Problems with Flip Words Game after recent ios upgrade on my iPad2

After I installed the latest version of ios on my ipad2, the font type has changed and now my Flip Words game is not able to be played because of a new black border across the top of the game screen showing my ipad wifi signal, time and battery status.
How can I get this removed, or back load to the previous version of the ios software?
Current version is: 7.1.(11D167)

Hi billfrombowie,
If you are having issues with one of your apps after updating to iOS 7.1, you may find the following article helpful:
iOS: An app you installed unexpectedly quits, stops responding, or won’t open
http://support.apple.com/kb/ts1702
Regards,
- Brenden

Similar Messages

  • Problem with Facebook and instagram after istalling iOS 7.1. Can not open them!

    Problem with Facebook and instagram after istalling iOS 7.1. Can not open them!

    Hi Hanjon!
    Here is an article that will help you troubleshoot these purchased apps:
    iOS: An app you installed unexpectedly quits, stops responding, or won’t open
    http://support.apple.com/kb/ts1702
    Thanks for being a part of the Apple Support Communities!
    Regards,
    Braden

  • Sync problems with 3gs and itunes after update iOS 5.0

    I am using a Vista PC with iTunes10.5. After updating my 3gs to iOS 5.0 I am not able to sync the phone. iTunes recognizes my iphone and then stays syncing at the backup stage....I deleted all my apps on the phone and deleted previous backups and tried syncing again, but in vain. I am clueless....

    I just plugged it into my netbook and its Restoring it on there so thanks, I know I will lose what I never had backed up but just be happy if it works. Fingers crossed this fixes it.
    Edit: It didnt work, come up with iTunes isnt connected to the internet then the restore fails

  • Problems with iWS6.0 SP4 after JDK change / upgrade

    Solaris8 SPARC
    iPlanet 6.0 WebServer SP4
    I recently upgraded from JDK 1.3.1_02 to JDK 1.3.1_07 .
    In both cases .... the JDK was installed at /usr/j2se.
    iPlanet 6.0 SP4 was already using JDK 1.3.1_02 before ( /usr/j2se ).
    Now after the JDK upgrade, in an attempt to restart the admserv. I am getting the exception below:
    iPlanet-WebServer-Enterprise/6.0SP4 B07/17/2002 14:04
    warning: daemon is running as super-user
    [LS ls1] http://soft2, port 8888 ready to accept requests
    java.lang.NoClassDefFoundError
    at java.security.Policy$1.run(Policy.java:144)
    at java.security.AccessController.doPrivileged(Native Method)
    at java.security.Policy.getPolicyNoCheck(Policy.java:141)
    at java.security.SecureClassLoader.getPermissions(SecureClassLoader.java:133)
    at java.net.URLClassLoader.getPermissions(URLClassLoader.java:415)
    at sun.misc.Launcher$AppClassLoader.getPermissions(Launcher.java:289)
    at java.security.SecureClassLoader.getProtectionDomain(SecureClassLoader.java:157)
    at java.security.SecureClassLoader.defineClass(SecureClassLoader.java:106)
    at java.net.URLClassLoader.defineClass(URLClassLoader.java:243)
    at java.net.URLClassLoader.access$100(URLClassLoader.java:51)
    at java.net.URLClassLoader$1.run(URLClassLoader.java:190)
    at java.security.AccessController.doPrivileged(Native Method)
    at java.net.URLClassLoader.findClass(URLClassLoader.java:183)
    at java.lang.ClassLoader.loadClass(ClassLoader.java:294)
    at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:281)
    at java.lang.ClassLoader.loadClass(ClassLoader.java:250)
    at java.lang.ClassLoader.loadClassInternal(ClassLoader.java:310)
    The errors logs say:
    [04/Apr/2003:18:36:58] info (20837): successful server startup
    [04/Apr/2003:18:36:58] info (20837): iPlanet-WebServer-Enterprise/6.0SP4 B07/17/2002 14:04
    [04/Apr/2003:18:36:59] info (20838): Installing a new configuration
    [04/Apr/2003:18:36:59] info (20838): [LS ls1] http://soft2, port 8888 ready to accept requests
    [04/Apr/2003:18:36:59] info (20838): A new configuration was successfully installed
    [04/Apr/2003:18:37:00] failure (20838): Internal error: unable to locate: com/iplanet/server/http/util/LogUtil
    [04/Apr/2003:18:37:00] failure (20838): Internal error: Unable to initialize utility classes
    [04/Apr/2003:18:37:00] failure (20838): Late initialization failed: Error running init function(late) NSServletLateInit: unknown error
    The class com/iplanet/server/http/util/LogUtil is in NSJavaUtil.jar ... which is included in the CLASSPATH in the start-jvm file, show below:
    NSES_JDK=/usr/j2se; export NSES_JDK
    NSES_JRE=${NSES_JDK}/jre; export NSES_JRE
    NSES_JRE_RUNTIME_LIBPATH=${NSES_JRE}/lib/sparc:${NSES_JRE}/lib/sparc/server:${NSES_JRE}/lib/sparc/classic:${NSES_JRE}/lib/sparc/native_thread
    s; export NSES_JRE_RUNTIME_LIBPATH
    NSES_JDK_RUNTIME_CLASSPATH=${NSES_JRE}/lib/ext/iiimp.jar:${NSES_JRE}/lib/i18n.jar:${NSES_JRE}/lib/rt.jar:${NSES_JDK}/lib/tools.jar:${NSES_JDK
    }/lib/dt.jar; export NSES_JDK_RUNTIME_CLASSPATH
    # DO NOT CHANGE ANYTHING BELOW THIS LINE
    NSES_SERVER_HOME=/usr/iplanet/servers; export NSES_SERVER_HOME
    NSES_CLASSPATH=${NSES_SERVER_HOME}/bin/https/jar/NSServletLayer.jar:${NSES_SERVER_HOME}/bin/https/jar/NSJavaUtil.jar:${NSES_SERVER_HOME}/bin/
    https/jar/AdminNativeUtil.jar:${NSES_SERVER_HOME}/bin/https/jar/NSJavaMiscUtil.jar:${NSES_SERVER_HOME}/bin/https/jar/servlet.jar:${NSES_SERVE
    R_HOME}/bin/https/jar/servlet-2.3-filters-api.jar:${NSES_SERVER_HOME}/bin/https/jar/jsp092.jar:${NSES_SERVER_HOME}/bin/https/jar/jaxp.jar:${N
    SES_SERVER_HOME}/bin/https/jar/crimson.jar:${NSES_SERVER_HOME}/bin/https/jar/xalan.jar:${NSES_SERVER_HOME}/bin/https/jar/jspengine.jar; expor
    t NSES_CLASSPATH
    LD_LIBRARY_PATH=${NSES_JRE_RUNTIME_LIBPATH}:${LD_LIBRARY_PATH}; export LD_LIBRARY_PATH
    ...and the JAR file itself exists:
    soft2:/usr/iplanet/servers/https-admserv >ls -alt /usr/iplanet/servers/bin/https/jar/NS*
    -rw-r--r-- 1 root other 191337 Jul 17 2002 /usr/iplanet/servers/bin/https/jar/NSServletLayer.jar
    -rw-r--r-- 1 root other 2856 Jul 17 2002 /usr/iplanet/servers/bin/https/jar/NSJavaMiscUtil.jar
    -rw-r--r-- 1 root other 29941 Jul 17 2002 /usr/iplanet/servers/bin/https/jar/NSJavaUtil.jar
    Here I show that the class iPlanet is complaining is in the NSJavaUtil.jar file:
    soft2:/usr/iplanet/servers/https-admserv >jar tvf /usr/iplanet/servers/bin/https/jar/NSJavaUtil.jar | grep Log
    3403 Wed Jul 17 13:54:22 GMT+10:00 2002 com/iplanet/server/http/util/LogUtil.class
    502 Wed Jul 17 13:54:22 GMT+10:00 2002 com/iplanet/server/http/util/LogUtil$LogWriter.class
    If I modify the start-jvm file so that NSES_JDK points to an older version of the JDK ( /usr/Solaris_JDK_1.2.2_07 ) ... or a newer one ( /usr/j2sdk1.4.0_02 ) ... then the admserv instance starts up.
    Having said that, in an effort to try to replicate the problem, I tried the same JDK upgrade on another Solaris8 SPARC installation, also with iPlanet 6.0 SP4. That one worked fine with any problems. The admserv instance started fine after the upgrade.
    The only different thing that I did was:
    1) I first told iPlanet6 to point to a different JDK location ( JDK 1.3.1_03 in /usr/j2sdk1_3_1_03 ) before the upgrade ....
    2) restarted the admserv instance ...
    3) install JDK 1.3.1_07 ( /usr/j2se )
    4) told iplanet6 to point to the JDK 1.3.1_07 ( /usr/j2se )
    5) restart the admserv instance
    Why would it not work with one installation and not the other ?

    This maybe the final clue. I did a truss via:
    truss -f ./start -start 2&> err
    ... and this is what I get just before the NoClassDefFoundError exception ( look at the SIGSEGV ):
    22780: lwp_mutex_lock(0xFEBC5558) = 0
    22780: lwp_sema_post(0xFCE03E30) = 0
    22780: lwp_sema_wait(0xFCE03E30) = 0
    22780: lwp_mutex_wakeup(0xFEBC5558) = 0
    22780: lwp_mutex_lock(0xFEBC5558) = 0
    22780: Incurred fault #6, FLTBOUNDS %pc = 0xF900A8FC
    22780: siginfo: SIGSEGV SEGV_ACCERR addr=0xFE427F68
    22780: Received signal #11, SIGSEGV [caught]
    22780: siginfo: SIGSEGV SEGV_ACCERR addr=0xFE427F68
    22780: sigprocmask(SIG_SETMASK, 0xFEBBEFE8, 0x00000000) = 0
    22780: mprotect(0xFE424000, 16384, PROT_READ|PROT_WRITE|PROT_EXEC) = 0
    22780: sigprocmask(SIG_SETMASK, 0xFEBCAD68, 0x00000000) = 0
    22780: setcontext(0xFE42B938)
    22780: time() = 1049546821
    22780: poll(0xFD007A40, 0, 10) = 0
    22780: getpid() = 22780 [22778]
    22780: write(6, " [ 0 5 / A p r / 2 0 0 3".., 111)     = 111
    22780: lwp_sema_post(0xFCE03E30) = 0
    22780: lwp_sema_wait(0xFCE03E30) = 0
    22780: lwp_mutex_wakeup(0xFEBC5558) = 0
    22780: lwp_mutex_lock(0xFEBC5558) = 0
    22780: getrlimit(RLIMIT_STACK, 0xFFBEAFAC) = 0
    22780: mprotect(0xFFB72000, 16384, PROT_NONE) = 0
    22780: mprotect(0xFFB70000, 8192, PROT_NONE) = 0
    22780: poll(0xFD007A40, 0, 10) = 0
    22780: brk(0x004BB7F0) = 0
    22780: brk(0x004BD7F0) = 0
    22780: time() = 1049546821
    22780: getpid() = 22780 [22778]
    22780: write(6, " [ 0 5 / A p r / 2 0 0 3".., 93)      = 93
    java.lang.NoClassDefFoundError22780: write(2, " j a v a . l a n g . N o".., 30) = 30

  • Problem with first generation iPhone after 3.1 upgrade - HELP!

    Hey all!
    I'm wondering if any of you know how to help me out with this issue...
    I have a first generation iPhone 16GB and I recently upgraded to 3.1 software, but my sim card is not supported - so I need to downgrade. I've tried restoring, tried QuickPwn but no success with anything. It's stuck on the emergency call screen. By the way, my sim card isn't supported on 3.0 either, so I need to downgrade it to the original. I've been browsing the web all day trying to find a solution and nothing yet. If you can help, I'd appreciated it GREATLY!
    Thanks so much!

    hi spoon7,
    I am from dubai and got also the same problem as yours in my first generation iPhone when i updated my software to 3.1, absolutely the same the situation and experienced. My sim card now is not detected of my iphone and only emergency call on screen. So how can I put it back my old firmware version so that i can use again my iphone
    Any body can help us. pleassssssssssss.
    Thanks in advanced

  • I have problem with wireless print HP after iOS 7  !? What can i do

    I have problem with wireless print HP after iOS 7  !? What can i do?!  

    Tap Settings / General / Reset / Reset Network Settings if your having a problem with your network. If you have another problem go to the same place in "Reset" and just reset all settings

  • I have been having problems with my speaker. After the recent update I am unable to listen to movies or music using my speaker. The volume bar is completely missing. If I plug a headset into the port, the volume bar reappears.

    I have been having problems with my speaker. After the recent update I am unable to listen to movies, music or apps using my speaker. The volume bar is completely missing. If I plug a headset into the port, the volume bar reappears and then disappears after the headset is removed. This is quite annoying. My child's Apps that he likes to play will not even make a sound. HELP!!!

    Do a reset (Hold Sleep/Wake and Home buttons about 10 secs or more till Apple logo appears, ignore the Slide to Power Off that appears)
    Note: You will not lose any data.

  • I have a problem in the Bluetooth headset after updating iOS 7

    I have a problem in the Bluetooth headset after updating iOS 7

    Hi,
    have a similar problem here. More specifically, I am using a Plantronics Voyager Legend (brand new) with my Iphone5 (iOS 7.0.2). All apps are working great with the headset, e.g., listening to music, normal phone calls, etc. No sound distortion at all.
    When I use Skype (most recent version, which is 4.12.258) the sound is very distorted, like scattered. I also successfully used the same headset with a Samsung Galaxy S3 and Skype. No problems. So, I suspect that it must be the combination of Iphone/iOS7 and Skype which messes up the sound.
    Does anybody else have the same problem when using that combination of devices and apps?
    Best,
    Kurt

  • I have started getting spammed on multiple Apple products (iPhone and iPad) with FaceTime calls since the recent IOS update.  Is there any feature or sedtting I can use locally to restrict incoming calls to FaceTime without going to the carrier?

    I have started getting spammed on multiple Apple products (iPhone and iPad) with FaceTime calls since the recent IOS update.  Is there any feature or setting I can use locally to restrict incoming calls to a FaceTime account without going to the carrier?

    After calling AT&T tech support one more time, and explaining to them that the glitch was on their network, they admitted that the problem was at their tower...
    I continued to use the phone on EDGE mode for two more days until the problem was fixed.
    I even got a call back from a tech support guy asking me if my phone was working properly....
    I wish they would have admitted to the problem before I sat at the apple store for 2 hours.

  • Since updating Firefox I have problems with playing Zynga games

    since updating Firefox I have problems with the Zynga games I am playing. The functions often stop working so I have to reboot the game. Also there are often a lot of items missing on my screen so I can't play at all

    I have this problem, as well, since the upgrade to 4.0.1. After the upgrade, I found several 'Recovered Files' in my Trash. On taking a look, they all had to do with the Crowdstar app. Happy Aquarium, I believe, but there are several folders of them. Some of them could have to do with Zynga's FarmVille.
    However, after repeated problems, I installed Chrome 10. to see if the Facebook apps. would work. They did, without problems. That tells me the folders in Trash shouldn't have anything to do with whether they operate or not but it has something to do with something Firefox has done, or not done, with this upgrade. Frankly, I'm baffled and more than a little annoyed. :/
    However, thinking back to the upgrade, it happened suddenly while I was on the phone with AppleCare on another matter. It was they who suggested I needed to upgrade my browser and I did it immediately, on-the-spot. It wasn't what you would call a 'clean install' because I was on the phone but also online with AppleCare. The process went so fast, I remember there were things about the installation that didn't quite seem right and I do remember that the earlier version of Firefox was not removed prior to the upgrade. Is there any chance something could be out-of whack because of this? If so, I need to know how to save my passwords, bookmarks, profile, and any other critical info that would need to be transferred.

  • TS1398 I have problems with my wifi connection after update the ios6 any advice

    I have problems with my wifi connection after update the ios6 any advice

    iOS 6 Wifi Problems/Fixes
    Fix For iOS 6 WiFi Problems?
    http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
    Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
    http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
    How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
    http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
    iOS 6 iPad 3 wi-fi "connection fix" for netgear router
    http://www.youtube.com/watch?v=XsWS4ha-dn0
    Apple's iOS 6 Wi-Fi problems
    http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
    ~~~~~~~~~~~~~~~~~~~~~~~
    Look at iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    WiFi Connecting/Troubleshooting
    http://www.apple.com/support/ipad/wifi/
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    Additional things to try.
    Try this first. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    If none of the above suggestions work, look at this link.
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
    Unable to Connect After iOS Update - saw this solution on another post.
    https://discussions.apple.com/thread/4010130
    Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
     Cheers, Tom

  • Is anyone else having problems with there phone freezing after the 8.0 update?

    iis anyone else having problems with there phone freezing after the 8.0 update??

    Hello Chefboyharley,
    Thanks for the question. After reviewing your post, it sounds like the phone is unresponsive. I would recommend that you read this article, it may be able to help you resolve or isolate the issue.
    iOS: Not responding or does not turn on
    Thanks for using Apple Support Communities.
    Have a nice day,
    Mario

  • Having problems with Bridge shutting down after saving photo in PS Cs5,,,,,,,,,  Also when i attempt to update either PS or bridge get an error message in Adobe application manger "Error loading updater workflow"

    Having problems with Bridge shutting down after saving photo in PS Cs5,,,,,,,,,  Also when i attempt to update either PS or bridge get an error message in Adobe application manger "Error loading updater workflow"

    Sorry for the late reply. My email firewall has become a little over zealous & sent a lot of my emails straight to my junk email folder, so I have only just now discovered your reply in my junk mail folder.
    The only "don't open files exceeding xxx megabytes" instruction I can find in my Prefs, is in the Bridge Prefs for Thumbnails, & mine is set at 1000mb. The biggest files I handle are bigger than 200mb so I should be able to open a few, not just one.
    However, this doesn't explain why I can open a psd format file of 180mb, close it, but then can't open a RAW format file of only 26mb immediately after.
    I can open the RAW file only if I restart my computer - very annoying!
    However, thanks for the advice about the video card & memory.
    So, I'm still stuck as to what the issue is.

  • Problem with Rescue and Recovery after installing Norton Internet Security 2010

    Hi all.
    It's my first time in this forum.
    I have a problem, with Rescue and Recovery, after installing Norton Internet Security 2010 on my T43.
    The message I get it:
    "Rescue and Recovery is unable to back up the file 'C:\Documents and settings\all Users\Application Data\ Norton\ 00000082\00000109\000003c1\cltMLS1.bat' Because the file is either corrupted or being used by another application. Please close any application that could be using the file.
    I tried to close the Norton but I couldn't find how.
    Tanks
    Doron71

    Hi and welcome to the forum,
    the reason for this situation is, that the antivir files are protected from being modified.
    This is the reason, why this file cannot be backed up. I assume, that you would get much more such messages, as there are surelly multiple files files, that are protected like this.
    So the solution is to block folders from being archived. Please start RnR application and in the configuration set this folder as the excluded one.
    This will skip the backup of this file and will fix your situation.
    Please let me know, if you have covered this.
    Cheers

  • Problem with flash on IE11 after using adobe cleaner

    Problem with flash on IE11 after using adobe cleaner to remove a trial version of photoshop because there was not any entry on add/remove applications in windows 8.1
    Its to frustrating to reinstall everything. I tried everything from your support page with no luck…

    Link for Download & Install & Setup & Activation problems may help
    -Online Chat http://www.adobe.com/support/download-install/supportinfo/

Maybe you are looking for