Problems with firing a cluster 2nd time

          hi all,
          we have 4 instances of wls6.0 running on 2 solaris boxes.
          one instance is the admin and the rest are in a cluster..
          after deploying the app homogeneously among the cluster..
          i started the node1 of the cluster(after i started the admin..)
          the app came up and was running well..then i shutdown the admin..still the app
          is running fine on the 1st node of the cluster..but after testing it for a while
          i brought down this node..then i restarted the admin and then the node 1..and
          this time the app is not coming up and the server complains of deployment errors!!
          we configured a dns-host name for the cluster..
          could someone help me gain an insight into this??
          thanks,
          sai

Similar Messages

Hello Apple? How do i fixed my problem with my ipad apps every time i open that apps it takes 10min. to play the games ant its getting LOST MODE and the ipad system is crashing

How do i fixed my problem with my ipad apps every time i open that apps it takes 10min. to play the games ant its getting LOST MODE and the ipad system is crashing

We are fellow users here on these user-to-user forums, you're not talking to iTunes Support nor Apple.
Have you tried closing all apps via the iPad's multitasking bar and then doing a soft-reset and seeing that helps ? To close all apps :
iOS 7: double-click the home button to open the taskbar, and then swipe or drag each app's screen from there up and off the top of the screen to close it, and click the home button to close the taskbar.
iOS 6 and below : from the home screen (i.e. not with any app 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of each app to close it, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
Soft-reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

I installed Mavericks yesterday and have now got problems with QuarkXpress 9. Every time I click on an image and try to move it the application crashes. Anyone had similar problems or got any suggestions?

I installed Mavericks yesterday and have now got problems with QuarkXpress 9. Every time I click on an image and try to move it the application crashes. Anyone had similar problems or got any suggestions?

Hi Guys
Updated my 2 imacs to Maverick yesterday. Schoolboy error on my part not checking if there were problems with any programmes before I did.
Quark is now a nightmare with no short term answer on the way. As a Quark user for over 20 years this is just another reason to hold your hands up and say OK Indesign you win I will have to learn how to use you and Quark will be a distant memory.
I am told there will probably be no solution to getting quak 9 running on Maverick and that you will need to update to 10 in about 2-3 weeks to get back to normal. Having spent a few bob on 2 versions of 9.5 only in Feb this year i didn't really want to upgrade yet.
So its cough up to carry on using Quark or learn Indesign.
I have lost faith in Quark as they are quick to send me e-mails asking me to upgrade to this and that version, why didn't they send one out saying do not upgrade to Maverick. Perhaps they know there loyal follwing will uograde to 10 and will generate a nice little bonus before Xmas.
Lots to do today and will now take 10 times longer to do it. Is this 2013 or 1974!!!!!
If anyone hears of a solution please post ASAP

I have an iMac OS X 10.6.8 and have problems with the backup Disk for Time Machine disconnecting itself with the message that I ejected it improperly.. It ejected itself - why?

I have an iMac OS X 10.6.8 and have problems with the backup drive to Time Machine ejecting itself and so does not automatically backup the way it is meant to do. It is connected with an USB cable to my iMac. What could cause this - malfuntioning drive?

The "iLife" apps are not part of any Mac operating system install and are a separate purchase.
Once you get past 10.6.6 you can purchase and download iPhoto, GarageBand and iMovie. iWeb and iDVD have been discontinued.
Snow Leopard 10.6.6 and higher include the App Store application which is what you use to purchase Lion.

Hi. I have got problem with my ITunes. Every time I´m opening the program I´ve got the message: One unkwown problem is appering (-42032) Can anybode please tell me what to do wit this error? Thanks

Hi. I have got problem with my ITunes. Every time I´m opening the program I´ve got the message: One unkwown problem is appering (-42032) Can anybode please tell me what to do wit this error? Thanks

Gary,
discussions may sometimes be slow for an hour or so (at which point the opening page of discussions will eventually apologize for the inconvenience, back on line soon...) but your description looks like a cache problem.
Try OnyX freeware to do some cleanup and see if that helps.
http://www.titanium.free.fr/index.html

Hey guys!! i have a problem with my i touch 2nd generation...

hey guys!! i have a problem with my i touch 2nd generation... when i plug in my computer doesnt happen and i cant sync with itunes but when i plug it in my imac's sister work properly

Start here:
iPhone, iPad, or iPod touch: Device not recognized in iTunes for Windows

Problem with Airport express N (2nd gen)

Problem with Airport express N (2nd gen)
Firmware 7.6.4
ISP - 20 Mbps ethernet cable
I have MacBook Air 13 mid 2013 os x 10.9.5, ipad 4 ios 8.0.2, ipad4 ios 7.1.2 , iphone 5 ios 7.1.1
When i try to use speedtest.net from my Macbook i got good results of download speed and incredible upload http://www.speedtest.net/my-result/3801286946 (connection 300 Mbps) , both ipads got terrible speedtest download result and incredible uploadhttp://www.speedtest.net/my-result/i/981631804 (connection 150 Mbps), iphone 5 got bad download and great uploadhttp://www.speedtest.net/my-result/i/981695357.
All these tests were done near airport express with really good signal and 5ghz. I tried to choose different channels, 802.11 mode, guest ssid, 5ghz ssid ...
I think that something is wrong with my new airport express. Can anyone help me to solve this problem?
ps sorry for my bad english

As a last resort, try a factory default reset on the AirPort Express as follows:
Power off the AirPort Express
Wait a minute
Hold in the reset button first, and keep holding it in for another 8-10 seconds while you simultaneously plug the Express back in to power
Release the reset button after the hold period and allow a full minute for the Express to restart to a slow, blinking amber light status
On an iPhone or iPad home screen....
Tap Settings
Tap WiFi
Look for a heading of Setup a New AirPort Base Station. If it appears.....
Tap on AirPort Express just below the heading to start the configuration process on the Express again
If you try several factory default resets, and the AirPort Express does not appear under the heading of Setup a New AirPort Base Station, the Express most likely is defective and will need to be replaced.

Lightroom 4.2 - Experiencing problems with images viewed on 2nd monitor

Hi All,
This problem seems to have started with my updating from 4.1 to 4.2. I have my second monitor set as Loupe - Normal and Fit. As I crop an image on my main monitor, the 2nd monitor view does not always change to the cropped view. If I switch to a different photo and then back to the one I just cropped, the 2nd monitor view will then show the cropped image, but it is almost always blurry. Sometimes I can click the image in the 2nd monitor view to change to a 1:1 view and it will look sharp, and then click again back to Fit and then it too will be sharp. Other times I get a message in the 2nd monitor view that says "no image selected" and bouncing back and forth between a different image will correct this.
This all started off with the majority, but not all cropped images showing as blurred and progressed to what I have described above. I seriously though I had a focus problem with my camera!
Is anyone else experinecing this since updating? Suggestions?
Below is the suggested information to provide...
What version of Lightroom? 4.2
Have you installed the recent updates? Yes, 4.2
What operating system? Windows 7 Ultimate 64 bit
What kind(s) of image file(s)? All images are converted to .dng upon import
If you are getting error message(s), what is the full text of the error message(s)? No error messages.
What were you doing when the problem occurred? I am in the develop module cropping images etc.
What other software are you running? Silver Efex Pro 2, but I have had that installed in many prior versions of Lightroom
Tell us about your computer hardware. How much RAM is installed? 32 GB - Yes, I know - overkill...
How much free space is on your system (C:) drive? 119 GB of 223 GB of my solid state drive c:\
Has this ever worked before? Yes
If so, do you recall any changes you made to Lightroom, such as adding Plug-ins, presets, etc.? No other changes other than updating to 4.2
Did you make any changes to your system, such as updating hardware, printers or drivers, or installing/uninstalling any programs? No, no other changes.
Thanks!

Same problem. Not a soloution, but this may be relevant.
http://forums.adobe.com/message/4782916#4782916
Alan

Problem with License MAC after change Time Zone in UCCX 8.02

Hi all,
Please I need Help.
The last weekend, we changed the Time Zone in we Cluster of UCCX 8.02.
Now when entry to administration page, show a warning that says.
“The Unified CCX Systems is currently using a license that has a grace period of 30 days”
How i can solve this problem. I must go back with the change , and return time zone previous ?
Thanks
Guillermo

Welcome to the wonderful world of Cisco Licensing with 8.5 (perhaps 8.0 as well). Changes to the IP address, hostname, DNS, Time Zone, and a few other fields will change your License MAC and invalidate all licenses.
Send an email to [email protected] asking them to rehost your license for the new license mac.
Tanner

Problem with itunes and iphoto after time machine restoration

After an apocalyptic type meltdown in my hardrive the other night, I now have a new one. I have restored as much as I had backed up using time machine when I turned my computer back on for the first time. However in iphoto it lists all the different albums I have, but all the photos come up as grey squares. They are definitely on the computer as you can see them in the iphoto originals folder in the finder window.
A similar problem with itunes. My itunes library is totally blank, with no songs whatsoever. However the songs are there in itunes music folder.
How can I restore everything back to normal?
Matt

Look at Q15 here. http://pondini.org/TM/FAQ.html
There are separate sections for iphoto and itunes.
It has to be so complicated because Apple made TM to do too much and be too many things to too many people.. a horse designed by a committee. It has become flakey in later editions.
If you still have the iMac you can move the files directly from the source.. you don't need to use TM backups at all.

CopyRights problem with "expires at the fixed time" uat mode

Dear all
I found a problem with rights parameter
When I use rights parameter in uat mode or umt mode
it can't be work with this two modes($uat and $umt)
and I found a document in adobe jp
the document says "only uat mode works well with expire function"
so I change the rgihts to uat
but it still has problem and does not work
this is part of my ASP VBS code
startTime=DateDiff ("s","1-Jan-1970",Date())
endTime=DateDiff ("s","1-Jan-1970",DateAdd("n" , 1 , Now()))
strQueryParams = oGBLink.AppendToQuery("bookid", pSku, strQueryParams)
strQueryParams = oGBLink.AppendToQuery("rights", "$uat#"&endTime&"#"&startTime&"$", strQueryParams)
strQueryParams = oGBLink.AppendToQuery("price", CStr(pPrice), strQueryParams)
....and more
is there any problem with my code??

I don't see a problem with your code. You might put in a print statement and make sure that strQueryParams contains what you're expecting.
When you're testing, are you using the same book more than once? If so, ACS can get confused about which voucher to use and use an old one.
- either use a different book each time
- or after each test, reset Acrobat or Reader on your test download machine. Adobe has a KB article:
http://support.adobe.com/devsup/devsup.nsf/docs/53857.htm

Problem with currency translation and variable time ref. with 0FISCPER

Hello,
We have a problem with a currency conversion with a variable time reference (as iobject we use 0fiscper)
We created a currency conversion for several key fig:
Our settings:
Exchange rate Type: EURX
dynamic ex rate determination
Source cur from datarecord
Fixed Target Curr (EUR)
Variable time ref.: End of Period
Special Infoobject: 0fiscper
When we run the DTP we get the following error:
<i>Enter rate GBP / EUR rate type EURX for 00.00.0000 in the system settings.</i>
ending the DTP in a message type X.
In table TCURR and T009/T009B all necessary information is available.
After debugging the function module, it looks like the created date (created from the FISCPER) is set to 00.00.0000. This results in the error above.
Does anybody have experience with this error and more important know how to solve it?
We also have a 0FISCYEAR available but in the TCURR table al rates are defined per end of the month. When trying to use 0FISCYEAR as InfoObject in the variable time reference, a diffrent error occurs: Enter rate GBP / EUR rate type EURX for 01.01.1001 in the system settings. While the 0FISCPER is 2001001.
Is there a bug in the function module? (couldn't find a SAP note)
We are working with BI 7.0 and SP12
Best regards
Steven

Please can you give more detail on how you were able to resolve this issue? How did you add 0fiscper to the transformation? I am on BW 3.5, how do I fix this same issue on it? Please help, this is urgent.

Problem with 'Filling Space' described in Tim's Blog

Dear Experts,
I am using the Invoice Template described in the excellent Blog by Tim Dexter (Anatomy of a Template) to produce my own version. However, I am having problems with the 'Filling Space' described here: http://blogs.oracle.com/xmlpublisher/2007/03/anatomy_of_a_template_ii_heade.html
My template is almost identical to the example, when I import XML data where there is only one record, the Filling Space does not pad out with enough empty rows so that the Total table is not at the bottom of the page, aligned with the watermark that I have. The code in the 'Filling Space' field is as in the Blog:
<?if:not(count($invLines) mod $lpp=0) and ($start+$lpp>count($invLines))?><?for-each:$invLines?><?if:position()<$lpp - (count($invLines) mod $lpp)?>
If the number of records is greater than half a page or more, then the padding is correct. This is even if, say on the third page there is just one record. Therefore, it seems the padding does not work if the number of records are less than half a page in total.
Is this correct and does anyone have a solution - would be greatly appreciated.
Many thanks,
Mark

"If the number of records is greater than half a page or more, then the padding is correct. This is even if, say on the third page there is just one record. Therefore, it seems the padding does not work if the number of records are less than half a page in total."
This statement is wrong.
Leave the if conditions logic,
This is how it works,..
xml contains 43 rows...
each page you need 10 rows..
after every 10th rows [using position mod 10 ,] , you put a page break...
if the mod returns greater than 0, that means row filler has to come into effect now.
what is the logic now to have row fillers is , 10 - 3 [position mod 10] , comes to 7... so seven blank rows should be inserted..
this is how , it works...
so the statement, saying, less than half of page, or something, wont come into this :).
http://winrichman.blogspot.com/2008/09/limit-row-per-page.html

Mayor Problems with new installation / restoring from time machine

I encountered several problems while setting up my mac mini, 1,66 Ghz, 60 GB from the start. The following problems occured:
1.) Installing 10.6 upon existing 10.6.4 caused scanner driver to fail. I was unable to reinstall it, so i decided to reinstall 10.6. from the start
2.) clean install of 10.6., after finishing i could not install iWorks. There was an error like "com.apple.installer.pagecontroller" ant installation terminated. With MS Office 2004 I had a problem, too: An error with _ds.store occured, I could not even copy the files to my harddisk. I thought, it might be the optical drive, so i took an external one which caused the same problems. I proceeded to 10.6.4 by update, but that did not make it better.
3.) next clean install (two tries wirth different backups) by my backup from time machine. It worked until it rebootet. I ended in a blue screen with every now and then the rotating cirlce, but could not proceed any further.
4.) tried to repair rights hat no effect. The harddisk is reportet to be functional.
5.) Back to the roots, i thought, installing 10.4. which came on the grey disks with the mini. I encountered the same problems after installing, furthermore, on trying to install flash 10.1 it could not open the .dmg-file.
6.) Installed Win XP. All seems funktional.
So, please, can anyone tell me, what is wrong with my mac mini? to me, it seems to be a problem with hardware, but i cannot verivy this. Please help me.

MathiasLeopold wrote:
3.) next clean install (two tries wirth different backups) by my backup from time machine. It worked until it rebootet. I ended in a blue screen with every now and then the rotating cirlce, but could not proceed any further.
Did you use a Leopard Install disc to restore a Snow Leopard backup? If so, that's the problem. You must use a Snow Leopard Install disc to restore a Snow Leopard backup.
If you did use the right disc, were you restoring backups from the same Mac?
If so, were you having problems before all this started? If you were, it's possible those problems corrupted your installation of OSX, and that was copied to the backups.
So, please, can anyone tell me, what is wrong with my mac mini? to me, it seems to be a problem with hardware, but i cannot verivy this. Please help me.
Try running this: Intel-based Macs: Using Apple Hardware Test

HT201209 i have problem with my billing information, every time when i want buy app from app store, he told me go to purchase history , i don't know how i fix this problem, so please help me

Dear
I Have a problem with purchases , where , when i wanna buy a game from app store (Using VISA), he told me : your billing information was decline,
So Please i need your support to solve the problem quickly
Thanks
Ali Altalabany

Try rebooting the iPad one more time. Try using recovery mode again and if that still doesn't work, make an appointment at an Apple Store and ask for their help.
iOS: Unable to update or restore - Apple - Support

Problems with firing a cluster 2nd time

Similar Messages

Maybe you are looking for