Problems with GCC version - compiling OpenOffice

I am trying to compile OpenOffice 4.1.1 to run on 10.6.8. When I run the ./configure it runs for a few seconds then shows the following error:
"checking the GNU gcc compiler version... configure: error: found version "1.0.2", use version 3+ of the gcc compiler"
If I run:
gcc -v
I get:
gcc version 4.2.1 (Apple Inc. build 5659)
Any ideas on how to fix this?
Thanks

I suppose the real incentive is to be able to just continue using 10.6. But it seems from other feedback that the problem with OpenOffice 4.1 is dependencies on libraries in 10.7, rather than the GCC version. I know that I could probably eventually code around those dependencies, but it would certainly involve more time and effort than I am currently able to devote to it.
I have tried LibreOffice in the past, but frankly I found it so horrible and slow (I think because of its dependency on Java) that I ended up using the X11 version of OpenOffice - which in itself was not a terrific user experience, but was a lot better than the alternative.
I will try the version you have mentioned, but I also note that this is planned to be obsolete by May next year, and is also the last version that will support 10.6 or 10.7 (10.8 will be the lowest requirement). Which will leave a fair number of 64-bit intel machines unsupported, since some of those are only able to run 10.7. Thanks for the feedback.

Similar Messages

Problem with new version 4.3.2 apps not working " after update to the new version "

Problem with new version 4.3.2 apps not working " after update to the new version "
i was in 4.3.1 then i do the update , but now after update i face this problem , so what i Supposed to do ?!!

Hi There
Had the same problem as you. App would terminate when launched.
Solution to working You Tube app:
-Go to playstore
- Uninstall app (it doesn't remove the app, only removes the update)
- "Et Voila", working again.
This doesn't correct the problem, it's just a workaround for you to be able to use youtube app again.
Hope it helped.
Best Regards

Reader 9 - problem with pdf version 1.0 and descenders

2 big problems over here:
* Reader9 will not properly open files created as pdf version 1.0/1.x
all text is cut off about 2/3 of the way down, whether or not in fields.
* Any pdf file version above 1.0created with any version of GhostScript does not have the previous issue, However - no descenders of any font are coming out.
We do not have either problems with any version of Reader prior to 9

Hi creamac,
Welcome to communites
Please install vmware tool and then on vmware task bar select connect or unplug usb drive . You
will find that on right hand corner above to task bar of host machine .
"Nature always wears the colors of the spirit."

Problems with Italian version of Dreamweaver [subject edited by moderator]

The italian version of this software doesn't match with the configurations in the tutorials and it's impossible to follow the procedure to learn how to use it!! I've spent more than two hours just to put the "split working area" in vertical with no results. No way to open the same tools. And then, where are the assets files to download??? I think it could be a wonderful idea give us something easier to learn, simply having giving us the right correspondence between the software (open for the first time after the download) and the video tutorials…please, in this condition I cannot work and so how can I do?
Ciao
Paolo

Dear Murray,
unfortunately I can't go on with this program…it's impossible without the CSS file showed on the tutorial…I've also tried to find something on the web and I've tried to install Adobe Widget Browser but it doesn't work!
So I've lost a lot of hours and I'm very frustrated and disappointed…and then the Dreamweaver CC version I've downloaded from Creative Cloud is different from the one in the tutorials, so I can follow all the indications without stop and start searching somewhere the things…
In this condition it's impossible to learn how to use this software…it's an incredible waste of time…and paying for that!!
Il giorno 01/mar/2015, alle ore 20:17, paolo <[email protected]> ha scritto:
I'm using just CC…
Il giorno 01/mar/2015, alle ore 16:46, MurraySummers <[email protected]> ha scritto:
>>
>> Problems with Italian version of Dreamweaver
>> created by MurraySummers in Dreamweaver support forum - View the full discussion
>> Different language versions of the same version of DW are the same. What I mean by that is that no matter which REGIONALIZED version you are using, the interface should be the same. So even though you say you are using DW CC, is it CC2014, or CC2014.1, or just CC that you are using? (you can tell by looking under HELP > About Dreamweaver)
>>
>>
>> On this page - How to make and style a web page in Dreamweaver | Adobe Dreamweaver CC tutorials - there is a link to download the sample files right under the "Browse Dreamweaver CC Tutorials".
>>
>> If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7240860#7240860 and clicking ‘Correct’ below the answer
>> Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
>> Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7240860#7240860
>> To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following"
>> Start a new discussion in Dreamweaver support forum by email or at Adobe Community
>> For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624.
>

TS5376 I'm having problems with install version 11.1.4. If I uninstall and reinstall will I lose all my downloaded music?

I'm having problems with install version 11.1.4. If I uninstall and reinstall will I lose all my downloaded music?

Hi, so did I. It seems to be a huge problem with everyone. I opened a folder on desktop and called it target. I copied all my songs into that folder.
I uninstalled Itunes completely. Rebooted. Then I installed a fresh install.
I then dragged all the songs back to Itunes and it worked. I hope that helps.
I read an article the other day and apple is suppose to come out with some genius fix for this problem, it really seems to be global.
Good luck,

Problem with multiple versions of documents being published with 001, 002, etc.

I am using Contribute CS3. I am having a problem with multiple versions of documents being published on the sever with 001, 002, etc in the name. So that I end up with 2 or 3 versions of a document on the server. Does anyone know why / how Contribute is doing this? Thanks for any help you can give.

Your Web site administrator will need to update your key to allow you to delete files you are able to edit.

Problems with current version of AIR. Won't load and also can't uninstall

I have recently purchased a new Mac and loaded the most recent version of AIR but now when I try to run it I keep getting the following message
This application requires a version of Adobe AIR which cannot be found.
Please download the latest version of the runtime from
http://www.adobe.com/go/getair,
or contact the application author for an updated version.
I am also getting this message when I try and run the uninstaller so I can I can try and re-install.
Does anyone have any suggestions?
Thanks.

I had AIR 3 on my MacBook Pro before I updated it to Lion. I use AIR 3 to run McMillan Study guides Master your CDCs. when I updated my mac to lion and tried to run the application the application couldn't find AIR 3 on my mac. So I uninstalled it and tried to install it again. when I tried to install it the installer program doesn't open. please help me this program is crucial for my upgrade training.
From: lisachao <[email protected]>
To: A1C PD <[email protected]>
Sent: Monday, October 24, 2011 12:35 PM
Subject: Problems with current version of AIR. Won't load and also can't uninstall
Re: Problems with current version of AIR. Won't load and also can't uninstall created by lisachao in Installation Issues - View the full discussion
Is this the error you are getting when you are installing AIR 3.0? Or is this the error you are getting after you've already installed AIR 3.0 and attempting to run AIR applications? If it's the latter, which applications are you trying to run? Can you please send us your logs so that we can investigate further? Thanks!
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/3987820#3987820
To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/3987820#3987820. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Installation Issues by email or at Adobe Forums
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

Problem with latest version of firefox 15.0.1,whenever i download video from youtube or any other site using idm it shows .webm format instead of flv or mp4.

problem with latest version of firefox 15.0.1,whenever i download video from youtube or any other site using idm it shows only .webm format to download instead of flv or mp4.previous version works fine.also other browsers work fine.

Clear the cache and the cookies from sites that cause problems.
"Clear the Cache":
*Tools > Options > Advanced > Network > Cached Web Content: "Clear Now"
"Remove Cookies" from sites causing problems:
*Tools > Options > Privacy > Cookies: "Show Cookies"
*http://kb.mozillazine.org/Cookies

HT3775 I'm using version 10.7.5 OSX. I can't play or use the normal AVI recently. Some problem with (codecs version incompatible with OSX) Please give me some help. I'm in Vietnam and to have a real place to have stuffs from Apple is ****-

I'm using version 10.7.5 OSX. I can't play or use the normal AVI recently. Some problem with (codecs version incompatible with OSX) Please give me some help. I'm in Vietnam and to have a real place to have stuffs from Apple is ****…

I would recommend that you download and install the excellent and Free "VLCPlayer for Mac", which reads many more types of files for video than Quicktime Player:
http://vlc-media-player.en.softonic.com/mac

Problems with latest version of Muse

I'd like to report some problems with latest version of Muse. Its actually all related with scroll effect.
1. In previous version I had a group of rectangles and when I added to them motion (initial motion: 0 everywhere, final motion: 0 everywhere) they where sliding nicely down during scrolling my page, and it happened only in y line (horizontally). Now its moving also on the right and left, when I am changing size of window. Other thing is that in firefox this group of rectangles is pinned to bottom of window.
2. I have footer that I want to be always pinned to the bottom of window. The footer is a group of objects: rectangle + one png file with hyperlink, and one text with hyperlink - and of course it worked perfectly in previous version, but now finally when I export the page I have only the rectangle without hyperlink on the bottom of the page and the rest is missing.
I hope I explained it clearly? I did my best :-)

I have a same problem like no.2.
Finally, I fixed it.
First, You have to ungroup the footer objecs.
Second, Group again that.
Then export your site.
Please try this!
I hope this will be of some help.

Scrolling with the mouse wheel does not always work with 4.0? Never a problem with previsous versions.

in firefox 4.0, at times the scrolling wheel will not work. It has never been a problem with previous versions, and always works in internet explorer.

Hello Henry,
Thanks for the hint!
My mouse wheel is working, but not in flash player...strange... It is a Microsoft Comfort Mouse and I see there is already logged bug about that: https://bugs.adobe.com/jira/browse/FP-5145
Anyway besides this bug, there is an additional issue I think, that the vertical layout does not calculate properly the vertical scroll position, when certain elements are excluded from the layout. I have described this additionally in the Jira.
Regards,
Dinko

Problem with gcc -pg

Hello,
I have a problem using profiling on solaris 8 using gcc. When I compile a small test program with gcc -g -pg, it compiles and runs correctly. However, when I build my main application using the same flags at the compilationa and likning steps, the build completes successfully but
the application gives a segemntation fault. Is it a bug? Does gcc have a problem profiling in presence of threads or shared libs?
Thanks in advance,
Rajsekhar Bhattacharjee (Raj)
The relevant details are as follows:
OS (using uname -a): SunOS 5.8 Generic_108528-15 sun4u sparc SUNW,Sun-Blade-100
gcc version (using gcc -v): gcc version 2.95.3 20010315 (release)
debugger output :
GNU gdb 5.0
Copyright 2000 Free Software Foundation, Inc.
GDB is free software, covered by the GNU General Public License, and you are
welcome to change it and/or distribute copies of it under certain conditions.
Type "show copying" to see the conditions.
There is absolutely no warranty for GDB. Type "show warranty" for details.
This GDB was configured as "sparc-sun-solaris2.8"...
Core was generated by `/home/raja/zentime/bin/solaris/gprof/zentime /mnt/elmer/export/home1/TestSyst
em'.
Program terminated with signal 11, Segmentation Fault.
Reading symbols from /usr/lib/libdl.so.1...done.
Loaded symbols for /usr/lib/libdl.so.1
Reading symbols from /usr/lib/libpthread.so.1...done.
Loaded symbols for /usr/lib/libpthread.so.1
Reading symbols from /usr/lib/libcurses.so.1...done.
Loaded symbols for /usr/lib/libcurses.so.1
Reading symbols from /usr/lib/libsocket.so.1...done.
Loaded symbols for /usr/lib/libsocket.so.1
Reading symbols from /usr/lib/libnsl.so.1...done.
Loaded symbols for /usr/lib/libnsl.so.1
Reading symbols from /usr/openwin/lib/libX11.so.4...done.
Loaded symbols for /usr/openwin/lib/libX11.so.4
Reading symbols from /usr/lib/libc.so.1...done.
Loaded symbols for /usr/lib/libc.so.1
Reading symbols from /usr/lib/libmp.so.2...done.
Loaded symbols for /usr/lib/libmp.so.2
Reading symbols from /usr/openwin/lib/libXext.so.0...done.
Loaded symbols for /usr/openwin/lib/libXext.so.0
Reading symbols from /usr/lib/libthread.so.1...done.
Loaded symbols for /usr/lib/libthread.so.1
Reading symbols from /usr/platform/SUNW,Ultra-1/lib/libc_psr.so.1...done.
Loaded symbols for /usr/platform/SUNW,Ultra-1/lib/libc_psr.so.1
#0 0xfd7dbe8c in __csigsetjmp () from /usr/lib/libthread.so.1
(gdb)

Hi,
we have the same Problem with the inline assembler. We are using Sunstudio 12 on x86 and tried to get this code compiled (Sunstudio 12 should be gas compatible).
any ideas ?
thanks
Dieter
#define HEC_HTONF(x) \
(__extension__ \
register HVB::float32_t __v, __x = (x); \
__asm__ ( \
"bswap %0" \
: "=r" (__v) \
: "0" (__x) \
__v; \
#define HEC_HTONLF_INPLACE(x) \
__asm__ ( \
"leal %0, %%ecx \n\t" \
"movl (%%ecx), %%eax \n\t" \
"movl 4(%%ecx), %%edx \n\t" \
"bswap %%eax \n\t" \
"bswap %%edx \n\t" \
"movl %%eax, 4(%%ecx) \n\t" \
"movl %%edx, (%%ecx) \n\t" \
: "=m" (x) \
: "m" (x) \
: "%eax", "%ecx", "%edx" \
);

Problem with gcc-like inline assembly in cc

Hi,
I am trying to compile the following code for a sparc machine using sun studio 12.
#define MAGIC(n) asm("sethi %0, %%g0" : :"g"(n));
int main(int argc, char **argv)
        int x=1;
        MAGIC(x);
        return 0;
}I am using the following command:
cc -xO3 -xtarget=ultra2 -m32 -xarch=sparcvis -xregs=no%appl -w test.c -o test
and I get the following error:
cg error (as) : "__gnu_asm_inline_fake_test.c (template for __gnu_asm_inline_temp_func_001)", line 1 : statement syntax
cc: cg failed for test.c
Isn't Sun cc supposed to support gcc-like inline assembly? If so, what is the problem with the code above?
Thanks in advance,
Nick

Hi,
we have the same Problem with the inline assembler. We are using Sunstudio 12 on x86 and tried to get this code compiled (Sunstudio 12 should be gas compatible).
any ideas ?
thanks
Dieter
#define HEC_HTONF(x) \
(__extension__ \
register HVB::float32_t __v, __x = (x); \
__asm__ ( \
"bswap %0" \
: "=r" (__v) \
: "0" (__x) \
__v; \
#define HEC_HTONLF_INPLACE(x) \
__asm__ ( \
"leal %0, %%ecx \n\t" \
"movl (%%ecx), %%eax \n\t" \
"movl 4(%%ecx), %%edx \n\t" \
"bswap %%eax \n\t" \
"bswap %%edx \n\t" \
"movl %%eax, 4(%%ecx) \n\t" \
"movl %%edx, (%%ecx) \n\t" \
: "=m" (x) \
: "m" (x) \
: "%eax", "%ecx", "%edx" \
);

[SOLVED] (PKGBUILD) problem with makepkg for go-openoffice

[SOLVED]: In the PKGBUILD, there's a function before build(), named mksource() and a comment "source PKGBUILD && mksource".
Just run it first, then copy the "/tmp/go-openoffice-source/go-openoffice-ooo320-m12.tar.xz", run "makepkg -s" as usual.
Thanks :D
Hi, I tried to makepkg for extra/go-openoffice (from abs) by using "makepkg -s" on my x86_64 laptop, and get the following error (before the build begin):
==> ERROR: go-openoffice-ooo320-m12.tar.xz was not found in the build directory and is not a URL.
I understand that this comes from
pkgname=go-openoffice
_ootag=ooo320-m12 # m12 = OOo 3.2.0 RC5
source=(${_mirror}/${_go_tree}/ooo-build-${_GOver}.tar.gz
ArchLinux.patch
${pkgname}-${_ootag}.tar.xz
But, I don't know where to find this "go-openoffice-ooo320-m12.tar.xz". Can you please help me to figure out where to find it? Thank you!
Following is the PKGBUILD for extra/go-openoffice (from abs)
# $Id: PKGBUILD 74152 2010-03-30 17:02:00Z andyrtr $
# Maintainer: AndyRTR <[email protected]>
pkgname=go-openoffice
_GOver=3.2.0.9 # = post OOo 3.2.0 final bugfix
pkgver=${_GOver}
pkgrel=1
pkgdesc="OpenOffice.org - go-oo.org enhanced version of SUN's office suite"
arch=('i686' 'x86_64')
_go_tree="OOO320"
_ootag=ooo320-m12 # m12 = OOo 3.2.0 RC5
license=('LGPL3')
url="http://go-oo.org/"
install=${pkgname}.install
depends=("curl>=7.19.6" "hunspell>=1.2.8" "python>=2.6.4" 'libwpd' 'redland>=1.0.10'
'libxaw' "neon>=0.28.6" "icu>=4.2.1" 'hsqldb-java' 'libxslt' 'libxtst' 'lpsolve'
'beanshell' 'saxon' 'vigra' 'hyphen' 'libmspack' 'libldap' 'gtk2' 'lucene'
'hicolor-icon-theme' 'shared-mime-info' 'desktop-file-utils') # 'libmythes' 'libgraphite'
optdepends=('java-runtime: adds java support'
'libcups: adds printing support'
'gconf: adds additional gnome support'
'nss: adds support for signed files/macros'
'pstoedit: translates PostScript and PDF graphics into other vector formats'
'poppler: for the pdfimport extension'
'mesa: for the OGLTrans extension'
'mono: allows UNO automation with Mono'
'gstreamer0.10-base: + some gstr-plugins to support multimedia content, e.g. in impress'
'kdelibs: for kde integration')
makedepends=('automake' 'autoconf' 'wget' 'bison' 'findutils' 'flex' 'gawk' 'gcc-libs' 'libart-lgpl'
'pam' 'sane' 'perl-archive-zip' 'pkgconfig' 'unzip' 'zip' "xulrunner>=1.9.2-4" 'apache-ant' 'cairo'
'gperf' 'libcups' 'pstoedit' 'gconf' "openjdk6>=1.5.2" 'unixodbc' 'mesa>=7.5' 'poppler>=0.10.7'
'gstreamer0.10-base>=0.10.26' 'mono>=2.6.1' 'kdelibs>=4.4.0' 'libjpeg' 'boost' 'git' 'rsync')
backup=(usr/lib/go-openoffice/program/sofficerc)
provides=('openoffice-base')
conflicts=('openoffice-base')
_mirror="http://download.go-oo.org/"
source=(${_mirror}/${_go_tree}/ooo-build-${_GOver}.tar.gz
ArchLinux.patch
${pkgname}-${_ootag}.tar.xz
http://download.go-oo.org//DEV300/ooo-cli-prebuilt-3.2.tar.bz2
http://cairographics.org/releases//cairo-1.4.10.tar.gz
http://download.go-oo.org//SRC680/mdbtools-0.6pre1.tar.gz
http://download.go-oo.org//SRC680/extras-3.tar.bz2
http://download.go-oo.org//SRC680/biblio.tar.bz2
http://tools.openoffice.org/unowinreg_prebuild/680//unowinreg.dll
http://download.go-oo.org//DEV300/scsolver.2008-10-30.tar.bz2
http://download.go-oo.org//libwpd/libwpd-0.8.14.tar.gz
http://download.go-oo.org//SRC680/libwps-0.1.2.tar.gz
http://download.go-oo.org//SRC680/libwpg-0.1.3.tar.gz
http://download.go-oo.org//DEV300/ooo_oxygen_images-2009-06-17.tar.gz
http://download.go-oo.org/src//seamonkey-1.1.14.source.tar.gz
http://archive.apache.org/dist/ant/binaries/apache-ant-1.7.0-bin.tar.gz
buildfix_64bit_system_libjpeg.diff
system-redland.patch
localize-ooo.diff)
#options=('!distcc' '!ccache' '!makeflags')
options=('!makeflags')
noextract=(ooo-cli-prebuilt-3.2.tar.bz2 cairo-1.4.10.tar.gz mdbtools-0.6pre1.tar.gz extras-3.tar.bz2 biblio.tar.bz2 unowinreg.dll
scsolver.2008-10-30.tar.bz2 libwpd-0.8.14.tar.gz libwps-0.1.2.tar.gz libwpg-0.1.3.tar.gz ooo_oxygen_images-2009-06-17.tar.gz)
# source PKGBUILD && mksource
mksource() {
mkdir /tmp/$pkgname-source
pushd /tmp/$pkgname-source
wget ${_mirror}/${_go_tree}/ooo-build-${_GOver}.tar.gz
tar -xvf ooo-build-${_GOver}.tar.gz
cd ooo-build-${_GOver}
./configure --quiet --with-distro=ArchLinux
./download --all
pushd src; tar -cvJf ../../${pkgname}-${_ootag}.tar.xz clone; popd
popd
build() {
unset J2REDIR; unset J2SDKDIR; unset JAVA_HOME; unset CLASSPATH
[ -z "${JAVA_HOME}" ] && . /etc/profile.d/openjdk6.sh
[ -z "${MOZ_PLUGIN_PATH}" ] && . /etc/profile.d/mozilla-common.sh
[ -z "${ANT_HOME}" ] && . /etc/profile.d/apache-ant.sh
cd ${srcdir}/ooo-build-${_GOver}
# our ArchLinux distribution patch until we go upstream
patch -Np0 -i ${srcdir}/ArchLinux.patch || return 1
# buildfix for broken language settings in build
patch -Np0 -i ${srcdir}/localize-ooo.diff || return 1
# fix bugs with recent system redland
patch -Np1 -i ${srcdir}/system-redland.patch || return 1
# hotfixes not yet upstream
# cp ${srcdir}/*.diff ${srcdir}/ooo-build-${_GOver}/patches/hotfixes/
cp ${srcdir}/buildfix_64bit_system_libjpeg.diff ${srcdir}/ooo-build-${_GOver}/patches/hotfixes/
# export C(XX)FLAGS
# http://www.openoffice.org/issues/show_bug.cgi?id=103205
unset CFLAGS
unset CXXFLAGS
# export ARCH_FLAGS="$CFLAGS"
if [ "$CARCH" = "x86_64" ]; then
EXTRAOPTS="--without-stlport"
else EXTRAOPTS="--with-stlport"
fi
# autoreconf
./configure --with-distro=ArchLinux \
--with-build-version="${_GOver} ArchLinux build-${pkgrel} (${_ootag})"\
--with-srcdir=${srcdir} \
--with-max-jobs=${MAKEFLAGS/-j/} \
--with-installed-ooo-dirname="${pkgname}" \
--prefix=/usr --exec-prefix=/usr --sysconfdir=/etc \
--with-docdir=/usr/share/doc/packages/"${pkgname}" \
--mandir=/usr/share/man \
--with-lang="" \
--with-dict=ALL\
--with-binsuffix=no \
--disable-ldap \
--enable-cairo\
--disable-kde\
--enable-kde4\
--enable-lockdown\
--with-system-boost\
--with-system-cairo\
--enable-crashdump\
--without-gpc\
--enable-opengl \
--enable-minimizer \
--enable-presenter-console \
--enable-pdfimport \
--enable-wiki-publisher \
--enable-ogltrans \
--with-ant-home="/usr/share/java/apache-ant"\
--with-system-saxon\
--with-saxon-jar=/usr/share/java/saxon/saxon9he.jar\
--with-system-lucene\
--with-lucene-core-jar=/usr/share/java/lucene-core.jar\
--with-lucene-analyzers-jar=/usr/share/java/lucene-analyzers.jar\
--with-system-beanshell\
--with-system-vigra\
--with-system-altlinuxhyph\
--with-system-lpsolve\
$EXTRAOPTS || return 1
# --with-system-mythes\
# --with-system-graphite\
# --with-tag=${_ootag}
# --enable-report-builder \
# --with-additional-sections="OOXMLExport"
unset MAKEFLAGS
# ./download
LD_PRELOAD="" make || return 1
package() {
cd ${srcdir}/ooo-build-${_GOver}
LD_PRELOAD="" make DESTDIR=${pkgdir} install || return 1
# install all built dictionaries from source tree
pushd ${srcdir}/ooo-build-${_GOver}/build/${_ootag}/dictionaries/unxlng?6.pro/bin/
for i in `ls -1 dict-??.oxt`; do
install -D -m644 $i ${pkgdir}/usr/lib/"${pkgname}"/share/extension/install/$i || return 1
done
popd
# install all other built extensions
pushd ${srcdir}/ooo-build-${_GOver}/build/${_ootag}/solver/320/unxlng?6.pro/bin/
install -m644 pdfimport/pdfimport.oxt ${pkgdir}/usr/lib/"${pkgname}"/share/extension/install/pdfimport.oxt || return 1
install -m644 swext/wiki-publisher.oxt ${pkgdir}/usr/lib/"${pkgname}"/share/extension/install/wiki-publisher.oxt || return 1
install -m644 minimizer/sun-presentation-minimizer.oxt ${pkgdir}/usr/lib/"${pkgname}"/share/extension/install/sun-presentation-minimizer.oxt || return 1
install -m644 presenter/presenter-screen.oxt ${pkgdir}/usr/lib/"${pkgname}"/share/extension/install/presenter-screen.oxt || return 1
popd
# fix unopkg call for mktemp, #15410
sed -i "s:\/bin\/mktemp:\/usr\/bin\/mktemp:" ${pkgdir}/usr/lib/go-openoffice/program/unopkg || return 1
#fix http://bugs.archlinux.org/task/17656
find ${pkgdir} -perm 444 -exec ls -lh {} \;
find ${pkgdir} -perm 444 -exec chmod 644 {} \;
find ${pkgdir} -perm 555 -exec ls -lh {} \;
find ${pkgdir} -perm 555 -exec chmod 755 {} \;
Last edited by timefairy (2010-04-08 10:41:35)

jryarch wrote:Thanks for your response, how do I actually run it automated? I'm doing it manual right now, but I suppose that's not the idea.
I suppose that the function can be run as $1, I don't know (I mean `bash PKGBUILD mksource`). Nevertheless, you know what to do now
Last edited by flamelab (2010-04-07 11:44:58)

Darwin and problem with gcc

Hi,
I'm trying to compile c-programs with gcc installed with the xtools from the tiger 1.4.8-cd on my system. For the first step I tried a "Hello World" program.
When I compile it with 'gcc HelloWorld.cpp' on a linux system I get a a.out, and this is the program, that tells me "Hello World!".
When I try
"me$ gcc HelloWorld.cpp"
on my MacBook, then I get the error message
"/usr/bin/ld: Undefined symbols:
__gxx_personalityv0
collect2: ld returned 1 exit status"
What is wrong on my system?
Can anyone please help me to solve this problem?
Best regards,
Boltzmann
The source code is ;-):
#include<stdio.h>
int main()
printf("Hello World!");
return 0;
MacBook 13" Mac OS X (10.4.8) 1gb ram; 1.83Mhz; 60gb disk space

Name the file HelloWorld.c; .cpp is for C++. If you want to compile C++, use g++, which links to the proper libraries for C++.

Problems with GCC version - compiling OpenOffice

Similar Messages

Maybe you are looking for