Problems with filling of Setup table for 2LIS_03_UM
I am not able to fill up this table. I mean its not getting filled thorugh TCode OLIZBW.
Setup table for 2LIS_03_BF is getting filled up though.
Can anyone foresee what can be the reason.
Thanks PB
Nope I am not. But the problem I have posted in my last note that i was getting -ve stock values which was resolved when i loaded the data with infosource 2LIS_03_UM in development. when I am testing it in QA I am not getting dat in this extractor.
I had a chat with MM Functional Consultant , he said I probably wont get this data.
Now I am not sure how will I be able to resolve the problem.
Regards
PB
Similar Messages
-
Problem while filling the Setup Table for the DS 2LIS_02_SCL.
Hi All,
When I am trying to fill the Setup table for the DataSource 2LIS_02_SCL and only for one specific Purchase Order, it is showing me a message like
u201CDataSource 2LIS_02_ITM contains data still to be transferredu201D
I have deleted the Setup Table and I want to delete the entries from SM13, but I do not have Authorization.
Also, here I am trying to fill the Setup Table for 2LIS_02_SCL and not for 2LIS_02_ITM, but the message displayed above is showing as 2LIS_02_ITM DataSource. I think the Setup Table will be same for both the DataSources.
Waiting for your valuable inputs.
Thanks in Advance.Hi,
When you want to fill the setup tables first you need to delete setup tables to avoid the duplicate entires in setup tables ( you can delete the setup tables by using t.code LBWG with application no is 02)
In your case, the data souce is 2LIS_02_SCL for purchasing.
when you want to delete the setup tables by using t.code LBWG with 02 application no it will delete all the purchasing related data from all the data sources like
2LIS_02_SCL
2LIS_02_ITM
Before the deletion of setup tables you need to clear the delta Queues and stop the V3 jobs, which loads the data to Delta Queues (RSA7) and Update tables(LBWQ).
you need to run the V3 jobs manually by using LBWE > Job control > and schedule the jobs until the delta queues will get 0 records. that means no data will be available in RSA7 and LBWQ
go to SM37 to see the jobs LIS-BW-VB_APPLICATION_02,
once the delta queues gets 0 records by running V3 Jobs manullay.
Then remove the released state jobs > remove from schedule means delete the jobs in LBWE > Go to job control > you can delete the released jobs.
Becuase No postings to be done in application tables, while running setuptable filling you should take some down time to fill the setup tables.( OLI*BW) *=Application number.
Once you clear the Queues and delete the v3 jobs, then you need to fill the setup tables after deletion of setup tables.
once you fill the setup tables , by running intialization to BW side the delta Queue is formed for the data source in R3 side
Now the postings can be done in R3 side, so you need schedule back the V3 jobs, which you already delted from LBWE to load the data from application tables to RSA7 or LBWQ.
I hope this may help yoou.
Regards.
Rambabu
Edited by: Rambabu velanati on Jun 9, 2010 4:41 PM
Edited by: Rambabu velanati on Jun 9, 2010 4:52 PM -
Extraction Problem- while filling the setup table
Hi all,
I have a problem when i fill the setup table for LO cockpit Extraction on any SD datasources (2_LIS_VAHDR,2lis_13_vdkon etc.,). i am done with LBWQ successfully. i also verified the datasources in RSA6. They are in active status in RSA7-delta queue.
After i submit the request to fill the setup table, i am getting
"datasource 2_LIS_VAHDR contains data still to be transferred". if i check the extract checker (RSA3) i am getting the error msg "data source is not defined in the source system"
Can anybody help me on this?
one of my friend suggested that it could be the reason that some jobs are in active status that loads/updates data into base tables which the datasources refers.
Any idea on the reason and resolutions?
Greatly appreciated !Hi Vijaya,
We too got the same Error : " the datasources are not defined in the source system".
This is source system connection problem. Check whether connection between R/3 and BW is active.
This error occurs when the connection is inactive.
Also, if it is copy client, then check data exists in other client. If so delete the setup tables data in that client as well.
This will resolve your issue.
Thanks
Edited by: Allen Fyne on Aug 9, 2008 6:47 PM -
Taking long time filling the setup tables for sales and shipment
Hi ,
I am trying to fill the setup tables for sales and shipment and it is taking lot of time .
It took 16 hours just to bring 6 months of sales history data in the test environment .
Cn anybody help on this issue why it is taking that much of time ...
I am trying to load the sales data from R/3 into APO-BW from 2005 to 2007 .......
It is taking 16 hours to fill the data for only 6 months .Hi,
1. delete data and refill the setuptables again by spliting to several small pieces.
2. compare the data. wht is the last Document numner in RSA3(Maximum one). Start from Maximum one. may be bit complex approch.
you need to check with PSA and base tables.
keep one thing in your mind you need to check againest MSEG and BSEG only. noy BKPF and MKPF.
correct if i'm wrong.
either refill or create a user exit to avoid duplicae records(you should have very good understanding of data, it will lead to inconsitent data for delta records).
User exit not a good solution. it's one possibility.
****Assign Points If Helpful****
Regards,
Ravikanth -
Error when running setup table for 2LIS_03_UM
Hi experts,
When running the setup table for 2LIS_03_UM, we got the error message "Plant FP01 does not exist." Any suggestions on how we can fix this?
Thanks,
Donnacheck if this plant has been maintained in source system or not. If not, ask the concerned team to maintain it.
Another way may be to allow error records which should ignore errornous records and rest should be filled in setup table.
Regards,
Gaurav -
Filling setup tables for 2lis_03_um
hi
i am trying to fill setup tables for um. its nott allowing me, i gave name of run and date and time .
its asking Archiving Run . i am trying to give or f4 its not allowing me?
please let me knowHi Suneel........
Check this thread by Roberto Negro......
Archive run.
Hope this helps.....
Regards,
Debjani..... -
Problem while filling the setup table
Hi experts,
i am extracting data from 2lis_12_vcitm, while filling the setup table it showing bellow error message,
NO EXTRACT STRUCTURE ACTIVATE OR NO BW CONNECTED
but i Extract structure is in active mode and BW connection also is there.
what is the problem,
please help me,
answer will be appreciated with full points,
regards,
venkatHi Venkata,
If u are looking for reinitialization to ur targets and which needs the refilling of setup tables then u need to perform the following activities.
Try to take the down time in R3 to stop the posting.
try to empty the queue(both the extraction and Delta queue in R3 and deeavtivate the V3 update) and then delte the data in ur targets in BW which are getting feeded from these Data sources and remove the init flag at the Infopackage level for the respective DS's.
And then check if there is any blocked records in SM13 for ur application.
Delete the existing set up for the application 12.
And then refill the setup tables (may be u can think of multiple setups to make this execution faster and to reduce the R3 load).
Once the setup is done.. then take init-without data transfer for ur DS's in BW and then activate the V3 in R3.Down time can be taken off here.
and then take repair full load(which carry all of ur Setup tables data to ur targets). Once the repair is done then u can look for the regular deltas...
For more information u can search SDN on the same..
thanks
Assign points if this helps -
Word VBA Macro problem with adding rows to table for BAPI call
Hello all,
I have code in Word macro which is reading file from the disk and converting it to binary. This binary should be inserted in the internal table (Dim As object) for further posting. Code is modified from the note 945682.
Here is the code:
Sub Read_File(FileNameFull As String)
Dim oBinaryDataTab As Object
Dim oBinaryDataRow As Object
Dim lBytesToRead As Long
Dim iNumChars, i As Integer
Dim s1022, s2044, sX As String
Dim fs, f, ts As Object
Dim ReadFile As String
' Actually does the work of uploading the document in 1022 byte pieces.
ReadFile = 0
Set fs = CreateObject("Scripting.FileSystemObject")
Set f = fs.GetFile(FileNameFull)
Set ts = f.OpenAsTextStream(1, -2)
lBytesToRead = f.Size
ReadFile = f.Size
Do While ts.AtEndOfStream <> True
If lBytesToRead < 1022 Then
iNumChars = lBytesToRead
Else
iNumChars = 1022
End If
s1022 = ts.Read(iNumChars)
s2044 = ""
For i = 1 To Len(s1022)
sX = Hex$(CByte(Asc(Mid(s1022, i, 1))))
If Len(sX) = 1 Then
sX = "0" + sX
End If
s2044 = s2044 + sX
Next i
Set oBinaryDataRow = oBinaryDataTab.Rows.Add
oBinaryDataRow("LINE") = s2044
lBytesToRead = lBytesToRead - iNumChars
Loop
End Sub
But on the row "Set oBinaryDataRow = oBinaryDataTab.Rows.Add" code just stopped to work.
Can somebody give me a hint how to proceed?
I also tried to Dim oBinaryDataTable As Table and oBinaryDataRow as Row with the same result.
oBinaryDataTable will be used as to post file to SAP system without GUI FTP connection. Because of that it must be converted to binary form.
TIA
Gordan
P.S. Message to Moderator: Please, be so kind, and put the message in the proper forum if this is not this one.Self Resloved
-
Problems with windows-installer (setup.exe) for 11.2 beta
windows-installer for XE 11.2 beta appearently FIRST checks the space available on drive C:.
As the installer prevents installation, insiting that there is not enough space (1500Mb) to install oracle-XE, there's nothing but the chance to provided sufficient space on drive C:, no matter to which drive you are determined to install XE to...
wouldn't it be nice to fix that?
best regards,
norbertHello Norbert,
there are several objects that will reside on your system drive, perhaps you also have temp on C:\, so I guess you'll actually need space there no matter which drive you chose as target for the (main part of the) installation.
Note that a similar issue has been discussed here: {thread:id=2201310}
-Udo -
Can you help with Tcode to fill this SETUP table? not working for me.
Hi,
For the datasource 2LIS_11_VASCL (SD Sales: Schedule Line Item), I need to fill the Setup Tables via OLI*BW
I understand the * to be the application number, which in this case it is 11 but I get a message that OLI11BW does not exist.
1. Can you help me with the tcode to fill the setup table for 2LIS_11_VASCL?
2. Since there are several datasources with the same application number 11, how do I fill only 2LIS_11_VASCL without filling the others:
2LIS_11_VAHDR Sales Document Header Data
2LIS_11_VAITM Sales Document Item Data
2LIS_11_VAKON Sales Document Condition
2LIS_11_VASCL Sales Document Schedule Line
2LIS_11_VASTH Sales Document Header Status
2LIS_11_VASTI Sales Document Item Status
2LIS_11_V_ITM Sales-Shipping Allocation Item Data
2LIS_11_V_SCL Sales-Shipping Allocation Schedule Line
2LIS_11_V_SSL Sales Document Order Delivery
ThanksOk,
I tried that and it basically bring you to OLI7BW as suggested above.
1. At this point, how do you know which of these it is actually filling:
2LIS_11_VAHDR Sales Document Header Data
2LIS_11_VAITM Sales Document Item Data
2LIS_11_VAKON Sales Document Condition
2LIS_11_VASCL Sales Document Schedule Line
2LIS_11_VASTH Sales Document Header Status
2LIS_11_VASTI Sales Document Item Status
2LIS_11_V_ITM Sales-Shipping Allocation Item Data
2LIS_11_V_SCL Sales-Shipping Allocation Schedule Line
2LIS_11_V_SSL Sales Document Order Delivery
2. Also, what does it mean when after running OLI7BW wide, with no restriction on my system, still rsa3 shows no records for 2LIS_11_V_SCL?
Any other way to confirm that there may not be any data in 2LIS_11_V_SCL?
Or any way, to make an entry which reflect in 2LIS_11_V_SCL so that I can verify if OLI7BW actually fills the setup table?
Thanks -
Error while filling setup table for 2LIS_03_BF
Hello,
I am getting an error while filling set-up table for 2LIS_03_BF.
Following is the screenshot of the same.
If I check in ST22, I get following,
I could fill the setup table for other datasource 2LIS_03_BX without any problem.
Please suggest.Hi,
Can you try filling the setup table data for that range in background?
Sometimes because of huge data that you are trying to fill it might through you a dump. So please execute it in background and see if it works?.
But still can't really say what that dump tells from what you attached.
Thanks,
Sathya -
How to Fill Setup tables for MAP (IS- Retail)
Hello,
I am working on MAP scenario, I found the following data sources as a part of it. Can anybody please tell me how to fill the setup tables for these and what are the base tables for it??
2LIS_40_REVAL
2LIS_40_S202
2LIS_40_S207
2LIS_40_S208
Your reply is highly appreciated.
Regards,
NareshHi Naresh,
We cannot fill setup tables for each data source.
ORISBW -- This is the t-code to fill the setup tables for all the data sources which are related to application component 40.
If you want setup tables names of your data sources please check below.
2LIS_40_REVAL --- MC40RP0REVSETUP.
Comes to your second post.
2LIS_40_S202
2LIS_40_S207
2LIS_40_S208 these are LIS data sources, whic are replaced with LO data sources in SAP BI 7.0
If you are using LO data sources then no need to use LIS data sources.
Regards,
Venkatesh -
Ways to reduce downtime for filling up setup table
Hi Experts,
Can anyone tell me the step by step process so that i can reduce downtime for filling up setup tables?
I know that setup tables can be filled by considering sales document numbers....but the further steps are not clear with me...........specially with data loadin till PSA and then to ODS/Cube
So plz throw some light on this.......
Regards,
Vaishnavi.Hi,
You will need to fill the set up tables in 'no postings period'. In other words when no trasnactions are posted for that area in R/3 otherwise those records will not come to BW. Discuss this with end user and decide. Weekends are a general choice for this activity.
You can run them after business hours so that there wont be any transactions, or in the night times or you can do it on week ends so that there is no need to take down time.
Fill the setup tables with already closed values and then fill up again with open values.This will reduce the down time.
Initialize closed periods first in which users wont enter data ( for example in 2007 or 2006), this initializations can be done while users are working. Then the initialize last period at night/weekends.holidays etc.
If you know documents that are in closed periods, and you are sure that these documents can no longer be changed, you can only fill the SetUp tables for these documents or only for these periods, by continuing to post in open periods. You then initialize only for these intervals, delete the setup table, and only then do you fill the setup table with the rest of the documents this procedure can drastically reduce the downtimes of your system.
However, there is a risk that user exits (and in LIS, formulas and conditions) can be used to retrieve documents that are in periods that are already "closed periods".
One more thing what you need to bear in mind is, to check if there are any Scheduled jobs which are updating the transaction tables, which would definitely cause Data Reconciliation Issues.
Try Early Delta Initialization
With early delta initialization, you have the option of writing the data into the delta queue or into the delta tables for the application during the initialization request in the source system. This means that you are able to execute the initialization of the delta process (the init request), without having to stop the posting of data in the source system. The option of executing an early delta initialization is only available if the DataSource extractor called in the source system with this data request supports this.
Extractors that support early delta initialization are delivered with Plug-Ins as of Plug-In (-A) 2002.1.
You cannot run an initialization simulation together with an early delta initialization.
Hope this link may make you clear about Early Delta Initialization
http://help.sap.com/saphelp_nw04s/helpdata/en/80/1a65dce07211d2acb80000e829fbfe/frameset.htm
http://www.allinterview.com/showanswers/2907.html
http://sap.ittoolbox.com/groups/technical-functional/sap-bw/early-delta-initialization-459379
http://books.google.co.in/books?id=qYtz7kEHegEC&pg=PA293&lpg=PA293&dq=early+delta&source=web&ots=AM1PtX6wcZ&sig=xKOF85Gb8UtszY44zt06K6R0n3M&hl=en#PPA290,M1
http://www.blackwellpublishing.com/journal.asp?ref=1069-6563&site=1
EARLY DELTA
Early delta Initialization
How To Minimize Downtime For Delta Initialization
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/5d51aa90-0201-0010-749e-d6b993c7a0d6
How To Minimize Effects of Planned Downtime (NW7.0)
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/901c5703-f197-2910-e290-a2851d1bf3bb
Note 753654 - How can downtime be reduced for setup table update
602260 - Procedure for reconstructing data for BW
437672 - LBWE: Performance for setup of extract structures
436393 - Performance improvement for filling the setup tables
Note 739863
/thread/756626 [original link is broken]
Re: How to Setup and INIT from 2LIS_13_VDITM with millions of records
How downtime can be reduced for setup table update.
Fill setup tables without locking users
Initialization Setup Tables.
Hope this helps.
Thanks,
JituK -
Tcode to fill setup tables for application 0CS( Customer Service)
Dear Experts,
i have to fill the setup tables for the datasource 2LIS_18_I0TASK.
the datasource comes under the appilcation 0CS( Customer Service).
when i am trying to fill the setup tables through the tcode SBIW i am not able to find the respective appilcation.
Could you please let me know the transaction to fulfill the same.
Regards,
Sunil...Hi SunilKumar Bolle,
For filling setup tables for 0CS Data Sources Use the T-Code- OLISBW, or use the path SBIW->Settings for Application-Specific DataSources (PI)->Logistics->Managing Extract Structures->Initialization->Filling in the Setup Table->Application-Specific Setup of Statistical Data->Service Management - Perform Setup
The only way to say thanks in SDN is to assign Points. -
Error in Setup Tables for QM Inspection Lots
Hi,
I have an issue when I attempt to fill the setup tables for QM that I receive the following error for the Inspection Lots (QV) only. When I fill the setup tables for Notifications and Inspection Results, then these are OK and use the same standard function module 'qmex_inspection_lot_import_ini'.
"Internal error in program SAPLQMEX, function module / subroutine qmex_inspection_lot_import_ini, code 1".
Has anyone any ideas of the cause or have you experienced this before?
Thanks,
ScottHi,
The most likely reason that leads to the above error message in your
system is an inconsistency of the inspection lots.
To get the inconsistent inspection lot,please check your system in the
following way:
- transaction OLIQBW for running Setup table
- switch on debugging mode
- set break point in the function QMEX_INSPECTION_LOT_IMPORT_INI
on the line:
ELSE.
MESSAGE e011(qmex) WITH sy-repid
'qmex_inspection_lot_import_ini'
'1'.
> then excecute F8 to go to this break point.
- double klick on ' l_qals-prueflos'
on line 77 in the same function QMEX_INSPECTION_LOT_IMPORT_INI:
READ TABLE qave_tab INTO l_qave
WITH KEY prueflos = l_qals-prueflos < here !
BINARY SEARCH.
Please check following note:
305244 Missing operations for the inspection lot
89541 Inspection lot exists w/o status object: EM BS001
536769 Inspection lots without status object
Thanks,
Venkat
Maybe you are looking for
-
How to Install oracle 11G Solaris 10 NO GUI using command line
Hello I need to install oracle 11G R2 on Solaris 10 but cant use interactive mode i tried the following /runInstaller -silent -force -debug FROM_LOCATION="/var/tmp/oracle/database/stageproducts.xml" ORACLE_HOME="/oracle/product" As per oracle metalin
-
Removing Photo Album, or the photos therein
Hello, I've synced some photos using iTunes from a folder, it worked OK until I noticed that portrait/paysage was not handled correctly, but this is another issue. So on the Mac I moved the photos to subfolders, and re-synced. Of course I expected th
-
How do I select photos in iphoto?
I want to select specific pictures to import to iphoto from my sd card. However my only option is only pressing shift to select multiple pictures but there are ones that I dont want to import.
-
JDK 8u40 Early Access Release - Build b12 - java.util.MissingResourceException
Hi guys, we are developing a Java Web Start application which uses SOAP services and we get the following exception if we try to start our application with the current JDK 8u40 Early Access Release. java.lang.ExceptionInInitializerError at sun.refl
-
I have a third generation iipad and a 2nd generation iPad.Both wifi only.I cannot get these two machines to sync spreadsheets to each other using the numbers application and iCloud .What am I doing wrong?