Problems with graphics after Boot Camp upgrade (from 3.1 to 3.2)

Right, today I upgraded Boot Camp (the first time I used iTunes on Windows so thats way I never did the upgrade before) from 3.1 to 3.2 and after the installation my screen went blank/black. After restarting iMac it the screen appeared but in 1024x768 resolution and without working graphic drivers.
I tried many different options to update the ATI HD 4850 driver, but none of them worked. It always says that there is some problem with it, but it also is up to date every time I try to update it manually for the drivers which comes with 10.12 Catalyst.
I spend several hours trying to solve it, but I just can't and I really don't know what to do next.

Right, I managed to fix it by updating the software manually, but selecting to choose from the list and I had to install the mobility drivers.

Similar Messages

I have problems with activation, after delete mi Iphone from Icloud.

I have problems with activation, after delete mi Iphone from Icloud.

Hello Sikiz 21,
Thanks for using Apple Support Communities.
For more information on this, take a look at:
iPhone: Troubleshooting activation issues
http://support.apple.com/kb/TS3424
iOS: Troubleshooting FaceTime and iMessage activation
http://support.apple.com/kb/TS4268
Best of luck,
Mario

Problems with bluetooth in Boot Camp

I recently installed windows xp with bootcamp on my macbook and the bluetooth is acting weird while in windows. It will pair with my devices (Phone: Samsung D-407, Headset: Plantronics Explorer 220) but in the bluetooth connections window it will only show them as connected for a second or two and my devices won't work. I did install Service Pack 3 for windows and I don't know if that affected it or not because I didn't try the bluetooth before updating. Would that cause any problems or is it something else?

Ric - wrote:
I'm having problems with my MacBook Pro's bluetooth support in Vista under Boot Camp so I thought I'd try to re-install the Boot Camp 2.1 drivers. However, whenever I run the setup program, it just gives me a useless error message saying it encountered an error before it could start the install, and to please try again later. Rebooting doesn't help.
So I thought maybe I could uninstall all the Apple stuff then start again. But when I try to uninstall "Boot Camp services" from the programs and features control panel, it starts to uninstall, but then gives up silently as it nears the completion of the "gathering information" dialog.
So I can't uninstall or re-install this thing. Anyone know how I can fix this?
Thanks!
It may be too late, but have you tried going into the drivers using Vista's control panel and either removing the drivers or reverting to precious drivers?

Windows 7 Black screen with cursor after boot camp partition

So I realise this is a problem that was plaguing people a few years back. So I'll go from the very start.
I've downloaded a copy of windows 7 professional 64bit from the Microsoft website. My optical/CD drive isn't working, so I've been unable to use it
to install windows. I decided I'd try booting from my USB. So I have the ISO file and formatted my USB and I've downloaded the latest drivers for boot camp assistant on my mac (version 5.0.4) I'm up to date with every update for my mac. Now, I do realise that Apple doesn't recommend using a USB to load windows, but I watched this http://www.youtube.com/watch?v=8z1gqw0ougo and it explained how to get the checkbox up when you're in boot camp so you can run from your USB.
My problem now, is that straight after I have partitioned my hard drive, it goes on to install windows but upon restarting it reaches "the black screen of death" with just the white cursor blinking. I've tried multiple times and keep getting the same result. I've even tried what Apple suggested and only have one USB device plugged in http://support.apple.com/kb/TS4536
The details for my mac are as follows:
Model Name:
iMac
Model Identifier:
iMac10,1
Processor Name:
Intel Core 2 Duo
Processor Speed:
3.06 GHz
Number of Processors:
1
Total Number of Cores:
2
L2 Cache:
3 MB
Memory:
4 GB
Bus Speed:
1.07 GHz
Boot ROM Version:
IM101.00CC.B00
SMC Version (system):
1.53f13
Serial Number (system):
W800992A5PE
Hardware UUID:
A108E54E-3C53-5AF8-BFDF-2CF7ED567A74
and it's a late 2009 model.

I have solved this issue now but seem to have encountered another one. I solved the above issue simply by keep on trying time and time again, partitioning the hard drive and trying to install windows 7.
Anyway, I have encountered this error: windows setup could not apply the configuration set. The WINDOWS folder cannot be found.
Please help!

USB problems with XP and Boot Camp

XP Professional loads on my iMac using Boot Camp without any problem. The trouble appears to be associated with any USB device. I currently have an Apple keyboard, plain Microsoft Mouse and Altec Lansing headphone/speaker plugged in to the iMac (not to a hub). Problems, which seem to strike without warning, include freezing and strange graphics behaviour, invariably accompanied with several "bong"-like noises which my friends who are familiar with Windows tell me is a sound associated with USB devices. The incidents last for between five and sixty seconds on average. I have the most up-to-date drivers installed.
Can anybody suggest a possible cure?

It now looks increasingly as though the problem is associated with the keyboard, which is the basic white plastic keyboard provided with the iMac. Still haven't found a cure, though.

Registration requests and other problems with LE 8.0.2 upgrade from 7.2.3

Great upgrade. Improved sound, look and features, but:
1. When I switch between Logic Express 7 and 8, I'm forced to register each version again & again.
2. If LE 8 is left open when I put my computer to sleep, it won't recognize an iControl at wake up. After deleting the device from the surface controller set-up, rescanning it & resetting midi drivers, the play button won't work. It took until OS X 10.4.9 for Apple to get the iControl to work in LE 7.2.
3. The instrument plug-in window doesn't come up after selecting a software instrument even with the box checked in preferences.
3. If you've used a lot of preset voices in LE 7, the upgrade will require a lot of reprogramming. Tones like Jangly Jack are gone completely. Some missing LE 7 voices like the Ubiquitous DX can be imported into version 8 and saved as a channel strip setting. Logic 8 & GarageBand 3 lack a good DX7.
4. The word Strings is misspelled in the channel strip setting window.
5. Some LE 7 keyboard commands are no longer available in LE 8. For example, at certain times, you could move around an environment window in LE 7 with shift-plus and shift-minus keys. There was no way to program that in LE 7 either.

Hi Robby
I don't know if you solved your 'register now' problem concerning LE7 & LE8. I suspect the error your making is trying to open up each project in it's initial program - i.e. 7 or 8. The computer sees it differently (concerning Library settings etc) and your problem will be solved (hopefully) if you open up things in the right order :
1° Open Logic EX 8.
2° Then open the old project from LE 7. This should then open in your new system of LE8.
Of course if you wish to keep working on LE7 projects in LE7 then you'll have to change between each system as you go. You should remember that in terms of programs (with the same 'name/directory') that a computer works much like a tightly packed garage - if you wish to get out your old bike you'll have to move the new one first and vice versa!!
Normally you won't be asked to register again, BUT ... remember that you have to decide if you're going to save in 8 (and so keep working in that format) or not and I imagine if you've bought an update this is certainly your idea. Of course if you now decide to close LE8 and then start clicking on files in LE7 you'll be back at square one ..... register now etc. Please also remember that LE7 projects can work in LE8 but not the other way round, so once you've opened a LE7 project and made adjustments using LE8 you can't reuse 7 - I suggest you back up all your LE7 first on external/DVD support for later/backwards adjustments or reference.
Another small point to remember is that your computer will now be saving your project a second time in a LE8 format. So at some point you should remember that you'll be using valuable HD space twice over if you just convert and save in the new format - if you see what I mean?!

Problems with GNOME After The Last Upgrade

I have too many problems these days with my Arch box.. And I don't know when or how these problems are solved but I'm really bored about having problem all the time. I don't know all of these are bugs but if they're I'm ready to enter some bug reports.
1) After the last update, Metacity doesn't start automatically. So everytime, I don't have my mouse theme, my thema of borders of the windows, the notes I took with gnome's note applet doesn't disappear.
2) gnome-power-manager is never the same that I used to.. I just found that killing and rerunning it is at least make it work. But it's menus and options is not rich as I was earlier times. It doesn't say that much as it did in the earlier times.

I've same problem with gnome-power-manager, it works only when i kill it with killall gnome-power-monitor and re-run it.
About metacity i don't have problem with it.

Problems with masks after sending sequence back from SpeedGrade to Premiere (CC)

Hello,
I'm colour grading a clip in SpeedGrade CC using the new direct link function. For the colour grading I used different layers and also masks. Once I'm done I sent my sequence back to Premiere Pro CC.
I see, Premiere shows me exactly the colour correction I did in SpeedGrade except of one thing:
The places where I used masks in SpeedGrade to light them for instance a bit up are now full of pixeled lines...
I thought it's just a problem with the Preview, so I exported it. The pixeled lines stayed.
Again: In SpeedGrade is everything fine, but when I'm sending the sequence back to Premiere there are these pixels.
It's really irritating because one day before it worked very good without any problems and I was practically doing the same as now.
Please help me, if you can! Thank You!

Thank you but my masks are not animated. Premiere just can't reflect the colour correction I did for these masks. Here's an example...on the right edge I created a mask in SpeedGrade. And that's what Premiere is showing me when I send the sequence back from SpeedGrade to it:
Does anybody know the solution?

Problems with storage after failure of restore from TM back up.

Okay, so I've become so frustrated over this that I've decided to see what is the issue. After a horrible incident where I inadvertedly removed the OS start up disk (I unsuccessfully installed Windows 8 without the proper drivers...long story really), etc I was forced to restore my hard drive back to stock through the Genius bar. They recommended that I restore my files with using "Users" from Time Machine because I had backed up everything. Unfortunately, the two times I've tried to restore from backup, it would always stop at 52% (I had about ~250gb to restore) so I just stopped trying and if I needed any files, I would manually transfer them. Anyway, my issue is that I just recently noticed (a month after trying to restore) that I have about ~200gb in my "other" category. In theory, that shouldn't be the case because there is barely anything on my computer. Barely. I've looked at so many websites and so far, no idea... Any ideas? Should I just wipe my hard drive clean again?...because this is getting ridiculous. Thanks in advance.

First, empty the Trash if you haven't already done so.
To locate large files, you can use Spotlight. That method may not find large folders that contain a lot of small files.
You can more effectively use a tool such as OmniDiskSweeper (ODS) to explore your volume and find out what's taking up the space. You can also delete files with it, but don't do that unless you're sure that you know what you're deleting and that all data is safely backed up. That means you have multiple backups, not just one.
Proceed further only if the problem isn't solved by the above steps.
ODS can't see the whole filesystem when you run it just by double-clicking; it only sees files that you have permission to read. To see everything, you have to run it as root.
Back up all data now.
Install ODS in the Applications folder as usual. Quit it if it's running.
Triple-click the line of text below to select it, then copy the selected text to the Clipboard (command-C):sudo /Applications/OmniDiskSweeper.app/Contents/MacOS/OmniDiskSweeper
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window (command-V). You'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning not to screw up. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
The application window will open, eventually showing all files in all folders. It may take some minutes for ODS to list all the files.
I don't recommend that you make a habit of doing this. Don't delete anything while running ODS as root. If something needs to be deleted, make sure you know what it is and how it got there, and then delete it by other, safer, means. When in doubt, leave it alone or ask for guidance.
When you're done with ODS, quit it and also quit Terminal.

Problem with graphic after recovery

Hi.
I've this problem: i made a recovery of my HP Pavilion DV6 6178sl (ATI RADEON 6770M) with the program called HP Recovery Manager. After this recovery i'm not able anymore to play any game that i played before, and with high performances. I tried to download the last drivers for my graphic card, but nothing changed. Can you help me?

Hello @Marcotv7 ,
Welcome to the HP Forums!
I see y9ou're having issues with your graphics card after performing a system recovery.
You've stated you cannot play games but also stated you can use high performance. Are you saying that you cannot play games at high performance or that you cannot play the games at all or use the high performance setting in the Catalyst Control Center?
I would suggest starting with installing the following driver for your GPUs (the package also includes the Intel HD driver): AMD High-Definition Graphics Driver.
It would be great if you could provide a little more detail on the issue syou're experiencing. It's always better to have extra and not need it than need it and not have it.
Please click the "Kudos, Thumbs Up" at the bottom of this post if you want to say "Thanks" for helping!
Please click "Accept as Solution" if you feel my post solved your issue, it will help others find the solution.
The Great Deku Tree
I work on behalf of HP.

Problem with airport after snow leopard upgrade.

I know there are several threads about this already but none of the "answers" to those threads fix my problem. I just upgraded snow leopard and installed the new update. Since then I can connect to my wifi, but nothing will load. My airport says that I am connected and that I have a full signal, but whenever I open my internet browser (firefox, safari), nothing will load, it just stays on the screen that says "loading" at the top. I've tried deleting the "Automatic" airport option and creating my own but that has not worked. Any suggestions as to how to fix this?? Right now the only way i can access the internet is be plugging directly into the router.

Hi swftrules,
It's probably worth trying just to ensure that the issue is (or isn't) location specific. Preferably to go somewhere that you've never connected before and has free WiFi without crazy encryption. An Apple Store is a great location to try.
If it does work at the new location, I'd be inclined to reset the router and set it back up (open network) and see if that works and then add encryption from there.
If it doesn't work at the new location, then I'd consider reloading the OS if you've already tried the new network location.

Central storage Problems with iTunes after 10.5 upgrade

I keep my I tunes Library on a Central 2TB network storage device connected to my Router. After installing 10.5, i have been experiencing trouble, every tim I need to re boot my MAC for a software update, ITunes has to "organize" the same Library again. It takes about 5 to 6 hours
any [roposed fixes?
J

OK ... It seems by exiting LR and re-launching it, the problem goes away. I blame Apple for this one, clearly.

Problems with apps after 3.1 upgrade

After upgrading to 3.1 none of my downloaded apps will work on my phone. What's up with that?

Try backing up your phone, restore it, then sync your apps back to the phone.

Problem with Java after System Upgrade to 10.5.7

Hi,
I am facing problem with Java after having run Software upgrades.
Here is the whole story. I recently moved to iMac 10.5.6 from PowerPc 10.4. On this new machine I was having problem running a 3rd party application, which requires JVM. As this application worked well on Tiger, I decided to upgrade JVM on my iMAC using Software Upgrade(was I insane!!). As I like my systems to be updated (as with linux on my personal machine) I clicked "install all". As a result I have the following upgrades run on my machine:
2009-05-20 13:12:01 +0200: Installed "Mac OS X Update Combined" (10.5.7)
2009-05-20 13:12:10 +0200: Installed "Remote Desktop Client Update" (3.2.2)
2009-05-20 13:12:26 +0200: Installed "Java For Mac OS X 10.5 Update 2" (1.0)
2009-05-20 13:58:36 +0200: Installed "Java for Mac OS X 10.5 Update 3" (1.0)
2009-05-20 13:58:44 +0200: Installed "AirPort Utility Software Update 2009-001" (5.4.1)
2009-05-20 13:59:07 +0200: Installed "QuickTime" (7.6)
2009-05-20 13:59:22 +0200: Installed "iPhoto Update" (7.1.5)
2009-05-20 13:59:28 +0200: Installed "iLife Support" (9.0.2)
2009-05-20 13:59:38 +0200: Installed "iDVD Update" (7.0.3)
2009-05-20 13:59:58 +0200: Installed "iTunes" (8.1.1)
But now, simply running $ java on the prompt hangs, i.e. it takes no action.
$ which java
/usr/bin/java
$ ls -ltr /usr/bin/java
May 20 15:09 /usr/bin/java -> /System/Library/Frameworks/JavaVM.framework/Versions/Current/Commands/java
$java (no response)
Here is the output of $ top
PID COMMAND %CPU TIME #TH #PRTS #MREGS RPRVT RSHRD RSIZE VSIZE
703 java 98.8% 0:38.54 3 110 72 480K 184K 1964K 40M
Any clues?
cheers

Hi man,
In the wake of this java problem I resorted to keep working on my old machine, and today in my spare time I tried to fix this new machine.
So I execute $java on prompt, and then try to check the files it has opened, using lsof -p pid
I see it referring to
/System/Library/Frameworks/JavaVM.framework/Versions/1.5.0/Home/bin/java
isn't this usually the JAVA_HOME
However, executing $/System/Library/Frameworks/JavaVM.framework/Versions/1.5.0/Home/bin/java
hangs!!
but
$/System/Library/Frameworks/JavaVM.framework/Versions/1.6.0/Home/bin/java
works!!
$ pwd
/System/Library/Frameworks/JavaVM.framework/Versions/1.6/Home/bin
$ ./java -version
java version "1.6.0_07"
Java(TM) SE Runtime Environment (build 1.6.0_07-b06-153)
Java HotSpot(TM) 64-Bit Server VM (build 1.6.0_07-b06-57, mixed mode)
So, I changed the links as follows
borgraf:Versions raveesh$ l
total 72
drwxr-xr-x 3 root wheel 102 Mar 6 2008 1.3.1
lrwxr-xr-x 1 root wheel 3 May 21 19:42 1.4.1 -> 1.4
drwxr-xr-x 8 root wheel 272 May 21 19:42 1.6.0
lrwxr-xr-x 1 root wheel 3 May 21 19:44 OldCurrentJDK -> 1.5
lrwxr-xr-x 1 root wheel 5 May 21 19:44 1.4 -> 1.4.2
lrwxr-xr-x 1 root wheel 5 May 21 19:44 1.3 -> 1.3.1
lrwxr-xr-x 1 root wheel 5 May 21 19:44 1.5 -> 1.5.0
drwxr-xr-x 8 root wheel 272 May 21 19:44 1.4.2
drwxr-xr-x 8 root wheel 272 May 21 19:44 1.5.0
lrwxr-xr-x 1 root wheel 5 May 21 19:44 1.6 -> 1.6.0
lrwxr-xr-x 1 root wheel 1 May 21 19:44 OldCurrent -> A
drwxr-xr-x 8 root wheel 272 May 21 19:44 A
lrwxr-xr-x 1 root wheel 3 Jun 4 17:14 CurrentJDK -> 1.6
lrwxr-xr-x 1 root wheel 3 Jun 4 17:21 Current -> 1.6
Linking my Current and CurrentJDK to 1.6 and it works!
However, shall that be the reason!
what is in your /Versions/Current/
I got the following
$ ls /System/Library/Frameworks/JavaVM.framework/Versions/Current
CodeResources Frameworks JavaVM
Commands Headers Resources
There is no /Home in here, which is usually the case for /1.5 or /1.6
Anyways, things seems to work for the moment. Lets see if I get problem with using Java.
thanks

I am having problems with mail after upgrading to mountain lion. Is there a way to go back to lion?

I am having problems with mail after upgrading to mountain lion. Is there a way to go back to lion?

It would always be easier to fix the Mail problems.

Problems with graphics after Boot Camp upgrade (from 3.1 to 3.2)

Similar Messages

Maybe you are looking for