V500 scanner. I'm trying to save as jp
-
For reasons unknown, when I sync my ATV all goes well except my movies won't sync. If I use the tick box for selected movies, then tick the ones I want and choose "APPLY" all I get is a quick sync and no movies transfered. If I use the tick box for "