Problems with extra Profict Center ECC 6.0?

Dear Gurus,
My client has 4 Business areas in 4.7. Upgradation is going on now to ECC 6.0. Now, the issue is with one Business Area in which there are two division. Client wants to create 5 profit centers in ECC 6.0 by dividing one Business Area in 4.7 into two. What could be the problems if we do this? Or is there any other way to find out the profitability of the two divisions which are there now in one Business Area.
I will explain the problem again
there are 4 Business areas
In one business area there are two divisions
Client wants to know the profitability of these two divisions separately. for this client says he will have separate profit centers for these two division. So, total Profit centers will become 5 in ECC 6.0
My understanding is Problem comes with balance sheet. probably.
Can anybody explain?
Points are guaranteed for useful answer.
Regards

No differentiation in 4.7. It was becoming difficult for the management to know which division is making how much profit/loss. That's why now they want to take care of the problem now in this upgradation. Earlier they were doing some magic in the excel by taking figures from different GLs. Even then they never used to get perfect picture separately for this divisions.
Now, what could be the best solution for them. To have two Profit Centers? In this case Balance sheet will have problem i think. Because, they buy Raw Material centrally. It becomes difficult to bifurcate the expenses.
Is there any other way out to solve this problem. Can we have one profit center and two plants and have some sort of Report where in we can have the profitabilty for each division. Is this possible?
Regards

Similar Messages

Premiere Elements cause problems with Windows Media Center while streaming to TV.

I was having the following problem:
The audio from the streaming process of a recorded TV show on my HP computer to the remote receivers, a Sony Blu-ray player and/or a Sony Streaming Player, results in the loss of audio signal at exactly 30 seconds from the beginning on either devices. The video continues on as normal.
A user on the Windows 7 forum had the following possible cause and solution. His response was as follows:
I "solved" my issue, at least partially. Turns out for me a codec installed by Adobe Premiere Elements for audio (Main Concept) was causing mfpmp.exe to fail (you should see it getting an appcrash in the event log two or three times as soon as you start playing the media remotely.) This program is used by microsoft for DRM. I went through and one by one remained the various attached (non-microsoft) modules until i found the one that caused the appcrash. I haven't fully figured out if Elements is now negatively effected, but that's for a different forum.
I tried the quick fix by un-installing Adobe Premiere Elements. The uninstall solved my problem with Windows Media Center, but I want to re-install the software but I do not want to recreate the problem with Windows Media Center.
Is there another solution for this problem?

I reinstalled Adobe Premiere Elements 10 and the above mention problem reoccured. With a little detective work I was able to determine that the file causing my problem was "mc_dec_dd_ds.ax". I am not sure what this does to Adobe Premiere Elements 10 since I removed (renamed) the offending file. A strange side affect, renaming the file did cause an increase volume. Strange.

Problem with Prometric exam center

Hi,
I would like to find out where can I get help if I face problem with Prometric exam.
I had registered with Prometric for exam 70-647 on 16-Sep at 10:00AM.
On 16-Sep, I reach the exam venue and was inform that the exam venue was close.
I had wasted 7 hours on that day (2 hours travel from my home to exam venue, waited at exam venue for 3 hours and take another 2 hours to return home) and didn't manage to sit for exam. I keep calling exam venue phone number on that day and no one is answering
the call.
Upon return home, I submit a complaint to Prometric using the form on their website.
Prometric only reply me with an email 2 days later asking me to call their candidate care number.
I call Prometric candidate care and spend 10 minutes to explain to them my problem as if they never receive my complaint. Prometric told me their system show that the exam venue is not close on that day and I have to call the exam venue to re-schedule the exam.
I then call the exam venue and was inform that I need to call Prometric to re-schedule the exam for me. They say their system does not show that I had register for the exam on 16-Sep. I had explain to exam venue that it was Prometric who ask me to call them
to re-register. They told me they will call Prometric on this issue and get back to me.
After one day without return call from either exam venue or Prometric, I decided to call Prometric again. I then have to spend time to explain to them the problem that I face from beginning (I can't understand why a large organisation like Prometric don't keep
a log of customer feedback/complaint and expect customer keep explaining to them whenever customer call back). Prometric then told me they never receive any update from exam venue that they were close on 16-Sep and expect me to keep calling exam venue to get
them update Prometric that they were close on that day. The guy from Prometric candidate care refuse to take ownership of this problem to call the exam venue to find out whether it was close on exam date.
I then call the exam venue again and was inform that Prometric's number is busy whenever they trying to call them. They told me they can't help me to re-register for exam, only Prometric can help me to re-register for exam.
It seems like none of Prometric Candidate care or exam venue want to take ownership of this problem.
Please advice who can assist me with this issue?

SUB: Asking for Help (Exam has not been conduct at Prometric Center at Below address)
Test Site Code:     IIJ6K
Test Site Address:     Off NH-8
Ajwa Waghodia Crossing
Vadodara, GJ 390019 India
Test Site Phone:     912652454057
Myself Snehalkumar, 30 Jan 2014, I scheduled to have an exam on 23 March April2014. I went 1 Hour Before at Site Location Which Is above.
At Site location, No one is there except security. I called on above site location number no one picked up the phone. I got the number from security 919879261687 that person (Sajesh Thomas) was managed/arranged at there. I talked with him and he replied me
that there is no more Prometric center here its only for L&T employees.
He gave me another number 09313978791 and said that talked to him, he is regional head of Promatric I think his name is Utkarsh Pande.
I cleared state him what i can do now? I came faraway (90kms) from here for attending an exam. He asked me what exam it is? I said 74-409. He said that its free exam so reschedule it. What about my time and petrol to come from 90 km?
I was very frustrated to listen this kind of answer. I am very disappointed and I said that i will complaint to Microsoft and Promatric center. He answered that go for the complaint. Just because he is regional Manger so he is careless to manage/arrange
and give me pathetic answer.
And give me another number and that was call center number 01244517160. He said that called tomorrow at call center. This is just one center of Promatric center that comes under him . How about other center? Same thing happen at other center which comes under
him.
And L&T person (At site location) said that talked to regional head of Promatric Center. If regional head give me this kind of answer, Where should i go. I was waiting for long time and think what to do next? At some stage i was very depress.
I wasted time and money and went back to home 90kms without appearing an exam just because some irresponsible person forgot to arranged an Exam.
If there is no more Promatric center at this site than Why they did not contact to let me know that there is no longer Promatric center? even day before, if they send me a mail or make a call its ok for me. but that did not happen.
Why on Promatric schedule list to see this site location if no more Promatric center. If its for L&T employees only than please specified that for only L&T employees or remove it from the schedule list so no one will have problem like i had.
I logged into Promatric Center website. I click on rescheduling an exam but that filed was empty so no way to reschedule it.
Now you tell me what should i do after facing this problem?

I have a problem with my Notification Center!

I have a problem with my iPhone 4 and i want to see if anyone else has it...You see I recently updated my iPhone 4 to iOS 5.0.1 and my notification center stopped working!Well it works only in landscape mode.Before that itused to work perfectly-I was swiping it down with no problem!
Can anyone give me a solution?

Try reset iPad and try again.
Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
Note: Data will not be affected.

Having problem with extra space below footer (sticky footer already checked)

Hi there, im having this problem after updated my adobe muse cc. For some reason there is extra space below the footer.
It looks fine when i try to view them offline, but when I upload them, the extra space appears. Here's the url for both of the website with extra space below
1. http://unionvisual.web.id/home-page.html
2. PT-Smas

Hi there
Thx for your reply, is here i upload my screenshot
and here

Strange Problem With Extra Spaces

Hello,
My development staff is experiencing a very strange problem with our JSP pages which display the values from a JDBC result set. We have two environments here: development and production. We have been creating pages in development which work out fine in our development environment. But when we move the page into production, each value which results from the ResultSet getString() method is having multiple blank spaces appended to the end of the value. So, for example, a 5 digit zip code field is really showing up with a length of 8 or 9 because there are extra spaces added to the end of the value.
We are able to work around this problem by using the trim() method, but this is getting quite tedious to do to every single page in the site. It is very annoying because the problem does not exist in the development environment.
So you figure there must be a difference in our development and production environments. But there really isn't. Here is the details for both environments:
OS: Windows NT 4.0
Web Server: Apache with Tomcat setup as a plugin
Database: Sybase ASA 6.0.3
JDK: 1.3
Apache and Tomcat were installed from the same download on both servers. Sybase was installed from the same CD on both servers - and the JDBC Driver (SybDriver) was copied from one server to the next.
Sorry for the long explanation - but does anyone have any idea what could be occurring? Why are the extra spaces being appended to the production pages and not the development pages?
As always, thanks in advance for any suggestions!
-- Chris

Hello Paul,
Thank you for taking the time to analyze this case.
The data in the system comes from two different sources. The first source is a nightly feed from a legacy system. The second source is user input via the JSP application. The records that were inserted from the nightly feed have an accurate length() value (meaning there is no untrimmed spaces trailing along.) But the values coming in from the application have extra spaces appended to them. In the development environment, however, both sources provide properly trimmed data.
If I enter an 8 character last name into the web form in the production app, the value which ends up in the database upon submission will have 2 to 3 extra spaces. I know that this sounds strange - and believe me, it is boggling everyone here. I suspect this problem has to do with the Tomcat installation - even though it was installed identically in each server.
I think we are just going to have live with using the trim() for every database submission. As always, thank you for the help, and all ideas are always welcome.
-- Chris

Having a problem with HP Solution Center seeing my hp6940 printer

So here's the environment, windows XP, ip address 192.168.50.2, hp 6940 at 10.9.26.100. These two networks are connected by a router. I can ping the printer, I can browse to the printer address and see the printer web pages. If I bring up HP Solution Center, version 60.0.114.000, it reports when accessing the status "hp deskjet Disconnected!" and if I check ink levels the HP 6940 Toolbox reports "The computer is unable to establish two-way communication with the device" Windows XP can print to the printer. What mechanisms are being used by the Solution Center to try to communicate with the printer?

Hello w74me ,
Welcome to the HP Forums.
I see that you are having an issue with the Solution Center.
Try running the HP Print and Scan Doctor.
If the Doctor fails, please let me know where it failed and error codes you may see.
Cheers,
Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
W a t e r b o y 71
I work on behalf of HP

Problem with UE ZXKKEU11 in ECC 6.0

Hi Guys,
I have a problem with UE ZXKKEU11.
When it was called from VA01 during material insert, the structure i_copa_item is empty and I don't know why.
Have you got any suggestion???
Thank you in advance for any useful answer
If you could I need help urgently. thanks.
Edited by: Salvatore Bruno on Jan 15, 2009 6:59 PM

Hi Salvatore,
Could you help me? I face the same problem you posted some moths ago. In your last message of the thread you said, "The problem was in KEDR configuration".
What was wrong in your configuration?
Thanks in advance 4 ur answer.
llr

Having problem with extra DDR2 for P45 Neo2

Having problem with adding more DDR2 to my P45 Neo2. I currently have 2x hyperx 2gb ram installed, but I would like to take it up to 8gb. I had purchased another set, installed and pc wouldn't load. I installed these into another pc and they worked fine. What am I missing? I have tried googling but cannot find the solution to my question.According to MSI it will take DDR2 800/1066/1200. It does not mention what module name it takes eg pc 5300, which I'm quite sure are the ones installed. I have just updated the bios to the most recent should this help?

Guessing you have all RAM related settings as "auto"?
Does the PC work with your new set only?
You may need to set the RAM timings&voltage manually in BIOS to common factors
that are valid for both your new and old RAM kits.
These settings you will do with your old kit in place, save in BIOS, exit and power down.
Insert the new kit in addition, see if it POSTS. May take a few tests to succeed.
CPU-Z program can help to figure some of the parameters.

Problems with Elisa Media Center (images quality)

Hi
I decided to install Elisa Media Center on my laptop. Everything works just fine, but only images from photo gallery are very ugly (I mean ragged). Don't know why, but when I play slideshow all of my photos, all of them are really bad looking. Just look.
This is screenshot from Elisa:
And that's how this image looks in original format (quality):

I reinstalled Adobe Premiere Elements 10 and the above mention problem reoccured. With a little detective work I was able to determine that the file causing my problem was "mc_dec_dd_ds.ax". I am not sure what this does to Adobe Premiere Elements 10 since I removed (renamed) the offending file. A strange side affect, renaming the file did cause an increase volume. Strange.

Problem with field symbols in ecc 6.0

i have the following code written in 4.6 version   now i am executing the old report   in 6.0 but i am facing with some unicode error.
FIELD-SYMBOLS:
    <line_of_bs_table> LIKE tbl1024,
   READ TABLE bs_table INDEX row_bst ASSIGNING <line_of_bs_table> .
    buffer_bsbuffer_ptr(aux) = <line_of_bs_table> >col_bst.
tb1024 is standard sap structure for storing buffer contents
i have the following error in ecc 6.0
structure type   '<line_of_bs_table> >+col_bst' does not start with a charecter type field in unicode programs in such cases
offset/ length declarations are not allowed.
can any one tell how can a field symbol structure is changed to charecter type.

Hi elinuk,
you have already posted this thread in the ABAP general forum under problem in field symbols in ecc6.0 and I think that this forum is more related to this issue than the DMS forum. So please close this thread and investigate this issue further in the ABAP general forum.
Best regards,
Christoph

Many problems with MSI Control Center

have a lot MSI mobo
I still P45 & P45 Diamond Memory lover.
the problem of their old dual core center was that sometimes bug "debug assertion failed" came ..
but now I have 5 mobo 1155:
msi Z77
msi b75
msi z68
msi H67
msi h61
in all of these motherboards, the start of the OS, the latest version of control center never keeps the settings that I have saved as a "default"!
for example, the Z77 does not maintain the memory for the fan cpu, while fan1 & fan2 are active, but not to the minimum value that I had memorized ..
the z68 instead only stores the value of the cpu fan
the H67 does not store anything ..
and also the other way!
indicted versions of MSI CC are those where the adjustment of the fans is not only numeric, but also with the graph ..
I seem to recall that older versions of CC II without the graphics did not have so many problems in the management of the fans (but I'm not sure about this)
I do not know if I'm wrong something in the settings of the BIOS, or the software itself!
and I wonder if the ControlCenter has a bug so big, that users do not make a mass protest to the manufacturer directly!
I hope you can help me positively.
I am very disappointed with this software MSI, I would be a little desire to leave my beloved brand ...
thanks
max
p.s. I can understand for the "old" h61/h61, but it is absurd that the Z77 motherboards & b75 does not have control of all the connectors on the PCB Tachometer & PWM ... not to mention the z68 should be the most valuable of all
(as opposed to other manufacturers that optimize much better implementation "fan control")

Quote from: Froggy Gremlin on 05-March-13, 12:39:59
You have been around here long enough to know this is a user to user community and can't do anything about BIOS or S/W problems.
With 16 MSI machines here in the hobby/test room, not one has CC or LU5 on them. For machines I want to control any fans on, I simply install an aftermarket fan controller to do the job. You might try the SpeedFan utility. That seems to be popular.
Talk of jumping brands falls on deaf ears here, and is your choice because of unhappiness with optional S/W.
yes, I have been long enough, but the forums are also used to find solutions ..
maybe some user could answer to me better than you, do not you think?
and this forum is not managed directly by MSI lately?
use a fan controller is not a solution to the problem!
you can not really think that just because you use the external controller.
if MSI creates software with the same problem on all chipsets,
then MSI should fix this software!
otherwise does not produce even, which is less disappointment around.
for my opinion then check the BIOS is much better than using anti-aesthetic Rheobus ..
optional S / W is part of the motherboard itself, while SpeedFan is a third-party utility ... the situation is the same..
I will open a ticket, but it is absurd that MSI does not realize that their own software has this great Bug ..
you say you can not be faulted, and instead I think yes.
especially if you love MSI.
I with 7 Mobo MSI + 6 VGA MSI I can say I devoted customer, and always recommendMSI products to all around..
all software MSI are good, afterburned, video genie, fast boot, and also the ControlCenter II for the management of the cpu and ram is good software!
my anger is that there is only this damn small bug in the software fan control, and I do not understand that the manufacturer and users (inside and outside the forum) do nothing to have a solution!
Quote from: Bernhard on 05-March-13, 14:59:12
Why this sudden realisation that you are missing something on all the MSI boards that you acquired over the years.
Did you ever inform MSI about this at the time that you purchased each and every board ?
the reason is my laziness to contact customer support (and laziness to write here) that I missed until now.
is because with P45 diamond7memory lover Customer Support could not solve the problem.
and because H67 & h61 htpc that are in use a short time
and because z68 erain bench test that used very little time (due to living with my girlfriend) and I have to resell soon.
but now that I have just arrived Z77 & B75 I want to solve this problem.
and if I decided now-finally-maybe I had more important things to do, but now I realized that it is not possible that all boards have bad dialogue with MSI ControlCenter!

Problems with HP Solution Center Display

I am using Windows 7 and IE. I have most recent Flash Player. Solution Center no longer displays. I have tried suggestions on website. Can't find Control Panel for Flash Player. Does anyone have a resolution for the display problem? Also Weather Channel no longer displays.

Hello there! Welcome to the forums @dstef1605 ,
I have some suggestions in mind for the issue you're having with installing your printer on Windows 7. However, I would first need to know which printer you have.
Please let me know the printer model and we will troubleshoot from there!
Also, if you have an all in one, make sure you can make copies from the printer and include the results in your reply.
How Do I Find My Model Number?
Happy Monday!
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

Problem with Lenovo Solution Center for Windows 8.1

Hi,
I reinstalled my Laptop. I wanted to install the Lenovo Solution Center for Windows 8.1 (64 bit).
(I installed it with the necessary administrator priviledges.)
But it didn't work.
I am getting the following error message.
Can anyone help me with this problem. Thanks in advance.
Best regards,
Jens.

This one?
http://support.lenovo.com/en_US/downloads/detail.page?LegacyDocID=MIGR-73784
Cheers.
If I helped you, please give me some kudos! ^^

P6N SLI V2 problem with "dual core center"

I have the P6N SLI V2 with E4400 and 7600gt running XP pro sp 2.
after installing and running MSI's "dual core center" (including .Net framework) I only have the "VGA" option enabled, the "MB" option is disabled as well as the D.O.T option. I tried uninstalling and reinstalling as well as downloading the latest version, but I have the same problem. I get no MB options at all (like no cpu temp, fan speed, core speed etc.). I didn't make any changes to the BIOS yet (other than changing the boot sequence), and ideas?

Quote from: nautica on 15-July-07, 13:19:02
and ideas?
A great one.
Don't use MSI's utilities. Anyone here will tell you that.

Problems with extra Profict Center ECC 6.0?

Similar Messages

Maybe you are looking for