Problems with flash after installing studio 8

I have used firefox for months now with no problem.
My web site has an intro page that is flash. I installed studio 8
and now the flash won't work. What happened. I works on my laptop
with IE and no studio 8. suggestions. I've tried uninstalling, but
not sure if I ever got it uninstalled... in fact some of the
programs never let me have the choice to uninstall. I reloaded
firefox... nothing seem to be working ... Help

Faith Coach;
What version of the flash player did you have installed in
firefox
previous to installing studio 8? The only cause for a site to
fail in
firefox after installing the studio that comes to my mind is
that the studio
installation updated your flash player and your site has
issues with that
version of the player. If that is the case, you would need to
look into what
is causing the site to fail in more recent versions of the
player since your
site visitors may also be experiencing this problem--rather
than looking for
a problem on your system. Posting a url to your site would
allow others here
to test it--helping to determine whether the problem is
specific to your
system.

Similar Messages

Problem with MSIE after installing Flash Player with sysprep

Hello,
do you have any news regarding this problem?
I installed flash ver 11.6 and I have the same problem on more than 50 machines.
please let me know

I've branched this to a new discussion. The issue in the previous thread has already been resolved. Also, we would highly recommend that you deploy the latest version of Flash Player (11.7.700.169 as of today), as previous versions have known vulnerabilities.
First, make sure that you're not running into the ActiveX filtering problem:
Enabling Flash Player in Internet Explorer - http://forums.adobe.com/thread/885448?tstart=0
ActiveX Filtering in Internet Explorer 9 - http://forums.adobe.com/thread/867968?tstart=0
After that, make sure that your users actually have permission to run the Flash Player binaries.
If that looks good, try installing Flash Player the same way, but on a machine that has stock Group Security Policies (your PDC may be pushing down rules that cause Flash Player not to work).
If you're still stuck after that, we'll help you troubleshoot it further.
Thanks.

Problems with Flash after Froyo OTA update

Hey all, got the Froyo ota last night, everything went smooth.
After testing Flash, I would receive a message stating that Flash was not installed. If I check 'all' under managed applications I can see that Flash is installed, but still no luck. I went to the market and downloaded/installed the Flash 10.2 update...still no luck.
I've done the obvious things already, rebooted/battery pulled phone, uninstalled Flash update, tested again, reinstalled update, tried different browser etc etc but still no luck. I've checked other threads and forums and doesnt appear other folks are running into this issue....anyone else out there run into this problem at all? thanks.

My friend has the same phone and her flash was working fine after the update... so we compared phones and settings. Everything was identical, her's worked, mine did not. Both of our 'enable plug ins' settings in the browser were set to 'off' - because hers worked i made the assumption that didn't need to be changed. Apparantly, that was my mistake...
After reading your reply, I decided just to go ahead and change it anyway. It's now working.... so not sure why her's works with the plug in set to off and mine didnt, but just happy its working now. So...thanks for the reply!~ much appreciated...

Has anyone experienced problems with Outlook after installing Mavericks?

Has anyone else experienced problems using Microsoft Outlook after installing Mavericks? The computer seems to want to continue reloading emails.

RobertRTillman wrote:
1. Apple has removed sync services in OS X Mavericks. Therefore, you cannot sync Outlook 2011 with Contacts or Calendar.
2. Apple has removed the ability to sync through iTunes in OS X Mavericks, so that, even if you use Contacts and Calendar on the Mac, you can only sync them with your iPhone through iCloud, thus exposing all your contacts and calendar information to the mercies of the Web.
3. Microsoft does not not support CalDAV and CardDAV in Outlook, so there is no way to sync directly through iCloud, except perhaps by setting up a Microsoft Exchange account.
4. Apple makes it extremely difficult (virtually impossible) to revert to a version of OSX that is earlier than OS X Mavericks once Mavericks is installed.
In short, we are screwed and neither company seems to care.
In fact Microsoft does support Cal and CardDav in Outlook, just not in the Mac version of Outlook.
Reverting back from Mavericks requires nothing more than a backup of the system to restore from, if you do not elect to make backups that is a choice, but I would venture that it is a bad choice.

Problems with iWeb, after installing Lion

Hi,
Ever since I installed Lion, I have been having problems with iWeb. Any changes I make in iWeb, and then publish to my site, via mobileme, are not saved, and the site reverts to the orignial site, after closing the website, and iWeb also loses the cahnges. I am unable to sue the Publish Site button, and the option for Publish Site changes is not available.
I am using iLife 11.
These problems have only occurred since I installed Lion.
Any help greatly appreciated.
Nozza

In Lion the Library folder is now invisible. To make it permanently visible enter the following in the Terminal application window: chflags nohidden ~/Library and hit the Enter button - 10.7: Un-hide the User Library folder.
For opening your domain file in Lion or to switch between multiple domain files Cyclosaurus has provided us with the following script that you can make into an Applescript application with Script Editor. Open Script Editor, copy and paste the script below into Script Editor's window and save as an application.
do shell script "/usr/bin/defaults write com.apple.iWeb iWebDefaultsDocumentPath -boolean no"delay 1
tell application "iWeb" to activate
Just launch the application, find and select the domain file you want to open and it will open with iWeb. It modifies the iWeb preference file each time it's launched so one can switch between domain files.
You can download an already compiled version with this link: iWeb Switch Domain.
WARNING: iWeb Switch Domain will overwrite an existing Domain.sites2 file if you select to create a new domain in the same folder. So rename your domain files once they've been created to something other than the default name.
OT

Serious wifi problems with iMac after installing Mountain Lion

After installing Mountain Lion, I'm experiencing serious trouble with wifi. I noticed that some people had this before with Lion. Can anybody help to solve this problem or should I downgrade to Mountain Lion?
Please help
Thanks in advance!

Thank you for the information Arizonadonn! I'll install 10.8.1 this evening. I really hope you're right after having connection troubles for almost a month now .
If this solves my problem, you'll be my hero !

Problem with chess after installing Leopard

The other week I did an Archive and Install of Leopard on my MacBookPro running Tiger. Several applications failed to work following the install and this has been solved by downloading new versions. Although chess seems to be more problematic. Every time I launch chess I just get a message saying that chess has unexpectedly quit. However this behaviour is starting to become expectable. I have read other posts reporting similar problems after installing Leopard however they are able to play a couple of moves before it quits. For me chess does not even launch.
I have tried trashing the preference file, creating and using a new user account, and copying chess from another computer. The copied application just states that I can not use chess with this version of OSX.
Does anyone have any ideas as I really do not want to have to reinstall Leopard just for a application I only use when very bored (which is surprisingly often).
Thanks for any help you can give.
Chuck

Thanks for pointing out that app. Very useful indeed.
I have deleted my copy of chess and reinstalled a new copy from the OSX Leopard install disk and it still fails to launch.
Any other ideas?

Problems with MBP after installing smcfancontrol

I decided to install smcfancontrol because the computer was getting a bit hot after installing extra ram. Right after installing the software I encountered problems. It was not responsive and when it does, the fans would stay at its minimum rpm even after heavy load. I uninstall the software and the problem is still there. Fan's rpm will not increase as temperature rises.
I experimented by booting into windows and ran a game and I noticed that the fans were going faster. But when I reboot back into os X it doesn't reboot at all, I get the boot sound but it doesn't load and the screen is dark. I would have to press the power button to shut it off and turn it on again. I then decided to reinstall os X and to my dismay, the problem is still there!
Any Suggestions?

booted with install cd, ran the hardware diagnostic program and everything came out good. The fans rpm was higher as I was running the diagnostic program. I assume that firmware is not corrupted and it has more to do with the OS. Btw, is it normal for the computer to run at 60c and have the fan run at around 2000rpms? Is it possible to have some traces of the old OS left after a fresh install?
Edit: I got the computer to run in heavy load and after the cpu temp got to 65c the fans started kicking in. Guess it's back to normal. I was used to seeing the fan start running faster at around 60c
Message was edited by: ovejon

Problem with MMC after installing ARGO

Hello,
after installing ARGO I got in trouble with my Microsoft SAPMMC control panel. It does not working properly anymore. The MMC is not reponding when clicking yes for the question of converting the data to the new mmc version.
I have already installed one portal NW04s and three portals NW04.
Has anyone an idea how to solve this issue?
Thanks.
Best Regards,
Olaf Reiss

Hi Olaf,
maybe there is something wrong with your sapmmc.msc configuration. You can try to create a new one by following these steps:
Start mmc.exe
Choose File -> Add/Remove Snap in... -> Standalone tab -> Add...
Select SAP Systems Manager
Place a checkmark into all checkboxes in the General Settings window and select Use fixed SAP Instance list. Press Next
Select Remote Administration Communication Security level "Low" and press Next
Press Finish
If this does not help, you could try switching off Always show local SAP instances at the fourth step above and add the instances manually in the Fixed instance list (last step).
Finally, save your new MMC configuration.
Hopefully this solves the problem.
Regards,
Dirk
Message was edited by: Dirk Teufel

Problem executing programs after instaling Studio 8.1

I had JDK 1.5 installed on my computer. I earlier used to code my programs either in a text-editor or JCreator & run them from the command prompt.
I recently installed Studio Enterprise 8.1. My programs execute successfully from the IDE. They also complie successfully from the command prompt. But whenever I try to run them now from command prompt or JCreator, I always get a
Exception in thread "main" java.lang.NoClassDefFoundError: <class name>
exception. Even when I am not using packages & the programs being run reside in the current directory only, where java.exe resides.
Can somebody help me????

The last few lines of the output are as follows:
[Loaded java.util.zip.ZipFile$2 from shared objects file]
[Loaded java.util.zip.Inflater from shared objects file]
[Loaded java.lang.Math from shared objects file]
[Loaded java.security.PrivilegedActionException from shared objects file]
Exception in thread "main" java.lang.NoClassDefFoundError: sample
[Loaded java.lang.Shutdown from shared objects file]
[Loaded java.lang.Shutdown$Lock from shared objects file]
There was a whole series of Loaded module above these, from which I could not figure out any problem.

Problems with safari after installing Windows 8

After installing Windows 8 , i can't access some websites in Safari
For example i can't login on Binck bank or a webshop
After fill the login details the program file runs , but the login screen remain and the login details diappaers and gone white.
This is on a few websites where i have to use login details but on others such as webmail acounts it works normal.
I have set up safari again and again without succes
What can i do to solve this?

Use IE, FireFox, or Chrome and see if the problem remains. My experience is that Safari has never worked well on Windows.

Anyone else having problems with Mail after installing Mountain Lion?

Since upgrading to mountain lion, I have had a number of problems with Mail. At the moment, it is predominantly when my desktop imac goes to sleep overnight. In the morning, it will not receive mail. The app will not close, so I force quit it. Trying to reopen Mail after that just does not happen, so I have to restart my machine to get things going again. Any tips?

If 10.7.0 or later...
Bootup holding CMD+r, or the Option/alt key to boot from the Restore partitirion & use Disk Utility from there to Repair the Disk, then Repair Permissions.
If that doesn't help Reinstall the OS.

Problems with Recordset after install MX Site Search extension

Hi guys,
After install the MX Site Search extension in my Dreamweaver
8, i can't create Recordset. I press the button and nothig is
happen. I already uninnstall the extension, dreamweaver and
continue same problem.
Please i need fix this problem.
Help me!

Sounds to me like the extension overwrote the Dreamweaver
recordset code.
Extension developers should never never do that .. but a few
do
unfortunately.
If you're on a windows machine, try going to C:\Documents and
Settings\yourname\Application Data\Macromedia\Dreamweaver 8\
and throw away
the User Configuration folder. The next time Dreamweaver is
opened, it will
generate a new User Configuration folder for you (make sure
you have your
extensions saved somewhere as it will be a clean
configuration folder) and
you should be all right.
If the main recordset code was overwritten, you will have no
choice but to
uninstall DW8 and reinstall it from a CD or fresh download.
Nancy Gill
Adobe Community Expert
BLOG:
http://www.dmxwishes.com/blog.asp
Author: Dreamweaver 8 e-book for the DMX Zone
Co-Author: Dreamweaver MX: Instant Troubleshooter (August,
2003)
Technical Editor: DMX 2004: The Complete Reference, DMX 2004:
A Beginner's
Guide, Mastering Macromedia Contribute
Technical Reviewer: Dynamic Dreamweaver MX/DMX: Advanced PHP
Web Development
"Leandro Cunha" <[email protected]> wrote in
message
news:e1rflk$aar$[email protected]..
> Hi guys,
>
> After install the MX Site Search extension in my
Dreamweaver 8, i can't
> create Recordset. I press the button and nothig is
happen. I already
> uninnstall
> the extension, dreamweaver and continue same problem.
>
> Please i need fix this problem.
>
> Help me!
>

Problem with Word after installing Maverick

After installing Maverick word for Mac is not able to be open. Excell & PowerPoint works without problems. According to local Apple store it's a common problem and I should wait for an update from Microsoft. Does anyonwe faced the same issue ?

You'd have the same version of Word since the MS updates update all MS Office apps.
The only thing that I can suggest is to take your question to the MS Office 2011 Mac forums -> http://answers.microsoft.com/en-us/mac.
That's where I'm headed to complain about my font problems!
Clinton

Problems with Finder after installing 10.5.8

After upgrading to 10.5.8 update, couple of very basic things are not working correctly in Finder..
1. Pressing Cmd+A from keyboard no longer does a select all. However, doing same by clicking menu option works. This is not a problem with my keyboard because pressing cmd+A works fine in other applications like TextEdit.
2. Unable to type anything into the search bar embedded in Finder window. However, searching by clicking the spotlight magnifying glass icon still works.
Anyone else having same problems? Any way to fix these issues?

The problem seem to have resolved automatically after system reboot. (p.s. The system had already rebooted after the update). If the problem repeats, I will run the disk utility and see if it helps.

Problems with flash after installing studio 8

Similar Messages

Maybe you are looking for