Problems with grahic card on my Satellite A60-672

I have a Satellite A60-672 which has graphics by ATI. On a number of occasions on start up it has crashed and the online crash system says everytime that it is ATI technologies. I have emailed ATI and they said it is nothing to do with them.
I have tried to email toshiba but none of the address work. The crash system tells me to uninstall the software but seeing as I didnt put it on, i am wary about doing this as it might muck up the operation of my laptop.
Currently my laptop works fine with this continuous problem. Has this happened to anyone else or does any one know how to contact toshiba.
Thanks

Hi,
here is a url where you could choose your country. Then you have to choose PC systems, after a new site is shown and there is on the left side a telephone number from the Toshiba infoline. They could say you the country specific number for the Toshiba Support hotline!
http://www.toshiba.co.jp/worldwide/europe.html
Bye and a happy new year!
TOK

Similar Messages

  • Problem with RSC card on sun fire v490

    Hi all,
    I have a little problem.
    I got few v490 that were already used.
    When I connect to the management port of the RSC card I get the prompt of the RSC password, somthing i don't have.
    The OS doesn't get loaded and I can't do anything. ( if I had access to the OS I would have reseted the password)
    So now, I got left with the only option i thought of.
    1. Disconnect the RSC card,
    2. This will force the output of the consol to go to the serial port(tty).
    3. Jumpstart the machine (beacuse I don't even have the password for the machine)
    4. connect the RSC card, and reset the password.
    There is someone here that encountered this problem??
    Maybe there is a jumper that can reset the RSC password. i don't know... every response will be great!
    Thanks!!!

    Hi,How to set my link up in solaris 10 ?
    I dont know want happend to my machine solaris v440 it suddenly disconnected from n/w and finally i came to know that is a problem with NIC card..i din't find any light's glowing back side of the machine at NIC card.
    can any one help me in this pls how can i proceed furture for getting my NIC back?
    and i have excuted few commands
    #ndd -set /dev/ce instance 0
    #ndd -set /dev/ce adv_1000fdx_cap 1
    #ndd -set /dev/ce adv_autoneg_cap 0
    I have got dladm show-dev is
    ce0 link: unknown speed: 1000 Mbps duplex: full
    ce1 link: unknown speed: 0 Mbps duplex: unknown
    I dont understand that why my link is showing still unknown ...any help..

  • Problem with SD card reader

    I have problem with 4-in-1 card reader in my laptop.
    When I insert 64 MB microSD (with adapter of course) everything is working fine, but 1024 MB microSD isn't working. dmesg shows
    mmc0: unrecognised SCR structure version 1
    mmc0: error 4 whilst initialising SD card
    The card is allright, because in my friend's laptoptop it works fine.
    Can somebody help me?

    Hi
    I had a problem with my card reader also.
    When I run the command "groups" noticed my user wasn't in the avahi group.
    Ran :
    sudo gpasswd -a <myuser> avahi
    (substitute "<myuser>" by your user)
    Inserted the card again and.. voila, it worked!
    Greets
    Nuno lopes

  • Yoga 11s Problem with SD Card reader

    Hi.
    Just bought a Yoga s11 8/256gb with windows 8 64bit.
    When i put in the SDHC card (Is use in camera) in the SD card reader nothing happends..
    Tried to download drivers, but not sure if i got the correct one.

    Hi
    I had a problem with my card reader also.
    When I run the command "groups" noticed my user wasn't in the avahi group.
    Ran :
    sudo gpasswd -a <myuser> avahi
    (substitute "<myuser>" by your user)
    Inserted the card again and.. voila, it worked!
    Greets
    Nuno lopes

  • My phone is iphone 4 (GSM)-american type with IOS5.11 , i have problem with sim card failer (korek type)

    my phone is iphone 4 (GSM)-american type with IOS5.011 , i have problem with sim card failer (korek type)

    Sounds like your iPhone is locked to AT&T. Contact them to see
    if you qualify for unlocking.
    This link may provide some assistance:
    unlocking AT&T iPhones (thanks to wjosten for the link)
    http://www.att.com/esupport/article.jsp?sid=KB414532#fbid=Ont7guWFCdY

  • Mega Player 536 problems with SD Card

    Hello, can any one help me here, i got me MSI mega player 536 , but i can't play files from SD card. I tried 4. diferent types of SD card. Player register the card, but when i try to open files i got message: "No files fund". I found test of player on www.hw.no, and they write in the test that Player has problems with SD card.
    Any one?

    It's hardware problem with player, i'll get a new one. Then we have to conclude that Mega player 536 has not problems with SD card. Thank's to every one on this forum.

  • Problems with Visa Card

    Hey guys, how are you?
    I just bought an IPhone and I´m trying to get some apps from the ITunes Store.
    I created an account but when I try to put my credit card number and security code (from the verse of the card), I get the error script: "Please enter valid Security Code".
    I don´t have any problem with my card, it´s working absolutelly normal with any other online shop around the world including Amazon, Ebay, etc...but in the ITunes store, I get this crap error!
    I just have this credit card and I don´t wanna do another from Credicard or Amex only because a bug of the system.
    Doing a research in past topics, I found other people with the same issue, but didn´t get any answer on how to solve this.
    Please, can someone help me?

    Contact iTunes.
    Apple - Support - iTunes - Contact Us

  • Problems with Airport Card

    I move back and forth from school to home, and I've never had a problem with my card before. I recently restored my compuer back to its factory settings, and it was running great with my Airport Express. I came home after moving, and my computer won't read the WPA hooked up in my house. It says I am connected, but won't let me access the internet. I'm not sure why. We tried rebooting the connection, I've looked on my computer, used system preferences and everything. I did notice when I tried to use the Network Setup Assistant, it said the password I used to connect was wrong, but when my computer uses the airport icon at the corner of the screen, it accepts the password. Any ideas on how to fix this?
    iBook G4   Mac OS X (10.3.9)  

    An additional distressing note -- I went back to aforementioned building with the 10.4.5 Powerbook last night. Did a cold boot...and the Airport Express picked up the correct network DHCP info immediately. Roamed between a couple of WAPs, surfed a couple of sites, then sat down and tried to duplicate this feat...by re-booting at least 6 more times. Nada. I once again got factory default IP addresses on each attempted reboot. I changed nothing from the network settings I'd tried last week with this machine nor were any changes made to the network or WAPs. DHCP didn't work last week on several attempts (and reboots), worked ONCE yesterday on the first boot, then nothing again on the subsequent reboots.
    Again, I'm stressing that there don't "seem" to be problems with the network or WAPs because Windows clients consistently obtain DHCP and authenticate without issue.
    Does anyone have any ideas?

  • Gigantic problems with graphc card GeFore 8800GT under MacPro

    Hello
    I'm a user of MacPro 2 Quad-Core 3GHz computer with NVIDIA GeForce 8800 GT graphic card.
    This is my second card like this one becouse I can't find any other with low price for exchange and for good using OpenGL.
    Now I have gigantic problems with this card under Mac again, please help.
    It have extreme temperatures and graphic crashes when I use on any game or anything which harder use it. At real, my older card before burn out and go to trash after this. Now it comes again
    Is there any software to speedup windmill or any thing in my system what I can change for this? I have a plan to buy a cooler, but I need help in software before this.
    Why good quality company like Apple use this bugged cards in expensive computers, I can't understand this.
    Regards
    Dawid

    Nvidia had / has had / a run of problems - and Apple can choose Intel integrated, AMD.... or Nvidia basically. Though on PC side there are reference designs and then HIS (makes a really good ATI with its own design and cooper cooler), EVGA on Nvidia front.
    We don't get all that many options.
    Drivers always get a lot of "heat" and criticism.
    Was so glad to have X1900 as a choice, but not the $399 (or wait and $250 BTO) 5 yrs ago, and its history of problems. And recalls. Or ATI 2600XT. Can't win for losing sometimes.
    One reason I went and bought GTX 460 and run Windows on my Mac Pro today of all things. Other reasons too over the years. Locked into EFI graphic cards and you can have anything you want on the salad bar, as long as you want either shrimp or chicken.
    So heat up the oven, get out the egg timer, and have at it!

  • Problem with my card ..

    hi ,
    i have a problem with my card , that i use it before and its fine but now itunes tells me  " Your payment methon was decline "
    and there is no none Option to choose  .
    i cant download anything now , cuz the store need to edit my payment first !!
    Any idea ?!

    If the reason you can't initialize your PCI-MXI-2 is because you can't find vxiinit, the good news is that you probably are initializing your PCI-MXI-2 automatically.
    The functionality of vxiinit is now performed automatically by the driver when the system starts. This has actually been true for the last few versions starting several years ago. For a while, we continued to provide a version of vxiinit that didn't actually do anything, for compatibility with installations where legacy code required the existence of vxiinit; if you think something like that would still be useful, please describe your situation so we can consider it as a use case in future versions.
    If you are seeing some other error saying that you can't initialize your PCI-MXI-2, please reply
    to this answer with further details.
    -Scot (VXI Senior Software Engineer, National Instruments)

  • Problem with credit card verification with firefox 4 (works with safari!)

    I recently upgraded to Firefox 4 and tried to book train tickets online. I have done this many times before with earlier Firefox versions. Now however, after being redirected to the card verification page and submitting my security details, instead of confirming my booking Virgin trains asks me to log on again! I thought it was a problem with the website but I subsequently booked the tickets using Safari so I guess that means there is a problem with Firefox 4. Can I go back to the previous version?

    I, also, have previously made credit card purchases with Firefox version 3 without any problems.
    I only encountered this problem with credit card verification after downloading Firefox 4. I was however able to book tickets successfully, the same day, using Internet Explorer and the card verification went through as normal. I am confident that the problem was due to problems with the new version of Firefox.

  • Satellite A500-1GH problem with video card (I think...)

    Hello,
    I am having a problem with my A500-1GH. Randomly the monitor goes black and then recovers by showing a message "display driver stopped responding and has successfully recovered". My graphics card is the Nvidia GeForce 330. I read a lot, but all the opinions were old - from the beginning if the year, and no one seems to had solved this problem then. Do you know if now there is a solution for this?
    The laptop is brand new (respectively the windows is brand new) and the drivers and bios are up to date.
    Thank you in advance :)

    hi,
    Yeah, it is known problem with vga driver in this forum. As you already said yourself no one seems to had solved this problem :( I can just recommend you to try to install a vga driver from nvidia.com. In my case, i have nvida Gt 230 M, driver update solved it.

  • Problems with various professional soundcards and Satellite A100

    Hi All,
    I bought a Satellite A100 less than a year ago and have had problems with 2 different professional soundcards when using Cubase.
    - M-Audio firewire solo plugged into Texas Instruments PCMCIA card
    - Echo Indigo io (PCMCIA card)
    I'm running Windows XP and Cubase SE/SX3. When running Cubase, there are cracks, sound stops for a few milliseconds.
    I've never had any problems with my old Toshiba Satellite Pro A40 notebook. This is very disappointing and frustrating. I only use my new Toshiba for the Internet!!
    Could someone help?
    Cheers,
    Fred

    This info helped me to overcome the dreaded glitch last year.
    But I have lost wireless networking on my A100 which is very annoying :-S
    See below.
    But not to my knowledge has there been proper acknowledgement of this problem by Toshiba (please prove me wrong on this Toshiba right now!!!)
    see full locked thread here...
    http://forums.computers.toshiba-europe.com/forums/message.jspa?messageID=93292#93292
    Re: Audio Glitch Problem when playing/recording on Satellite A100
    Posted: 13-Aug-2007 18:13 in response to: music27
    Hi A,
    Sorry for not responding sooner.
    The way I changed the driver was -
    Open Device Manager
    Click the '+' at 'Computer'
    Right click on the 'ACPI Multiprocessor PC' entry and select 'Update Driver...'
    When the Device Driver Wizard comes up, select 'No, Not This Time' when it asks if 'Windows can connect to Windows update to search for software', then click Next
    On the next screen, select 'Install from a list or specific location (Advanced)' and click Next
    On the next screen, select 'Don't seach. I will choose the driver to install' and click Next
    Then you'll get a list of drivers, select MPS Multiprocessor PC (assuming your laptop is Dual Core) then Next
    After that, follow any other instructions - I can only give you a step by step guide this far otherwise I'll end up re-installing the driver on my working laptop (I was just working through it and noting down the steps). I'd back up any data you have beforehand aswell - I didn't lose anything when I did it but it's better to be safe.
    When I did this procedure, I had to reinstall a lot, if not all, of my drivers - most were picked up by Windows but the odd one or two needed the drivers from the Toshiba website, I can't remember exactly which ones but it wasn't too painful. Everything works fine now, including the Wireless connection.
    Hopefully this will work OK for your laptop - it's not the exact same model I have so you may get different results but all the best anyway!
    Cheers.

  • MOVED: Media Live : Problem with graphics card with vista Ultimate

    This topic has been moved to Vista problems.
    https://forum-en.msi.com/index.php?topic=112530.0

    Thank you for replying. I had no idea I had a response. It is a Windows 7 Home Premium. The game is actually now a few different ones for my child, Baby Luv, Brave & Disney Princesses. None of them will work. I have an Intel Graphics Media Accelerator 3150 graphics card in this (Compaq Presario All-In-One Desktop PC) and I just posted another question in the forum about wanting to know if I can replace the grahics card with a HD card and if so how? I have looked online but can't find an answer. Is it possible to replace the card or with it being an all-in-one is it not possible? Thank you.

  • Problem with Decklink card during voice over

    Hi,
    i have PMG5 2.5 GHz with FCS & Blackmagic Decklink extreme card.
    all these days i had a great time working on FCP . till i faced a peculiar problem
    when i am capturing video from Beta or DV 50 , i am able to select video Only or Audio only , or Video & Audio .
    but when iam trying to capture Audio Only option through the the Mic which is connected to the mixer, i am not able to capture audio.
    even i have noticed one more strange thing, i have tried Voice Over tool in FCP 5.04 with Decklinik card and i am not able to grab any audio through the Decklink card.
    but i can use built in audio for my voiceover.
    has anybody come across this kind of problem,
    can somebody help me .

    Hi Rajendra,
    your questions is marked as solved, but I haven't seen your question answered, so I might be wasting time. Anyway.
    I bumped into the same problem not long ago. I'm using a Multibridge, but the problem and solution are the same. Here's the reply I got from Kristian Lam over at Blackmagic:
    In order to get vo tool in Final Cut Pro HD to work, these are the
    steps to follow:
    1) Video Input in Blackmagic DeckLink preferences is set to match the audio input type. For example, if you're recording via the XLR connectors of your card, then then 'Inputs' under 'DeckLink Video Connections' must set to analog. It doesn't matter if it's component or composite analog video.
    2) In the View menu of Final Cut Pro HD, set External Video to “Off”. When finished with the Voice Over tool, set External Video to “All Frames” to use the broadcast monitor.
    3) You must have a stable video signal going into the card when using the vo tool or Final Cut Pro HD will not see the audio. (or use a Blackburst generator)
    4) Use the Displays menu to set the DeckLink desktop to the same format as the video source, eg. NTSC 720 x 486.
    Well, then select your Decklink Card in the Voiceover Input selection. Even after I had done all that, I couldn't see any audio coming into FCP. The solution to that was to raise the Trim at the top of the mixer. I got a nice signal into the Mackie and voilà also sound into FCP.
    Hope this helps,
    Colin

Maybe you are looking for

  • Messages in Inbox and Folders Deleted

    Hello there, I had this problem before with my N82 and I thought I resolved it. I have the messages saved on my memory card, a couple of month ago, every time I went to the inbox my phone froze and the folders were deleted. I was told to update the s

  • My arrow keys and backspace no longer works in Sql Developer

    In the work sheet of Sql Developer it is not allowing me to use my arrow keys or backspace key, I can use these keys in the result section but not in the worksheet section. When I use the arrow key it scrolls the page but the cursor stays in the same

  • Yahoo Videos not loading

    Yahoo suddenly this week keeps telling me that I need to download the Flash Player, yet I have had Flash Player on my computer forever.  I went ahead and removed it, and downloaded again.  Restarted computer and I still get the same message from Yaho

  • Which query is using which Hierarchy?

    Hello All, Where can i get the information like which query is using which hierarchy!? I tried to make it happen by combining lot of tables like RSRREPDIR RSZELTPROP RSZELTXREF RSHIEDIR RSZCOMPDIR but couldn't arrive at a solution. Did u guys come ac

  • JDeveloper and JPublisher

    I'm looking for some guidance on how JDeveloper and JPublisher work together. I'm attempting to use the Oracle Apps adapter to connect to E-Biz R12, and as part of that JDeveloper has an adapter service creation wizard which uses JPublisher to create