Problems with file/print sharing between macs

I just recently created a network between my mac pro and my imac. I discovered that the only way that I could share files/printers between the two is if I shut off the firewall on both machines. If I let the firewall 'allow only essential services ie, file and printer sharing, the machines would see each other and the printers, but would not allow either to connect. Any suggestions?

Thanks a lot Frank.
The firewall has always been disabled, since I baught my iBook.
There's two issues, the irc app and the videocam app.
Guess the videoapp is an easier issue. The port is 2000-2002
The irc application is I think a little more complicated, it has two settings in the prefs file (the app is IRCLE):
1. In the DCC prefs I flagged the "ADSL, Airport, IPNetRouter and have flagged the auto configure for the Public IP Number (151.51.138.131).
2. There is also a Firewall prefs. I haven't done anything with this. There's an areal called "Ident Settings (OS X only)". There one can flag the "Run Ident on a different port than the usual 113" If one flags that, then you can choose the port (it says it must to be 1024 or greater). "Note: you may need to change your firewall rules to make ident work this way, redirect incoming ident data for TCP port 133 to the port set above"
Does this make any sense?
Thanks a lot again, really,
Emmanuel

Similar Messages

Problem with HP Printer Utility and Mac OSX 10.5.4

I have a problem with HP printer Utility. When a standard user adds a new paper profile HP Printer Utility asks to type an administrator's name and password to allow HP printer Utility to make changes. Is it possible to avoid this? Otherwise I have to give admin rights to every user because they have to be able to add new papers. HP printer Utility sharing and permisssions are set to read and write to everyone.
HP designjet Z3200
MacOSX 10.5.4 (Mac pro intel)
HP printer utility 3.6.0.

Just found an email HP Support sent to me back in January 2008, about this issue
"Hello Hunter,
Thank you for contacting HP Total Care.
There currently is not proper driver for 10.5, so it is surprising that the printer is printing correctly on your Mac from any application.
Your issue cannot be resolved until the 10.5 driver is developed and released.
To sign up for an update as soon as it is available ...click on the link below:
HP's subscriber's choice is a free service where you can select to receive timely email notifications ranging from software and driver updates to creative ways to do more with your HP products.
http://h71036.www7.hp.com/hho/html/3618-0-0-225-121.html
If you need further assistance, please reply to this message and we will be happy to assist you further.
You may receive an e-mail survey regarding your e-mail support experience. We would appreciate your feedback.
For information on keeping your HP and Compaq products up and running, please visit our Web site
at:
http://www.hp.com/go/totalcare
Sincerely,
Dave
HP Total Care"
I just sent them an email today on any updates regarding a release date on the Leopard driver for P1005, i'll post any info i receive.

Problem with Internet connection sharing between eMac and Powerbook G3

Hi,
I seem to be having a slight problem with internet connection sharing.
My eMac is the main machine with the internet connection, and its running 10.4.6, the Powerbook G3 is running 10.2.8.
I can connect them all up and get online with both, but I the problem I am having is when I turn the Firewall on on the eMac, the powerbook can't connect.
Is there anyway I can keep the Firewall enabled and still use internet connection sharing?

How do I know which ports the Powerbook is using?
Also I had web sharing enabled on the eMac and it made no difference at all.
Plus I don't know if this means anything to you, trying to decipher it myself, all I can make out myself on there is port 80.
May 31 21:26:30 Craigs-Macintosh ipfw: 12190 Deny TCP 10.0.2.2:49743 67.15.24.40:80 in via en1
May 31 21:26:34 Craigs-Macintosh ipfw: Stealth Mode connection attempt to UDP 10.0.2.1:192 from 10.0.2.2:49531
May 31 21:26:34 Craigs-Macintosh ipfw: Stealth Mode connection attempt to UDP 10.0.2.1:192 from 10.0.2.2:49532
May 31 21:26:39 Craigs-Macintosh ipfw: Stealth Mode connection attempt to UDP 10.0.2.1:192 from 10.0.2.2:49533
May 31 21:26:39 Craigs-Macintosh ipfw: Stealth Mode connection attempt to UDP 10.0.2.1:192 from 10.0.2.2:49534
May 31 21:26:42 Craigs-Macintosh ipfw: 12190 Deny TCP 10.0.2.2:49743 67.15.24.40:80 in via en1
May 31 21:26:44 Craigs-Macintosh ipfw: Stealth Mode connection attempt to UDP 10.0.2.1:192 from 10.0.2.2:49535
May 31 21:26:44 Craigs-Macintosh ipfw: Stealth Mode connection attempt to UDP 10.0.2.1:192 from 10.0.2.2:49536
May 31 21:29:12 Craigs-Macintosh ipfw: 12190 Deny TCP 10.0.2.2:49746 17.254.0.91:80 in via en1
May 31 21:29:15 Craigs-Macintosh ipfw: 12190 Deny TCP 10.0.2.2:49746 17.254.0.91:80 in via en1

Problem with File/Internet Sharing

Could someone help me with an Airport problem?
I have two Minis: one in the study for general use(PPC, 10.4.9) and one in the kitchen(intel, 10.4.9) for music. So, I thought I’d try and connect them using Airport, but by just using the two computers, ie without a base station/router.
In the sharing panel of System Preferences, I gave the study computer the name “Study”, and the kitchen one the name “Music”. I ticked Personal File Sharing, Personal Web Sharing and Printer Sharing on each computer in the Services and Firewall panels. For “Study”(the Gateway computer) I turned on Internet Sharing using External Modem to computers using Airport. In the menubar, the Airport symbol for “Study” has an arrow in it, and on “Music” it’s the normal symbol.
The following is common to both computers. Clicking on Network in the Sidebar opens a window showing two aliases: Library(which double clicks as broken) and Servers. According to David Pogue’s Tiger OSX Missing Manual, there should be a “My Network” folder.
The Servers alias leads to an alias “The Study”.local or “Music”.local. This opens to the Macintosh HD window of the relevant computer, showing the usual folders. Opening “Users” shows the Home Account folder for that computer and “Music” or ”Study” and Shared.
Opening “Music” or “Study” shows folder icons for the Home Account of the other computer, ie Desktop, Documents, Library, Movies, Music, Pictures, Public and Sites.
The only folders that I can open are Public and Sites. I don’t have the required “privileges” to open the others. In Public is Drop Box, which again I can’t open. If I put a file into the Public folder, it’s not visible on the other computer.
If I connect “Study” to the internet, and open Safari on “Music”, I get a not connected to the internet message.
So, The simple(!!!) question is: what haven’t I done to make it all work.
Answers in words of one syllable please

It sounds like you are using a non-admin account to log into the remote Mac. To see all the folders you can log in using an admin account or use SharePoints to make other folders visible.

Problem with HP Printer Sharing?

I have an HP laserjet 1022 printer that has always worked shared. It's connected to my iMac via usb, and I have always been able to print to it with printer sharing. A few weeks ago however, the print sharing with my macmini and macbook wasn't working. Usually I delete and then readd the printer, but it didn't work this time. Also, now it recognizes the printer, but its trying to use the wrong ?driver? It's trying to use Generic PostScript instead of the normal 1022 it used to use. After my macbook was stolen, I tried to set the printer sharing up with my new macbook pro. That didn't work either. I called HP, but they said there was nothing they could do because it isn't a network printer, it's just printer sharing, and therefore a mac thing. What do I do?

Hi there, I just wanted to let you know what has happened with my printer since.
I called hp, and they said that because the printer didn't have some sort of extended care plan, that they would charge me $45 or I could call Apple. They said specifically that it was Apple's problem (yeah right).
Talked to the most friendly techies ever, and they spent hours on the phone with me trying a bunch of different ideas. Apparently, from what we can figure out, hp simply stopped updating the drivers. When I did try to download the 1022 driver from the website again, it downloads, says its installing, but never actually functions and just disappears. So after everything, even trying the original install cd, we determined that we just can't get it to work.
One interesting thing though:
The printer is plugged into my imac, and I was trying to print to it (using printer sharing) from my macmini, macbook, or macbook pro. None worked.
But, if I plugged in the printer to any other one of those computers via usb and tried to print wirelessly from the imac, it worked perfectly!
Hope things work out for you!

Problems with lack of connection between macs on a network.

For about a month i've had both my macbook and Mac Pro connecting fine over my network but suddenly they don't recognise each other.Is this a problem with my proxie settings within the Network Settings??.Sorry if this question is answered on the forum but i can't find it.
Message was edited by: D-Fiance

If the endpoint doesn't answer the first call, the expected behaviour should be that the TP server tries dialling again as many times as you've set in TMS, but it's only trying once for me.
This might be of interest to you, why TMS might only dial out once to an endpoint, see my reply near the end of the discussion.
conductor-telepresence-server-dial-out-and-redial-when-no-one-answer

Obscure problem with File/Folder sharing

   1. Network Magic Version installed: 5.5.9195.0-Pure0 Platform 11.2.9195.1
   2. Internet connection: Cable (Comcast)
   3. Modem: Arris TM502G
   4. Router: Netgear WNR3500 V1 - Firmware Version: V1.0.29_8.0.29NA
   5. The Method of connection your problem computer has to the Router: Wired
   6. The Connection in use on the problem computer: Ethernet Port is a PCI Adapter Card, Netgear GA311
   7. Operating system: Windows XP Professional SP3
   8. Software Firewall in use: Kaspersky Internet Security 9.0.0.736
   9. Anti-Virus Program: Kaspersky Internet Security 9.0.0.736
I have a problem sharing files between one PC and several others. A while back I changed hostnames for several of my PCs. The problem computer never updated the hostnames - it reports the old hostnames under View Details and Alerts. It's communicating, after a fashion - I can share a folder and it shows up in the other computers, but if I try to open it they report either that the network object can't be found or that permissions are insufficient.
I tried shutting down each PC, then removing it from the Map on the problem computer, then starting it back up and adding it back on the problem computer - but the old host names are retained, still. How can I correct this problem?
Bill

There doesn't seem to be any actual support for Network Magic at the "Support" link - just a bunch of generic FAQs and links to this Forum. I was under the impression that some actual support people hung out here and might be able to research an actual question. I'm having what seems to be a "bug" where the hostname won't update, and I thought A) that someone in product development would care, and B) there might be a way to get it to refresh its information.
Bill

HP printer shared between Mac & PC

After searching the forums I am having to post.
I have a Deskjet 5550 connected to the mac.
I cannot get the printer to print from the PC.
I know they see each other as I am able to access the PC files from my MAC.
I am in the process of making the switch so if you wouldn't mind dummy up any suggestions.
I must be missing a major step??

Major step - on the PC, use a color postscript driver (Apple Color LaserWriter is good). This sends postscript from PC to Mac - the Mac print queue expects postscript input.
http://docs.info.apple.com/article.html?path=Mac/10.4/en/mh1770.html

Java update causes problems with color printing in Mac 10.5

Had a big problem with color printing for the last two weeks. Thought the printer was broken because it would freeze and refuse to be "seen", or would generate error messages. Bought new Samsung 315, and had the SAME problem. Bought new HP CP1518ni, and had the SAME problem. Not resolved after talking to tech support at both places.
Looked for software updates around the time of the onset of printing problems. on May 15 installed "Java for Mac OS X 10.5 update" (1.0) (am running on 10.5.8). Removed the Java preferences files (com.apple.java......plist) and restarted.
Problem solved! Clearly not the printer.

Hmmm. This is about the time my printer stopped printing too. I've now had two printers in my house and had trouble with both of them. What a pain we should not have to delete updates for our stuff to work together.
Renee

I have a problem with color prints from photoshop elements 12. The pictures are too light and with strange colors. I have a Canon pixma mg615I0 printer and use mac os X yosemite. The pictures are taken with a coanon eos 550d in the color space sRGB. I hav

Hi
I have a problem with color prints from photoshop elements 12. The pictures are too light and with strange colors. I have a Canon pixma mg615I0 printer and use mac os X yosemite. The pictures are taken with a coanon eos 550d in the color space sRGB. I have followed adobes recommendations and have tried both letting the printer respektive photoshop manage the colors. But nothing works. I see that there are different opinions about which is best to do so I tried both. I have the latest printer driver installed. Can anyone help me with this?

Do the following:
Print a test page from the printer. Perhaps the print head needs cleaning via its maintenance facility.
Let the printer manage colors, not PSE
Calibrate the monitor

Mac OS 10.7.4, installing Microsoft Office 14.2.7, error "The Installer can't open the package. There may be a problem with file ownership or permissions."

Mac OS 10.7.4, updating new version Microsoft Office 14.2.7, ERROR "The Installer can’t open the package. There may be a problem with file ownership or permissions."
The Apple Installer version is Version 5.0.1 (537).
When I check the Installer Log, I find only these two messages that I do not understand.
Jul 12 09:29:13 Bruces-MacBook-Pro Installer[423]: Install's runner tool is not properly configured as a setuid tool.
Jul 12 09:29:13 Bruces-MacBook-Pro Installer[423]: Unable to create InstallController
I changed all the permissions for all the Microsoft Office Folder users to Read and Write.
Restart, same error

See:
https://discussions.apple.com/thread/1948155?threadID=1948155&tstart=1
I had identical Installer Log failure notices: I used Houdini to view the invisible files and per Limnos' suggestion cautiously dragged
user > library > preferences > com.apple.installer.plist out of that folder onto my desktop and double-clicked on the .pkg file again and it opened and installed properly.
My Installer now works properly on all .pkg files.

ITunes sharing between Mac and PC is not working

iTunes sharing between Mac and PC is not working. No shared music appears.
PC = Win XP SP3; 192.168.1.101
iTunes for Windows 6.0.4.2
Sharing enabled / Look for shared music enabled / Share entire library
Open and running on PC
Windows firewall has exceptions set to allow traffic on TCP 3689, UDP 5353
MAC = OS X 10.4.6; 192.168.1.100
iTunes for OS X 6.0.4(3)
Sharing enabled / Look for shared music enabled / Share entire library
Open and running on Mac
System Preferences | Sharing | Services
Personal file sharing - ON
Windows file sharing - ON
Printer sharing - ON
System Preferences | Sharing | Firewall
Personal file sharing - ON
Windows file sharing - ON
Printer sharing - ON
iTunes Music Sharing - ON (i.e., TCP 3689 open)
iPhoto Bonjour Sharing - ON
Network Time - ON
ROUTER = Linksys BEFSR41v4; Firmware 1.04.01; 192.168.1.1
Functioning as DHCP server
File sharing between Mac & PC works OK
BUT iTUNES MUSIC SHARING DOES NOT WORK IN EITHER DIRECTION
Shared music is not visible
Tried turning both firewalls OFF -- still nothing
Tried installing Bonjour for Windows -- still nothing
ANY suggestions? Please help. Thanks.
1.8 GHz PowerPC G5 Mac OS X (10.4.6)

Hi cbafiero,
It seems that the problem lies in your router. I'm not sure exactly what the issue is (I've just now discovered it myself), but after switching from a Linksys WRT54GX2 to a thrift store Netgear, my shared libraries appeared instantly. My gut is telling me that the Linksys routers are blocking the multicast traffic, which is stupid on Linksys's part, to filter traffic internally. I'll look more into the Netgear and see what it has that the Linksys doesn't (or vice versa).

Error while opening pdf in reader in windows 8:Can't open this file. There's a problem with file format

I have a problem with a pdf file which does not open with reader in windows 8 but it opens properly with adobe pdf reader. All other pdf can be opened in reader.But when i open a pdf(see this link for pdf for which i got error http://incometaxsoft.com/temp/Form.pdf)
it gives error as "Can't open this file. There's a problem with file format".
The same file opens properly in adobe pdf reader.You can check the pdf file which i have mentioned in the link above.But the reader which comes with windows 8 can open some other pdf in the same PC.What may be the error causing this??

This has turned out to be an enormous issue for me as I sell PDF files as ebooks. I have done a fair amount of investigating this for my system.
My files have to be compatible not just across readers but across operating systems.
To date, I have over 200 PDFs that have functioned flawlessly across Mac, PC (Windows 7 and below), Android, iPhone/iPad, Linux.
I personally test my PDFs using a variety of readers and PDF editors including
PDF XChange (my favorite)
Foxit (runner up for me and I recommend for most people)
Adobe (the bloated monster)
Nitro 9 (great for moving graphical elements around)
ABBYY
And the Nuance PDF Create toolsets
Those are off the top of my head. There are a bunch on Android that I test with too.
I am running the Windows 10 Pro Tech Preview and I have this same problem so I know it isn't fixed yet in any kind of pre-release way (-sigh-)
Here is what I've learned for my situation
The PDFs I created using NUANCE'S PDF CREATE PROFESSIONAL VERSION 8
all fail using the built-in Windows 8/10 PDF reader.
When I look at the PDF properties for these Nuance created files, the underlying engine used to write them is called "ImageToPDF". Using ABBYY it indicates their own engine as does everyone else that I've tried. It is easy for you to check to see
what created your PDF by doing a "Control D" (look at the document properties). Perhaps there's a common engine causing issues.
If I use the exact same source files to create a PDF using any of my other tools I have no issues. I checked the PDF versions made by the tools and they are all set to 1.5.
A customer mentioned being able to convert them in a way they worked by saving them without having to do any kind of extraction, but I have not been able to duplicate that. Perhaps he did a "print" which seems like it could work.
In summary, the workaround everyone is talking about, using an alternate reader, of course works. But not everyone wants to change.
The culprit I have found is my Nuance PDF Creation tools that are using the ImageToPDF engine.
I hope it gets FIXED as I really don't want to have to regenerate all of my PDF files.

Problem with pdf-printing in Adobe Acrobat Pro

Hi,
I have Adobe Acrobat Pro 9.4.3.
PDF-printing has always worked great but suddenly there is some kind of problem.
After printing a excel-document from "Print to pdf" built-in function in MacOS OR Adobes Printer I have corruptet pdf-files when showing them in Adobe Reader/Acrobat, but the MacOS Preview-software shows them correct.
So, there cannot be any problem with the printing, but the local preview on my computer using Reader or Acrobat. I dont even use the Myriad font in the document, I use Verdana.

You say you're using Verdana but you're not. The error message clearly shows you're using MyriadPro Bold.
You probably recently installed the Mac OS X 10.6.7 update which has a bug with OpenType PostScript fonts like MyriadPro Bold. Either use Verdana or another TrueType or PostScript font, or revert to Mac OS X 10.6.6.
Read about the problem here: http://www.tidbits.com/article/12078

I have problems transferring files from PC to Mac and from Mac to Mac

I have problems transferring files from PC to Mac, and from Mac to Mac. PC to PC is fine. Nothing but problems with the Mac. One example:
While working on my PC, I open shared folders on an external HDD connected to the Mac. I click on paste to move the files. I get an error after a few seconds to a minute of trying to move several files from my PC Win 7 to Mac OS Maverick, that there is a file already at the destination on Mac. This statement is true, but it was just put there because I am copying them over in that same action. It reads 0Kb and wasn't there before I started. Then I get an error: The Action Cannot be completed because the folder is open in another program. Close the folder or file and try again..
Whether I click on it a bunch right of way or wait, it still takes about 45 seconds. I have to do it with every file and it only happens when copying from a PC to Mac. I have even restarted both computers so nothing is using any files. If I copy one file at a time, I don't get any error.
So I have one file to move, no problem. If move 5 files, The first will go fine, but it shows all 5 files in folder at once. All other files than the first show 0kb. I get the file already existing error once it starts the second file transfer, and I select move and replace. Then I get The Action Cannot be completed because the folder is open in another program. I wait or click repeatedly until it starts to move file. That file will then show something other than 0kb. When it is done, the error process starts all over. I tried checking the PC with unlocker, but the files do not show themselves locked on the PC.

Its not only French. Even certain characters in English will come across as gobblydegook from 1 platform to another. I see this in emails that likely were composed in Word & the characters don't come across.
Not sure if this is still true, but years ago someone explained that there is a standard character set & then I think its extended characters & those vary from platform to platform or language to language, etc.

Problems with file/print sharing between macs

Similar Messages

Maybe you are looking for