Problems with find my ipad

I just upgraded my OS to 5.1 and setup up my icloud account (including turning de FindmyIpod ON).  However when opening my FindMyIpad App my Ipad2 does not appear as one of my devices. Any pointers on why this might occur?  My Iphone4 is recognized so it must be something in my Ipad.

Hi, is your iPad connected to your Wi-Fi network?
I would Reboot all your Apple products & your Modem/Router..
On your iPad -> Settings -> iCloud -> on the right hand side of the screen lower down on the List -> Find My iPad
ensure it is Turned On...Good Luck..

Similar Messages

  • TS1398 I have 2 ipads 1st  ipad 2G and ipad 3G whats the problem with the 3G ipad the wifi is now getting connected to the wifi modem and the ipad 2G is getting connected no problem with the 2G ipad what should i do...?????  And i had checked with my rout

    I have 2 ipads 1st  ipad 2G and ipad 3G whats the problem with the 3G ipad the wifi is now getting connected to the wifi modem and the ipad 2G is getting connected no problem with the 2G ipad what should i do...?????  And I had checked with my iball baton router with the iball sevice provider.

    Hi there Paula120,
    You may find the troubleshooting steps in the article below helpful.
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/ts1538
    -Griff W. 

  • Problems with the new iPad and Joikuspot premium after iOS 6

    Hi,
    I'm experiencing serious problems with my new iPad after last iOS update. Usually I was connecting to the internet through Joikuspot premium on Nokia mobile phone (E6). I was able to do everything, https sites surfing, absolutely everything with no exceptions.
    Now, after iOS 6 update, I can't connect to https sites, google+, sync calendar etc.
    I've tried to change connection criteria on joikuspot but nothing. The fact is also that other devices as laptop or other smartphones are still working perfectly, in any case, sharing the wi-fi connection created by joikuspot.
    Finally the problem is 100% due to the iPad and the new iOS.
    disappointing, amateur for such a device... (iPad I mean).
    Any help?
    Many many thanks
    Vittorio

    Ho lo stesso problema, dopo l'aggiornamento a IOS 6 l'ipad non riconosce più il mio nokia N8. Con IOS 5 andava una cannonata...
    vorrei ritornare a IOS 5

  • Hy, I have a problem with a new iPad Mini.

    Hy, I have a problem with a new iPad Mini.
    When I try to use the cameras, it doesn't work.
    I get to take 3-4 pictures and after that all I see is the shutter.
    It happends even if just start the camera app, or the facetime app, after 4-5s.
    I've reinstalled IOS 6.1 but nothing changed.
    It is a new ipad. What can I do?

    Ok, Orange Romania changed my iPad mini but now I have another problem.
    I bought the iPad mini on 01/feb/2013, took it to service on 06/feb/2013, and got another ipad mini on 12/feb/2013.
    But the new ipad mini keeps requesting the password for some user [email protected], and it does it from the first day of activation. This is suspect for me, so I checked it's serial with selfsolve.apple.com and it shows "Estimated Expiration Date: January 31, 2014" and since it has one year free service I am worried the iPad mini wasn't new.
    Please help.

  • I am having problems with my new ipad that i got for Christmas today, i don't get free wi-fi at my home and it said if the wi-fi is not available, connect to itunes. i have done that and it didnt help me. mind helping me out?

    i am having problems with my new ipad that i got for Christmas today, i don't get free wi-fi at my home and it said if the wi-fi is not available, connect to itunes. i have done that and it didnt help me. mind helping me out?

    Further info - I changed my security settings to allow apps from anywhere, and again tried to install.  I again got an error message
    that the update failed to install, and to contact Customer Support.

  • Problem with finding a File

    Hi:
    I am having problem with finding a file on the OS
    (using Win2000) when given an absolute pathname;
    here is the rough code:
    //theFile is specified at command line
    File f = new File(theFile);
    BufferedReader in = new BufferedReader(new FileReader(f));When I run the program, I type
    java myProgram C:\aFolder\theFile
    But it can't find theFile. I am not sure what's wrong.
    Thanx

    No that can't be it; he takes the filename from the command line, so escaping isn't an issue (unless he used a shell that unescaped '\\' for him, but I think he's using the win2000 cmd shell).
    Dunno, I have no idea of your filesystem or shell. Just do some debugging, around the lines of:
    File f = new File(theFile);
    if (f.exists()) {
      System.err.println(theFile + " exists.");
    } else {
      System.err.println(theFile + " doesn't exist.");
    }

  • I have a problem with my new ipad air 64g with cellular. When I off my ipad for a long period of time ( around 2 hours), my ipad air freeze. Nothing is showing on screen with any button except by pressing reboot (home   on/off button)

    I have a problem with my new ipad air 64g with cellular. When I off my ipad for a long period of time ( around 2 hours), my ipad air freeze. Nothing is showing on screen with any button except by pressing reboot (home   on/off button). Anyone out there can help. Thanks.

    I have a 64GB iPad Air WiFi+Cellular (Verizon), and I don't see the issues you are describing.  First I would suggest that you update your iPad to the newest iOS update.  If that doesn't help, then you may want to schedule an appointment at an Apple Genius Bar.  If you go this route, I suggest that you let the iPad sleep for long enough for the problem to arise before you go to your appointment.

  • HT201365 Hello Apple, I'm having a problem with activating my iPad 4. I created iCloud account which differs from Apple account but I now forget my iCloud password. How can settle it ? Thank you so much

    Hello Apple, I'm having a problem with activating my iPad 4. I created iCloud account which differs from Apple account but I now forget my iCloud password. How can settle it ? Thank you so much.
    Lydang
    <E-mails Edited by Host>

    Hello Apple, I'm having a problem with activating my iPad 4. I created iCloud account which differs from Apple account but I now forget my iCloud password. How can settle it ? Thank you so much.
    Lydang
    <E-mails Edited by Host>

  • Is anyone having a problem with the new iPad (Gen. 3) not staying connected to the charger? It seems to ALWAYS get jiggled loose and no longer be charging. My iPad 1 has no issue but I can't browse Internet w/o new iPad unplugging. Horrible!

    I notice that my new IPad (3rd generation) will not stay connected to the power cord at all, I'm not exagerating, if I plug it in and browse the Internet without fail it will become unplugged and I will have to push the plug back in (Ba-beep). Ive actually grown to despise that sound when you plug your iPhone or iPad in because it reminds me of how much money I spent on something that PHYSICALLY will not charge while I'm using it.
    I know the problem with it holding a charge while in use, I get it, the screen is amazing and it takes a lot to run the display, however, it is unacceptable to me that I can't even keep the thing plugged in while I'm using it. I can not even leave it on my Cal King bed overnight because I will wake up in the morning to find that the plug has been jiggled loose in a corner, so it's still attached but not making a connection thus not being charged. 
    I love the 4GLTE from Verizon and I love the iPad, but I'm actually using my 1st generation IPad while I am at home so I can leave my new $900 iPad on a table to charge free of incident so I can use the 4G while I'm away from wifi during the day. I have been getting more upset about this because I can not even use the Griffin extended cord to charge the iPad and be far from the plug because only the original apple sync/charge cord will have a better shot at staying in. Absolutely none of my non apple cables will stay in the iPad 3 while having it in my hands.
    The plug is at an angle, unlike the first iPad, not sure about the iPad 2. Please let me know if they have same issue.
    If anyone else is having this problem with the Gen 3 iPad please let me know because I'm tempted to do something about it with apple and I'm hoping that I just for some reason have a bad cable receiver or something and maybe I can get a replacement and enjoy the iPad as I had expected to. There is no reason why I should be even using my first iPad and I have friends that want to buy it but I am not selling it because I'm unable to sell it because I can't handle the new iPad while it's plugged in, that is ridiculous if it's a common issue so please let me know!

    Thanks for the swift reply, I have been looking online and a loose plug seems to be somewhat of an issue with many, I hope mine is actually a problem and not what others are experiencing. It's taken me this long to even reach out for the simple fact I HATE being a complainer but this is just horrible.
    Do you have an iPad 3 as well? And is yours not experiencing any issues close to mine?
    Thanks again!

  • Problem with Finder and Menu Fonts (uppercase A)

    Hello --
    I'm having a problem with fonts. All the characters that appear under icons in the Finder or in the menu for any application appear as uppercase As with boxes around them. There appears to be one uppercase A for each character that should be there. If I click-pause-click to edit the filename in the Finder, the text appears normal during the duration of the change, and then reverts to uppercase A with a box around it again. All other operation of the computer is normal.
    I was watching and downloading video files in iTunes when the problem appeared. When I pressed ESC to exit full-screen mode, the Finder said that my start-up disk was almost full, and I saw the font problem. Upon investigating, I discovered that my start-up disk was completely full (and the download had failed), so the first thing I did was move some video files to an external drive, which freed about 5 GB.
    Since freeing the space, I've tried the following to fix it, in this order:
    1. booted from Tiger CD to run Repair Disk from Disk Utility
    2. rebooted from the boot hard drive to run Repair Disk Permissions from Disk Utility
    3. run through Disk Warrior
    4. created a test admin user and logged in as that user
    5. removed font cache files using terminal
    6. booted in safe mode, logged in as myself, and then rebooted normally
    None of these actions has had any effect. The computer is still operating normally, except for the characters that don't display correctly.
    I'm running 10.4.6 on a Titanium Powerbook 500 MHz with 512MB RAM. A few months ago, I replaced the internal hard drive with an 80GB Seagate.
    Tibook 500   Mac OS X (10.4.6)  

    Hi again, zoobieboots —
    I appreciate your initiating a new thread. Your post here helps to make the situation much clearer than in bmewolf's thread — particularly in terms of what you've already tried. Thanks again.
    A few initial thoughts —
        (a) As I was trying to suggest previously, you're apparently operating (after moving some files to an external drive) with ~6-10% (?) free disk space. Particularly given that you were working with large video files when this appeared, File fragmentation would be expected. While I haven't heard of this particular symptom resulting from fragmentation, that would be a concern to me — particularly since this immediately preceded the problematic behavior.
    I've read some good reports about iDefrag, but haven't used it myself. A demo version is apparently available for HDs < 100GB. But you'd presumably need to free significantly more space first (you haven't actually said whether 5GB or ?? is the total available now). Having never experienced severe fragmentation, I don't fully understand its consequences — but another participant may be able to explain this.
        <b>(b) You don't mention trying to troubleshoot potentially corrupt or incompatible fonts (or font caches), also as outlined in the other thread. As I suggested there, The X Lab's "undoing Font Book" FAQ is a useful resource in this.
        (c) Although I agree it may be an unsatisfying "solution," an Archive & Install did work for bmewolf in the case that you've indicated matches yours closely.
    I hope one of these suggestions is helpful. Please post back to discuss your progress.
    Regards,
    Dean

  • Problem with iPhone and iPad keyboard shortcuts

    When I try to access the keyboard shortcuts in either my iPhone 6+, iPad 3 or iPad Air, the sequence Settings>General>Keyboard>Shortcuts causes the devices to go back to the Home Screen.  I spent several hours in a chat with Apple Support, had to go through an iTunes back up on the iPhone and restored it to "new phone" and it fixed the problem on the iPhone, but not on the iPads.  Chatted again today with Support, tried hard reset (press both buttons till Apple logo appears) on the iPad 3 and I could access the shortcuts.  Did the same on the iPad Air with no luck.
    Now, one hour after second Support chat,  none of the devices can access the shortcuts.  There must be a problem with iCloud for this to be happening on all 3 devices.
    Does anyone have any ideas?

    Same problem also and if I restore both the iPhone and iPad as new I
    lose a lot of progress in my games.

  • Problem with newsstand  for ipad

    Hi there, I have been having a small problem with newsstand on my ipad.
    I have a free copy of Jamie Oliver's magazine on there, which is fine.
    However, now all I can view is this copy. I want to browse the shop for other copies of the magazine, or for a subscription option, but can't do this.
    I had this browsing option before I downloaded the free copy, but now can't browse anywhere. I've gone back to the store, but can't do it in there either... it just seems to offer me the chance to re-open the app.
    I can't work out how to browse the issues of Jamie's magazine.
    Has it glitched, or am I being a noob?

    Rodrigo, I had the same problem, I think what causes it is the spanish keyboard. I asume you are using it. Unfortunately what I had to do to fix was perform a full restore. the problem is that the issue will return if you enable the spanish keyboard again. I hope this helps you.

  • Problem with "find" mode in adf/swing application

    Hi all,
    I'm working on ADF Swing application which uses MS SQL Server 2005 (JDeveloper 10g 10.1.3)
    I think that my issue might be well-known…sorry if it has been already discussed somewhere else…
    I have a problem with the “find” mode for a detail panel in a master-detail form…(To make it clear the “find” mode is switched on when clicking on the special button on a navigation panel).
    So this mode works well in a master panel, but it demonstrates strange behavior on a detail panel, i.e. it takes me two attempts to find the necessary child object and it doesn’t switch back in a simple way from this mode to the normal mode….say if we are in the department 10 (Dept is a master form) we can’t simply find KING employee (Emp is a detail form)…is there any workaround for this?
    Thanks in advance. Alex.

    Hi Frank, please look this issue

  • How do I know if I have a wifi problem with my new iPad 3 (it seems very slow) and how does one address the problem with apple if there is one?

    I just read about the possible issue that some folks are having with their new iPad wifi (my seemed to be running very slowly but I thought that perhaps it was just me overreacting).  How do I know if I have a definite problem, and what is my recourse?  Do I need to take it to an Apple store for testing?  I have apple care which I assume addresses stuff like this.  Thoughts?  Thx so much.

    Your iPad is covered by the normal warranty for one year. If you have AppleCare that extends the coverage. If you feel there is a problem with your wifi reception visit an Apple store with your iPad for a consultation. Be sure to make an appointment before you go.

  • Multiple problems with touchscreen on iPad Air

    I bought an iPad Air right when it came out last year, and it has started to give me problems with the touchscreen. These problems don't happen all the time, just enough to be annoying - but not enough that I can discern any pattern. So I can't figure out why this might be happening. I know that if I take it to the Apple Store to show them, everything will work perfectly - like when you take your car to the mechanic and it won't make that weird sound.
    So I videoed some of them. There are four specific problems.
    First, sometimes I can't slide to get to my passcode screen (apologies for the cardinal sin of a vertical video - half the time when I go for my phone and start filming the problem it own't do it again, so I hurried): http://youtu.be/LvFH6intO_8
    Next, when using the keyboard, sometimes pressing one key (like Shift or Delete) will cause other keys to depress: http://youtu.be/HzqYSXJkP_s
    Today, I couldn't get the multi-touch gesture -- the one to close the app and return to the home screen -- to work: http://youtu.be/bPmku7XEE2I
    I've also had problems when trying to change the screen brightness. Note that the AirDrop menu keeps popping up, even though I'm only touching the brightness slider: http://youtu.be/7jBszQJQjpE
    I've tried resetting the iPad, cleaning the screen, ensuring my hands are clean, etc. Nothing seems to work, but after a while it'll just go back to normal operation (you can see that in the second video, I press the Home button and reopen Twitter and after that the multi-touch gesture works).
    Anyone else having this problem?

    If the Reset doesn't work, try a Restore.  Note that it's nowhere near as quick as a Reset.  It could take well over an hour!  Connect via cable to the computer that you use for sync.  From iTunes, select the iPad/iPod and then select the Summary tab.  Follow the on-screen directions for Restore and be sure to say "yes" to the backup.  You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod.  Again, say "yes."
    At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod.  As before, say "yes."  Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time.  If that happens, only the apps that are part of the IOS will appear on your device.  Corrective action is simple -  choose manual "Sync" from the bottom right of iTunes.
    If you're unable to do the Restore, go into Recovery Mode per the instructions here.  Also, if you have IOS-7, read this.

Maybe you are looking for

  • How do I connect my Airport Extreme to my modem (Cisco Model DPC3010)?

    I am having trouble connecting my Airport Extreme Wireless Base Station to a Cisco Modem (Model DPC3010).  I have used the Airport Extreme for years with other modems with no trouble.  Alas, this time around I can't get it to work.  I think I might n

  • Delete the records in a table from forms

    Oracle forms6i Hai All I am using forms6i and my need is i have generated a forms and the output is viewed through tables and i need to to delete all the records in the table from my forms while executing next time pls tell me Regards Srikkanth.M

  • Problem with powersaving stuff in rc.local

    Hi, I have a strange problem with the entries in my rc.local which are relevant for powersaving. First the file, which looks like this: #!/bin/bash # /etc/rc.local: Local multi-user startup script. #avoid hdd spindown for longer life :) hdparm -B 254

  • Issue in Production Support Due to FLAT-FILE

    Hi friends, Good morning to every one!!!        I got an issue from end user..        He was having an issue for a particular reoprt that his report values are not matched for R/3 values it seems...       In his report selection,  the selections are.

  • Can I rename my library with Finder without problems?

    I just realised that my library still has the name I gave it when I was trialing the software. Can I rename this in finder or Aperture simply and without any issues or large exercises emerging?