Problems with fx 5950 ultra 256
i have an intel pentium 4 875 motherboard with a 2.8 gig procesor with 2 memories of 512 ddr 400 and a 500 wts energy suply with a geforce fx 5950 ultra, my problem is the next.
when im playing games as command & conquer generals the computer turns off automaticly ill go to the option menu its not the first time its happenning since i bought this new pc i dont know what to do i need help it only happens when im playing
darhpibe
Check out these places they might ship to Peru!
http://www.newegg.com http://www.zipzoomfly.com http://www.Directron.com
http://www.tigerdirect.com
Remember if you buy a PSU get a quality named PSU, like a Antec,
Enermax, Fortron, or the best, PC Power & Cooling for your primary PSU!
You can use more than one PSU, but the primary PSU that’s used by the MB
needs to have the correct amount of wattage for the MB and the Hard Drives.
The second PSU can power the 12v fans, optical drives, floppy drives, Peltiers,
water pumps, cathode lights, 3.3v-5v &12v LEDs, fan controllers, temp sensor controllers, etc, etc, etc.
A word of caution though, unless you under stand how circuits and currents
are used in your rig, I would advise you not to do this, because you can possibly
smoke your rig and burn down your house!
Here is a thread on hooking up and using two PSU!
[http://www.ocforums.com/showindex.php?threadid=88976]
The H2O Guru
If You Build The Circuit, The Electrons Will Come!
Enermax 550 v1.2 EG651P-VE PSU
+3.3V=36A / +5V=36A / +12V=36A
+5V & +3.3v = 200Watts
nVidia MB Chipset Drivers v3.13
nVidia VGA Drivers v56.64
Similar Messages
-
Dual monitor problem with MSI 5950 Ultra
OK, I finally got the money to have a dual monitor setup.
I am using a MSI 5950 Ultra card
Soyo 600T Dragon Ultra MB
1 gb Corsair XMS 3500 ram
AMD 3000+ processor
Adaptec 2410SA SATA Raid card
4 Western Digital 74gb Raptors in RAID 0
2 V201S 20.1 inch Viewsonic LCD monitors.
XP Pro OS
I have updated all BIOS/DRIVERS on all hardware.
The problem is when I connect both monitors I get a system freeze. It is random and does not have to be event (ie mouse movement) generated. There are no event log entries. If I disconnect the analogue monitor the freezing goes away. Is this a known bug? If so when can I expect a driver/bios fix on the card? If not can anyone suggest a fix.
I have removed all non-essential cards.
THanks
SteveHave you installed the driver of the monitor?
-
Power supply with geforce 5950 ultra 256
my computer when im playing sometimes tells me that the video card its not recivin enough power and its going to lower the performance of the video card, i need some help with this i have a power supply of 400 watts
processor pentium 4 2.8
motherboard intel 875 pbz
1 gig of memory ram
hard drive of 20 gigs
3 extra coolers
sound blaster live sound card
msi geforce 5950 ultra 256thanks for the help guru and to all of you one last quiestion do you think this power s´pply would be enough?
http://www.newegg.com/app/viewProductDesc.asp?description=17-103-910&depa=0
Antec 550W Power Supply, Model "TRUE550" -RETAIL
Model# TRUE550
Item # N82E16817103910
Specifications:
Type: ATX
Maximum Power: 550W
PFC: No
Power Good Signal: 100-500ms
Hold-up Time: >= 17ms at Full Load
Efficiency: >= 68%
Over Voltage Protection: +5V trip pointOverload Protection: Latching Protection+5V @Input Voltage: 115/230 VAC
Input Frequency Range: 47-63 Hz
Input Current: 10.0A for 115VAC; 6.0A for 230VAC
Output: +3.3V@32A; +5V@40A; [email protected]; +12V@24A; -12V@1A; +5VSB@2A
MTBF: 80,000 hrs. @ 25ºC
Approvals: UL, TUV, CB, VDE, FCC CLASS B, DEMKO, NEMKO, SEMKO, F -
Neo 2 desert combat shuttering (sliding skipping etc)problem with bfg 6800 ultra
hey guys i just built a new pc after i got everything installed and updated to service pack 2 i installed desert combat only to have shuttering problems especailly turning fast in chopper or plane its kinda like lag or dropping frames but according to fraps its not drop frames just really choppy game play i know its not the card because i stuck it back in barton 3000 board worked fine. put my old msi 5950 ultra in same problem
fixes tried with no sucess
reinstall windows
turned off nv
turned off fast writes
tried my old set of 512 corsair plantinums =i gig dual chan
install nforce driver from nvidia
tried serveral nvidia graphic card drivers even the bet 71.21
turned off spread spectrum
pulled hair out
tried old video card which is 5950 ultra both cards work fine with old mobo
basically im out of ideas
please help
system specs
90mn winchester core 3500 with xp 90 thermalright heatsink
audigy zs 2
corsair 3200LLPro with leds i gig in dual chan mode
two 74 gig raptors in raid o
OCZ 520 watt modstream powersupply
bfg 6800 ultra overclocked from factory 425/1100
xp pro fully updated sp 2
please please please help been working on this for two days without any luck maybe ill just rma the board and get an asus or gigabite boardFirst off have you been using Driver Cleaner to get rid of all the old bits of drivers? if not go get it read the instructions and use it. Re-start the driver process again. The latest ones on the Nvidia site are probably a safe bet at the moment. So clean your PC with that prog and install new drivers.
Then do as you say you have done and ensure 'FastWrites' are turned off. This is most important. Get 'Riva Tuner' and this will comfirm you have them turned off. Also get the 'Coolbits' registry tweak. Run this and it will add overclocking capability to your display properties. You can adjust both 2D and 3D speeds. Now what you must ensure is that they are both set at the same speed! sometimes the 2D comes set lower than the 3D this can cause symptoms like you are having. Set the 2D to the same speed as the 3D.
I have an XFX6800 Ultra in my K8N Neo2 Plat and it works superbly so fingers crossed doing the above will sort it as they are the main probs with the 6800Ultra cards. -
Problems MSI GeForceFX 5950 Ultra
PC specifications:
Satellite PSU 500W (422) this one is really cheap...
PC ATX CASE with 3 exaust fans (1 pci / 1 lateral / 1 back)
MOBO ABIT NF7-S
Atlhon XP Barton 2.5 ghz (thermaltake vulano 9)
2x 512mb ram (1024) samsung PC3200 in dual channel mode.
HD Maxtor ATA133 80GB 7200rpm
LG CDRW
Mouse MS blue optical USB
PS2 PC clone gamepad
Keyboard and flopydisk
Problem - Some freaking FPS slowdown on any game with any video quality settings (battlefield, farcry, doom3, Wining Eleven 7, Need for Speed Underground, Unreal 2004, Jedi Academy and others).
What I already have checked - I just got my new video card, msi geforcefx 5950 ultra, and i got some minor stability problems. First of all I would like to say that I'm no newbie and I already checked:
1. I got all lastest bios and drivers: from my MOBO chipset (nforce2) and video card (from the MSI site, not from the nvidia site).
2. I think it couldn't be any compability problems with my MOBO chipset (it is nvidia too) and video card.
3. Any thermal problems (I'm very paranoic about that), got 3 fan\exaust on the pc case, and i only use thermaltake coolers/exaust.
4. My ram memory clock it is set to 333mhz just like my fsb for more stability.
5. The video card IRQ it is fine.
6. Bios configuration. I've test my AGP settings with and without AGP Fastwrites and PCI enchant (other bios options u guys have told me to leave as default like agp voltage and clock settings).
7. My PSU is 500w (422) and the I didn't connect anything on the power line that goes to the card.
8. I used driver cleaner 3.2 to clean my last msi fx 5200 drivers.
so here we go...
Question one - I've read all the posts just like mine, and seems that my problem it is with the PC PSU, but my PSU it is 500W, it was pretty cheap but it is 500W and u guys and the video card manual have told me that the minimum required it is 350w, well the specs of the PSU it is +3.3v 28A, +5V 50A (230W), +12V 18A (216W). I saw in some post that my card would need a 24A on the 12V line, and a 32A would be the real deal for overclocking, is that true? Will I have to buy another one???
Question two - By the way I used to have a msi geforcefx 5200 tdr-128, and when I changed the Video cards I just unistaled the video card drivers, is it enought? Or there is some freaking windows registration of my 5200 driver corrupting my 5950 performance. Will I have to Format my PC???
Question tree - Why when I try to an output video resolution below 640x480 to ANY TV (already tested on 5 TV) with S-video or RCA cables, the video files (divx/xvid...) get all overlapped???
Question fuor - If I change my drivers from de MSI nVidia to the original nvidia, will I get more stability???
So can u guys help me... thanks1.) You should be ok with 18 amps on the 12v rail, but that is bare minimum!
If you have poor airflow in your case, the power supply's efficiency will drop considerably due to excess heat. The voltages/amps can drop below acceptable levels and cause instability.
2.) It is possible that leftover registry entries and bad keys are crapping up your registry. If it's been a while since you've reformatted and you've installed/uninstalled lots of software since then, it might be something to consider.
However, I reccomend that you dump MSI drivers for the time being, and try the latest Forceware, go here for the latest nVidia Drivers you can also visit the archive if you'd like an earlier version here http://ftp://download1.nvidia.com/Windows/
Consider this procedure and use at your own risk.
Make sure to have the latest drivers downloaded.
I.) Disable System Restore and then procede to Control Panel and remove the VGA drivers. DO NOT REBOOT
II.)Run driver cleaner (I click the clean button at least twice) NOW REBOOT
III.) Ignore the hardware wizard and go directly to where you have the latest drivers and run the setup.
You may want to consider fresh chipset drivers.
3.) Not a clue
4.) Possible, but the overall condition of your OS, the process in wich you install drivers, and proper cooling, can have either an isolated or accumulative effect on overall stability of your system.
And Just to let you know, MSI employees don't visit this sight, a simple bump would eventually get someones attention (that's willing and able to answer your questions)
Suggestions on posting and getting better answers -
I have a problem with my computer, then i start it comes with a piture of CoreCell and there stands Corecell-Extreme Chip you've ever needed and the D-Bracket says it is at Bios sign on at nothing happen after that ??
Can some one help me...
I have a CPU athlon 64 3200+ skt939 512K
K8N Neo4 Ultra s939 4xDDR400
3 x 512 DDR SDRAM PC3200 333 mhz
SpaceSlugQuote from: SpaceSlug on 20-December-06, 17:33:57
Thx now it is working
A64 work with 1,2 or 4 sticks mate, where 2 sticks is best variant/option.
you are welcome mate. -
Dear members of this forum:
I have a problem with my mobo and i want to talk with you about it. 2 days ago, y bought a new chasis (with a new power supply (450W) to change my old one (350W) and some new components (a new modem, dvd rw and new HDD)
I removed all the components from my old chasis and passed them to new one. When i turned on my computer, WinXP started to Crash. Trying to investigate, i was removing the components (hdd conectors, lan card, modem, ect..). and the problem continues... But, at this moment, when i tried to turn on the computer for 4th time, It never come back (i cant turn on the computer) I removed everything component to reduce the complexity. Only the mobo, video and memory and i cant turn on! I removed from the new chasis and use the two power supplies (new and old ones..) and nothing. Nothing... No of the light signals ignites, i cant see the power led or some light. I tried to clear CMOS, but nothing happends... Anyone can help me? The mobo is out? I need to replace?
Thanks for help450 W. or 350W. really doesn't say much about P.S.U.s. Better tell us how much MAX AMPS they give to 3.3, 5 and 12v. lines. When turning on, do you see any life sign ? ( Fans spinning, any light ) Try starting all install again. Remove Mobo from case and put it over an isolated surface and start with min. hardware: CPU and HSF, memory (one stick) and Video Card.
-
Sata Raid problems with MSI KT4 Ultra Via kt400 chipset
ok i am having major problems setting up my sata raid in my brothers msi KT4 Ultra via KT 400 chipset
it comes up with my irq settings are wrong
my hard drives are WD 120 GB 7200rpms SATA - sold my mobo asus A7N8X - Delux and used my bros mobo above but just cant get them to work if ne one has ne idea on how to fix it (bios is still factory default do i have too flash it to get it too work etc)
would help lots thanxyou dont need multiple threads on the same thing
-
NV Silencer 5 Problem with a 6800 Ultra
I have purchased and installed an NV Silencer 5 on my Graphics card 6800 Ultra yesterday and realised that there was a problem in that the double backplate didnt have any vent holes to let the heat out, so i phones the people i bought it off and got them to send me on. However i left the cooler on just to see what kind of temps i was going to get and it was idling around 65 C which i thought was understandable. So i removed it and put the stock cooler back on with new thermal Paste and got 51 - 54 C which is great considering the old thermal paste had me up at 59C. Anyways i got the replacement bracket today and fitted it all and guess what its still idleing at 65C now. when i put my hand at the back of the exhaust i barely feel any airflow at all, the fans spinning in the right direction and i have applied the thermal paste properly, so what am i doing wrong or is there something wrong with the cooler?
First off have you been using Driver Cleaner to get rid of all the old bits of drivers? if not go get it read the instructions and use it. Re-start the driver process again. The latest ones on the Nvidia site are probably a safe bet at the moment. So clean your PC with that prog and install new drivers.
Then do as you say you have done and ensure 'FastWrites' are turned off. This is most important. Get 'Riva Tuner' and this will comfirm you have them turned off. Also get the 'Coolbits' registry tweak. Run this and it will add overclocking capability to your display properties. You can adjust both 2D and 3D speeds. Now what you must ensure is that they are both set at the same speed! sometimes the 2D comes set lower than the 3D this can cause symptoms like you are having. Set the 2D to the same speed as the 3D.
I have an XFX6800 Ultra in my K8N Neo2 Plat and it works superbly so fingers crossed doing the above will sort it as they are the main probs with the 6800Ultra cards. -
160 gigs hd probleme with my kt3 ultra
hi, i bought a new hd 160 gigs maxtor 7200 , and when i start my computer it show 163 gigs so its ok, i formateed it and in windows it show 127 gigs (ntfs).
well i know we lose some space when format but neber 36 gigs on 163 !.
can someones help me pls? who had the same problem? thanksFor your new hard drive to be recognised correctly by Windows XP you need to have SP1 installed. For details here:- Link If your CD is pre SP1 and you are doing a fresh install on your new drive you could do a slipstreamed install with SP1 included if you have access to a CD writer. Details of how to create the CD are here:- Link
-
Here's my configuration:
DualCore AMD Athlon 64 X2, 2100 MHz (10.5 x 200) 4000+
MSI K9N4 Ultra-F (MS-7310)
2XKingston (1 GB DDR2-533 DDR2 SDRAM)
Using BIOS settings I cannot overclock my CPU for a single MHz. When tried, I had to clear CMOS. Also, I tried to use ntune utilities for overclocking, but when I enter any of those utilities, my computer freezes. That started when I flashed BIOS to a newest version(before overclocking was possible). Now I can't roll it back. Is there any chance to flash previous BIOS through Windows(I'm not familiar with flashing from floppy).
What should I do?Stop updating the BIOS.
Your memory preventing the OC. -
Problems with SiS 745 Ultra with 2600+
Hey all,
I recently had my old system (1700+) die on me when the PSU fried. The mobo also fried (surprisingly, my hard drives, CD-ROMs and RAM was fine--one stick was partially melted, but it works perfectly) and my dad ordered me a new system.
It's the SiS 745 Ultra mobo with a 2600+ (not Barton). The site we ordered from, http://www.pcsourceonline.com had it in a barebones kit. We got the proc, mobo and case and I was under the impression that the proc would work at 2600+ out of the box.
It didn't. We couldn't get it any higher than 2000+. I then checked online and saw that out of the box the 745 only supported up to 2000+, but with a new BIOS it supported 2600+. So I had to find a floppy drive and disk (seriously, who uses these?) and then flash. The flash apparently worked fine, but I was only able to get my CPU to 2400+ at the max.
I changed the FSB to 133MHz, the multiplier to 12.5/13x (14x was down to 667MHz for some reason and 15x was 750MHz), and put the CPU:DRAM ratio to 4:5 and was able to max out at 2400+.
I went to Madison for the weekend and left my computer on because I was downloading some stuff that was going to take all weekend. When I came back, the computer seemed to be fine, until I played Unreal Tournament 2k3 and it told me my proc. speed was only 1150MHz. I rebooted, saw that on the boot screen it was indeed registering as 1150MHz. I went into the BIOS and saw that all the settings were the same. So I don't know what happened. I putzed around a little and was able to get it back to 2000+.
I looked in the manual and saw that the CPU:DRAM ratios were the same for 133-165MHz FSB, so I bumped it up to 165 and restarted. It was at 2400+! But then when i got to the log on screen for windows, the screen was FUBAR and I could get nowhere. I had to put the FSB back to 133, and that's where am I now, stuck at 2000+.
I don't mean to go on a rant or anything, but I'm pretty pissed at how difficult this whole process has been. When you order a computer and the site is set up with drop down menus allowing you to choose from 1800+ - 2600+ CPUs, you would think that the mobo's to choose from would be compatible out of the box. They're not, and only through potentially destroying my motherboard was I able to...get my computer to ALMOST be where it's supposed to be.
I can find nothing online that tells me anywhere how to properly set up the BIOS so that I can use the CPU to it's fullest.
I'm dual booting Windows XP Pro and Windows Server 2003 Enterprise, I have 512 (2x256)MB PC2100 DDR RAM, a 60GB ATA133 7200 RPM Maxtor hard drive, a GeForce4 Ti4400 128MB DDR video card, LiteOn 32x12x48 CD-R and a generic 48x CD-ROM
Any help would be VERY appreciated! Thank you!Thank you, yet again!
I did a little research on MSI Mobos and found the K7N2 Delta-L and K7N2 Delta-ILSR--both of which seem comparable to the Biostar one, if not a little more expensive.
The Delta-L is a mobo choice on the site that I ordered the computer from, its an additional $46 from the base price (the base price that has the MSI SiS 745 Ultra as the standard mobo for all the CPUs you're able to choose from)...so I think I'm going to try and get them to send me that one.
Any objections to the Delta-L board? -
Problems with my FX5700 Ultra-TD128
I have just bought a FX5700 Ultra-TD128 and when I turn my computer on I just get snow with some vertical lines of colour under it. I plugged my old card back in (Geforce 4 MX440) and it works ok. Any help? Is it a damaged card, or incompatability? Please help!
Did you remove the drivers first? Did you plug the molex power cable in? if so your card may be bad. you might want to return it.
One good way to swap cards is too download driver cleaner and install it
http://www.driverheaven.net/cleaner/
Download the 53.03 drivers from nVidia
http://www.nvidia.com/content/drivers/drivers.asp
then unplug the PC from the Internet.... like unpulg your modem(this is important that way the device manager don't download and install the 52.16 drivers from windows update)
1 Remove drivers...add-remove programs
2 reboot into safe mode. run driver cleaner with the wizzard for nVidia and the the cab cleaner(this takes a long time to run like 15min)
3 turn off PC and swap cards and then turn on PC
4 install the drivers you downloaded by dobble clicking to lawnch
Remember to cancel any boxes that pop up asking for a driver disk and shut of anti-virus software before installing drivers
Also make sure that you have the latest Mother board BIOS and the lateset chipset drivers installed.
Let me know how it go's -
NVDIA ASYLUM 5950 ultra 256 ????
I just ran cpu-z and in the agp section there is nothing there?
I have nvidia drivers 6.14.10.5213
there is a section in utility that has
antialiasing settings
and there is a check that says aplication controls selection.
the same for antisotrophic filtering
both have a slider that goes up to 8x
is this were I can set to 8x agp?
and would I move both sliders?
Is this why cpu-z see's (shows no information for agp) ?
thanks guysAntiAliasing and Anisotropic Filtering have nothing to do with AGP transfer speed. I wouldn't mess with those settings till you know what they're for or you may find games not loading.
Of course with that v-card, you should be able to max everything out and still have room play. -
my friend bought a brand new msi board and it was working fine. one day he came home from work and saw it was on so he turned it off to save energy then he went back to work. when he came home he tried to turn it on but nothing not even the post screen all he got were 3 beeps after 15 sec it was on. so he took it apart and looked at it and nothing he could do could fix it. well i came over and looked at it. i cleared the cmos and it started up. i thought it was fixed boy was i wrong. it go into windows and there were no cdroms. so i turned it off and checked the cables they were in all the way and then we truned it on again and then the 3 beeps occured so i cleared the cmos and then nothing... not even the beeps all we got was a blank screen. so i took it apart (all the way) and rebuilt it. 15 mins later i tried it again and nothing.... then i cleared the cmos the 3 beeps occured then nothng... i was getting mad quick. so i took out ide #2(cdroms) and nothing... then i just tried booting with the cdroms i got a post screen and then nothing... why is this happening. it posts fine with no ide or floppy connectors connected to it. but then it crashes. i cleared the cmos changed the bat and done everything i could but nothing. can someone tell me whats up cause im about to take a shotgun to it and finish it..... :P
Hi,
take out your RAM stick(s), and put them back again. Try with one stick first, also try with different slots. If none of the slots work, test your RAM on other machine. It could be your RAM has fully spent its life.
Maybe you are looking for
-
Flash Lite 2.0 Content in Flash Player not loading PNGs
Hi, I have a Flash Lite 2.0 Application, that I'm running on a Phone. I'm loading local PNG files, which works on the phone and in the emulator. The problem is as soon as I run the SWF from Flash Player on my PC it's not working. It seems like it's n
-
Cannot Change Photo Caption in Lightroom 2.3
I am not able to get Lightroom 2.3 to change the caption of photos taken with a Sony A100. The caption reads "Sony DSC." All of my efforts to change this caption to something else have failed, including use of the "Save Metadata to File" command.
-
What happened to the itunes radio tab? It was working yesterday and this morning it has disappeared.
-
How is the impact when a sql server cluster instance failover to a downlevel version node?
Hi, I have a one instance two nodes sql 2012 cluster, node1's sql 2012 version is 11.0.5522, node2's sql 2012 version is 11.0.3000, node1 is active. When sql server failover from node1 to node2, it succeed. I want to konw if this downlevel failover
-
Okay I have custom control based on panel. That contains 2 input text control 1 textarea and a button. I add my panel control in to a viewstack that has 2 canvas. Now My question is that how can I change viewstack canvas when I click that button in t