Problems with FF orange-tab menu coming down when I use Alt keys

I have had this small issue since yesterday which is more confusing than anything.
When I go to type something, and use the alt keys plus the numbers for designs, the little orange FF tab on the top left-hand corner pulls down the drop-menu, and has 'Files' highlighted, plus it makes my computer make the Windows Default Beep, which I disabled because it was just annoying. I am having no notices of anything causing this, but this looks like the only browser that does it, because I went and played around with IE and Chrome, and nothing happened that I could see or hear of.
Thanks for any insight!

Try to switch on Num Lock if you need to use Alt + number keys.

Similar Messages

  • TS3367 My Apple I-Pad 2 has a problem with Facetime. It freezes and disconnects when I use it.

    I'm about ready to quit on this new I-Pad. When I use facetime to call my daughter, (who also got the same apple 2 I-Pad)
    It calls through, freezes on her photo, then keeps trying to reconnect. If anyone has a fix for this, I would appreciate the help!

    Try a Reset [Hold the Home and Sleep/Wake buttons down together for 10 seconds or so (until the Apple logo appears) and then release. The screen will go blank. Be patient, the device will power ON again in the normal way. It is app and data safe!]

  • Recently having problem with flickering on monitor (viewsonic vg2436wm).  When coming out of sleep mode.  The screen goes gray, sometime out.  Have to press power button to get screen on.  Problem stops.

    Recently having problem with flickering on monitor (viewsonic vg2436wm).  When coming out of sleep mode.  It will flicker, the screen goes gray, sometime out.  Have to press power button to get screen on.  Problem stops.  Getting more frequent.  After sometime problem stops. My system is a Mac Mini 2010, 2.4 intel core 2 duo, 2 GB, running OSX10.8.5

    See if it's related to this...
    The 2012 macs (and later apparently) not waking normally from sleep after hours being in sleep. (noted here ...
    http://www.xlr8yourmac.com/archives/feb13/022813.html#2012macswontwake
    "Why 2012 iMac/2012 Mac Mini won't Wake After Hours of Sleep (Hibernates/Powers Off)")
    The sleepimage file still reappears even if never slept. Delete it (hibernate off, etc) - within minutes its back.
    A note on that here - http://www.xlr8yourmac.com/feedback/Chameleon_SSD_Optimizer.html
    About iMac sleep...
    http://forums.macrumors.com/showthread.php?t=1529750
    Try this: "sudo pmset autopoweroff 0" and "sudo pmset standby 0"
    http://xlr8yourmac.com/archives/sep13/091313.html#10.8.5SleepEjectTip

  • Hai ian having problem with iphone 4 is suddenly shut down automatically when it is near 2 30-50%  can u plz tell soutions for that plz

    hai ian having problem with iphone 4 is suddenly shut down automatically when it is near 2 30-50%  can u plz tell soutions for that plz

    This is most often due to faulty battery. Apple Genius can perform a quick several minute battery diagnostic test. Make Genius Reservation.

  • Is anyone having problems with the facebook app - just shuts down before it even loads - frustrating!

    Is anyone having problems with the facebook app - just shuts down before it even loads - frustrating!

    Hi Robk573,
    Thanks for visiting Apple Support Communities.
    I'd suggest the steps in our iPad troubleshooting assistant:
    https://www.apple.com/support/ipad/assistant/application/
    Best,
    Jeremy

  • HT4889 After using migration assistant I have had problems with some apps that were brought down from App store, as well as IntelliJ that just doesnt want to start at all. Does it have anything to do with the UID being changed?

    After using migration assistant I have had problems with some apps that were brought down from App store, as well as IntelliJ that just doesnt want to start at all. Does it have anything to do with the UID being changed?
    13-07-03 6:24:12.447 PM com.apple.launchd.peruser.502[1632]: ([0x0-0x5be5be].com.jetbrains.intellij[5805]) Job failed to exec(3) for weird reason: 13

    What is the exact name of the application you're trying to launch? Is it in the Applications folder?

  • Problem with Photoshop CS6. If I open a file using Camera RAW

    I have a new problem with Photoshop CS6.  If I open a file using Camera RAW, and process it as usual, CS6 doesn't want to save it the way it used to.  I don't know if I changed something by accident or not. 
    Here's what happens now: After opening from ACR to CS6 and completinhg all of my work, I choose "Save as..."  The save as window opens showing the file name and format.  The default format seems to be .PSD.  I use the drop down to select .jpg.  The file saves normally as a .jpg.  When I go to close the image from, I get a new prompt asking, "Save changes to Adobe Photoshop document DSC_xxxx.NEF before closing?
    I looked up at the file name in the bar above the work space and noticed that it does NOT change from "DSC_xxxx.NEF" to "DSC_xxxx.jpg" after I have saved the file as a .jpg,in my webesite  but it always used to do that.  This adds a few extra steps when closing a document and it really slows me down.
    In fact, I wouldn't swear to this, but I think it used to save to .jpg by default, without me specifying this.
    I don't see a setting in the preferences for what to use as the default file format for saving, so I don't know where to change it back.
    Any ideas?
    Thanks in advance

    You are in the wrong forum;  You actually need Photoshop forum at this link:
    <http://forums.adobe.com/community/photoshop?view=discussions>
    Hope you can repost your question at the correct link.

  • HT201210 I m having problems with both my iphone 3gs and 4 when my cellular data is on and my battery is fully charge but out of suddenn it will shut off can i know how can i troubleshoot this issue thanks

    I m having problems with both my iphone 3gs and 4 when my cellular data is on and my battery is fully charge but out of suddenn it will shut off can i know how can i troubleshoot this issue thanks

    simply try doing a back up and restore
    when going thru the activation screen, select SET UP AS NEW and then test your device. if it is not shutting down then it could be 1 or more apps tht have been downloaded wch could be affecting the device
    you will then need to follow the process of eleimnation, meaning add 2 apps and then monitor your phone, if nothing happes then add another couple of them and then check
    good luck !!

  • I have a problem with the external sound of my ipod, when I take the headphones the music keeps playing and the ipod recognizes still have a headset connected. how do I get external sound out?

    I have a problem with the external sound of my iPod, when I take the headphones the music keeps playing and the ipod recognizes still have a headset connected. how do I get external sound out?

    - Try insering and removing the headphone plug a dozen times or so.
    - Try cleaning out the headphone jack in the iPod.
    - Resett he iPod. Nothing is lost
    Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Restore from backup
    - Restoe to factory defaults/new iPod
    If yu still have the problem that indicates a hardware problem, likely a bad headphone jack. Yu can make an appointment at the Genius Bar of an Apple store to confirm.
    If not underwarranty Apple will only exchange your iPod for a refurbished one for:
    Apple - Support - iPod - Repair pricing
    A third-party place like the following is less expensive. Here is one. Google for more.
    iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens

  • Communication problem with Adobe 9.0 and HP Printer when I scan

    I'm having a problem getting a .pdf file to come up when I scan from a HP 5610 All-in-one printer. Have uninstalled and reinstalled HP software three times but when I scan and want a pdf file it won't communicate with Adobe 9.0 reader for some reason. Is there a setting in Adobe reader that's a problem?
    Thanks.

    Thanks...found out that an HP5610xi All-in-One will not completely communicate with Adobe 9.0   Had to go to Adobe 6.0
    Date: Thu, 17 Dec 2009 03:19:49 -0700
    From: [email protected]
    To: [email protected]
    Subject: Communication problem with Adobe 9.0 and HP Printer when I scan
    May be that the HP software doesn't support Adobe Reader 9.
    >

  • I am having a problem with my cs6 running very slow and when i save i am getting an error message that says, "This document is bigger than 2 gb (the file may not be read correctly by some TIFF viewers.) please help

    I am having a problem with my cs6 running very slow and when i save i am getting an error message that says, "This document is bigger than 2 gb (the file may not be read correctly by some TIFF viewers.) please help

    wen6275,
    It looks like you're actually using a camera or phone to take a photo of your monitor.
    That's not what is commonly known as a "screen shot". 
    It looks like you're on a Mac.  Hitting Command+Shift+3 places a capture of the contents of your entire monitor on your Desktop; hitting Command+Shift+4 will give you a cross-hairs cursor for you to select just the portion you want to capture.
    I'm mentioning this because I fear I'm not construing your original post correctly when you type "I am working with a large files [sic], currently it has 149 layers, all of which are high resolution photographs", so I'm wondering if there's some similar use of your own idiosyncratic nomenclature in your description of your troublesome file.
    Perhaps I'm just having a major senior moment myself, but I'm utterly unable to imagine such a file.  Would you mind elaborating?

  • Hello. I have a problem with OEL 6.5 and ocfs2. When I mount ocfs2 with mount -a command all ocfs2 partitions mount and work, but when I reboot no ocfs2 partitions auto mount. No error messages in log. I use DAS FC and iSCSI FC.

    Hello.
    I have a problem with OEL 6.5 and ocfs2.
    When I mount ocfs2 with mount -a command all ocfs2 partitions mount and work, but when I reboot no ocfs2 partitions auto mount. No error messages in log. I use DAS FC and iSCSI FC.
    fstab:
    UUID=32130a0b-2e15-4067-9e65-62b7b3e53c72 /some/4 ocfs2 _netdev,defaults 0 0
    #UUID=af522894-c51e-45d6-bce8-c0206322d7ab /some/9 ocfs2 _netdev,defaults 0 0
    UUID=1126b3d2-09aa-4be0-8826-0b2a590ab995 /some/3 ocfs2 _netdev,defaults 0 0
    #UUID=9ea9113d-edcf-47ca-9c64-c0d4e18149c1 /some/8 ocfs2 _netdev,defaults 0 0
    UUID=a368f830-0808-4832-b294-d2d1bf909813 /some/5 ocfs2 _netdev,defaults 0 0
    UUID=ee816860-5a95-493c-8559-9d528e557a6d /some/6 ocfs2 _netdev,defaults 0 0
    UUID=3f87634f-7dbf-46ba-a84c-e8606b40acfe /some/7 ocfs2 _netdev,defaults 0 0
    UUID=5def16d7-1f58-4691-9d46-f3fa72b74890 /some/1 ocfs2 _netdev,defaults 0 0
    UUID=0e682b5a-8d75-40d1-8983-fa39dd5a0e54 /some/2 ocfs2 _netdev,defaults 0 0

    What is the output of:
    # chkconfig --list o2cb
    # chkconfig --list ocfs2
    # cat /etc/ocfs2/cluster.conf

  • Hello apple I have the problem with my iPhone and my friends have this problem too. My iPhone have the problem about calling and answer the call. When I use my iPhone to call I can't hear anything from my iPhone but the person that I call can answer it bu

    Hello apple
    I have the problem with my iPhone and my friends have this problem too.
    My iPhone have the problem about calling and answer the call. When I use my iPhone to call I can't hear anything from my iPhone but the person that I call can answer it but when answer both of us can't hear anything and when I put my iPhone to my face the screen is still on and when I quit the phone application and open it again it will automatic call my recent call. And when my friends call me my iPhone didn't show anything even the missed call I'm only know that I missed the call from messages from carrier. Please check these problem I restored my iPhone for 4 time now in this week. I lived in Hatyai, Songkhla,Thailand and many people in my city have this problem.
    Who have this problem??

    Apple isnt here. this is a user based forum for technical questions. The solution is to restart, reset, and restore as new which is in the manual after that get it replaced for hard ware failure. if your within your one year warranty its replaced if it is out of the warranty then it is 199$

  • I have a problem with buying apps in itunes Store. When you purchase the application fails payment. Asked to update the map. I have 2 credit cards with a positive balance. In what could be the reason?

    I have a problem with buying apps in itunes Store.
    When you purchase the application fails payment.
    Asked to update the map.
    I have 2 credit cards with a positive balance.
    In what could be the reason?

    contact itunes support

  • Problem with InDesign CC redrawing the screen too slow while using Zoom tool

    Hello. I got a problem with InDesign CC redrawing the screen too slow while using Zoom tool. Sometimes it takes more than a secong to zoom in or out. However InDesign CS6, Photoshop CC, Illustrator CC works just fine. What could be the problem, videocard or something else? Below is my PC configuration: OS Windows 8 Pro (x64); processor Intel Core i7 2600k CPU 3,40GHz; video adapter NVIDIA GeForse GTS 450; monitor NEC PA271W (2560x1440).

    Yes it’s a bug. The trick is to select the tool and then left click the photo information strip and hold for a few seconds until you see the windows bar at the top of the screen (not responding)
    The lasso tool should then work normally.

Maybe you are looking for

  • ITunes match deletes all my music from my iPhone (the second time now)

    This is the second time my music app is empty. It shows all my songs in the cloud but i have to download all the songs again. Whats interresting is, i have to delete the albums first because there is no cloud symbol in "albums" and "artists" so i can

  • [solved] fancontrol - fan speed doesn't seem to change after boot

    I used fancontrol to control my fan but after I rebooted it doesn't seem to speed up the fan when it hits MAXTEMP whereas it did before I rebooted. Before the boot I set the CPU governer to performance (3.1Ghz) to heat up the cpu to test the fan cool

  • Usage BAPI_ACC_DOCUMENT_POST

    Hi all I'm using BAPI_ACC_DOCUMENT_POST  for FB01, I have some proble because I don't understand where I have to put the item data (the record which will be inserted in bseg) which structur I have to use? documentheader in only for the header data, i

  • Entire image moves when using the Healing Brush

    After I alt/click to select the color for the brush, the entire image moves with the mouse.  Any ideas on this? Message title was edited by: Brett N

  • APPELLO : IPAD 2 con IOS 8.0x LENTEZZA

    Dopo l'aggiornamento 8.0 e 8.02 il sistema è diventato LENTISSIMO. Fai un touch e passano SECONDI prima di avere una reazione, scorri le pagine in Safari e ci voglio secondi per visualizzare avanti ed indietro pagine già caricate! E potrei fare decin