Problems with FPLVMgr.dll in Windows NT

I have an application that works beautifully in Windows 98, but when loaded onto NT, I get an error message that says: "The application or DLL C:\P2100\program\FPLVMgr.dll is not a valid Windows NT image. Please check this against your installation diskette." I have this file located in the above directory, and also in the FieldPoint directory. I am using FieldPoint explorer 3.0, and Labview 4.0. What's the problem here?

Try placing this file in the \WINNT\system32 directory. The builder does not automatically include this file or install in on the new machine.

Similar Messages

Problems with shutdown, expose and window switching

Hi there,
Recently I've been having a few issues with OS X. First of all it wasn't shutting down properly -- the menu bar would disappear and it would look like it was going to shutdown, but it never did. I could move down to the dock (on auto-hide) and it would re-appear, at which point I can bring up a terminal window and use 'shutdown' to do the job. On startup I'd reset the PRAM, and then do a disk-check, but the problem keeps coming back.
Subsequently, I've also been having problems with expose and switching windows (i.e. command-tab). Namely, neither of them work. Expose won't fire from either hot corners or the keyboard, and if I re-launch the app from the Apps folder (without trying to kill it first, I should say), it does nothing. Cmd-tab gets interpreted as just tab, and the keyboard shortcut for dashboard also fails (although I can start the dashboard from the dock).
I read in another post about an invalid jpeg in the downloads folder being able to cause the Expose problem (seems like a most unlikely bug?). Anyway, I cleared all pictures from my downloads folder and functionality came back, but now it's gone again. It's really very frustrating as it makes moving between windows a lot more hassle.
Any thoughts would be gratefully received.
TIA,
Mat

This sounds interesting.
Can you post a copy for the rest of us to see?
As for actually helping you, and not just satisfying our curiousity, if you start cutting pieces of the code you will probably end up finding the source of the problem (and we won't have too big a program to handle). Since DSC is a likely suspect, you may want to start there.
Also, are you creating an installer and using that to install? If not, you may wish to try that.
Try to take over the world!

Problem With Captivate 4 and Windows 8

Hi,
I've a problem with Captivate 4 on Windows 8 projects :
The mouse is not tracked.
I've applied the last patch for this version (11/15/2011).
Is there another patch for this ?
Thanks a lot.

Hi there
I know this will come off as sounding snarky, but please know it's honestly not intended that way,
Windows 8?
I never was able to make Captivate 4 run successfully on Windows 7. So I'm not the least bit surprised to hear it has issues with Windows 8!
Personally, I'm thinking you are due for an upgrade to Captivate if you want it to work on Windows 8. But then again, I'm not even certain if Captivate 6 is Windows 8 compatible.
Cheers... Rick
Helpful and Handy Links
Captivate Wish Form/Bug Reporting Form
Adobe Certified Captivate Training
SorcerStone Blog
Captivate eBooks

Problem with photshop cc on windows 8.1 and 4k monitor at 3840x2160 resolution

can anyone help
i have a problem with photshop cc on windows 8.1 and 4k monitor at 3840x2160 resolution when i lauch photoshop cc everything is very small and i dont know how to get the program at the right size

Search the forum for similar topics dealing with high-DPI displays. 4k is insane, though. I don't think even CC 2014 is up to it.
Mylenium

I have bought Adobe Photoshop Elements 10 last August 2013 and having problems with installing it on Windows 8.1?

I have bought Adobe Photoshop Elements 10 last August 2013 and having problems with installing it on Windows 8.1. Why am I having this problem?

You can check you Adobe account online to see if the serial number is registered under your account. If not then your only option will likely be to contact Adobe Support directly thru chat to see if they can provide you with a/the serial number. For them to do so will require you being able to prove ownership.
Serial number and activation chat support (non-CC)
http://helpx.adobe.com/x-productkb/global/service1.html ( http://adobe.ly/1aYjbSC )

Problem with national characters on windows client

Hello there,
I'am having problem with national characters on windows client.
All national data stored in NVARCHAR2 colums, applications (.net) works fine,
but in sqlplus:
select city from test_table;
- everything ok, sqlplus shows national characters
select dump(N'<national symbols>') from dual
- returns
Typ=96 Len=12: 0,191,0,191,0,191,0,191,0,191,0,191
select * from test_table where city = N'<national symbols> '
- always returns nothing
As i understand the problem in
sql query text (and national literals) convertion
to servers "WE8ISO8859P1" encoding, Is it possible
to solve the issue?
Thanks in advance
PS.
Console in right mode (chcp=1251)
sqlplus shows russian messages well
Server (oracle 9 on solaris):
select * from nls_database_parameters
NLS_NCHAR_CHARACTERSET AL16UTF16
NLS_SAVED_NCHAR_CS WE8ISO8859P1
NLS_LANGUAGE AMERICAN
NLS_TERRITORY AMERICA
NLS_CURRENCY $
NLS_ISO_CURRENCY AMERICA
NLS_NUMERIC_CHARACTERS .,
NLS_CHARACTERSET WE8ISO8859P1
NLS_CALENDAR GREGORIAN
NLS_DATE_FORMAT DD-MON-RR
NLS_DATE_LANGUAGE AMERICAN
NLS_SORT BINARY
NLS_TIME_FORMAT HH.MI.SSXFF AM
NLS_TIMESTAMP_FORMAT DD-MON-RR HH.MI.SSXFF AM
NLS_TIME_TZ_FORMAT HH.MI.SSXFF AM TZH:TZM
NLS_TIMESTAMP_TZ_FORMAT DD-MON-RR HH.MI.SSXFF AM TZH:TZM
NLS_DUAL_CURRENCY $
NLS_COMP BINARY
NLS_LENGTH_SEMANTICS BYTE
NLS_NCHAR_CONV_EXCP FALSE
NLS_RDBMS_VERSION 9.2.0.6.0
Client (windows server 2003, oracle client 10):
NLS_LANG = RUSSIAN_CIS.CL8MSWIN1251

N'<national symbols>', being part of an SQL statement, will be converted to the database character set (WE8ISO8859P1) before being parsed. Only if the client and the database are both 10.2 or higher, the client can encode the literal appropriately so that it survives this conversion.
In earlier versions, you can do the encoding yourself. Instead of the N'<national symbols>' literal use the UNISTR function: UNISTR('\xxxx\yyyy\zzzz'), where U+xxxx, U+yyyy, U+zzzz are Unicode code points of your national characters.
-- Sergiusz

Problem with the audio editor window into logic pro X

hello everybody, I have a problem with the audio editor window ! the "onglet" (sorry I don't know the word in english) "file and track" doesn't appear in the top of the audio editor window ! I can just make no destructive data, I have no access to Normalize and others audio fonctions ! could you help me ? in advance I thank you
Alain

'onglet' - great, my favorite when visiting restaurants in France!
Anyway, I think you have to activate Advanced tools first:
http://help.apple.com/logicpro/mac/10/#lgcp5cbf192f
Have a nice day!

I have problem with data transfer between Windows Server 2012RT and Windows7 (no more than 14kbps) while between Windows Sever 2012RT and Windows8.1 speed is ok.

I have problem with data transfer between Windows Server 2012RT and Windows7 (no more than 14kbps) while between Windows Sever 2012RT and Windows8.1 speed is ok.

Hi,
Regarding the issue here, please take a look at the below links to see if they could help:
Slow data transfer speed in Windows 7 or in Windows Server 2008 R2
And a blog here:
Windows Server 2012 slow network/SMB/CIFS problem
Hope this may help
Best regards
Michael
If you have any feedback on our support, please click
here.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

XML fetch failed -- possibly a problem with AvXml.dll or its permissions

When attempting to access the Status Monitor I receive the following error message:
XML fetch failed -- possibly a problem with AvXml.dll or its permissions.
Check that the "AvXml" virtual directory settings in IIS have proper permissions and allow execute access.
I've tried all combos of security on the IIS directory. What am I missing?

Hi Lindborg
I have that problem with version 4.0 (X), it is due?, As I fix?.
Unity I have a failover cluster, I have several problems, sometimes not let me delete mailbox, I can retrieve messages.
thanks for any help you can provide.
Regard

Has anyone else had problems with their RAW editing window?

I'm having real problems with my RAW editing window (the one that automaticaly pops up when you open a raw file). I've opened several images, but when I click on the different thumbnails on the left hand side the large preview image in the center doesn't change. Obviously I need to be able to see this to make the required changes.
Any ideas/help you be greatly appreciated!!!

Hi Kate,
I haven't yet been able to replicate your problem. Will you please describe your workflow? Are you simply selecting multiple files from your computer and double clicking to automatically open in Camera RAW?
Also curious, with all of your images open in the RAW editing window, what happens when you use the arrows near the bottom right? Does your image change?
Cheers,
Michael

Problems with Acrobat 8 and Windows 7 64 bit

Hi all
I need help with Acrobat 8 and Windows 7.
During the installation I'm asked to locate the file AdobePDF.dll on the disk. Selected the file in C:\Program Files (x86)\Adobe\Acrobat 8.0\Acrobat\Xtras\AdobePDF\AMD64.
The installation finishes without any other problem.
The problem arises when I want to create a pdf from a Word document. I'm using Office 2007. When I select he option to create a pdf from a file, I get message in the attached image.
If I try to used the Adobe PDF printer from within Word, nothing happes. The small printer icon apprears in the Windows task bar, but that is all. If I double click on the icon, I can see the print job, but that's all. There is no dialog box that asks me to save the file.
Assistance will be apppreciated.

Acrobat 8 is not certified for Win7, particularly the x64 version. If you got the installation to go, the first step is to update AA8 to at least AA8.2. The x64 with XP required at least AA8.2 and I suspect that has not changed. I would suggest updating to the latest, either from the help menu (until no more updates are available) or by downloading the updates from the adobe.com>downloads page. For the latter, download ALL updates after your current version and install them in ORDER. They are not cummulative in most cases. You only need to reboot after the final update. The updates may get you going. If not, you may simply have to upgrade to AA9 or search for what others have been able to do in your situation.

Problem with solver DLL load and Excel 2010

Since upgrading from Office 2007 to Office 2010 we've started to experience a problem with the solver addin when our own analytics addins is also loaded. I have found a solution, but I think it may highlight a problem with the latest version of the solver
addin for Excel 2010.
Firstly, to describe the problem - the solver addin seems to load normally when Excel 2010 starts up, however when a "Solve" is performed we are seeing a "File not found: Solver32.dll" error at the final "Keep Solver Solution" stage. This only happens our
own analytics addin is loaded. We've been careful to make sure that our own addin does not change the working directory and also that it has been built against the correct Excel 2010 SDK libraries. We do not see this error with any other versions of Excel
running on the same PC or any other environment.
After some searching we found other people were having similar problems and after a bit more probing I found a solution that works - but that I'm not very happy with.
If I copy the Solver32.dll from:
C:\Program Files (x86)\Microsoft Office\Office14\Library\SOLVER
(where it was installed)
into :
C:\Windows\SysWOW64
(where Windows 7 keeps its 32 bit system DLLs)
then the problem goes away.
This seems to indicate that somehow Office 2010 has a problem that causes it to search in the wrong folder for the Solver32.dll when another addin is loaded in between the original Solver32.XLAM at start up and the use of the Solver in the sheet (which eventually
requires this DLL to be loaded). Oddly, this only happens after a solution is found and "Keep Solver Solution" is selected - and I'm not sure why it's not looking for Solver32.dll any earlier.
This is not a problem with any earlier versions of Excel and I suspect is a bug in the Office14/LIBRARY/SOLVER implementation. Is there any way to get this followed up?
Thanks,
Andy

I'm facing the same issue. With an Excel VSTO add-in we're building. When the add-in is enabled the assembly solver32.dll can't be found. With our add-in disabled the DLL is resolved as (Sysinternals Process Monitor trace):
EXCEL.EXE CreateFile
C:\Program Files (x86)\Microsoft Office\Office14\Solver32.dll
EXCEL.EXE CreateFile
C:\Windows\SysWOW64\Solver32.dll
EXCEL.EXE CreateFile
C:\Windows\system\Solver32.dll
EXCEL.EXE CreateFile
C:\Windows\Solver32.dll
EXCEL.EXE CreateFile
C:\Program Files (x86)\Microsoft Office\Office14\Library\SOLVER\SOLVER32.DLL
and with our add-in enabled the following locations are tried, but solver32.dll won't be found:
excel.exe CreateFile
C:\Program Files (x86)\Microsoft Office\Office14\Solver32.dll
excel.exe CreateFile
C:\ArcGIS\______path to our add-in install location_____________\Solver32.dll
excel.exe CreateFile
C:\Windows\SysWOW64\Solver32.dll
excel.exe CreateFile
C:\Windows\system\Solver32.dll
excel.exe CreateFile
C:\Windows\Solver32.dll
excel.exe CreateFile
C:\Program Files\Common Files\Microsoft Shared\Windows Live\Solver32.dll
excel.exe CreateFile
C:\Program Files (x86)\Common Files\microsoft shared\Windows Live\Solver32.dll
excel.exe CreateFile
C:\Windows\SysWOW64\Solver32.dll
excel.exe CreateFile
C:\Windows\Solver32.dll
excel.exe CreateFile
C:\Windows\SysWOW64\wbem\Solver32.dll
etc...

Problems with Drishti.dll

Just some info to the group. We upgraded our servers to ZFD 3.2 SP2,
and
had been testing the 4.83 w/SP2 client with no issues, so, on
Saturday,
began a mass push via ACU to about 1500 workstations. Beginning on
Sunday,
and, especially on Monday, we started receiving reports of problems
with
Win2K machines: client would install, user would reboot, get to the
Win2K
SplashScreen, the blue line at the bottom would go all the way to the
right,
then stop, and, that was it. This happened on about 200 machines,
and,
since this is a hospital, was bad news. We had NOT seen this in
testing.
We attempted to boot into safe mode (with or without networking),
which we
could, and remove the client, which we could. At this point, only
some of
the machines would then be able to boot into Windows, the rest were
still
locked up.
Opened a "network down" incident with Novell, got an extremely
aggressive
tech who, not recognizing this, got us on a three-way with an equally
aggressive tech from Microsoft. Spent the better part of the day on
fixing
this (while the users were parading around the IT castle with
torches), and,
late in the day discovered it was the c:\winnt<windows for
xp>\system32\drishti.dll (used for RM video speedup) causing the
problem.
This was new or modified in 4.83w/SP2, and, reports on problems
mentioned a
BSOD, not a lockup at boot time.
Bad thing was, uninstalling the client did NOT remove this file, nor
did it
remove other RM components such as Mouse and Video Lock services, so,
was
not immediately apparent that this was a Novell issue, especially
after the
client was removed. Also, it didn't matter whether RM was loaded at
client
install, or, later, from the server. Seems that the problem is caused
by
this file and older NVidia or ATI drivers (not sure on other vendors,
there
are TID's on these two). Not sure if the latest video drivers would
always
cure this, either, but, seemed to (we use Dell's, and...every one is
either
ATI or NVidia).
Immediate plans to get back up are to rename/delete this dll on bad
machines, then see if we can continue to push out RM either via
initial
client install or via later server push, with this dll removed.
Novell is
working on a fix, and, also ensuring that this dll, and all other RM
components are completely removed, as they should be, when the client
is
uninstalled.
Hope this prevents any issues at other sites!

We are also having problems with this on new Dell Optiplex 270's. We
tried updating the driver with the newest from Dell and Intel with no
luck along with installing the OS from scratch. Renaming this .dll was
our fix also.
Tom DeLozier
Bill Bradley wrote:
> Just some info to the group. We upgraded our servers to ZFD 3.2 SP2,
> and
> had been testing the 4.83 w/SP2 client with no issues, so, on
> Saturday,
> began a mass push via ACU to about 1500 workstations. Beginning on
> Sunday,
> and, especially on Monday, we started receiving reports of problems
> with
> Win2K machines: client would install, user would reboot, get to the
> Win2K
> SplashScreen, the blue line at the bottom would go all the way to the
> right,
> then stop, and, that was it. This happened on about 200 machines,
> and,
> since this is a hospital, was bad news. We had NOT seen this in
> testing.
>
> We attempted to boot into safe mode (with or without networking),
> which we
> could, and remove the client, which we could. At this point, only
> some of
> the machines would then be able to boot into Windows, the rest were
> still
> locked up.
>
> Opened a "network down" incident with Novell, got an extremely
> aggressive
> tech who, not recognizing this, got us on a three-way with an equally
>
> aggressive tech from Microsoft. Spent the better part of the day on
> fixing
> this (while the users were parading around the IT castle with
> torches), and,
> late in the day discovered it was the c:\winnt<windows for
> xp>\system32\drishti.dll (used for RM video speedup) causing the
> problem.
> This was new or modified in 4.83w/SP2, and, reports on problems
> mentioned a
> BSOD, not a lockup at boot time.
>
> Bad thing was, uninstalling the client did NOT remove this file, nor
> did it
> remove other RM components such as Mouse and Video Lock services, so,
> was
> not immediately apparent that this was a Novell issue, especially
> after the
> client was removed. Also, it didn't matter whether RM was loaded at
> client
> install, or, later, from the server. Seems that the problem is caused
> by
> this file and older NVidia or ATI drivers (not sure on other vendors,
> there
> are TID's on these two). Not sure if the latest video drivers would
> always
> cure this, either, but, seemed to (we use Dell's, and...every one is
> either
> ATI or NVidia).
>
> Immediate plans to get back up are to rename/delete this dll on bad
> machines, then see if we can continue to push out RM either via
> initial
> client install or via later server push, with this dll removed.
> Novell is
> working on a fix, and, also ensuring that this dll, and all other RM
> components are completely removed, as they should be, when the client
> is
> uninstalled.
>
> Hope this prevents any issues at other sites!
>
>
>
>
>

Problem with xcompmgr and i3 window manager

Hey guys,
Had a hard time trying to search for this problem. and nothing came up for the exact problem I was having. Anyways this is my problem. with xcompmgr is that it doesn't seem to be refreshing or something. it leaves trails of previous windows for some reason. not sure why. Anyone have this problem or someone know how to fix it??!?
Here is a link to show you what i mean.
http://oi45.tinypic.com/2nlaghy.jpg
Thanks in advance for your kind and prompt attention.
Sincerely,
Sicariuxs

Wow psychadelic!
I found xcompmgr to be rather buggy when I used to use it. Try xcompmgr-dana (dcompmgr I think) or Compton. I used to use Compton and it worked pretty well.
I stopped using real transparency in favor of pseudo-transparency because I sometimes use the tabbed mode on multiple terminals... tell me how awesome it is to read three terminals stacked on each other

Problems with Comodo Kill Switch, Windows Services & Bitlocker Encryption on Asus N56VZ

Hi All,
So recently I found myself stuck in a different scenario than before, and after many hours researching and efforts to fix this I still find myself stuck yet with a few options still to fix.
What is the problem?
So as a security cautious user when i first got to Windows 8.1 Pro 64Bit I encrypted both the C and D drive (Split the main disk) to protect myself and my family. Unfortunately that has not been very helpful with the way in which booting and running from
either external USB devices or CD/DVD works, not allowing myself to at all.
My usual security suit I use is Comodo Internet Security, which additionally comes with Comodo Kill Switch. Whilst using the application instead of stopping one of the TCP connections I was meant to I accidently stopped an Windows Explorer connection.
For some reason since then Windows Explorer, nor most windows apps or services themselves will run. For example msconfig will run but sfc /scannow or mmc will not, whether in safe mode or normal mode.
What Caused the Problem?
Cannot 100% say
What I Think Caused the Problem?
Myself running Comodo Kill Switch stopping a vital server connection with Windows Explorer that messed up alot. Or a potential Virus unknown how cannot fully scan system as wont boot externally or run many apps.
Additional Info
Asus Webcam is Disabled on Purpose
Laptop was fully customized to run latest games full graphics minus Anti Aliasing, works with Evolve + CoD Advanced Warfare
Laptop does not boot if USB Keyboard plugged in, works with everything else normal (had this on other systems no problem for me)
Ask me for more info if required to add here, braindead again
Specifications of my system
Intel® Core™ i7 3610QM Processor
Windows 8.1 Pro 64Bit
Intel® HM76 Chipset
DDR3 1600 MHz SDRAM, 2 x SO-DIMM 8GB
15.6" HD (1366x768)/Full HD (1920x1080)/Wide View Angle LED Backlight
NVIDIA® GeForce® GT 650M with 2GB DDR3 VRAM
1TB 5400RPM OR 750GB 5400/7200RPM (Cannot remember off top of head, braindead)
Super-Multi DVD
Kensington lock (Security Feature)
LoJack (Security Feature)
BIOS Booting User Password Protection (Security Feature)
HDD User Password Protection and Security (Security Feature)
Pre-OS Authentication by programmable key code (Security Feature)
What Can Run and Won't Run?
ON BOOT:
Bitlocker Encryption Password & Advanced Settings are accessible
Bios (password protected) is accessible
Windows Recovery Mode is accessible (Think it is F9 or F10)
Windows Logon Password Screen is accessible
ON NORMAL/SAFE-MODE START UP:
After Log-In Windows Explorer will not run
Task Manager will run, also allows me to browse the files when trying to start new task
Can run Command prompt
Cannot run any control panel items
Cannot run services.msc
Cannot run mmc
Cannot run sfc
Every time it metions windows drive is locked
Start Error's when running certain applications (Will post codes soon)
Rufus USB Tool does run
Cannot boot Kali Linux off USB
Cannot boot Windows 8.1 off USB
Cannot boot Windows 8.1 off DVDRW
Fixwin2 will not run
Apps either work or don't whether in safe mode or normal
Cannot use Windows Installer
What Fixes I Have Tried So Far
Ok so like any normal user I don't want to lose my files. So here are what I have tried so far:
Repair MBR (Repair Completed, No Luck)
SFC /SCANNOW (Returns Error 'Windows Resource Protection could not start the repair service')
Tried sfc /SCANNOW /OFFBOOTDIR=c:\ /OFFWINDIR=c:\windows (Could not access drive)
Fixwin2 (Will not run in either normal or safe mode)
Booting using Windows 8.1 via USB (Cannot boot from extermal devices due to Bitlocker Encryption)
Booting using Kali Linux Via DVD & USB (Cannot boot from external devices due to Bitlocker Encrytption)
How do I know it is because of Bitlocker, because last time I disabled it, I could run from external devices
Tried to run bitlocker to change settings (Will not run)
Have used both password and recovery keys to unlock driver, they work but when applications are running on windows the drive is still locked?
Tried windows Automatic Diagnostic and Repair (Could not repair anything, did make a log I am still to extract from the syste)
There are No System Restore Points
I'm sure there is much more information I could post however I will leave it on an ask to know basis, apart from the log files and further information to gather. Below is my list of trial and error fixes to try for today (need more ideas and help please!):
Hiren's 15.2 Boot CD via DVD (NOT ABLE TO BOOT)
Hiren's 15.2 Boot CD via USB (NOT ABLE TO BOOT)
Research into the Bios and Possible Update in-case of implementation of Virus, can access flash utility (STILL NOT TESTED)
Try and get a portable version or a working version of windows installer to try and re-install Comodo Internet Security (STILL NOT TESTED)
Another way to disable Bitlocker
Anti-Malware / Anti-Virus Scan If Possible to Run One
Bitlocker Repair Tool, will try this also
I have posted this as have not found much info online, usually find it and crack on but this time things are a little more tricky, my priority task I really need to do is remove the Bitlocker Encryption, but if the application will not run... what do I do
then?
Thanks for your time reading all, Sorry for any poor formatting or spelling.
Update 1: MMC.exe Error Code
Ok so now have the computer in safe mode, still same as before, no explorer.exe, no services etc... Just went into the Task Manager > Services (Tab) > Open Services (Option at bottom)
This is the error I get:
'The Instruction at 0x785a746c referenced memory at 0x000000a8. The memory could not be read.
Any Ideas on what this error is and why?
Update 2: CHKDSK Works with no Fix
Update 3: Hiren's 15.2 Boot CD - USB Boot still no luck booting around Bitlocker Encryption
Just to explain again, I already have unlocked the drive with correct bitlocker password or recovery key yet the drive remains locked not allowing windows refresh of files of complete install from the windows recovery menu as keeps saying drive is locked

Ok so attempt number two to write this update via bloody phone! (Just refreshed page whilst writing!)
Update 4:
Problem - cannot run from bootable devices (DVD/USB)
Cause - bitlocker fully encrypted drive stops this working
Repair - Boot up holding F9 to enter windows recovery Input Bitlocker recovery keys to unlock drives
Navigate to Command Prompt in advanced settings Execute following code:
Repair-bde c: d: -rp 000111-222333-444555-etc...
(Code found from https://technet.microsoft.com/en-us/library/ee523219%28v=ws.10%29.aspx)
Note for those using this: It is common while unlocking certain drives to get errors such as: Quote from http://www.benjaminathawes.com/2013/03/17/resolving-partial-encryption-problems-with-bitlocker/
"LOG INFO: 0x0000002aValid metadata at offset 8832512000 found at scan level
1.LOG INFO: 0x0000002b Successfully created repair context.
LOG ERROR: 0xc0000037 Failed to read sector at offset 9211592704.
(0×00000017) LOG ERROR: 0xc0000037 Failed to read sector at offset 9211593216.
(0×00000017) …followed by around 20 similar entries that differed only by the offset value"
Repair Status for Update 4: COMPLETED - However over wrote D drive data so now need to recover that
Problem 2 - windows services corrupted along with windows files
Cause - Unknown
Repair - wait until system is fully decrypted Once fully decrypted ensure boot from USB/DVD
Re-do fixes that would not work before if this has fixed boot issue Confirm fix / update post Hope anything I put here helps others also

Problems with FPLVMgr.dll in Windows NT

Similar Messages

Maybe you are looking for