Problems with fade outs - audio

Hi
I have a problem that's driving me crazy. Whenever I add a fade out transition at the end of a clip, a random piece of audio from earlier in the clip appears at full volume alongside the fade. Is this a bug and does anyone know a way round it? iMovie 5 never used to do this.
Any help greatly appreciated.
Thanks
Ian

I had a similar issue just on the weekend. But, it wan't just the "fade out transition". Other transitions were affected by this same "bug".
I decided to fade out the audio first before applying the "fade out transition". This is not the solution which I wanted personally, but it did the trick. No random piece of audio.
I do agree that a real solution to the issue would be excellent! Hopefully, tech support at Apple will have something for afrocelt1121.
Good Luck!
Rodger

Similar Messages

Problem with 'Fade Out'

As part of an edit, I am trying to both 'Fade In' and 'Fade Out' of a particular video. The 'Fade In' works fine, but I'm having problems with the 'Fade Out'. For some strange reason, while the video part of it fades out properly, the audio that also fades out is not the correct audio - it is audio from earlier in the video (I'm assuming that - it is a live music video - the part that is fading out is crowd response, but the audio somehow has music in it)
This is my first time using iMovie '08 - I have used past versions of iMovie over the last few years and have NEVER had this problem. Any suggestions or known fixes? Any feedback much appreciated.

still confused. I don't get a yellow band when I select a clip - it just kinda gets highlighted.
Also - when I go to audio FX in the editing field, it really has nothing to do with selecting audio - just a bunch of equalizer options. Not really sure why a basic fade out wouldn't control both the video as well as audio of the clip. It always did in previous versions of iMovie.

Problems with fade out

i'm trying to do a fade out at the end of rather long audio file, about 20 minutes, and the fade out function will not work. it works at the beginning of the track, i can click, create the little ball-points and drag them up and down as i please, but at the end, i create a ball point, then go to create another one to bring the fade down, and the first ball i created vanishes. i even tried creating a new music track separate from the one i created for the fade in, and same result. fade out doesn't work after about 3/4 of the way through the track. any suggestions?

The zoom setting deal.. it's the circle button right? With the L and R on it.. I tried moving it to L to zoom out but it doesn't change a thing. I was so proud of myself for finally learning how to fade in and out today.. but now this won't work. It's weird, once it passes like 520 or so, the ball disappears and the fading stops working (past that point).

Problems with line out audio in prefences

I have a weird problem ... at times system prefences will not let me switch back to audio out when I use my headphones. I there something I am missing? Thanks

Petar_MK wrote:
2. When the words of the last line of the page are too loose, I try to
hyphenate the first word of the next page, but it does not work. I must use
(shift) (enter) to the part of the word to cut it and that word to go to
the previous page and then manually add hyphen sign at the end of the line.
The last line of a page gets too loose because you disallowed automatic hyphenation of the last line on a page.
From the online InDesign Help on Hyphenation:
Hyphenate Across Column
To prevent words from being hyphenated across a column, frame, or page, deselect this option.
-- and you must have exactly that in your style(s). Look here:
Message was edited by: [Jongware]

How do I fade out audio in Premiere Elements 13?

HOW DO I FADE OUT AUDIO IN PREMIERE ELEMENTS 13?

ATR
Thanks for answering,
im moving slowely forward in speeding up making presentations by using the new discovered smart tricks or functions.
So you understand my level of expertise:
This step by step production methode im using now give's me controle without the (full) knowledge of all the (smart)functions in this program.and slowely learning the way arround.
starting a project: a mix of photo's and avi's, starting with manual time line filling with the selected files then the timesaving "Standard crosover on all selected".
second: placing a header with the titel at the front and a ending a the end. (cut al the wrong or bad pieces and extend some photo viewingtime if needed.)
And then adding subtitels/tekst and use some other crosovers to highlight the change of subject or stills to movie.
And at last: placing the background music on "soundtrack": after some fiddeling around ive choose to cut the musictrack between the avi's instead of let the music play all the time and adjust the volume down to zero when a avi is playing.
this have two advantages:
1) the songs can be streched by by cut and jumping to the end of the avi soundtrack. (no loss of music through fading out and still let it play so need less musicsongs.)
2) And the rightclick fade function with the standaard fadingtime => "fade out" and "fade in" is easly to use because of the end track avi and begin track music timeline. (And if needed lowering the fading slope/ extend the fading time by moving the "points" on the audio line)
But; its a lot of work and after the first run through the presentation(or watching on TV) and there is a adjustment needed (fadingtime, volume-changes) you have to adjust every bit of the soundtrack. (keeping the volume "feeling" the same is the difficult part.)
I will read about the Smart Mix function and test it on a other project. see of its fits my kind of using and expertise. (every automatic (smart) function needs understanding of its purpes and limitations and there are a lot of them in premiere
What is in your opinion the most effective way of adjusting volume of audio parts across the hole project so its merged in to one audio/soundlevel?
(and offcourse in the hole way of building the presentation.)

Problem with fading out particles in cs5

I have a problem with fading out particles or anything for that matter in my CS5 after effects! I set up the key frames right. O opacity at first and whatever number at next and it fades in fine, But when I try to do the reverse it will not fade out and only stops the effect if I cut its durration at the red par representing it on the top of the time line. This produces and rough aburpt cut of the effect which will not due. Please can anyone tell me what I am doing wrong that I can't fade out particles with opacity?

First question: What OS and what's the build of CS5.5?
Second question: What effect are you using? There are a bunch of ways to generate particles.
Last question: if you turn off the effect can you get the layer to fade out? Pressing Alt/Option + t will set a keyframe for opacity on your layer and reveal the keyframe in the time line. Do that, set the value to 0, then move down the timeline a few frames and set the value to 100. This should generate another keyframe. Now move down a few more frames and press Alt/Option + t or change the value for opacity to anything and then back to 100, or copy the previous keyframe and paste to set a 3rd keyframe. Finally move down a few more frames and set the value to 0. You should have 4 keyframes in your tlimeline for opacity. If you want to clean up the layer press Alt/Option + ] to set the out point for the layer.
Everything should work just fine. Turn on the effect and your layer and the effect should fade out.
If you want to do something else with the particles, like fade out a particle over the lifetime of the particle we'll need to know which plug-in you're using.

How do I increase default time of fade out audio and video

Hi. Still working with elements 8. Today is another day. I notice lately that I right click on the end of my clip and hit the fade out audio and video
tab but it is a bit short and sloppy for me. I want a slightly smoother and longer fade out audio and video. How do i achieve this? The default time on transitions is fine,,,JUST the fade out on the END of clip?
Thanks Howard

Also, if you want to save a customized fade out for future use, you can do that too.
Google Books has Steve Grisetti's Premiere Elements In A Snap book explaining how to do so. (See pages 165 and 166 at the following link)
http://tiny.cc/ijdi8
This is for an earlier version of Premiere Elements but I suspect the steps are nearly identical for PRE8.

Problems with TV Out signal after upgrading to iOS 5.1

Has anyone experienced problems with TV Out signals on their iPad 2 using the Apple HDMI Adapter after upgrading to iOS 5.1? I am trying to connect to my HDTV after upgrading and cintunally receive an "Unsupported Video Signal" message with a blank/back screen. Prior to upgrading, I had no connection problems and could view TV Shows, Movies, Music Videos, Keynote, etc...without problems. I've been unable to find any resolution to this problem, even followed Apple guidance to detach and reattach the HDMI adapter without success. Seems like a software bug to me and it's a major problem when trying to conduct business or personal activities. Hopeing Apple has a fix in work already...anyone else have any ideas? Thx in advance...

Try a reset. Press & hold the Power and Home buttons together for 10+ seconds, ignoring the red power-off slider, until you see the Apple logo. It is safe to do, there should be no content loss. It is the same as rebooting your computer.
If that does not work, restore the iPad to the factory settings.

Problems with filling out PDF forms

We have problems with filling out PDF-forms. Aotomatic filling of forms is deactivated and we use the Adobe Reader 11.0.05. The problem is: After some time the inputs are wrong put down in the form. For example: I write 120 and in the form stands 125. We have already extinguished the cache. Thanks for your help in advance.

You will get that first message when the document has been changed in a way that invalidates the internal digital signature that's applied when a document is Reader-enabled. Certain changes are allowed (e.g., filling fields, commenting, signing) and will not invalidate the signature, but others are not. The exact cause of the change is often hard to track down, but it can be due to font problems, some type of file corruption, or something that Acrobat/Reader attempts to correct when the file is opened/saved. You will also get the message if the users system time is not correct and is currently set to some time before the document was Reader-enabled. It seems best to use the most recent version of Acrobat to enabled the documents and recent versions of Reader to work with them.
It problem is probably not related to the user using anything in the Sign pane.

Has anybody had a problem with greyed out wifi on i phone 4 gs

Has anybody had a problem with greyed out wifi setting on iphone 4gs

Forty four in the last week.
wifi greyed out

How to fade in and fade out audio in the new version of Imovie?

Please help me!
how to fade in and fade out audio in the new version of Imovie?

There is a tiny dot at the beginning and ending of an audio clip that can be moved to adjust fade in and fade out.

My sound is like echo and i can't solve the problem with realtek hd audio manager

HP G72 notebook
Windows 7 64 bit
Sound is like echo and can't solve problem with Realtek HD audio manager

It's a Qosmio X300-16M (windows 7 64bit)
I downloaded the last toshiba's sound driver (for win 7 64bit), but it's as if it doesn't contain MaxxAudio anymore... (but the file maxxaudio.dll is still in realtek directory)
It worked correctly after Windows 7 update, (that's why I tried to reinstall the audio drivers which were in the DVD... but it does not have resolved the problem.)
And all my system restore's points have been lost after a wrong bios update or something else (but this isn't a problem anymore)
Now, my computer works correctly, my only problem is that the MaxxAudio tab (from Waves Audio) in the realtek audio manager disappeared... (It just makes a better sound...)
And I just want to know if it's a curent problem or not... and if someone can fix it

Problem with TV out, only audio, no video

I has just bought a new ipod video 30GB and I also bought a A/V cable
of apple. But when I connect to my television. Only hear audio from
television but no video.
I tried a lot of ways as folows:
+ video setting : changed TV out --> ON
+ I tried restone ipod to factory condition
+ I tried to change the position of 3 connectors (Yellow,Red, Whitle)
of A/V cable (according to standard, Yellow is video connector).
+ I tried some tips from Discussion Techniques from Apple Forum
But I still can't see video, just hear audio from Television.
What's problem?
I think Ipod only send the audio signal, not video signal.
Can you help me to solve this problem?
Thank you very much.

As well I had the same problem with my i-pod and the one of my wife. The solution was simple:
config: i-pod 60Gb; i-pod 30Gb
cable: no name audio/video A/V cable
TV-out: select ask (not on!!!)
cable into TV: white on white
yellow on red
red on yellow
There are no problems with bad video quality if volume is high, just working fine
What may be the problem: I think, the automatic detect (if you put your setting for TV-out on your i-pod to on) is not working. As well as using only headphones there must be an electronic cirquit detection; means with no Apple stuff just not working. As well there are the yellow and red cable changed; means white and yellow have audio; red video.
Working so for video and diashow on my pod each time I´ve to select TV-Out manually starting video or Dia Show. In that moment both applications are starting in small windows, not in Full Screen mode on the pod.
The order to connect TV or i-pod doesn´t matter; it´s just the manual setting the i-pod for TV-out.
I hope, the info can help you.
i-pod 60Gb Windows XP Pro

Fade Out audio problem

Hi,
I've been trying to add a fade out transition to the end of a clip in iMovie HD but when I do so it fades the video to black but the audio does not fade, rather it stops and seems to play another clip of audio that does not match the video. The fade clip in the time line does show the audio as set to fade out. Any idea's?
Thanks!

iMovie sometimes plays video (..and audio..) from a memory cache, and doesn't always play the actual effect you've set up.
You could try Quitting from iMovie and then restarting the program and see if things play properly ..or, better still;
1. Remove your Fade Out.
2. Split your video clip just before where you want to apply the Fade.
3. Extract the audio from the short clip.
4. Apply the Fade Out ..the audio will be unaffected.
5. Click 'View' and 'Show Clip Volume Levels' (or press Shift⌘L.
6. Click on the line - in your extracted audio clip - which shows the normal volume level. Click further to the right and then drag down the right-hand portion of the line to create the audio fade you want.
Although this pic shows audio edited that way through a Cross Dissolve transition (..hence two extracted audio clips!..) it'll give you an idea of what the faded, separate audio clip should look like.
Click on the picture to see a larger, clearer version.

Is it possible to burn a playlist to a CD with fade-outs & fade-ins?

I can burn a playlist to a CD with start time and end time edits and I can regulate the number of seonds between tracks. But when I try to burn a CD that has been set to cross fade, the burn process ignores the fade out and fade in and just burns the songs at regular volume from start to finish. I unselected the automatic sound check feature, but that didn't solve the problem.

jhcm4202 wrote:
I can burn a playlist to a CD with start time and end time edits and I can regulate the number of seonds between tracks. But when I try to burn a CD that has been set to cross fade, the burn process ignores the fade out and fade in and just burns the songs at regular volume from start to finish. I unselected the automatic sound check feature, but that didn't solve the problem.
The Crossfade effect only applies to playback in iTunes. It does not carry over to audio CDs burned using iTunes nor iPod transfers.
My guess is you will need to doctor the individual audio files first with a third-party utility before burning these new tracks to a CD.
Steve

Problems with fade outs - audio

Similar Messages

Maybe you are looking for