Problems with Finder in Lion OS 10.7

I can't view the Finder window to access any of my folders. It shows up when sliding between "desktops" when using the "three finger scroll gesture", but is not manipulable, and disappears when it settles on the next "desktop".

@babowa - Interestingly, I tried ClamXav prior to using virus barrier and the problems you mention (regarding antivirus software proflems), ironically, are issues I had only with ClamAV. It turned my computer into a slug whenever running scans, which I just couldn't work with. VirusBarrier runs very well for me.
I have run ClamXav on my Mac for many years, without the problems you indicate. It is mainly to satisfy some network requirements for an antivirus to be installed, such as university campuses and the commercial environment.
I once tried an early version of Sophos anti-virus which slowed everything down. I think antivirus software taken from the PC environment and hastily adapted for the Mac market are generally not good.
Why don't you take the matter to the Intego forum, where it belongs?
Tycoon24 says "Then if your computer has somehow mysteriously imploded before being vaporized under its own pressure due to Intego's Mac anti-malware software - maybe try ClamXav and according to babowa things should magically become stable:"
While I admire your obvious ability at hyperbole, I appreciate your underlying idea, that there may be other issues with the poster's computer that could be affecting it's use with any antivirus software.

Similar Messages

HT1338 problems with OS X Lion. I upgraded and now my macbook pro has been crashing...

I am having problems with OS X Lion. I upgraded and now my macbook pro has been crashing... what's going on? and someone please help !!!!

If you have more than one user account, you must be logged in as an administrator to carry out these instructions.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Select the most recent panic log under the heading System Diagnostic Reports on the left. If you don't see that heading, select
View ▹ Show Log List from the menu bar. Post the entire contents of the panic report — the text, please, not a screenshot. In the interest of privacy, I suggest you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header and body of the report, if it’s present (it may not be.) Please don't post shutdownStall, spin, or hang reports.

Anyone else having a problem with HyperSpaces in Lion?

Anyone else having a problem with HyperSpaces in Lion? It keeps taking the focus of all windows but doesn't actually open.

Thanks for posting this!! I was getting crazy with the focus being stolen all the time and I could not the source of the problem anywhere.
So yes, I have the same problem, had to remove hyperspace. I use a MacBook Pro.

Problem with finding a File

Hi:
I am having problem with finding a file on the OS
(using Win2000) when given an absolute pathname;
here is the rough code:
//theFile is specified at command line
File f = new File(theFile);
BufferedReader in = new BufferedReader(new FileReader(f));When I run the program, I type
java myProgram C:\aFolder\theFile
But it can't find theFile. I am not sure what's wrong.
Thanx

No that can't be it; he takes the filename from the command line, so escaping isn't an issue (unless he used a shell that unescaped '\\' for him, but I think he's using the win2000 cmd shell).
Dunno, I have no idea of your filesystem or shell. Just do some debugging, around the lines of:
File f = new File(theFile);
if (f.exists()) {
System.err.println(theFile + " exists.");
} else {
System.err.println(theFile + " doesn't exist.");
}

Problem with Finder and Menu Fonts (uppercase A)

Hello --
I'm having a problem with fonts. All the characters that appear under icons in the Finder or in the menu for any application appear as uppercase As with boxes around them. There appears to be one uppercase A for each character that should be there. If I click-pause-click to edit the filename in the Finder, the text appears normal during the duration of the change, and then reverts to uppercase A with a box around it again. All other operation of the computer is normal.
I was watching and downloading video files in iTunes when the problem appeared. When I pressed ESC to exit full-screen mode, the Finder said that my start-up disk was almost full, and I saw the font problem. Upon investigating, I discovered that my start-up disk was completely full (and the download had failed), so the first thing I did was move some video files to an external drive, which freed about 5 GB.
Since freeing the space, I've tried the following to fix it, in this order:
1. booted from Tiger CD to run Repair Disk from Disk Utility
2. rebooted from the boot hard drive to run Repair Disk Permissions from Disk Utility
3. run through Disk Warrior
4. created a test admin user and logged in as that user
5. removed font cache files using terminal
6. booted in safe mode, logged in as myself, and then rebooted normally
None of these actions has had any effect. The computer is still operating normally, except for the characters that don't display correctly.
I'm running 10.4.6 on a Titanium Powerbook 500 MHz with 512MB RAM. A few months ago, I replaced the internal hard drive with an 80GB Seagate.
Tibook 500 Mac OS X (10.4.6)

Hi again, zoobieboots —
I appreciate your initiating a new thread. Your post here helps to make the situation much clearer than in bmewolf's thread — particularly in terms of what you've already tried. Thanks again.
A few initial thoughts —
(a) As I was trying to suggest previously, you're apparently operating (after moving some files to an external drive) with ~6-10% (?) free disk space. Particularly given that you were working with large video files when this appeared, File fragmentation would be expected. While I haven't heard of this particular symptom resulting from fragmentation, that would be a concern to me — particularly since this immediately preceded the problematic behavior.
I've read some good reports about iDefrag, but haven't used it myself. A demo version is apparently available for HDs < 100GB. But you'd presumably need to free significantly more space first (you haven't actually said whether 5GB or ?? is the total available now). Having never experienced severe fragmentation, I don't fully understand its consequences — but another participant may be able to explain this.
<b>(b) You don't mention trying to troubleshoot potentially corrupt or incompatible fonts (or font caches), also as outlined in the other thread. As I suggested there, The X Lab's "undoing Font Book" FAQ is a useful resource in this.
(c) Although I agree it may be an unsatisfying "solution," an Archive & Install did work for bmewolf in the case that you've indicated matches yours closely.
I hope one of these suggestions is helpful. Please post back to discuss your progress.
Regards,
Dean

Problem with "find" mode in adf/swing application

Hi all,
I'm working on ADF Swing application which uses MS SQL Server 2005 (JDeveloper 10g 10.1.3)
I think that my issue might be well-known…sorry if it has been already discussed somewhere else…
I have a problem with the “find” mode for a detail panel in a master-detail form…(To make it clear the “find” mode is switched on when clicking on the special button on a navigation panel).
So this mode works well in a master panel, but it demonstrates strange behavior on a detail panel, i.e. it takes me two attempts to find the necessary child object and it doesn’t switch back in a simple way from this mode to the normal mode….say if we are in the department 10 (Dept is a master form) we can’t simply find KING employee (Emp is a detail form)…is there any workaround for this?
Thanks in advance. Alex.

Hi Frank, please look this issue

I am having email problems with the new Lion. stmp, imap, etc. I have looked up google info and It is confusing when it comes to TS, SSL also, please explain how to set it up so my email goes out and comes in securely. Help

I am having email problems with the new Mountain Lion. stmp, imap, etc. I have looked up google info and It is confusing when it comes to TS, SSL also, please explain how to set it up so my email goes out and comes in securely. Help
Incoming Mail (IMAP) Server - requires SSL:
imap.gmail.com
Use SSL: Yes
Port: 993
Outgoing Mail (SMTP) Server - requires TLS:
smtp.gmail.com (use authentication)
Use Authentication: Yes
Use STARTTLS: Yes (some clients call this SSL)
Port: 465 or 587
Account Name:
your full email address (including @gmail.com) Google Apps users, please enter username@your_domain.com
Email Address:
your full Gmail email address ([email protected]) Google Apps users, please enter username@your_domain.com
Password:
your Gmail password
The Quick Answer
Follow the instructions below to set up IMAP1 access in most email clients.
Google Apps users, please follow the default instructions unless otherwise noted, replacing 'your_domain.com' with your actual domain2 name.
this is all greek to me. WHAT IS STARTTLS? On the first page of Apple set up there is a TLS certificate and it is marked NONE- should I change it to the long APPLE CERT option? The next page under ADVANCED: THERE IS A BOX SSL MARKED. Then IMAP Path Prefix - I put stmp.gmail.com.. is that right? Port 993 can use this one? as 456 doesn't work and 587 said it wasn't safe. Under AUTHENTICATION I used PASSWORD. Should I have used external client cert TLS?
Please help me set this up securely. Thanks

Apple - Support - Mail Setup Assistant

Is anyone facing problems with quicktime on lion???

I recently upgraded my macbook pro to lion osx and the problems keep showing up one by one... quicktime is the worst. it has literally stopped functioning! at first, there was this problem with audio and video not being synched; and then it got worse and was totally playing the videos without any audio track and now, after a week or so, the app is not working AT ALL!!!
I hit "play", the icon changes to "pause" as in : "i'm playing the video!" and then it stops and NOTHING HAPPENS. and it's not about the format of the videos either. i treid .wmv (which was working btw), .avi or .mov (made by imovies for crying out loud!)...
when its photoshop being slow and laggy, you can blame adobe! but isn't quicktime supposed to be the "official" apple player??? am heavily disappointed apple!

First:
iOS: Troubleshooting FaceTime
Then
Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Go to Settings>FT>You can be Reached At and sing out and sign back in
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: Back up and restore your iOS device with iCloud or iTunes
- Restore to factory settings/new iOS device.

Problem with finding directory

Hi,
I built an application on Windows and I have to find a document within another directory. I am using getAbsolutepath and I am having problems with the following type of path:
File test = new File("u1/usr/my program/myFile/")
if(test.isDirectory())
this works on Windows, however it doesn't work on Unix....I also tried the following on Unix
File test = new File("u1/usr/my\\ program/myFile/")
if(test.isDirectory())
and it also doesn't work.
thanks in advance for any help!

I just made a directory with a space in it (on Linux) and created a file to find it, and it worked fine. I have the directory
/home/joshua/my directory
And made the call
File file = new File("/home/joshua/my directory");and the file did exist and was a directory.
Try testing the call with
System.out.println("file = " + file.getAbsolutePath());
And make sure that that file exists.

10.4.6 installation problem (with finder)

First, sorry if someone else's post covered this, but I've been doing a couple of hours of searching and can't find anything so on with the problem...
Well after installing 10.4.6 and restarting my iMac, very peculiarly finder doesn't start up and the hard drive and iDisk icons (and in fact all the desktop icons) don't appear. Also, when I attempt to shutdown or restart the screen goes blue and kicks me back to just the desktop background (without hard drive etc icons or the menu bar at the top) with the dock. I hope some of this makes sense and maybe even rings some bells (I've never had any problems like this with previous updates). It seems to be a problem with any time that finder is used (when I go to the force quit menu it's not even there to relaunch) and I can't start in safe mode so I'm a bit worried.
Since all the applications work, I'm hopeful of solving this and any thoughts at all would be greatly appreciated since I'm absolutely stuck. Cheers.
iMac G5 Mac OS X (10.4.6)
iMac G5 Mac OS X (10.4.6)

Since we can't examine the machine without further possible damage to the data, the best thing to do first is get all your data backed up. If you buy Prosoft Data Rescue and an external firewire hard drive of equivalent or larger size, you can usually get back almost all your data, if not all of it:
http://www.prosofteng.com/
In the future never upgrade without first performing a backup. My FAQ here outlines how to avoid upgrade issues in the future:
http://www.macmaps.com/upgradefaq.html
Disclaimer: Reference to links I make to my Macmaps.com website are a for your information only type reference. I do not get any profit from this page, and it is open to the public.

Problem with fonts after lion install

after installing lion, font book detects problems with fonts

Likely a corrupted font cache.
Download the free OnyX and run all the cleaning and maintainence aspects and reboot.
http://www.titanium.free.fr/
Read my post about backup, repair and restore options and the link to Pondini's TimeMachine page
https://discussions.apple.com/message/16276201#16276201

Time machine backup problem with upgrade to Lion - Choose Backup Disk button non-existant

Hi, I just upgraded my mac mini to Lion and have encountered a problem with by Time Machine. It no longer sees my networked drive for back up. So, I followed the instructions on this site http://code.stephenmorley.org/articles/time-machine-on-a-network-drive/ and get to item 6b. and have a problem I have not been able to sort out. Instead of the button "Choose Backup Disk" on the Time Machine window, I have a button "Select Disk" with a button "Options" under it. When I click "Select Disk" I get a window promtping me to "Set Up Other Time Capsule" and clicking that takes me to a window for AirPort Utility. (screen shot )
Anyone know why I don't have the right button for starters and why I can't access any drives on my machine at all? I followed the web instructions on the site I mention above because initially I had an error about AFP, so suspected the drive set up here (it is my work) is incompatible.
(The only IT guy we have is on vacation for 2 weeks and then I am on vacation for 2 weeks and can't wait a month in order to back up! Thought I would try here to see if I can get answers before I am away.)
Thanks in advance!

i had a similar problem when I first installed Lion last year. It seems that some network NAS products need a firmware update to work with Lion. I contacted the manufacturer and they helped me out. I am using a Synology NAS system. Problem solved after firmware update.

Problems with recent Mt. Lion update? October

I'm having a lot of weird issues since running a software update. I'm on a 11-inch MacBook Air, purchased in August 2012, running 10.8.2. I ran the Mt. Lion software update and ever since then I've had the following issues:
- Cannot empty trash. I've tried secure empty trash, holding down alt/option and secure empty trash, repairing disk permissions and restarting. Nothing. I get the error:
"The operation can’t be completed because you don’t have permission to access some of the items."
- Wireless network connections timing out. This is happening at home and at work.
- Google account-related things not working. I opened iCal and was prompted to deal with a certificate that was invalid. I thought maybe it was an application-specific password thing. I couldn't get the certificate info window to stop popping up. Ended up having to force quit.
- Fantastical is also prompting me for my two Google account passwords, but when I enter them I get an error code. Error 1. I've e-mailed Flexibits about this issue.
- Being prompted by all apps to access my keychain, sometimes more than once. I guess after the update it forced all my apps to prompt me for new permissions. This is more annoying than anything else.
Overall I'm still able to use my machine, but not in the seamless way I was prior to this update. Anyone having problems with this? Or know of a fix? I'm calling Apple later today to see if they have some ideas. Thanks for your help!

Sounds like your home folder permissions are out of whack.
Open Terminal and paste this command:
sudo chown -R `id -un` ~
Put in your password and press 'return'.
Wait till it finishes, it might take a while. Restart the computer and test.

Problems with Finder after installing 10.5.8

After upgrading to 10.5.8 update, couple of very basic things are not working correctly in Finder..
1. Pressing Cmd+A from keyboard no longer does a select all. However, doing same by clicking menu option works. This is not a problem with my keyboard because pressing cmd+A works fine in other applications like TextEdit.
2. Unable to type anything into the search bar embedded in Finder window. However, searching by clicking the spotlight magnifying glass icon still works.
Anyone else having same problems? Any way to fix these issues?

The problem seem to have resolved automatically after system reboot. (p.s. The system had already rebooted after the update). If the problem repeats, I will run the disk utility and see if it helps.

Problems with Finder on MBP 2014 with os x 10.10

Hello guys,
i have a problem with my macbook pro 13" from 2014 mid.
Sometimes the finder does not show the files in any folders.
I open the folder 2 times before i can see some files in the folder.
When i see the files, i can not scroll and the font of the files is fat.
I install os x 10.10 again, same Problem. Still reset the PRAM also, without any solution.
Can somebody help me?
Thx

Your videos show the Finder in icon view mode, not cover flow. I think this is a bug, but I don't know what triggers it. I've seen one other report like yours.
1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
Don't be put off by the complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. As I wrote above, it changes nothing. It doesn't send or receive any data on the network. All it does is to generate a human-readable report on the state of the computer. That report goes nowhere unless you choose to share it. If you prefer, you can act on it yourself without disclosing the contents to me or anyone else.
You should be wondering whether you can believe me, and whether it's safe to run a program at the behest of a stranger. In general, no, it's not safe and I don't encourage it.
In this case, however, there are a couple of ways for you to decide whether the program is safe without having to trust me. First, you can read it. Unlike an application that you download and click to run, it's transparent, so anyone with the necessary skill can verify what it does.
You may not be able to understand the script yourself. But variations of the script have been posted on this website thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. Any one of the millions of registered users could have read the script and raised the alarm if it was harmful. Then I would not be here now and you would not be reading this message.
Nevertheless, if you can't satisfy yourself that these instructions are safe, don't follow them. Ask for other options.
4. Here's a summary of what you need to do, if you choose to proceed:
☞ Copy a line of text in this window to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
5. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
6. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
7. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts SerialATA 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports ' com.clark.\* \*dropbox \*genieo\* \*GoogleDr\* \*k.AutoCAD\* \*k.Maya\* vidinst\* ' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 "` route -n get default|awk '/e:/{print $2}' `" 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB ' com.adobe.AAM.Updater-1.0 com.adobe.AdobeCreativeCloud com.adobe.CS4ServiceManager com.adobe.CS5ServiceManager com.adobe.fpsaud com.adobe.SwitchBoard com.apple.AirPortBaseStationAgent com.apple.FolderActions.enabled com.apple.FolderActions.folders com.apple.installer.osmessagetracing com.apple.mrt.uiagent com.apple.ReportCrash.Self com.apple.rpmuxd com.apple.SafariNotificationAgent com.apple.usbmuxd com.google.keystone.agent com.google.keystone.daemon com.microsoft.office.licensing.helper com.oracle.java.Helper-Tool com.oracle.java.JavaUpdateHelper ' ' 879294308 461455494 3627668074 1083382502 1274181950 1855907737 464843899 3694147963 1417519526 1233118628 2456546649 2806998573 2778718105 2636415542 842973933 3301885676 891055588 998894468 695903914 1443423563 ' 51 5120 files );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^$[0-9]+$ /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n-\t%s\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' s/[0-9A-Za-z._]+@[0-9A-Za-z.]+\.[0-9A-Za-z]{2,4}/EMAIL/g;/faceb/s/(at\.)[^.]+/\1NAME/g;/\/Shared/!s/(\/Users\/)[^ /]+/\1USER/g;s/[-0-9A-Fa-f]{22,}/UUID/g;' ' s/^ +//;/de: S|[nst]:/p;' ' {sub(/^ +/,"")};/er:/;/y:/&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: [^EO]|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Genesy|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<10) print "com.apple.";} ' ' { sub(/ :/,"");print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/^root$/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1100) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/{next};/(etc|Preferences|Launch[AD].+)\// { sub(".(/private)?","");n++;print;} END { split("'"${p[41]}"'",b);split("'"${p[42]}"'",c);for(i in b) print b[i]".plist\t"c[i];if(n<500) print "Launch";} ' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.([bw]|plu)/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| |\n","\\|\\|kMDItem'${p[35]}'=");sub("^...."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[43]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/{next};/%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|BKAg|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";p="uniq -c|sed -E '"'s/ +\$[0-9]+\$\$.+\$/\\\2 x\\\1/;s/x1$//'"'";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]$1|p;b=b$1;} END { close(p);if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n [N/A]";"cksum "F|getline C;split(C, A);C="checksum "A[1];"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text(, with v.+)?$|(Bo|PO).+ sh.+ text ex|XM)/) F=F" ("T", "C")";else F=F" ("C")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n ...and %s more line(s)\n",l-L);} ' ' s/^ ?n...://p;s/^ ?p...:/-'$'\t''/p;' 's/0/Off/p' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / / { print "'"${p[28]}"'";exit;};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/$L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9|"sort|uniq";} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' ' /l: /{ /DVD/d;s/.+: //;b0'$'\n'' };/s: /{ /V/d;s/^ */- /;H;};$b0'$'\n'' d;:0'$'\n'' x;/APPLE [^:]+$/d;p;' ' /^find: /d;p;' "`S0 44 45`" ' BEGIN{FS="= "} /Path/{print $2} ' ' /^ *$/d;s/^ */ /;' ' s/^.+ |\(.+$$//g;p ' '/\.(appex|pluginkit)\/Contents\/Info\.plist$/p' ' /2/{print "WARN"};/4/{print "CRITICAL"};' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps sudo\ crontab sudo\ iotop top pkgutil 'PlistBuddy 2>&1 -c "Print' whoami cksum kextstat launchctl sudo\ launchctl crontab 'sudo defaults read' stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' defaults\ read scutil sudo\ dtrace sudo\ profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil sudo\ lsof test osascript\ -e sysctl\ -n pluginkit );c2=(com.apple.loginwindow\ LoginHook '" /L*/P*/loginw*' "'tell app \"System Events\" to get properties of login items'|tr , \\\n" 'L*/Ca*/com.ap*.Saf*/E*/* -d 1 -name In*t -exec '"${c1[14]}"' :CFBundleDisplayName" {} \;|sort|uniq' '~ $TMPDIR.. $ -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 $' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' :${p[35]}\" :Label\" '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$(RefProc): \$Message' -k Sender kernel -k Message Req 'bad |Beac|caug|corru|dead[^bl]|FAIL|fail|GPU |hfs: Ru|inval|jnl:|last value [1-9]|n Cause: -|NVDA$|pagin|proc: t|Roamed|rror|ssert|Thrott|tim(ed? ?|ing )o|WARN' -k Message Rne 'Goog|ksadm|Roame|SMC:|suhel| VALI|ver-r|xpma' -o -o -k Sender fseventsd -k Message Req SL -o -k Sender Req launchd -k Message Req de: " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cght] ! -name .?\* ! -name \*ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true $ -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '/S*/*/Ca*/*xpc* >&- ||echo No' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,Ex}* {/,}L*/{A*d,Ca*/*/Ex,Co{mpon,reM},Ex,In{p,ter},iTu*/*P,Keyb,Mail/B,Pr*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -path \\*s/Resources -prune -o -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,mach_i*/*,pam.d/*,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t {/S*/,/,}L*/Lau*/*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' '+c0 -i4TCP:0-1023' com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' "+c0 -l|awk '{print(\$1,\$3)}'|sort|uniq -c|sort -n|tail -1|awk '{print(\$2,\$3,\$1)}'" -m 'L*/{Con*/*/Data/L*/,}Pref* -type f -size 0c -name *.plist.???????|wc -l' kern.memorystatus_vm_pressure_level );N1=${#c2[@]};for j in {0..9};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents XPC\ cache Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching SATA Descriptors App\ extensions Lockfiles Memory\ pressure );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};';done;A7(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0() { [[ "$v" ]]&&sed -E "$s"<<<"$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v"|sed -E "$s";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "${s[63]}"<<<"$v"`&&C1 1 $1;};for i in 1 2;do for j in 0 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;D20 0 $((N1+1)) 2;D10 0 $N1 1;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;D13 0 $((N1+9)) 59 50;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 14 12 14;D22 6 36 13 15;D22 38 52 66 54;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D22 35 49 61 51;D22 11 17 17 20;for i in 0 1;do D22 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A2 19 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;B3 4 0 65;A3 14 6 32 0;B4 0 16 11;A1 39 50 64;B7 16;C3 52;D13 24 24 32 31;D13 25 37 32 33;A2 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D13 21 0 32 19;D13 10 42 32 40;D22 29 35 46 39;};D23 14 1 62 42;D12 34 43 53 44;D12 22 20 32 25;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 26 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D23 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 20 42 32 41;D13 37 2 48 43;D13 4 5 32 1;D13 4 3 60 5;D12 26 48 49 49;B3 4 22 57;A1 26 46 56;B7 22;B3 0 0 58;C3 47;D22 4 4 50 0;D12 4 51 32 53;D23 22 9 37 7;A7;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
8. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
9. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
exec bash
and press return. Then paste the script again.
10. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
11. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report what happened. No harm will be done.
12. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with the words "Start time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
13. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "You are not authorized to post." That's a bug in the forum software. Please post the test results on Pastebin, then post a link here to the page you created.
14. This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

Problems with Finder in Lion OS 10.7

Similar Messages

Maybe you are looking for