Problems with Extractor

Hi ,
When iam extraction from CRM system to BW system iam facing problems .
Iam checked in source system (CRM ) in RSA3 there records are showing corrects values for two filelds but in BW side it's showing in 0 values .
we checked all the stuff like data source activation and extractor check , trasfer ruls activation etc .
can any body help in this regard.
Thanks .
Anil

Hi,
If its an InfoObject, right-click on the infoobject and select 'Activate Master Data'?
Thanks.

Similar Messages

CO-PA, problem with extractors. (Account Based)

Hi everybody,
I have a problem when I want to execute RSA3, on the extractors that automatically generate the systems. I followed all the step that the document say, I belive.
1.- <KEB0>, I still use mandatory fields PERIO and KOKRS.
2.- <KEDV>. I put on the all fields a * , with exceptions KOKRS. (on it put the variable Controlling Area).
3.- <KEDU> Summarization levels.
3.1- Delete an regenerate
3.2- Refresh. (In this point I show that the systema take very short time, and when check with transactions KEDV, I can see that the refresh records are cero (0).
4.- Modify on SE11, the tables COEP and COEJ the index 4.
5.- <RSA3>, finally with the parameters, as example :
KOKRS: CO01
PERIO: 2006004,
The systems show a error.
I cant execute the extractors.
So , I know that is a problem with R3, but I don't use it if I dont want to use BW.
Some one knows the problems or the other steps that I forget to execute?
I appreciate your help,
regards,

HI,
To understand, why system behaving like this, you can analyze derivations in KEPM (Extras-> Analyze derivations). Try to enter manually using parameter set and then do Extras->Analyze derivation.
You could also try chaing the Target fied attributes to 'Overwrite with new value only if new value found' from 'Do no overwrite' in KEDR for your Table look up step.
Hope this helps.

Problem with extractors after system copy

Hi Gurus!
After system copy I have problem with export data source from infocubes. Logical system name was converted with BDLS. When I check any export datasource (8*) with transaction RSA3 system tell me that no data records was found though data in fact table every infocube exist (in SE11). What can I do to solve this problem?
Thanx.

Hi,
Of course I tried reactivate myself source system but problem is still here. When I check extractor (with RSA3) of any data source of any infoobject (master data) - everything is OK. When I check extractor for export data sorce - I have problem.
to Mickael: In modeling every thing is OK.
Thank you for all answers.....

Problem with extractor 1_co_pa

Hello experts
I have a copa extractor 1_co_pa_dge1 which is not extracting perticular range of Cost Elements in range 45000 to 45999.
Do we need to configure anything for this extractor in ECC to include all cost elements we need?
Whats configuration needed to be done for this extractor?
Regards
Sudeep

Hi Sudeep,
What the COPA extractor extracts would depend on the CO-PA functionality set in ECC..how the Operating concern is designed by the funtiional folks.....and the COPA datasource created from transaction KEB0.
We would only be able to extract data which exists in the table CE1**** (* is your operating concern). This is the actual line items table. CE2**** has plan data. Check if the data you are looking for exists in the tables, if not it is not our issue.

Problems with 2LIS_02_sCL

Hi,
I am facing more or less the similar problem.
I am using 2LIS_02_SCL to pull purchasing data from R3.
and using 3 process keys for Po, GR,Invoice for this extractor.
the extract structure is enhanced to add the delivery indicator and is populated by the code by looking up at the EKPO table irrespective of the process key.
Which means that ideally if indicator was set for Po,item for process key 1 then the indicator should be set for process keys 2 and 3 as well. But I have identified some records where DELEIVERY COMPLETED INDICATOR was set for process key 1 but not for 2 and 3.
Can any one help me on this.
Regards
Sudheer

Hi Andrea,
As far as I know there are some problems with extractor 2lis_02_scl. In my previous client we had problems with the "delivery completed" flag, that was not always correctly updated.
What we finally got from SAP is that we should update R/3 Plug-in to latest version, cause there that extractor behaved better (it was version 3.1).
Maybe you have to open a customer message to SAP...
Regards,
David.

Problem with COPA extractor 1_CO_PA ...

Hi all,
I am facing a problem with COPA extractor where delta is bringing in records which have been commited to database more that 6 hours ago. I understand that according to a note that COPA extractors have a default safety interval of 30 minutes but 6 hours is too much.
Is there any way I can change that? Is there any customizing option? Note 392876 explans how to change the safety interval to 5 minutes but I dont know if it is applicable for our patch level?
We are at PI->2004_1_500 patch SAPKIPZI69.
Also the safety limit is also maintained in ROOSOURCE-DELTASAFE2 field, should I just change it there?
any help is appreciated...
thanks

I see that you are not so novice!
Please, how can I check the time and time zone in R/3 and BW?
Thank you in advance

A problem with 1CL_OLIS002 and 1CL_OMAT001 extractors - delta extraction

Hi
I have a problem with 1CL_OLIS002 and 1CL_OMAT001 extractors - delta extraction.
Interrelated extractors: 2LIS_11_VAITM and ZMATBATCH_Attr work well.
For 1CL's extractors I see current data in RSA3 but I don't see LUWs in RSA7.
Extractors send 0 records to BW.
There is no entry in "BIREQU* " job logs like this:
"Call customer enhancement BW_BTE_CALL_BW204010_E (BTE) with xxx records".
which I find in job logs when all worked well.
We had some problems with R3. I had to restart job "LIS-BW-VB-APPLICATION_13*".
May be it has influence on these extractors?
Any suggestions about how to resolve the problem?
Regards
PWnuk

Hi
Can you please share the solution of this problem with me,I am also facing same issue of Delta not working but full load is working in 1CL_OBI_001?
Edited by: Aseem84 on Jan 12, 2011 10:23 AM

Function module based generic extractor - Problem with the selection

Hi all
The following is my code in the function module. I am able to get the entire data if i dont give any selections and the number of records is also correct. But when i select a MATNR value, it returns 0 records where as it needs to return 3 records. If i give selection based on bukrs, werks, lgort its working fine. But if i give selection based on MATNR, then it is not working.... I think there is a problem in the bold part of my code. If i debug, LS_MATNR is having the correct value which indicates that there is no problem with the value being passed to LS_MATNR from my selection screen of my datasource in RSA3. Even GT_WERKS is also having data. Please help.
OPEN CURSOR WITH HOLD S_CURSOR FOR
SELECT MARA~MANDT
        MARA~MATNR
        MARC~WERKS
        MARD~LGORT
        MARA~MEINS
        MARD~LABST
        MARD~EINME
        MARD~SPEME
        MARD~RETME
        MARD~INSME
        MARD~UMLME
        MARD~VMLAB
        MARD~VMEIN
        MARD~VMSPE
        MARD~VMRET
        MARD~VMINS
        MARD~VMUML
        MARC~XCHPF
        MARD~KLABS
        MARD~KEINM
        MARD~KSPEM
        MARD~KINSM
from MARA inner join MARC on
MARAMANDT = MARCMANDT AND
MARAMATNR = MARCMATNR
inner join MARD on
MARAMANDT = MARDMANDT AND
MARAMATNR = MARDMATNR
AND MARCWERKS = MARDWERKS
for all entries in gt_werks
where MARC~werks EQ gt_werks-werks
AND MARA~MATNR in LS_MATNR.
    ENDIF.                             "First data package ?
Fetch records into interface table.
named E_T_'Name of extract structure'.
    FETCH NEXT CURSOR S_CURSOR
               APPENDING CORRESPONDING FIELDS
               OF TABLE E_T_DATA
               PACKAGE SIZE S_S_IF-MAXSIZE.

try this
select marc~matnr MARC~WERKS into t_marc for all entries in gt_werks
where werks EQ gt_werks-werks and lvorm = space.
if t_marc is not initial.
select MARD~LGORT MARD~WERKS MARA~MEINS MARD~LABST MARD~EINME
MARD~SPEME MARD~RETME MARD~INSME MARD~UMLME
MARD~VMLAB MARD~VMEIN MARD~VMSPE MARD~VMRET
MARD~VMINS MARD~VMUML MARC~XCHPF MARD~KLABS
MARD~KEINM MARD~KSPEM MARD~KINSM MARA~MEINS from
mard inner join MARA on mard~matnr = mara~matnr
for all entries in t_marc where mard~matnr = t_marc-matnr and mard-werks = t_marc-matnr
and mard~lvorm = space.

Problem with Overwrite for Key Figures in ODS

A bit of a long explanation, but the problem is not so complicated...
We have an ODS containing contract line items. Each line item has a key figure "Total Contract Target" that is marked with update type "overwrite". We have modified the extractor that delivers data for this ODS so that the key figure is set to a value from the contract header. Since we don't want the key figure to be duplicated if there are multiple line items on the contract, the user exit for the extractor modifies only the first line item delivered.
For example, overall contract target value = 100. Contract has 3 line items. Contract target value for line item 1 is 100. Target value for line item 2 and 3 is 0.
This all works fine for initial loads, but there is a problem with the business content extractor for deltas. Whenever a single change is made, it delivers three sets of records. Continuing the example, we would receive 9 records for the contract (3 sets of 3 line items). Each of the three sets contains the same records. Only the first set has the correct contract target value. Since the ODS key figure is set to overwrite, our method of setting the total contract value in the first record doesn't work, because the extractor delivers duplicates so the duplicates overwrite the total with a 0.
Would setting the key figure for total contract value to update type "additive" solve this? (I'm concerned that additions would be made if there were only a change to characteristics and not the key figure). Thanks for your assistance.

Since we ought to post solutions to problems we discover for people who search this forum...
Solved this by modifying the customer exit for the extractor to set the key figure for the first contract line item encountered AND for all subsequent records with the same contract number / contract line item. Since the key figure in the ODS is set to overwrite, this makes sure that the last record written doesn't overwrite the key figure with 0.

Extracting Open Items : Problem with mass activity FPBW

Hi everybody,
I need to extract Open Items in BW. I use the extractor 0FC_OP_01 which extract the content of table DFKKOPBW in OLTP. Open Items are written in table DFKKOPBW by the mass activity FPBW.
I have a problem with this mass activity : the field "Business partner number" stay empty in table DFKKOPBW after the execution of FPBW, whereas it's not empty in table DFKKOP... (and for the cleared items it works...)
Does anybody have a solution for my problem?
Best regards
Aube

hi buddy,
go to SBIW go to the setting for application specificdatasourse in that go to contact account recivable, click the fileds for extrction add the field the data to see in to dffkopbw table after mass activity
regards
nag

Performance problems with 0EC_PCA_3 datasource

Hi experts,
We have recently upgraded the Business Content in our BW system, as well as the plug-in on R/3 side. Now we have BC3.3 and PI2004.1. Given the opportunity, we decided to apply the new 0EC_PCA_3 and 0EC_PCA_4 datasources that provide more detailed data from table GLPCA.
The new datasources have been activated and transported to the QA system, where we experience serious performance problems while extracting data from R/3. All other data extractions work as before so there should not be any problem with the hardware.
Do you use 0EC_PCA_3? Have you experienced any problem with the speed of data extraction/transfer? We already have applied the changes suggested in note 597909 (Performance of FI-SL line item extractors: Creating indexes) and created secondary indexes on GLPCA table but it did not help.
thanks and regards,
Csaba

Seems the problem was caused by a custom development - quantity conversion in user exit. However, we tried loading earlier after removal of the exit, it did not help then (loading took even longer...). Now it did.

Problems with a table in PDF`S footer

Dear sirs,
We are having problems when trying to run a PDF with Adobe LiveCycle Designer tool.
We are working with a PDF which is composed of a header, the main body and a footer. We have created a table (table1) at the footer and
another one at the main body (table2). This last table (table2) may overflow therefore it will genarate two pages for our PDF.
On both pages appear the header and the footer correctly but in the last page it does not write the data from the table included in the footer (table1).
We have no problems with the table included in the main body
In the attachments, I send you the screenshots of both pages in which I have marked in red the part where we have error.
May you help us to solve our problem?
Thanks in advance your help.
Edited by: emgaitan on Mar 16, 2010 2:18 PM

Wardell,
Check the data in RSA3 for the extractor that you use to bring data .
You must be using the data source 0CO_OM_CCA_09. Check the data and reconcile and you will get it.
Let me know if you need anything else.
Thanks
Ravi Thothadri
[email protected]

Problem with subsequent deltas after converting Full requests to Repair.

Hi All,
We are working on changing an existing system from loading from multiple extractors directly to a cube to loading each extractor to its own DSO and then combining the data in a 'consolidated' DSO and then on the the cube.
To avoid downtime in the production system when we do the cut-over we have decided to do full loads of historical data up to Sept 2007 and then do delta loading from then on.
So the steps so far have been:
1) Full load of data to low-level DSO's. to 09 2007.
2) Full load of data to 'consolidated' DSO.
3) Convert Full requests in consolidated DSO to Repair Full Requests (see SAP Note 689964).
4) Initialise Without Data Transfer to the 'consolidated' DSO.
5) Delta Initialise from 10 2007 from the source system to the low-level DSO's.
6) Delta from low-level DSO to consolidated DSO.
My problem is with step 6 - no records are loaded into the consolidated DSO after delta load of data to the low-level DSO - the load process runs correctly but tells me that there was no data available.
Can anybody see if there is a problem with my approach - I thought this was the correct way to convert from full loading to delta loading ?
A Merry Christmas and a Happy New Year to you all
Graham

Hi Siva,
Thanks for the reply.
I understand that there is only an active table with a write-optimised DSO - but delta processing should still be possible at the request level
(SAP Help on Write-Optimized DataStore Objects http://help.sap.com/saphelp_nw2004s/helpdata/en/b6/de1c42128a5733e10000000a155106/frameset.htm)
Since write-optimized DataStore objects do not have a change log, the system does not create delta (in the sense of a before image and an after image). When you update data into the connected InfoProviders, the system only updates the requests that have not yet been posted.
In my case the 'new' request loaded into the DSO have not been loaded into the connected InfoProvider, so it should be processed.
Regards
Graham

Problem with initialization Delta queue

Hi Gurus,
I have problem with initialization of delta queue when I try load transaction data from R3 (FM) to BI.
Error message: Deviation of (64 seconds) between qRFC counter (000012365466830000080000) and actual time (08.03.2009 21:10:19).
I have no idea where is the problem because this problem occurs only in PRD systems. In DEV and QUA system everything is OK.
System BI: BI 7.0
Source system: ECC 6.0
Thank you for all answers!
mp

Hi,
Replicate the DS in BW Prod and then Activate Transfer rules and then try.
First you delete the DElta quae in RSA7 for the particular datasource in the R/3
source system then you try to intialize, here you are trying to intialize datasource with
same selection conditons . thats why it is giving shortdump
Check
Business Content and Extractors
Thanks
Reddy

Problem with Real Time Data Acquisition

Hello,
I tried to built a RDA data flow according to the SAP-Help and this blog (/people/kamaljeet.kharbanda/blog/2006/11/13/real-time-data-acquisition-bi2004s), but I ran into a problem. Everything seems to be fine, but even though the daemon is running no new data is added to the DSO. I'll explain in detail what steps I took and hope someone can pinpoint my error(s).
System is BW4 on SPS 17. My datasource as well as my DSObject are in the same system
1.) Created a transparent table with a timestamp-field for generic delta as a local object.
2.) Created a generic datasource from view/table (used the above table), marked it as realtime-enabled and used timestamp as delta-specific field.
3.) Replicated the metadata for my datasource and activated it.
4.) Created a Data Storage Object with infoobjects corresponding to the table fields
5.) Created a transformation between DataSource and DSO
6.) Created a DTP from Data Source to DSO. The type is realtime-DTP.
7.) Created an InfoPackage for Delta-Initial Load. Update mode: Initialize Delta Process -> Initialization with Data Transfer.
8.) Then I changed my DTP (step 6) to "normal DTP" and executed it. Then activated the data in the DSO. The datasets from the table (which i filled with an ABAP-program) were successfully loaded and activated. So now my DSO contains 5 datasets.
9.) Changed the DTP back to "realtime DTP"
10.) Created an InfoPackage for RDA. Adapter is set to "Realtime extraction from SAP System"
11.) Created a daemon, assigned the IP for RDA and the DTP to the daemon and started it up.
12.) Executed my ABAP program to added 3 datasets to the table which is used as a datasource.
So now in my source table there are 8 datasets, but the daemon won't load them. In my RDA-Monitor (trx rsrda) it shows my daemon, the assigned IP and the assigned DTP (status green). Under the IP there's one yellow request (that should be right according to the help), but unlike the picture in the blog (link see above) there's no request under the DTP.
Job overview (sm37) shows an active batch job and some jobs that are ready (every 10minutes a new batch starts and the old one is closed). the job log shows, that the daemon runs, but loads no data...
i think it might be a problem with the delta extraction somewhere, because the intial load works fine and there are no errors anywhere.
Edit: perhaps my settings in the data source unter tab: extraction are wrong?
Delta process: AIE After Images By Extractor (can't change that)
Direct Access: Allowd
real Time: Real-Time DA Supported
Adapter: realtime data extraction (also tried Access to SAP Data through Service API which seems senseless)
Data Format: Fixed Lenght
Anyone can explain what those fileds mean and which one i should use?
Edited by: Christoph Jender on Apr 10, 2008 2:48 PM
Edited by: Christoph Jender on Apr 10, 2008 3:33 PM

Hi again, another thing i'd like to try is to just active a business content datasource which is realtime-enabled and has the ability to dynamically add some values so that i can test if it works. but i have no idea what business content would be applicable here, any ideas on that perhaps?

Problems with Extractor

Similar Messages

Maybe you are looking for