Problems with Fetch settings on 4s

I set the Fetch to manual. Now, I can't find a way to turn it back on. All the email, Facebook, and Twitter accounts, and the Fetch New Data switch are grayed, and won't let me do anything. Someone help? Thanks!

Ha! Fixed it! I forgot that I had also enabled Restrictions, so I was unable to access those controls. peace

Similar Messages

Problem with Mail settings - PDF document is not sending

Hi Experts,
During sales order confirmation, a PDF attachment used to be sent.
But now the customer is receiving the file with extension as .OTF instead of .PDF.
Where could be the problem with this? Is this something wrong in SOCT setttings?
But for some other scenarios, the same is working so i don't think that there is a problem with SCOT settings.
Please let me know if anybody has an idea about this problem or susgestion to find the problem
Regards,
Vijay

Hi Gangisetty,
I guess there is no need to change any settings.
You just need to change format from OTF to PDF using some FM.
You can refer following links for conversion of OTF to PDF.
Re: sending INVOICE as attachment in PDF for external Mail address
FM to send an email with a PDF attachment
http://an-abaper.blogspot.com/2009/07/sending-smartform-as-pdf-through-mail.html
Hope this will help you.
Regards,
Vivek

TS3899 iPad mail account says problem with 'ssl settings' - can you help me?

iPad mail account says problem with 'ssl settings' - can you help me?

The 4Gs hardware, only 256 MB of RAM, prohibits updating beyond 6.1.6.
Starting when iOS 7 was released, Apple now allows downloading the last compatible version of some apps (iOS 4.2.1 and later only)
App Store: Downloading Older Versions of Apps on iOS - Apple Club
App Store: Install the latest compatible version of an app
You first have to download the non-compatible version on your computer. Then when you try to purchase the version on your iPod you will be offered a compatible version if one exists.

Export Release Build - Problem with Server Settings

Hello, i have a big problem and i searched the whole day yesterday but didnt found an answer...
I started a Flex Mobile and PHP Project. The Project has a Data/Services included wich loads some customer from a database (sql)... for the first a
used Zend and try it local (http://localhost and used the htdocs Folder of Zend)... EVERYTHING WORKS PRETTY FINE... so NOW my problem
I wanted to export this project to a release build for my android phone... so the first warning of Flash Builder ist that the project ist currently configured to access data services from a local url. Before exporting the application, you may need to deploy your services to a remote server, then change the server root URL for your project. Click here to change server settings.
When i click the button i get the server setting.
Web root: C:\Program Files (x86)\Zend\Apache2\htdocs
Root URL: http://localhost
whe i change it now i get an eror:"The selected web root folder does not exist (i attached i screenshot of it).
i entered de domain of my server (i also tried the ip) at Root URL. And i think there ist a problem with the Web root...? i get scary

i know WHY Flashbuilder tells me that i have to change the setting when i deploy on the device
my problem ist that i got this error...
and the domain wich i have in the screenshot should only explain how i tried it...
i entered my server url (the real domain) and i entered the folder "app" wich i have created via ftp on my server...
BUT i also get this error (lik in the screenshot)
i think at ROOT URL i cant make lot mistakes .... http://myserver.de or the ip
but i think maybe my web root ist incorrect? i entered here the folder wich is directliy on my server...?
i dont know exactly but i got an error like in the screen

Problem with memory settings

Hello,
i got a brand new PC4000 PRO from corsair and i got problem setting timings with this motherboard (neo2 PFISR - bios v3.9).
I can't set CAS timing nor to 3 neither to 2, it automatically turns it back to 2.5.
It seems that there is a lot of users having the same issues with this motherboard all over the net, but they told me to post here.
Has anybody an idea why this happen and how i can fix it ?
Thanks,
Fab

Hi there,
For some reason the BIOS settings have a rather confusion relation.
This is what my experiences have been, please try them and report your findings:
- MAT is enabled (and overrules SPD or manual memory timings) if:
Memory clock is set to "auto" within the frequency menu AND you set your perfomance above FAST.
To get a stable system, I'd advice the following:
- Go back to default BIOS settings.
- Disable D.O.T.
- Disable Spread Spectrum
- Fix your memory frequency to what it should be (e.g. 400Mhz), and not AUTO.
- Choose SPD timings for your memory (or set them below SPD timing manually).
- Start with performance settings to SLOW.
Check memory timing settings (chipset) with AIDA or CPU-z.
Check stability with Prime95 & torture test on maximum RAM.
Once the system is table, try upping the speed setting, check the actual timings and see what happens. If you still have problems, take out one memory stick and try with just one (maybe one is faulty).
Once you got it stable, continue from here.
Keep in mind: in my experience, if you set your memory frequency at a fixed frequency and use SPD settings, you will find that upping the performance settings, changes the memory timings! However as long as the frequency is not AUTO, MAT is not enabled, whatever the performance setting.
It really confused me at first, as I could not get the system running with MAT enabled, whatever memory time I entered. But with fix memory frequency, I got the system stable with 2,2,2,5 timing!
If anyone has techdoc on these matters, I'd appreciate an URL.
Bios 2.3 on 865PE neo2-LS
Twin Kingston ValueRam Cl2.5 (winbond)

Problem with Global settings panels

Using Flash player v10,1,53,64. with IE7 and Safari 5. I am trying to turn off the auto update notification as I work in an infant school and the pop-up notifications confuse the children.
Flash objects are working fine and the http://www.adobe.com/software/flash/about/ page tells me that I have the version of Flash installed with no problem.
I then right click on an active Flash object on a web page and choose "Global settings..."
Then choose Global Notification Settings Panel... , which takes me to http://www.macromedia.com/support/documentation/en/flashplayer/help/settings_manager05.htm l
At this point, instead of the panel I get the "This content requires Flash" replacement item - so I can't go any further. The same sthing happens with any of the Settings panels.
So one page on the Adobe site says I have the player installed, others don't.
Help much appreciated.

pwillener wrote:
Does that happen on all browsers?
Anyway, another way of disabling update notifications is by using a mms.cfg file; see http://kb2.adobe.com/cps/167/16701594.html for details.
It has happened with all the browsers I have checked, some may be a bit out of date as we don't use them regularly but I have the problem with
Internet Explorer 7.0.5730.13
Safari 5.0
Firefox 3.0.19
Chrome 5.0.375.86
I'll have a look at the mms.cfg option this afternoon.
I'm beginning to wonder whether this is caused by a firewall problem. I don't control the firewall settings. I've been assured by our network team that there is no block, but I'm wondering if that is right. I suppose they could have a block on flash content from not specifically authorised sites (which might well include Adobe) that would still let the Adobe site interrogate to find out the Flash version - but as I'm not 100% certain how the protocols work I can't be sure, I'll have to recheck that one.
Thanks for the help so far.

Problem with national settings on DS9i

Hi all,
I just installed Forms Developer 902 on Windows NT.
In registry my NLS_LANG=POLISH_POLAND.EE8WIN1250.
The Form i Menu module support my national settings
and don't have any problem with polish font.
My destination platform for OAS 902 is SUSE80 Linux.
I maked ftp binary copy *.fmb and *.mmb files from NT
to destination platform and compile everything.
But Form and Menu module not support my national settings.
Where is problem? Maybe any idea?
In {ORACLE_HOME}/bin/f90genm.sh
is NLS_LANG=POLISH_POLAND.EE8MSWIN1250 and
in {ORACLE_HOME}/forms90/server/default.env
is NLS_LANG=POLISH_POLAND.EE8MSWIN1250

Hi Billhp49,
Here are the first things I would try for being unable to send mail:
iOS: Unable to send or receive email
http://support.apple.com/kb/ts3899
Cheers!
- Ari

Problem with Blacklight-settings

I recently purchased my first IPod (30GB) and I'm having a problem with a couple of settings. The blacklight is set to switch on after 10 seconds and at the same time my Ipod starts playing music (even when the lock is on). Did I forget to change a setting? I can't seem to figure it out. If anyone could get back to me about this I would really appreciate it.
Thanks in advance!
APPLE MA146 IPOD VIDEO 30GB BLACK Windows XP Pro

I recently purchased my first IPod (30GB) and I'm
having a problem with a couple of settings. The
blacklight is set to switch on after 10 seconds and
at the same time my Ipod starts playing music (even
when the lock is on). Did I forget to change a
setting? I can't seem to figure it out. If anyone
could get back to me about this I would really
appreciate it.
Thanks in advance!
APPLE
MA146 IPOD VIDEO 30GB BLACK Windows XP Pro
That sounds like the alarm is set if it comes on after a set time. You can find the menu options for this in -- extras--clock--alarm clock. This is where you select the play list to play on wake up.
Hope this helps

Problem with SlideShow Settings

Hi
I've just upgraded to iPhoto'09 and it's working great, but I have a problem with the SlideShow settings:
When I choose a face, event or a place and press the "Play" button to start the slide show, I choose the settings I want (like unchecking repeat slide show and checking shuffle slide order), and check "use settings as default), when I close iPhoto or change the face, place or event, settings come back to their original status, not the ones I chose and made as default.
Any Ideas?

That's because you've set the default for that Slideshow, not all slideshows.
Regards
TD

Problem with configuration settings.

I have a Nokia 3110 classic .Recently I had a problem with Personal Configuration settings .
When I want to add new App types it displays "Cannot add new account.Memory Full."
So I also cannot be able to save Configuration settings as it displays"Only 70 sets allowed.Settings discarded".
So please help me.
Solved!
Go to Solution.

A workaround is available on internet, Not on this forum. But i am afraid i am not allowed to post it here.
Try to Google this keyword " Only 70 sets allowed.Settings discarded"
Previous Phones: 6600, 7610, 6230, 6230i, 1100, 1112, N70, N73, N95, N95 8GB, 5800XM, 5230, C5, iPhone 3GS, SE Xperia X10, N900, N8, SE Xperia Arc
Current Phones: Nokia N9, iPhone 4

This is a tough one! Problem with sequence settings....

OK...where to begin!
Here is some background (I have posted many questions about these issues and have resolved most of them, except this project)
1.Recently upgraded to 6.0.1
2. 'lost' my scratch disc (ok, I accidently deleted it)
3. All projects are OK to do without, except this one!
4. The footage for this project was from 2 cameras: one is DV and one is HD. The HD footage was downgraded to DV during capture from camera for the original project. Now, with 6.0.1, I bring it in HD and mix the footage on the same timeline with the DV (which is so cool and so much easier for me!) But I wanted to make sure and do the same thing I did for the original clips on this project, so when I just batch captured all the clips, I brought the HD in as DV. Both were shot wide screen.
This one sequence is 6 minutes long and I COULD recreate it, but it is very detailed and has a lot of filters, edits, etc. Here is the problem:
I did a batch capture on all the clips and successfully got all the clips back and the timeline plays, but the two different "cameras" footage looks different in the canvas: (the sequence settings are frame size: ntsc dv 3:2, pixel aspect ratio ntsc-ccir601/dv and anormorphic is checked)
The HD footage, downgraded to DV, looks fine
The DV footage is stretched, and has a bar on the top and bottom.
I have played around with the sequence settings and these are the best results i can get.
Now I made a new sequence with same settings as above and i dragged a couple different clips from the browser into the timeline and they are fine... (these clips are the same ones in the problem sequence that look stretched)
Any ideas??
Thanks in advance!!

I understood that the sequence looked at the first stuff dropped into it for behavior. If you dropped the problem material from the first sequence into the second sequence you created prior to dropping any thing else in then it will behave as you would expect. if you dropped footage that wasn't formatted the same as your sequence settings you get the "...would you like to ..." and the sequence settings get changed. I avoid this because some of the changes applied don't allow my Kona to playout.

Problem with fetch cursor statement

Hi,
I am using FETCH CURSOR statement to fetch the data from a database table with package size. For the fetched records I am doing parallel processing using parallel processing frame work in banking system.
Here the problem is for the first iteration it works fine but when it comes to FETCH NEXT CURSOR in the second iteration , programs gets dumping by saying that 'CURSOR already closed'.
I am not closing the cursor in the program but some how it got closed some where in the standard function module which I used for parallel processing.
I used WITHHOLD also along with FETCH CURSOR but no use. Please let me know how to avoid the cursor to get close.
Below is my code
IF NOT l_tab_product IS INITIAL.
    OPEN CURSOR WITH HOLD lv_cursor FOR
     SELECT contract_int prodint cn_currency mig_grp
          INTO TABLE gt_cont
            FROM bca_contract
            FOR ALL ENTRIES IN l_tab_product
            WHERE prodint = l_tab_product-prodint
            AND   mig_grp IN s_migrp.
    DO.
      FETCH NEXT CURSOR lv_cursor
                        INTO TABLE gt_cont
                             PACKAGE SIZE lv_size.
      IF sy-subrc <> 0.
        CLOSE CURSOR lv_cursor.
        EXIT.
      ELSE.
parallel processing logic
ENDDO.
ENDIF.

Using Withhold will not make sure that the cursor will not get closed because of commits.
SAP Doc says
If the addition WITH HOLD is specified, the database cursor is not closed by a database commit executed using Native SQL. The addition does not have an influence, however, on implicit database commits or on any rollbacks which always close the database cursor.
You have to check the part written in your parallel processing logic.
As Brad said please donot dump your old threads like this.

Problems with server settings for IMAP account

hi
i am trying to configure Mail to work with an IMAP account. i can receive messages OK on this account, but cannot send mail. when i try to send mail i get an error message "sender verify failed".
there was an automated process for adding the account to mail which i installed, and got the following settings:
outgoing mail server: mail.soterianetwork.org
server port: 26
authentication: password
username: soteria
password: ****** (the password is correct)
the error message i get is 'sender verify failed'.
i have also tried ports 25 and 587 without success.
on the web based control panel for the mail account it says: Be sure to enable SMTP Authentication in your E-mail client or you may not be able to send mail.
not sure if i have done this. i have tried changing the outgoing mail server to smtp.soterianetwork.org, still without success
i would be grateful for some help to get this set up correctly
thanks
nick

it was a problem with the server. they changed some settings and all is working fine

Problems with transparency settings

Hello everyone
I'm having some problems with the transparency settings of my u3d model when I import it in a new Acrobat sheet. I defined an animation with some transparencies in 3D Toolkit and when I import the whole animation into Acrobat 3D the transparency settings disappear, the whole model can be seen. Any ideas why?
Thank you
XR

Xavier,
I would recommend visiting Right Hemisphere's "Deep Exploration" forum for an answer to this.
http://www.righthemisphere.com/forum/forumdisplay.php?s=&forumid=16

Swing Applet in JSP: problem with fetching data from database

i am facing a problem while fetching data from database using Swing Applet plugged in a JSP page.
// necessary import statements
public class NewJApplet extends javax.swing.JApplet {
private JLabel jlblNewTitle;
private Vector vec;
public static void main(String[] args) {
JFrame frame = new JFrame();
NewJApplet inst = new NewJApplet();
frame.getContentPane().add(inst);
((JComponent)frame.getContentPane()).setPreferredSize(inst.getSize());
frame.pack();
frame.setVisible(true);
public NewJApplet() {
super();
initGUI();
private void initGUI() {
try {
this.setSize(542, 701);
this.getContentPane().setLayout(null);
jlblTitle = new JLabel();
this.getContentPane().add(jlblTitle);
jlblTitle.setText("TITLE");
jlblTitle.setBounds(197, 16, 117, 30);
jlblTitle.setFont(new java.awt.Font("Dialog",1,20));
jlblNewTitle = new JLabel();
this.getContentPane().add(jlblNewTitle);
Vector vecTemp = getDBDatum(); // data fetched fm DB r stored here.
jlblNewTitle.setText(vecTemp.get(1).toString());
jlblNewTitle.setBounds(350, 16, 117, 30);
jlblNewTitle.setFont(new java.awt.Font("Dialog",1,20));
} catch (Exception e) {
e.printStackTrace();
}//end of initGUI()
private Vector getDBDatum() {
// fetches datum from oracle database and stores it in a vector
return lvecData;
}//end of getDBDatum()
}//end of class
in index.jsp page i have included the following code for calling this applet:
<jsp:plugin type="applet" code="NewJApplet.class" codebase="applets"
width="600" height="300">
<jsp:fallback>Could not load applet...</jsp:fallback>
</jsp:plugin>
if i view it in using AppletViewer it runs perfectly and display the data in JLabel. (ie, both jlblTitle and jlblNewTitle).(ie, DATA FETCHES FROM db AND DISPLAYS PROPERLY)
BUT IF I CLICK ON INDEX.JSP, ONLY jlblTitle APPEARS. jlblnNewTitle WILL BE BLANK(this label name is supposed to fetch from database)
EVERY THING IS DISPAYING PROPERLY EXCEPT DATA FROM DATABASE!!!
i signed the applet as follows :
grant {
permission java.security.AllPermission;
Can any body help me to figure out the problem?

This is the Swing Applet java code
import java.awt.Dimension;
import java.sql.Connection;
import java.sql.ResultSet;
import java.sql.SQLException;
import java.sql.Statement;
import java.util.Vector;
import javax.swing.tree.DefaultMutableTreeNode;
import javax.swing.JScrollPane;
import javax.swing.JApplet;
import javax.swing.JButton;
import javax.swing.JComponent;
import javax.swing.JFrame;
import javax.swing.JLabel;
import javax.swing.JTree;
import javax.swing.ScrollPaneConstants;
import javax.swing.SwingConstants;
public class HaiApplet extends javax.swing.JApplet {
     private JLabel     jlblTitle;
     private JLabel     jlblNewTitle;
     private Vector     vec;
     * main method to display this
     * JApplet inside a new JFrame.
     public static void main(String[] args) {
          JFrame frame = new JFrame();
          NewJApplet inst = new NewJApplet();
          frame.getContentPane().add(inst);
          ((JComponent)frame.getContentPane()).setPreferredSize(inst.getSize());
          frame.pack();
          frame.setVisible(true);
     public HaiApplet() {
          super();
          initGUI();
     private void initGUI() {
          try {
               this.setSize(542, 701);
               this.getContentPane().setLayout(null);
                    jlblTitle = new JLabel();
                    this.getContentPane().add(jlblTitle);
                    jlblTitle.setText("OMMS");
                    jlblTitle.setBounds(197, 16, 117, 30);
                    jlblTitle.setFont(new java.awt.Font("Dialog",1,20));
                    jlblTitle.setHorizontalAlignment(SwingConstants.CENTER);
                    jlblTitle.setForeground(new java.awt.Color(0,128,192));
                    jlblNewTitle = new JLabel();
                    this.getContentPane().add(jlblNewTitle);
                    Vector vecTemp = getDBDatum();
                    jlblNewTitle.setText(vecTemp.get(1).toString());
                    jlblNewTitle.setBounds(350, 16, 117, 30);
                    jlblNewTitle.setFont(new java.awt.Font("Dialog",1,20));
          } catch (Exception e) {
               e.printStackTrace();
     }//end of initGUI()
     private Vector getDBDatum() {
          Vector lvecData = new Vector(10,5);
          Connection lcon = null;
          Statement lstmt = null;
          ResultSet lrsResults = null;
          String lstrSQL = null;
          String lstrOut = null;
          try {
               OmmsDBConnect db = new OmmsDBConnect();
               lcon = db.connectDb();
               lstmt = lcon.createStatement(lrsResults.TYPE_SCROLL_SENSITIVE, ResultSet.CONCUR_READ_ONLY);
               lstrSQL = "select DT_ID from P_DATATABLES";
               lrsResults = lstmt.executeQuery(lstrSQL);
               int i = 0;
               lrsResults.last();
               int length = lrsResults.getRow();
               System.out.println(length);
               lrsResults.beforeFirst();
               int recCount = 0;
               while (lrsResults.next()) {
                    recCount++;
                    lvecData.addElement(new String(lrsResults.getString("DT_ID")));
               //     System.out.println("ID : " + lrsResults.getString(1));
                    i++;
               }System.out.println("here 3 out fm while");
          catch(SQLException e) {
               System.out.print("SQLException: ");
               System.out.println(e.getMessage());
          catch(Exception ex) {
               lstrOut = "Exception Occured " + ex.getMessage();
          finally {
               try {
                    lrsResults.close();
                    lstmt.close();
                    lcon.close();
                    System.out.println("[DONE]");
               catch(Exception e) {
                    System.out.println(e);
         }//end of finally
          return lvecData;
     }//end of getDBDatum()
}//end of classOfcourse the above code compiles and runs well. in Applet Viewer
I plugged the above Swing Applet in a JSP page index.jsp
<jsp:plugin type="applet" code="NewJApplet.class" codebase="applets"
               width="600" height="300">
     <jsp:fallback>Could not load applet...</jsp:fallback>
</jsp:plugin>Every thing is working fine in AppletViewer...But if i view this in any browser, then only the jlblTitle is displaying. jlblNewTitle is not displaying(this label name is actually fetching from thedatabase)
can any body help me regarding this matter.? Thx in Advance.

Problems with Fetch settings on 4s

Similar Messages

Maybe you are looking for