Problems with FTP receiver adapter - sun.io.MalformedInputException

Hi,
I have to put ascii-files from our XI in germany to a FTP-server in the usa. If I use binary/binary for both options in the adapter config, the files on the target ftp are not usable (only @@@@ appear). If I use text/text (with- or without specifying the codepage) I get in the adapter-monitoring the error
sun.io.MalformedInputException
Has anyone got an idea ?
Thanks a lot !
werner

Hi,
Here is a some external thread talking about the same.
Re: Smartform and Idoc
http://h21007.www2.hp.com/dspp/tech/tech_TechDocumentDetailPage_IDX/1,1701,5754,00.html
It may be useful.
Regards,
moorthy

Similar Messages

Problem whit FTP receiver adapter

Hello..
i have a very strange problem.
I created 2 similar interface Idoc-XI-File (via FTP) whit file content conversion.
I configured in both cases the comunication channel but only in one case work correctly.
The second channel create the file but just whit the first field.
I check all monitor. the configuration is correct (field name and lenght). the messages in adapter monitor is:
<?xml version="1.0" encoding="UTF-8" ?>
- <ns0:MT_SPEDI_DESADVUT xmlns:ns0="http://sabaf.it/edi">
- <ROW>
- <POSITION>
<TIPO_RECORD>CA</TIPO_RECORD>
<NUMERO_BOLLA>1111111111</NUMERO_BOLLA>
<DATA_BOLLA>20080611</DATA_BOLLA>
<CODICE_AA>M0</CODICE_AA>
<CODICE_AB>MA</CODICE_AB>
<CODICE_AC>DT</CODICE_AC>
<CODICE_AD>SA</CODICE_AD> .....
but the result file is:
CACA
Configuration of content conversion in adapter is:
POSITION.fieldNames TIPO_RECORD,NUMERO_BOLLA,DATA_BOLLA,CODICE_AA,CODICE_AB,CODICE_AC,CODICE_AD
POSITION.fieldFixedLengths 2,10,8,2,2,2,2
any suggestion?

Hi.
If you disable content conversion in ftp receiver...the output is ok? does it contains all required/expected fields? try to disable the file content conversion using the same example data that does not work when FCC is enabled.
Regards,
Matias.

Problem on FTP receiver adapter

Hi, All,
I have two scenarios, both from XI SAP proxy to FTP receiver. And two scenarios are running almost at the same time. I need to send thousands of messages through these scenarios. Now I got problems when I sent out around 300 messages. The messages just stuck there and don't get through to FTP receiver communication channels. I configured these two FTP receiver communication channels in one Business System. I don't if that causes the problem. Please advise. Thanks a lot.
Jack

Hi! Jack,
According to my Understanding Check once again the below steps..
1. Check both Queues regarding SMQ1 and SMQ2.
2. Another thing is got to Communication Channel monitoring and select your Channel and check AUDIT
   LOG and ADD TIME STAMP such that u can get 2 things.
         a) first of all one information that up to at what time XI got picekd the file and
         b) Also u can observe another point that whether the File got picked from Source and holding in XI or else stil the XI doesn't got picked.
3. The most important thing is You asked how to clear all the queues right ? U can delete queues in two ways.
       a) U can go to SMQ1 and SMQ2 and delete the queues there it self
       b) THere is another way to monitor the XI MESSAGES in detail view by search category in
            ASYNCH and SYNCH mode and also based on ERRORS..
Note:: In order to monitor you need to check the monitoring on SYSTEM.JSP level. Go through the below linik.
http://HOSTNAME:PORT/MessagingSystem/monitor/systemStatus.jsp
THere u can get each and every messages and u can clear the BULK of messages in queue.
Regards:
Amar Srinivas Eli

FTP/SSL Connection Problem for FTP Receiver Adapter

Hello All,
We are trying to establish an FTPS/SSL connection with one of our customers from our XI(Unix) system, and are receive following error:
iaik.security.ssl.SSLException: Server certificate rejected by ChainVerifier
Communication Channel Parameters:
Connection Security: FTP (FTP Using SSL/TLS) for Control Connection or FTP (FTP Using SSL/TLS) for Control Connection and Data Connection
Command Order: AUTH TLS, USER, PASS, PBSZ, PROT
Checkbox - Use X.509 Certificate.... checked (Certificate was provided by third party (customer issued) and uploaded to service_ssl certificate store on J2EE server)
Data Connection: Passive
Port: 10021
Keystore: service_ssl
X.509 Certificate & Private Key: ssl-credentials
Note: Initial handshaking occurs but connection is being dropped by the third party FTP Server when SSL certificate credentials are being validated. We also tried connecting to the third party FTPS server using standard FTPS client(FileZilla software), this connection gets established successfully with no certificate issues which means certificate and third party FTP Server is functioning correctly.
We therefore are thinking that the problem lies with our XI system being unable to load the certificate information correctly at the point when FTPS session is being established.
Your help and suggestions will be greatly appreciated.
Thanks and Best Regards
Prashant Rajani

Hello All,
Further in order to test connection set up and communication channel configuration we tried simulating the FTP connection locally by configuring FTP Server using FileZilla at a local machine and accessed it from Client's XI Server.
This set up simulates the problem we encounter with our customer's FTP Server.
If connection security parameter in communication channel for Sender FTP Adapter is set to "FTPs( FTP Using SSL/TLS) with Control Connection" only, file gets successfully created with data at the FTP server but as soon as we switch the connection security parameter to "FTPs( FTP Using SSL/TLS) with Control and Data Connection", we receive error "Certificate rejected by Chain Verifier". The initial handshaking happens successfully and file gets created at the FTP Server but its empty, connection fails when attempt is made to write data into file and we end up with said error thereby closing the connection.
This is what the FTP (FileZilla) sees when the XI system attempts to set-up a fully encrypted data (FTPS) connection i.e., connection security parameter value as"FTPs( FTP Using SSL/TLS) with Control and Data Connection" :-
- (not logged in) (10.18.106.34)> Connected, sending welcome message...
- (not logged in) (10.18.106.34)> 220-FileZilla Server version 0.9.18 beta
- (not logged in) (10.18.106.34)> 220-written by Tim Kosse ([email protected])
- (not logged in) (10.18.106.34)> 220 Please visit http://sourceforge.net/projects/filezilla/
- (not logged in) (10.18.106.34)> AUTH TLS
- (not logged in) (10.18.106.34)> 234 Using authentication type TLS
- (not logged in) (10.18.106.34)> SSL connection established
- (not logged in) (10.18.106.34)> USER test
- (not logged in) (10.18.106.34)> 331 Password required for test
- (not logged in) (10.18.106.34)> PASS ***********
- test (10.18.106.34)> 230 Logged on
- test (10.18.106.34)> PBSZ 0
- test (10.18.106.34)> 200 PBSZ=0
- test (10.18.106.34)> PROT P
- test (10.18.106.34)> 200 Protection level set to P
- test (10.18.106.34)> SYST
- test (10.18.106.34)> 215 UNIX emulated by FileZilla
- test (10.18.106.34)> PWD
- test (10.18.106.34)> 257 "/" is current directory.
- test (10.18.106.34)> CWD /payment/
- test (10.18.106.34)> 250 CWD successful. "/payment" is current directory.- test (10.18.106.34)> TYPE I
- test (10.18.106.34)> 200 Type set to I
- test (10.18.106.34)> PASV
- test (10.18.106.34)> 227 Entering Passive Mode (10,27,7,103,15,63)- test (10.18.106.34)> STOR BHPDSB20060911-153840-834.txt
- test (10.18.106.34)> 150 Connection accepted
- test (10.18.106.34)> Data connection SSL warning: SSL3 alert read: fatal: bad certificate
- test (10.18.106.34)> Data connection SSL warning: SSL_accept: failed in SSLv3 read client certificate A- test (10.18.106.34)> Data connection SSL warning: error:14094412:SSL routines:SSL3_READ_BYTES:sslv3 alert bad certificate- test (10.18.106.34)> Data connection SSL warning: error:140940E5:SSL routines:SSL3_READ_BYTES:ssl handshake failure- test (10.18.106.34)> 426 Connection closed; transfer aborted.- test (10.18.106.34)> QUIT
- test (10.18.106.34)> 221 Goodbye
- test (10.18.106.34)> SSL connection established
Please suggest your valuable inputs if we are missing out something. Any helpful inputs in this regard is highly appreciated.
Thanks and Best Regards
Prashant

Problem with Mail receiver adapter

Hi,
I have the following scenario, Proxy ABAP-XI -Mail. I have configured my scenario, and the payload is correctly sent to the email address that i have configured in the mail adapter, but in xml format, the point is that I have to send the attached message as txt format.
I have done the following configuration in the receiving mail adapter channel, in the module section:
Processing sequence
localejbs/sap.com/com.sap.aii.adapter.mail.app/XIMailAdapterBean Local Enterprise Bean mail
localejbs/AF_Modules/MessageTransformBean Local Enterprise Bean XML2Plain
Module configuration
XML2Plain Transform.Class com.sap.aii.messaging.adapter.Conversion
XML2Plain Transform.ContentDisposition attachment;filename="Gen.txt"
XML2Plain Transform.ContentType text/plain;charset=utf-8
XML2Plain xml.REGISTRO_CABECERA.fieldFixedLengths 52
XML2Plain xml.REGISTRO_DE_DATOS.fieldSeparator ;
XML2Plain xml.REGISTRO_PIE.fieldFixedLengths 10
XML2Plain xml.addHeaderLine 0
XML2Plain xml.conversionType StructXML2Plain
XML2Plain xml.recordsetStructure REGISTRO_CABECERA,REGISTRO_DE_DATOS,REGISTRO_PIE
Maybe i missed something in my configuration, or maybe this is not the right way for doing it, can anyone help me with this??
Thanks a lot in advanced,
Luis

Hi,
1. localejbs/AF_Modules/MessageTransformBean Local Enterprise Bean XML2Plain
l2. ocalejbs/sap.com/com.sap.aii.adapter.mail.app/XIMailAdapterBean Local Enterprise Bean mail
Check out the page 13 in the following URL
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/02706f11-0d01-0010-e5ae-ac25e74c4c81
Page 8 in the following
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/99593f86-0601-0010-059d-d2dd39dceaa0

Problem with SOAP receiver adapter? Please help!

Hi experts
   I have the following scenario:
   SAP R/3 -ABAP Proxy>XI--->SOAP --webservice
   As you can see, I am sending data from R/3 system to XI via ABAP proxy. XI then sends data or calls a webservice via SOAP adapter.
When I test this scenario I am getting a error in the sxmb_moni that is,
"com.sap.aii.af.ra.ms.api.DeliveryException: TEXT/HTML; HTTP 504 Gateway Time-out"
I have checked the webservice url and it is working fine.
Can somebody tell me why am I getting this error message? How do I resolve this?
Thanks
Gopal

Hi,
Can you please check the settings in Soap Adapter with Module Adapter setting with ModuleTranformBean parameters? There may be some problem. use HTTP Adapter and the message type 'HttpPostIn' to send as HTTP Post.
Also
There is the note 450226 gives an overview over error codes
Probably below solution may help you.........
As an administrator on your portal go to:
System Configuration > Service Configuration >applications
Under: com.sap.portal.ivs.httpservice > Services > Proxy
If any proxy settings are configured you may end up with the problem, so you need to set the "nonProxyHosts" to include the trex host.
regards
Aashish Sinha
PS : reward points if helpful

Problem with soap receiver adapter

Hi All
I have Idoc sender and soap receiver in my scenario.
I am calling web service deployed on WAS.
The web service is getting called but the acknowledgement message in xi contains following system error acknowledgement because of which xi changes the status of message to WAIT and starts retrying.
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Category>XIAdapterFramework</SAP:Category>
<SAP:Code area="MESSAGE">GENERAL</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText>com.sap.aii.af.ra.ms.api.MessagingException: java.net.SocketTimeoutException: Read timed out: com.sap.aii.af.ra.ms.api.RecoverableException: java.net.SocketTimeoutException: Read timed out</SAP:AdditionalText>
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack />
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
Please anybody can help to resolve this problem. This scenario has worked without any error previously.
Thanks in advance
Beena

Hi Bhavesh,
It is an Async call where method does not return anything.
I added entries in IDX_NOALE but still it is setting the message status to WAIT and does retry.
Following is the Audit Log in Runtime workbench :
Audit Log for Message: 22b3052d-c519-034e-85db-e65d541d6414
Time Stamp Status Description
2006-12-13 10:25:23 Error SOAP: error occured: java.net.SocketTimeoutException: Read timed out
2006-12-13 10:25:23 Error Exception caught by adapter framework: Read timed out
2006-12-13 10:25:24 Error Delivery of the message to the application using connection AFW failed, due to: Read timed out.
2006-12-13 10:25:24 Success The asynchronous message was successfully scheduled to be delivered at Wed Dec 13 10:30:24 GMT+05:30 2006.
2006-12-13 10:25:24 Success The message status set to WAIT.
2006-12-13 10:30:25 Success Retrying to deliver message to the application. Retry: 1
2006-12-13 10:30:25 Success The message was successfully retrieved from the receive queue.
2006-12-13 10:30:25 Success The message status set to DLNG.
2006-12-13 10:30:25 Success Delivering to channel: INSPWCCT_PVtoSAP_Ack
2006-12-13 10:30:25 Success SOAP: request message entering the adapter
2006-12-13 10:35:28 Success SOAP: call failed
2006-12-13 10:35:28 Success SOAP: sending a delivery error ack ...
2006-12-13 10:35:28 Success SOAP: sent a delivery error ack
2006-12-13 10:35:28 Error SOAP: error occured: java.net.SocketTimeoutException: Read timed out
2006-12-13 10:35:28 Error Exception caught by adapter framework: Read timed out
2006-12-13 10:35:28 Error Delivery of the message to the application using connection AFW failed, due to: Read timed out.
2006-12-13 10:35:28 Success The asynchronous message was successfully scheduled to be delivered at Wed Dec 13 10:40:28 GMT+05:30 2006.
2006-12-13 10:35:28 Success The message status set to WAIT.
I have tried this scenario earlier. I am sending the same Idoc from R3 which was processed successfully earlier.
Thanks
Beena.

Problem with FTP Adapter in creating a new Folder

Hi all,
I have a requirement in which a BPEL process shud create a folder named as sysdate dynamically and write a
CSV file into that.(ex: PO/2010-03-09/PO_1.csv).I created a header variable for Oubound FTP adapter and
passing the file directory as concat('PO/',xp20:current-date(),'/') to outbound header directory variable.Problem is FTP
adapter is not creating the sysdate folder its says:1.check u have privileges 2.file name is too long....Blah....Blah.
But i have all the privileges for that user.If i manually create the sysdate folder the FTP adapter is placing the CSV
file.The same works fine with file adapter...but i need to use FTP since the FTP server can change in future.Seems to
be a problem with FTP adapter....can some one help.
Iam using SOA 10.1.3.4
Regards,
Edited by: 0racler on Mar 9, 2010 4:46 AM
Edited by: 0racler on Mar 9, 2010 5:49 AM

any thoughts????

FTP receiver adapter does not transfer (STORE) file

Hello gurus,
In my scenario I want to transfer files from server X to server Y using FTP.
To get the files from server-X I use the FTP sender adapter, to put the files on server-Y I user the FTP receiver adapter.
Getting the file (QoS = EOIO) is not a problem; I see the result is SXM_MONI.
Putting the file doesn't seem to work; I don't have an error message in SXMB_MONI but the file is not physical stored on server-Y.
When I monitor server-Y I see that XI connects with the configured user/pwd and even creates the directory when it doesn't exist but the file is not STORED.
I'm not using the BPE, this is a very simple and basic scenario: what comes in, goes out.
Can you please advice what might be the cause of the strange behavior?
Many thanks - Danny

Hello Michal, thanks for your (very) quick reply.
this is the result:
1) adapter monitoring
Status to be delivered:
- Message successfully received by messaging system. Profile: XI URL: http://xdsci.cie.etat.lu:53100/MessagingSystem/receive/AFW/XI Credential (User): XIISUSER
- Using connection File_http://sap.com/xi/XI/System. Trying to put the message into the receive queue.
- Message successfully put into the queue.
2) sxmb_moni
- no error
3) communication channel monitor
- Message successfully received by messaging system. Profile: XI URL: http://xdsci.cie.etat.lu:53100/MessagingSystem/receive/AFW/XI Credential (User): XIISUSER
- Using connection File_http://sap.com/xi/XI/System. Trying to put the message into the receive queue.
- Message successfully put into the queue.
- The message was successfully retrieved from the receive queue.
- The message status set to DLNG.
- Delivering to channel: FTP_receiver
- MP: entering
- MP: processing local module localejbs/CallSapAdapter
- File adapter receiver: processing started; QoS required: ExactlyOnce
- File adapter receiver channel FTP_receiver: start processing: party " ", service "xyz"
Any idea?

Wrong port in FTP receiver adapter - no errors in message monitoring?

Hello all
We're on XI 3.0 SP16 and have created / configured a HTTP XML -> XI -> FTP Server scenario. In the receiver comm. channel (ftp) we had specified a wrong port number and always wondered, why we never got errors in message monitoring. Everything seemed to be processed correctly... but no file arrived on the FTP server (receiver) side!
After correcting the wrong FTP port number in the receiver FTP comm. channel everything went fine.
We now encountered a similar problem with a RFC receiver adapter. We're using it in another scenario HTTP XML -> XI -> RFC to SAP R/3 (4.7).
For some reason it died (red status in adapter monitor) and it was no more possible to do RFC calls from XI to SAP R/3 (normal RFC adapter, NO proxies).
In XI message monitor everything seemed to be ok but no message arrived till SAP R/3. Nothing in any queue...
After deactivating and reactivation the RFC receiver comm. channel it worked again BUT ALL PREVIOUSLY SENT messages seem to be lost.
Is it really the way it works? Does XI integration engine at runtime NOT catch whether or not a RFC or FTP receiver adapter died, thus is not able to tell somewhere in message monitor that a message could not be delivered at all?
I'm really confused here but hopefully I simply don't understand some easy principles to take into account...
Our SAP R/3 is on rel. 4.70 with Web AS 6.20. The XI 3.0 plugin is not installed. Do we need to go with server proxies there and use QOS = best effort?!?
Thanks for some suggestions.
Best regards,
Renaud

Hi Michal
Thanks... works great for normal XML based messages!
Now, what if I wanted to pass binary files from one ftp server via BPM to another ftp server in order to enable the transport acknowledgment?
The files polled from ftp server using the ftp sender adapter are all in binary format (ARJ). No xml data in there. How should the message format look like in BPM for the receiving step? Or: how to make sure not to loose the binary content when passing through BPMs?
I need this sort of scenario because of the tansport acknowledgment and because I need to have some sort of message splitting (send the binary file over to a second ftp server and additionally send some kind of info message to SAP R/3 regarding thin binary file).
BTW: in the MessagingSystem/monitor/monitor.jsp I do not see sender / receiver information. Is this normal? It's quite of a bad thing to look inside each message in order to find out what message I'm having in front of me...
Thanks a lot for your support and patience!
Kind regards,
Renaud

Problem with File receiver

Hi, I have the following scenario, File->XI->File and
I have a problem with the File adapter (receiver). I can't generate it.
I was reading blog: File-Xi-File scenario donu00B4t work.
SXMB_MONI shows the message correctly but the receiver file is not generated.
Somebody can help me?
Thanks in advanced
Regards,
Sergio.

Hi Sergio,
I would suggest that you go through this blog for the entire File to File scenario and cross check this with the cofiguration done by you.
/people/venkat.donela/blog/2005/03/03/introduction-to-simple-file-xi-filescenario-and-complete-walk-through-for-starterspart2
/people/venkat.donela/blog/2005/03/02/introduction-to-simplefile-xi-filescenario-and-complete-walk-through-for-starterspart1
Also, do check these links for configuring your sender and receiver file adapters.
http://help.sap.com/saphelp_nw04/helpdata/en/e3/94007075cae04f930cc4c034e411e1/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/bc/bb79d6061007419a081e58cbeaaf28/content.htm
Regards,
Bhavesh
Message was edited by: Bhavesh Kantilal

Problem with FTP put operation..??

hi frendz,
i'm facing some problem with FTP put operation. The Get operation(reading a file) is working fine. i'm using Apache FTP server.FTP User is having all read/write permissions. When i putthe file using FTP command prompt then its working fine. But using BPEL/FTP adapter put operation is not working.
Main thing is its not giving any error but When i check the directory then i dont fine any file ther. In fact BPEL process is detecting directory where i'm going to write the file. But after completing the BPEL process i dont get any file.
i am using opaque fomat. n just passing some data into input string which i'm assigning to <invoke>'s variable.
Thanks a lot
-Mishit

Error itself indicates the potential issues -
Please ensure
1. Specified remote output Dir has write permission
2. Output filename has not exceeded the max chararters allowed by the OS and
3. Remote File System has enough spaceRegards,
Anuj

Filename from payload - FTP receiver adapter

Hello everyone!
I have a scenario wherein I need to get the value from a field coming from an IDOC and then give that value as the "filename" of the file that is saved in the FTP folder.
IDOC > XI > FILE
For example, if /ORDERS05/IDOC/E1EDK02/BELNR = 620000123
then I want the name of the file to be saved in the FTP folder to be 620000123.xml
I understand you may use the 'variable substitution' property in the FTP receiver adapter, but subsequent attempts at trying to configure that property have resulted in errors. Can anyone help me out?
Warm regards,
Glenn

do u have recordset name (root message)
For Ex: If you want to refer to the field which is bold
below is your variable substuition:
payload:root,1,e1,1,e2,2
<?xml version="1.0" encoding="UTF-8" ?>
<root>
<dummy>
 <e1>
 <e2>Data_1</e2>
 <f/>
 <g attr="abc">text</g>
 <e2>Data_2</e2>
 </e1>
</dummy>
<e1>
 <e2>illegal/value</e2>
 <f/>
 <g attr="abc">text</g>
 <e2 attr="fghij">Example Value</e2>
 </e1>
</root>
Similarly
for your strucutre:
<MS_MT>
<order>
 <number>
the variable substuition would be
payload:MS_MT,1,order,1,number,1
you have to give complete XML to arrive to this value.

FTP Receiver Adapter.

Hi All,
From XI I need to FTP file to outer system using
FTP Receiver Adapter
Now due to security reason my client wants to use FTPS
I checked in FTP Receiver Adapter -- there is an option
Connection Security -- FTPS (FTP Using SSL/TLS) for Control Connection.
Can I select this option and use like simple FTP Receiver Adapter?
Please tell the process/docs for it.
Regards
<Moderator note: Subject edited. Please do not use 'Urgent'. See the [Rules of Engagement|https://wiki.sdn.sap.com/wiki/display/HOME/RulesofEngagement] for further info.>
Edited by: Mike Pokraka on Jul 25, 2008 8:47 AM

Hi,
check some links on FTPS.
FTPS Sender and FTPS Receiver adapter. Pls help
SFTP vs. FTPS in SAP PI
http://help.sap.com/saphelp_nw04/helpdata/en/e3/94007075cae04f930cc4c034e411e1/content.htm
Introduction to simple (File-XI-File)scenario and complete walk through for starters(Part2)
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/964f67ec-0701-0010-bd88-f995abf4e1fc
Regards,
Phani

Use temporary file in FTP receiver adapter

Hi guys,
I'm not getting the purpose of "use temporary file" in FTP receiver adapter. Can you describe any situation, where this should be used?
What is the location of this temporary file?
Is it deleted after "normal" file is created?
Thanks a lot,
Olian

> I'm not getting the purpose of "use temporary file" in FTP receiver adapter. Can you describe any situation, where this should be used?
Some times when you create the file on your target dir then if there is another application looking for same file is quite faster to pick the file before it is complety written on target dir then in this situation using temporary file option is very helpful. What it does, it simply creates the file first by using temporary name once all bytes or bits has been transfered then it creates the original name and the temp file get deleted.
> What is the location of this temporary file?
Same location, where your original file is suppose to be written.
> Is it deleted after "normal" file is created?
Yes.
Regards,
Sarvesh

Problems with FTP receiver adapter - sun.io.MalformedInputException

Similar Messages

Maybe you are looking for