Problems with games after leopard upgrade

After i upgraded to leopard iv been having trouble with some games (like bf 2142), they wont open, as soon as i click on the game it quits right away, anyone having this problem too? or anyone have any solutions??
:?

Good morning Mogens Pedersen
Thanks for using our forum
I am a Cisco network support engineer, I have a recommendation, before you  upgrade any device in the future. Always keep in mind to make a backup of your data, in this way if you have to reset the device to factory settings you will not lose that information. Having said that, reset the router to the fabric configuration using the back little button, remember when you do that, you are going to loose your current configuration.
Also here I leave a link for you to download the firmware rescue utility for your router:
http://www.cisco.com/cisco/software/release.html?mdfid=282414010&release=4.0.0.7&relind=AVAILABLE&softwareid=282465800&rellifecycle=&reltype=latest
I hope you find this answer useful, if it was satisfactory  for you, please mark the question as Answered
and please rate helpful posts 
Greetings,
Johnnatan Rodriguez Miranda.
Cisco network support engineer

Similar Messages

  • Problem with Java after System Upgrade to 10.5.7

    Hi,
    I am facing problem with Java after having run Software upgrades.
    Here is the whole story. I recently moved to iMac 10.5.6 from PowerPc 10.4. On this new machine I was having problem running a 3rd party application, which requires JVM. As this application worked well on Tiger, I decided to upgrade JVM on my iMAC using Software Upgrade(was I insane!!). As I like my systems to be updated (as with linux on my personal machine) I clicked "install all". As a result I have the following upgrades run on my machine:
    2009-05-20 13:12:01 +0200: Installed "Mac OS X Update Combined" (10.5.7)
    2009-05-20 13:12:10 +0200: Installed "Remote Desktop Client Update" (3.2.2)
    2009-05-20 13:12:26 +0200: Installed "Java For Mac OS X 10.5 Update 2" (1.0)
    2009-05-20 13:58:36 +0200: Installed "Java for Mac OS X 10.5 Update 3" (1.0)
    2009-05-20 13:58:44 +0200: Installed "AirPort Utility Software Update 2009-001" (5.4.1)
    2009-05-20 13:59:07 +0200: Installed "QuickTime" (7.6)
    2009-05-20 13:59:22 +0200: Installed "iPhoto Update" (7.1.5)
    2009-05-20 13:59:28 +0200: Installed "iLife Support" (9.0.2)
    2009-05-20 13:59:38 +0200: Installed "iDVD Update" (7.0.3)
    2009-05-20 13:59:58 +0200: Installed "iTunes" (8.1.1)
    But now, simply running $ java on the prompt hangs, i.e. it takes no action.
    $ which java
    /usr/bin/java
    $ ls -ltr /usr/bin/java
    May 20 15:09 /usr/bin/java -> /System/Library/Frameworks/JavaVM.framework/Versions/Current/Commands/java
    $java (no response)
    Here is the output of $ top
    PID COMMAND %CPU TIME #TH #PRTS #MREGS RPRVT RSHRD RSIZE VSIZE
    703 java 98.8% 0:38.54 3 110 72 480K 184K 1964K 40M
    Any clues?
    cheers

    Hi man,
    In the wake of this java problem I resorted to keep working on my old machine, and today in my spare time I tried to fix this new machine.
    So I execute $java on prompt, and then try to check the files it has opened, using lsof -p pid
    I see it referring to
    /System/Library/Frameworks/JavaVM.framework/Versions/1.5.0/Home/bin/java
    isn't this usually the JAVA_HOME
    However, executing $/System/Library/Frameworks/JavaVM.framework/Versions/1.5.0/Home/bin/java
    hangs!!
    but
    $/System/Library/Frameworks/JavaVM.framework/Versions/1.6.0/Home/bin/java
    works!!
    $ pwd
    /System/Library/Frameworks/JavaVM.framework/Versions/1.6/Home/bin
    $ ./java -version
    java version "1.6.0_07"
    Java(TM) SE Runtime Environment (build 1.6.0_07-b06-153)
    Java HotSpot(TM) 64-Bit Server VM (build 1.6.0_07-b06-57, mixed mode)
    So, I changed the links as follows
    borgraf:Versions raveesh$ l
    total 72
    drwxr-xr-x 3 root wheel 102 Mar 6 2008 1.3.1
    lrwxr-xr-x 1 root wheel 3 May 21 19:42 1.4.1 -> 1.4
    drwxr-xr-x 8 root wheel 272 May 21 19:42 1.6.0
    lrwxr-xr-x 1 root wheel 3 May 21 19:44 OldCurrentJDK -> 1.5
    lrwxr-xr-x 1 root wheel 5 May 21 19:44 1.4 -> 1.4.2
    lrwxr-xr-x 1 root wheel 5 May 21 19:44 1.3 -> 1.3.1
    lrwxr-xr-x 1 root wheel 5 May 21 19:44 1.5 -> 1.5.0
    drwxr-xr-x 8 root wheel 272 May 21 19:44 1.4.2
    drwxr-xr-x 8 root wheel 272 May 21 19:44 1.5.0
    lrwxr-xr-x 1 root wheel 5 May 21 19:44 1.6 -> 1.6.0
    lrwxr-xr-x 1 root wheel 1 May 21 19:44 OldCurrent -> A
    drwxr-xr-x 8 root wheel 272 May 21 19:44 A
    lrwxr-xr-x 1 root wheel 3 Jun 4 17:14 CurrentJDK -> 1.6
    lrwxr-xr-x 1 root wheel 3 Jun 4 17:21 Current -> 1.6
    Linking my Current and CurrentJDK to 1.6 and it works!
    However, shall that be the reason!
    what is in your /Versions/Current/
    I got the following
    $ ls /System/Library/Frameworks/JavaVM.framework/Versions/Current
    CodeResources Frameworks JavaVM
    Commands Headers Resources
    There is no /Home in here, which is usually the case for /1.5 or /1.6
    Anyways, things seems to work for the moment. Lets see if I get problem with using Java.
    thanks

  • Problems with rv042g after software upgrade

    after software upgrade it reboot the router about every 45 sec
    I've tried this tool from the Cisco website RV0xxV3_FirmwareRescueUtility_v4.0.0.7 without success, the problem is there, is a way you can get the router up and running again ?
    Can i run a TFTP server and upload a new software, or i ther a FirmwareRescueUtility for rv042g ??
    Mogens from Demmark

    Good morning Mogens Pedersen
    Thanks for using our forum
    I am a Cisco network support engineer, I have a recommendation, before you  upgrade any device in the future. Always keep in mind to make a backup of your data, in this way if you have to reset the device to factory settings you will not lose that information. Having said that, reset the router to the fabric configuration using the back little button, remember when you do that, you are going to loose your current configuration.
    Also here I leave a link for you to download the firmware rescue utility for your router:
    http://www.cisco.com/cisco/software/release.html?mdfid=282414010&release=4.0.0.7&relind=AVAILABLE&softwareid=282465800&rellifecycle=&reltype=latest
    I hope you find this answer useful, if it was satisfactory  for you, please mark the question as Answered
    and please rate helpful posts 
    Greetings,
    Johnnatan Rodriguez Miranda.
    Cisco network support engineer

  • IPhone Sync Problems with VISTA After iTunes Upgrade to 7.4

    Upon upgrading to iTunes 7.4 I was unable to sync my Outlook calendar or contacts to the iPhone. Called Apple Support that they seemed to know nothing about this problem general problem despite all of the discussions on this and many other tech. boards.
    After being told remove and reinstall iTunes and Outlook, set-up a new user account, etc... (none of which worked) I finally concluded that perhaps the .pst file being used by outlook was simply incompatible with iTunes for some reason (e.g. unsupported recurring calendar items).
    SOLUTION: Create a new outlook .pst data file. Once created, open up that new file along with the defective .pst file. Then, simply change the view of calendars and contacts in your old calendar such that you can see all of the items in a list. Highlight the items you want to keep and simply click-and-drag them to the nes .pst file. This solves all of the sync. problems I had post-7.4 upgrade. It takes less than 3 minutes to complete this painless fix.
    This was so annoying for me that I'd be happy to help someone complete this simple task if they need help. < Edited by Host, for your protection, no personal information please. >

    Then it would appear to be an issue with your router. What router? Model? Is the firmware up to date?

  • Problems with wifi after lion upgrade 10.7.2 but only at home

    HI, my wifi conection was problemless till I upgraded to lion 10.7.2. After that, it is impossible to connect through airport but only in my home´s wifi. Other computers work at home (including my iphone) and my macbook pro connects everywhere else with no problem but it doesn´t at home. Inmediately after choosing the desired conection it says: Not posible to conect due to conection time run out (or something like that).
    Any help?

    Then it would appear to be an issue with your router. What router? Model? Is the firmware up to date?

  • IPhone no longer syncs with iTunes after Leopard upgrade - HELP!

    Not sure if this is the exact forum, but I just upgraded to Leopard and did all the proper software updates and now when I connect my iPhone 3G - iPhoto launches to load the pics like my camera normally does, but when I open iTunes my device does not appear. I tried rebooting both the phone and the computer and I am on iTunes 8. If I look in preferences for devices in iTunes my phone is listed, but it does not seem to want to sync.
    Any and all thoughts are GREATLY appreciated!
    Thanks
    Mike

    I'm having the same problem on my iMac (works on a different phone on my MBP). I restored the iphone and no dice. I'm also constantly getting a beach ball... Hope someone out there knows a workaround.
    Melanie

  • IChat not logging in with AIM after Leopard upgrade

    I just figured out the most crazy problem and I wanted to share it with the community here.
    I used the drop in upgrade DVD to upgrade two macbooks and an iMac. Upon upgrading, iChat would not let one of the users sign into AIM anymore. iChat would say: iChat was unable to login to AOL Instant Messenger because your screen name or password was incorrect.
    OK but if I went to another computer running iChat on Tiger, where the password was saved... It would log in fine. Same password. However, the same password would not work on the AIM website.
    So, I had a client, who was very attached to their AIM username (for years) and they could only log in to AIM on two computers running Tiger where there password was saved. We even went into keychain access, and copied and pasted the password, and voila it was the same password on the computers that worked!
    So the solution was, that AIM specifies passwords should be 6-16 characters. And the user's password was 17 characters. So I tried logging in with the first 16, and it worked!
    What a relief. Such a silly problem but so satisfying to find the answer. Hope this helps someone.

    The 16 character limit is known about.
    It is strange it is listed elsewhere as longer and appears to be working.
    8:29 PM Sunday; May 10, 2009

  • Problems with most recent Leopard upgrade

    Since the most recent upgrade of Leopard, my dual G5 is having major issues: external drives disappear, CS3 will not boot, says it is locked but it is not. Virex software crashes half way thru. iphoto buddy will not open new libraries. My install of Leopard went fine but now I am ready to go back to Tiger.

    Jo Ann Crebbin wrote:
    Since the most recent upgrade of Leopard, my dual G5 is having major issues: external drives disappear, CS3 will not boot, says it is locked but it is not. Virex software crashes half way thru. iphoto buddy will not open new libraries. My install of Leopard went fine but now I am ready to go back to Tiger.
    Virex is not compatible with Leopard. When I migrated, I received a warning to that effect. It's a well-known issue - it crashes partway through a scan.
    It has been replaced by MacAffe's VirusScan 8.6
    Story:
    http://www.jaharmi.com/2007/11/23/mcafeevirusscan_86_installationleopard
    download:
    http://www.versiontracker.com/dyn/moreinfo/macosx/10355

  • Problem with JPGs after Tiger upgrade

    Hi, I normally get answers from this excellent forum by searching, but I can't find anyone who's had the same problem.
    I have a Lacie d2 firewire hard drive, which I've had since I was using a G3 iMac running OS9 (gradually updated to the last version). When I bought a shiny new G5 running Panther everything worked fine and all my existing files opened without any problem. Since upgrading to Tiger, however, I now find that some (not all) JPG picture files that I saved on the external drive with OS9 appear as unix executable and can't be opened. To make matters worse, when I open those files that I can (in Preview), if I make any changes and save, the new version gets saved as a unix executable! Also, I've found some heavily edited images where the thumbnail now shows the ORIGINAL (pre edited) version of the picture - even when the edited version came from someone else and I never had the original!!
    I've now found that the same thing is happening wih pictures on the memory stick duo that I use in my mobile phone, again only with ones that I dragged there with OS9.
    Any ideas on this confusing problem would be very much appreciated.

    First question: do the files have the .jpg extension?
    Second: is the memory stick formatted as FAT32?
    This problem usually crops up because there is a difference in the way OS 9 and OS X store the resource information on a FAT32 volume. Without a resource it can read, and without a .jpg extension, OS X can reach the conclusion that the file in question is a UNIX executable. It should work if you simply add the .jpg extension to the name. When you open and save evidently you are still not getting the extension added to the file name.
    Francine
    Schwieder

  • Problems with Numbers after Mavericks upgrade

    After upgrading to Mavericks my existing spreadsheets do not have the formulas in the open cells.  All previously entered data seems to still be in tact but when putting new data or figures in cells they do not have the formula or format the original spreadsheet had.

    Good morning Mogens Pedersen
    Thanks for using our forum
    I am a Cisco network support engineer, I have a recommendation, before you  upgrade any device in the future. Always keep in mind to make a backup of your data, in this way if you have to reset the device to factory settings you will not lose that information. Having said that, reset the router to the fabric configuration using the back little button, remember when you do that, you are going to loose your current configuration.
    Also here I leave a link for you to download the firmware rescue utility for your router:
    http://www.cisco.com/cisco/software/release.html?mdfid=282414010&release=4.0.0.7&relind=AVAILABLE&softwareid=282465800&rellifecycle=&reltype=latest
    I hope you find this answer useful, if it was satisfactory  for you, please mark the question as Answered
    and please rate helpful posts 
    Greetings,
    Johnnatan Rodriguez Miranda.
    Cisco network support engineer

  • Problems with Calendar after Yosemite upgrade

    I upgraded my macbook pro to Yosemite today, and I also upgraded my phone and ipad to IOS8.   Everything seemed fine afterwards except the Calendar.   My iCloud calendars aren't visible, and when I click the warning sign next to the account name, it says:
    The server at cal.me.com is currently unable to handle the connection for account “*********@me.com” due to a temporary overloading or maintenance of the server. If this continues you should contact the server administrator.
    You may try to connect to the server again.
    I can see the calendars on iCloud on a web browser, so the information is safe.  The account name ends in me.com, but I assume that the MobileMe account just became a normal iCloud account so that shouldn't be a problem.  If I look at deleting the iCloud account from the laptop (in order to reinstate it fresh), it says that this will delete all iCloud content from my computer, which sounds a bit drastic.  So I left the account alone. 
    Has anyone else had this problem?  Advice much appreciated!

    Good morning Mogens Pedersen
    Thanks for using our forum
    I am a Cisco network support engineer, I have a recommendation, before you  upgrade any device in the future. Always keep in mind to make a backup of your data, in this way if you have to reset the device to factory settings you will not lose that information. Having said that, reset the router to the fabric configuration using the back little button, remember when you do that, you are going to loose your current configuration.
    Also here I leave a link for you to download the firmware rescue utility for your router:
    http://www.cisco.com/cisco/software/release.html?mdfid=282414010&release=4.0.0.7&relind=AVAILABLE&softwareid=282465800&rellifecycle=&reltype=latest
    I hope you find this answer useful, if it was satisfactory  for you, please mark the question as Answered
    and please rate helpful posts 
    Greetings,
    Johnnatan Rodriguez Miranda.
    Cisco network support engineer

  • Problems with Bionic after ICS upgrade

    I've had a few issues with the ICS upgrade on my Bionic, but one in particular bothers me the most.  When I get a text or voicemail or other alert at the top of the screen, sometimes I am not able to pull down the menu to check the alert.  That was one of the best shortcuts on the phone. When it gets stuck like that, I have to reboot the phone. This can happen once or twice a day.  Anybody else have that issue or was able to fix it?
    Thanks!

    Clear system cache:
    Power down phone
    Hold volume up/down & power simultaneously
    Use volume down to navigate to 'Recovery', use volume up to select
    Should see screen with triangle and exclamation point next to an Android
    Press volume up/down simultaneously
    Use volume rocker to navigate to 'wipe cache' and use power button to select
    Once finished, use volume rocker to navigate to 'reboot system now' and use power button to select

  • Problems with N76 after software upgrade of PC Sui...

    I downloaded and ran the current Nokia Software Updater which has been installed on my PC and in turn installed and updated all related components.
    I then followed the instructions to a tee, backed up files, via content copier, updated my N76 with the latest version of the Device software. Upon the phone restarting, all was good and the phone asked me for my country, state and date and time. When I check Device Manager it advises that I have V31.0.014 and that the Device is Updated with current date. Upon checking the Sync folder Lifeblog and PC Suite are both DEFINE and dated.
    Before having had a chance to restore from my backup, I received some text messages with pics which I uploaded to my PC Lifeblog with no problems.
    I then restored the backup file with great ease, so that I could have my contacts etc back on my phone.
    Only problem is that it seems like not only files are restored but also any previous phone settings. I have gone through the whole process three times and each time I restore when I check the Device Manager it tells me that the phone has previous version on it and that the Device has not been updated. Also when I check the Sync folder it tells me that the PC suite (is not defined)and if I try to change any settings manually it advises that the profiles are READ ONLY.
    HOW CAN I FIX THIS IT IS DRIVING ME NUTS!

    Hey, did you get this fixed?

  • Problems with iChat after Leopard installed

    When I tried to log in to iChat for the first time a box comes up saying it "unexpectedly closed" and asks me to Relaunch or Report. It has done this numerous times and never did this when I had Tiger.
    Please help!

    Okay, at long last I have the solution that worked for me.
    I first called Apple support, which enabled me to chat with my father (both using MBP's on Leopard) as long as we were on the same network. However, when I returned home and we were on separate networks, it was a NO GO.....totally frustrating.
    Today, as I read an article on Macworld about using the Firewall in Leopard, I realized that I had it set incorrectly. So, I set it to “Set access for specific services and applications” in the firewall section, then got my Dad to do the same and........wait for it......BOOM! We were FINALLY good to go. I just converted my Dad to Mac so this was a real thorn in our sides not to be able to use iChat. I'm miffed tht I couldn't get a complete answer from Apple, but ultimately I'm just glad it's up and working.
    Hope this works for you all! Here's the article at Macworld I mentioned. It really helped me to understand Leopards firewall a bit more.: http://www.macworld.com/article/131116/2007/12/firewall.html

  • Problems with X4150 after ILOM upgrade to 3.2.0

    I am running Netbackup PureDisk OS (PDOS) 6.5 on a Sun X4150.
    I was trying to upgrade to PDOS 6.6 and during the upgrade
    process found the version of the ILOM installed on the server,
    2.0.2.6, was very out of date. I installed the newest ILOM
    version: 3.2.0 and it seems to have been successful. When
    I rebooted the PDOS system, however, I was met with this
    screen on the ILOM redirection: was

    I was trying to add this link to show what I see on the
    redirection screen:
    http://www.cs.unca.edu/~benites/detached/ilom.png
    Even though I add and save the keyboard as a device in the
    redirection window I cannot use any of the function
    keys on Ultra 45 keyboard where the ILOM redirection
    screen is displayed.
    Any suggestions?
    Thanks!

Maybe you are looking for