Problems with "find nearby missing photos", not working like it should in LR4

After I imported photos into LR4 I decided to split the event within the same folder creating 2 subfolders and proceeded to move the files within the finder. Went to LR4 and synchronized the folder but it didn't fix the file location on the missing files. So I tried finding individual files and checked the "Find nearby missing photos" but this doesn't seem to work like it did in LR3, because it won't find any nearby missing files even though they are right there new to each other in the same folder.
I don't want to dremove them and re-import because I have added ratings and I fear I would loose this info if I did that...

Your assumption that you would loose your ratings and develop settings is correct, if you would re-import.
Reimporting is never a good idea.
For the rest you have two alternatives: either you reconnect one image after another, or you undo on OS level what you did in the first place, then execute the move inside LR.
Depending on how many images you moved this could actually be the fastest route out.
"Find nearby missing photos" did not work reliably for me either in LR3. I have never found out when it did and when not, so I have preferred to learn how to perform any such operation inside LR.
Another valid question is why you do not use collections for your desired split , and leave the folders as they were.
According to my prejudice MAC users would not be as conservative in sticking to folder structures as Windows users..;-))
Once you master LR folders could be very unimportant storage buckets, as every angle for organizing your images would be covered by (smart) collections and keywords and other metadata.
Good luck, Cornelia

Similar Messages

HT1222 hello i have a problem with my fingerprint id its not working anymore like before his not recognised my finger anymore why ?

hello i have a problem with my fingerprint id its not working anymore like before his not recognised my finger anymore why ?

I have had to periodically delete and re-enter my fingerprint. The last update (7.1) may have improved that. You can delete by going to Settings > Touch ID & Passcode, enter your passcode and then tap "Turn Passcode Off" and then go back to the same area, put a passcode back on and then a fingerprint.

Siri is not working like it should i ask it to play songs and it just says sorry i cant do that any ideas y

siri is not working like it should i asked it to play songs and it just says sorry i cant do it any ideas y

Debbie:
deborahfromwindsor wrote:
he advises restarting by inserting the OSX disc and pressing down the C button to reboot from there then selecting disk utility, hard disk and repair.... Does he mean me to hold down the C key on the alpha keyboard or the ctrl key?
Should I just ask for my money back??? If it is a simple repair do I just literally push the disc in, push the power button and hold down the C button?
That's where I would begin, too, with
Repair Disk
Insert Installer disk and Restart, holding down the "C" key until grey Apple appears.
Go to Installer menu (Panther and earlier) or Utilities menu (Tiger) and launch Disk Utility.
Select your HDD (manufacturer ID) in the left panel.
Select First Aid in the Main panel.
(Check S.M.A.R.TStatus of HDD at the bottom of right panel, and report if it saysanything but Verified)
Click Repair Disk on the bottom right.
If DU reports disk does not need repairs quit DU and restart.
If DU reports errors Repair again and again until DU reports disk is repaired.
If DU reports errors it cannot repair you will need touse autility like TechTool Pro,Drive Geniusor DiskWarrior
First we need to determine if the issue you are experiencing with the computer is software or hardware based. Once we have gotten things sorted out there should be time enough to make you decision about keeping or returning it.
cornelius

My passbook on my iphone 5 works the same as it did for the iphone 4, its not working like it should. why?

my pass book on my iphone 5 does not work like it should, it works just the same as it did on the iphone 4, i tryed the date an time trick like 5 times an still nothing. i tryed factory reset an nothing. i know it workds different on the iphone 5 then the 4. but i dont know what else to do.

Can you be more specific about what isn't working? Are you running iOS 6 or iOS 6.1?
Did you read the support page on Passbook? http://support.apple.com/kb/HT5483

A problem with a timer event sometimes not working

Guys...
I have this problem:
I have a child added to the stage eacg 5 seconds and if this child still on the stage after another 5 seconds, you go to the next frame...
My problem is that sometimes it does not work, meaning that you can have this child on the stage for ever and nothing will happen... but sometimes it does work properlly...
Is there any mistakes in my code or what should I do?
var miC4:Loader = new Loader();
miC4.load(new URLRequest("nivel1.jpg"));
addChild(background1);
background1.addChild(miC4);
if (!lives){var lives:int = 3;}
var enem1:Loader = new Loader();
enem1.load(new URLRequest("1enemigo.png"));
var enemy1Array:Array = new Array(enem1);
var t1:Timer=new Timer(5000,1);
var t2:Timer=new Timer(10500,1);
recycleEnemy();
function removeEnemy(){
           background1.removeChild(enem1);
           recycleEnemy();
function touchListener(event:MouseEvent){
    enem1.removeEventListener(MouseEvent.CLICK, touchListener);
    removeEnemy();
function recycleEnemy():void{
        enem1.x=(50 + Math.random() * (stage.stageWidth - 150));
        enem1.y=(50 + Math.random() * (stage.stageHeight + -100));
        t1.addEventListener(TimerEvent.TIMER, addEnemy);
        t1.start();
        t2.addEventListener(TimerEvent.TIMER, bang1);
        t2.start();
function addEnemy(e:TimerEvent):void {
        background1.addChild(enem1);
        enem1.addEventListener(MouseEvent.CLICK, touchListener);
        enemy1Array.push(enem1);
function bang1(e:TimerEvent):void {
    if(enem1.stage){
                lives--;
                if (lives >= 0) {
                    t1.stop();
                    t2.stop();
                    removeChild(background1);
                    gotoAndStop(5);
Thanks a lot!!!!

ok, so there are a number of issues.
the first error is enemy1Array contains two duplicate objects ~5 seconds after entering that frame. i'm not sure if that's a problem because i don't see where you're even using enemy1Array, but you should fix that error (if enemy1Array is used) or remove enemy1Array (if it's not used).
the next problem is you can call recycleEnemy more than once and re-add those timers. flash will probably protect yourself from the bad coding but you shouldn't count on it. when you call removeEnemy you should stop those timers and remove those listeners before re-adding another pair of listeners. or just reset the timers in removeEnemy and start them in recycleEnemy. there's no need to re-add those listeners more than once. they could be added in your if(!lives) conditional.
the next (and probably most important) error is your removeChild(background1) statement which fails to remove enem1. so, when you re-enter that frame you have an enem1 on-stage that you can't kill and can't even reference. remove it when you remove the background1.

ITunes Wi-fi sync not working like it should.

So I got a new ipod touch 4th generation because my other one broke. I'm trying to set up wifi sync so I don't have to connect the device to the computer incase it malfunctions. Half the time it doesn't work, and if it does work, I still have to connect it directly to the computer. Sometimes I use wifi sync the first time and it doesn't work, then I plug it into my computer and it detects it. Then I unplug it and use wifi sync and it works like it should. So it kind of defeats the purpose of using wifi sync if everytime I want to sync content through wifi, I'm forced to connect the ipod to the computer. Is there something I'm doing wrong? Please Help!
Also, my Ipod is not even a month old and is working like new. It is refurbished.

Have you looked here:
iTunes 10.5 and later: Troubleshooting iTunes Wi-Fi Syncing

Problem with TableModelListener - it's just not working

Hi all - I have a TableModelListener like the one bellow but when I edit data in the table and press enter nothing happens - I'm guessing I'm doing something wrong but I can't work out what - has anyone got any ideas?
teamManageTable.getModel().addTableModelListener( new TableModelListener() {
            public void tableChanged(TableModelEvent e) {
                int row = e.getFirstRow();
                int column = e.getColumn();
                TableModel model = (TableModel)e.getSource();
                String columnName = model.getColumnName(column);
                Object data = model.getValueAt(row, column);
                // Do something with the data...
                System.out.println("hi");
        });Thanks

Hi there - it took me a while to replicate the problem (I'm not going to post the whole program - too big) - basically it seems that it is only not working once I add data too the table, so I guess I am adding it incorrectly
If you run this and click the add button you will then see that it is not working
* Main.java
* Created on 17 November 2007, 10:55
* To change this template, choose Tools | Template Manager
* and open the template in the editor.
package tester;
* @author kilps
import javax.swing.*;
import java.awt.*;
import java.awt.event.*;
import javax.swing.event.*;
import javax.swing.table.TableModel;
public class Main extends JFrame {
    JScrollPane teamManageScrollPane = new javax.swing.JScrollPane();
    JTable teamManageTable = new javax.swing.JTable();
    JLabel addTeamLabel = new javax.swing.JLabel("Add a new team: ");
    JLabel addTeamNameLabel = new javax.swing.JLabel("Name: ");
    JTextField addTeamName = new javax.swing.JTextField();
    JLabel addTeamContactNumberLabel = new javax.swing.JLabel("Contact Number: ");
    JTextField addTeamContactNumber = new javax.swing.JTextField();
    JLabel addTeamContactEmailLabel = new javax.swing.JLabel("Contact Email: ");
    JTextField addTeamContactEmail = new javax.swing.JTextField();
    JLabel addTeamOtherInfoLabel = new javax.swing.JLabel("Other Info: ");
    JScrollPane addTeamOtherInfo = new javax.swing.JScrollPane();
    JTextArea addTeamOtherInfoBox = new javax.swing.JTextArea(5,20);
    JButton addTeamSubmit = new javax.swing.JButton("Submit New Team");
    String [] tableHeader = new String[] {"Team Name", "Contact Number", "Contact Email","Other Info"};//table header
    /** Creates a new instance of Main */
    public Main() {
        method();
    public void method() {
        teamManageTable.setModel(new javax.swing.table.DefaultTableModel(new String[][] {{"some","data"},{"some","more"}},new String[] {"1","2"}));
        //object specific stuff
        teamManageScrollPane.setViewportView(teamManageTable);
        addTeamLabel.setFont(new java.awt.Font("Dialog", 1, 14));
        addTeamOtherInfo.setViewportView(addTeamOtherInfoBox);
        //setup window
        JFrame teamsWindow=new JFrame("Manage Teams");
        //fancy layout stuff courtesy netbeans gui builder
        GroupLayout layout = new javax.swing.GroupLayout(teamsWindow.getContentPane());
        teamsWindow.getContentPane().setLayout(layout);
        layout.setHorizontalGroup(
                layout.createParallelGroup(javax.swing.GroupLayout.Alignment.LEADING)
                .addGroup(layout.createSequentialGroup()
                .addContainerGap()
                .addGroup(layout.createParallelGroup(javax.swing.GroupLayout.Alignment.LEADING)
                .addComponent(addTeamLabel)
                .addGroup(layout.createSequentialGroup()
                .addComponent(addTeamNameLabel)
                .addPreferredGap(javax.swing.LayoutStyle.ComponentPlacement.RELATED)
                .addComponent(addTeamName, javax.swing.GroupLayout.PREFERRED_SIZE, 100, javax.swing.GroupLayout.PREFERRED_SIZE))
                .addGroup(layout.createSequentialGroup()
                .addComponent(addTeamContactNumberLabel)
                .addPreferredGap(javax.swing.LayoutStyle.ComponentPlacement.RELATED)
                .addComponent(addTeamContactNumber, javax.swing.GroupLayout.PREFERRED_SIZE, 100, javax.swing.GroupLayout.PREFERRED_SIZE))
                .addGroup(layout.createSequentialGroup()
                .addComponent(addTeamContactEmailLabel)
                .addPreferredGap(javax.swing.LayoutStyle.ComponentPlacement.RELATED)
                .addComponent(addTeamContactEmail, javax.swing.GroupLayout.PREFERRED_SIZE, 100, javax.swing.GroupLayout.PREFERRED_SIZE))
                .addGroup(layout.createSequentialGroup()
                .addComponent(addTeamOtherInfoLabel)
                .addPreferredGap(javax.swing.LayoutStyle.ComponentPlacement.RELATED)
                .addComponent(addTeamOtherInfo, javax.swing.GroupLayout.PREFERRED_SIZE, javax.swing.GroupLayout.DEFAULT_SIZE, javax.swing.GroupLayout.PREFERRED_SIZE))
                .addComponent(teamManageScrollPane, javax.swing.GroupLayout.PREFERRED_SIZE, 420, javax.swing.GroupLayout.PREFERRED_SIZE)
                .addComponent(addTeamSubmit))
                .addContainerGap(20, Short.MAX_VALUE))
        layout.setVerticalGroup(
                layout.createParallelGroup(javax.swing.GroupLayout.Alignment.LEADING)
                .addGroup(layout.createSequentialGroup()
                .addContainerGap()
                .addComponent(teamManageScrollPane, javax.swing.GroupLayout.PREFERRED_SIZE, 112, javax.swing.GroupLayout.PREFERRED_SIZE)
                .addPreferredGap(javax.swing.LayoutStyle.ComponentPlacement.RELATED)
                .addComponent(addTeamLabel)
                .addPreferredGap(javax.swing.LayoutStyle.ComponentPlacement.RELATED)
                .addGroup(layout.createParallelGroup(javax.swing.GroupLayout.Alignment.BASELINE)
                .addComponent(addTeamNameLabel)
                .addComponent(addTeamName, javax.swing.GroupLayout.PREFERRED_SIZE, javax.swing.GroupLayout.DEFAULT_SIZE, javax.swing.GroupLayout.PREFERRED_SIZE))
                .addPreferredGap(javax.swing.LayoutStyle.ComponentPlacement.RELATED)
                .addGroup(layout.createParallelGroup(javax.swing.GroupLayout.Alignment.BASELINE)
                .addComponent(addTeamContactNumberLabel)
                .addComponent(addTeamContactNumber, javax.swing.GroupLayout.PREFERRED_SIZE, javax.swing.GroupLayout.DEFAULT_SIZE, javax.swing.GroupLayout.PREFERRED_SIZE))
                .addPreferredGap(javax.swing.LayoutStyle.ComponentPlacement.RELATED)
                .addGroup(layout.createParallelGroup(javax.swing.GroupLayout.Alignment.BASELINE)
                .addComponent(addTeamContactEmailLabel)
                .addComponent(addTeamContactEmail, javax.swing.GroupLayout.PREFERRED_SIZE, javax.swing.GroupLayout.DEFAULT_SIZE, javax.swing.GroupLayout.PREFERRED_SIZE))
                .addPreferredGap(javax.swing.LayoutStyle.ComponentPlacement.RELATED)
                .addGroup(layout.createParallelGroup(javax.swing.GroupLayout.Alignment.LEADING)
                .addComponent(addTeamOtherInfoLabel)
                .addComponent(addTeamOtherInfo, javax.swing.GroupLayout.PREFERRED_SIZE, javax.swing.GroupLayout.DEFAULT_SIZE, javax.swing.GroupLayout.PREFERRED_SIZE))
                .addPreferredGap(javax.swing.LayoutStyle.ComponentPlacement.RELATED)
                .addComponent(addTeamSubmit)
                .addContainerGap(28, Short.MAX_VALUE))
        teamsWindow.pack();
        teamsWindow.setVisible(true);
        addTeamSubmit.addActionListener(new ActionListener() {
            public void actionPerformed(ActionEvent e) {
                //first do fancy check so we have a dynamic array type thing
                 teamManageTable.setModel(new javax.swing.table.DefaultTableModel(new String[][] {{"some","data"},{"some","more"},{"even","more"}},new String[] {"1","2"}));
        teamsWindow.addWindowListener(new WindowListener() {
            public void windowClosed(WindowEvent arg0) {}
            public void windowActivated(WindowEvent arg0) {}
            public void windowClosing(WindowEvent arg0) {
                //on close
            public void windowDeactivated(WindowEvent arg0) {}
            public void windowDeiconified(WindowEvent arg0) { }
            public void windowIconified(WindowEvent arg0) {}
            public void windowOpened(WindowEvent arg0) {}
        teamManageTable.getModel().addTableModelListener( new TableModelListener() {
            public void tableChanged(TableModelEvent e) {
                int row = e.getFirstRow();
                int column = e.getColumn();
                TableModel model = (TableModel)e.getSource();
                String columnName = model.getColumnName(column);
                Object data = model.getValueAt(row, column);
                // Do something with the data...
                System.out.println("hi");
     * @param args the command line arguments
    public static void main(String[] args) {
        // TODO code application logic here
        new Main();
}thanks

Problem with multi take drum tracks not working with group selection editing

HI All
Ive recently tracked drums into using 7 mics and doing multiple takes layered on top of each other, the 7 takes belong to the same group and i have enabled group editing in the settings.
I think i changed the comp options at the end of the track and as a result audio tracks 1 and 2 edit between takes together fine. I.e. when i choose say take 5 with track it does the same selection for track 2.
Tracks 3-7 work in the same way fine, im just wondering if anyone knows how to get them as a complete group again so that when i choose take 5 for example on the one audio track, it will make the same selection for all of them!
thanks

Colin,
I did a multi camera edit of Act 1 of a taped performance and all went well. Moved on to Act 2, which ran longer and each camera needed a tape change. So I matched the clips from each camera on each video track and tried to move on to the sync & then create a multi camera sequence stage of the project. That's when I hit a road block. I could not sync the four video tracks. So I consulted Adobe's on line help and this was all I could find about my predicament:
Note: Adobe Premiere Pro uses an overlay edit when synchronizing clips. Take care not to overwrite adjacent clips if you have multiple clips on the same track.
So what was I to do next? I found your post and now know exactly what to do. Thanks for a great explaination and saving me a lot of head scratching.
Why couldn't Adobe explain it as well?
Thanks,
Angelo

My laptop macbook pro has a problem with usb port they are not working.

hi there i have a late 2011 mac pro, its been 2 years of purhase however reary used, now it has a problem with usb port are drawing too much power and usb ports are dissabled from the system. now i can not use usb ports. do yo have solution for it??? cheers

Reset SMC. http://support.apple.com/kb/HT3964
Choose the method for:
"Resetting SMC on portables with a battery you should not remove on your own".
Best.

I am having the same problem with my sound, it does not work with my games. I tried the info that was given below

I tried the suggestion for the sound, but it is not working. the sound will not play for my games, but it does play for all other Apps

As you don't say what suggestion it is that you've tried, I don't know whether you mean for having notifications muted, so you may already have tried the following.
Depending on what you've got Settings > General > Use Side Switch To set to (mute or rotation lock), then you can mute notifications by the switch on the right hand side of the iPad, or via the taskbar : double-click the home button; slide from the left; and it's the icon far left; press home again to exit the taskbar. The function that isn't on the side switch is set via the taskbar instead : http://support.apple.com/kb/HT4085

Problem with Nokia N73 -- Camera is not working

Recently i have purched Nokia N73.
Some times my camera is not working ,means it's stuck.
but after some time or after a day it's working fine.
what is the reason ?
is there any setting?
Plz let me know the same.
Wating for your positive reply ASAP.

try to upgrade your software
see this link-> http://europe.nokia.com/softwareupdate

IMessage not working like it should!

I have a problem that I'm sure other people have as well.
The problem in a few words is that iMessage is not capable of fast switching between Wi-Fi and cellular network.
Example 1:
When I am texting with my girlfriend and I'm inside my house, but a bit too far from my router (but still connected to it, yet with a weak signal), the iPhone often fails to send the message (red dot error) or with a certain amount of delay (usually a minute or two).
Example 2:
When I am outside, on a location where I don't have a 3G connection and obviously no Wi-Fi either, I have the same issue as described in the example above. It also occurs when having a 3G connection, but this issue is much less occuring.
In my opinion, Apple should seriously rethink the way iMessage works, cause it is quite annoying when you think that a message has been sent. When you check your iPhone 20 min/ 1 hour/ 2 hours... later, and you find out the message hasn't got out, you feel like smashing the phone against a wall. Especially when the message is urgent.
I never have this problem with What's App, that's why I prefer to continue using this. Maybe Apple should buy them, so they have at least proper working software.
Is there a way to fix this? The level of 'this annoys the crap out of me' on a scale from 1 to 10 is 11 right now.

I notice the same issues with my iPhone and iPad. I hope there will be a fix for it soon. The same type of problem occurs when I am using Safari and am farther away from my router at home; my device continues to try using the wi-fi instead of switching to 3G to optimize the download speed.
Another problem with iMessage: my sister has an iPhone without a data plan and has to turn off iMessage to send texts when she is outside of a wi-fi zone, otherwise it keeps try to send as an "iMessage" instead of a "Text Message" and displays the red dot error that it cannot send. And when I try sending her an iMessage (my iPhone knows she has iOS 5 with iMessage) it shows as delivered, even though she has her iMessage turned off and does not receive it until she turns it back on.
One more thing: The whole iMessage to email address and/or phone number is very lame...please make all iMessages (sent and received to either location) sync between registered devices. It just makes more sense than having 2 conversations open with the same person becasue you iMessage from your iPhone using your phone number then switched to your iPad using your email address..
There are a lot of things to fix/improve with iMessage to make it as good as WhatsApp or BBM...
Get to work, Apple!

Automatic Backup not working like it should

Is anyone else having any problems with their iDevice not doing the automatic iCloud backups? Ever since I installed iOS 5, I have had to run the iCloud backup manually and its a little concerning that it wont run automatically.

Yep same here no indication that any settings are incorrect, plugged the phone in, made sure wi-fi is connected lock screen on and........nothing. Manual only. Too wierd.
iPhone 4, Lion

Power button not working like it should...

When booting up, I have to press power button several times. Finally, when it does come on (Pavilion dv6Notebook), the fan runs quite a bit. I am worried my hard drive is about to go. Any tips?

Try a soft reset and see what happens.
If the power button is not working, here is a link for a program that remaps the power button on your TX so you can hard reset and power off.
There is a program called PowerBtn 2.0. This allows you to turn off the device when the power button does not work. (Thanks to Computerwiz for the info.)
Click on the following link for the website.
http://www.canuck-software.ca/
For reference purposes, click on the following link for the support page for your device on the kb.hpwebos.com webpage.
http://kb.hpwebos.com/wps/portal/kb/na/tungsten/tx/unlocked/home/page_en.html
There are links on the page to the user guide, troubleshooting, how to's, downloads, etc.

RegExp not working like it should

Maybe I just need another pair of eyes looking at this, but I have a RegExp instance that should work according to multiple tools on the web but it's not matching when it should in my application. The expression should match if there isn't any leading or trailing spaces. Here's a code snippet:
var regexp:RegExp = new RegExp("^\S.*\S$|^\S(?!.)", "s");
if(regexp.exec("Hello World") == null)
trace("NO MATCH");
Using tools such as Grant Skinners RegExr (http://gskinner.com/RegExr/) it appears that the previous code should get a match. Does anyone see an issue or know why it isn't working?

Hi All,
while assigning value to a RegEx in constructor itself, we can either specify pattern (for which we need not escape already escaped character)
like
var regexp:RegExp = new RegExp(/^\S.*\S$|^\S(?!.)/s)
or we can specify a string (for which we need to escape already escaped characters)
like
var regexp:RegExp = new RegExp("^\\S.*\\S$|^\S(?!.)","s")
Regards,
Abihshek Chaudhary

Problems with "find nearby missing photos", not working like it should in LR4

Similar Messages

Maybe you are looking for