Problems with graphics drivers

Hello, I tried to install new drivers to my Ati 6770m (2gb) and there is a problem with almost every driver. For example the newest ati catalyst 14.5 beta.  When the driver is installed, I can't switch to the resolution higher than 1024x768. Ati catalyst control centre is not installed or I there is an error message saying, that the driver is not installed correctly so the control centre can't open. Sometimes the system crashes to the blue screen and I have to reboot. I see this problem with various drivers. The only driver, that is working for me is Ati Catalyst 13.10 mobility beta. And with this driver there's a lot of graphic problems with GTA V. I see squares on all objects in distance when dx11 and AA is turned on. It is unplayable with this driver. Please help.   

Hey @Tommy2220 ,
Thanks for the additional information. If you uninstall all that you have in the graphic drivers section of the Device manager, including the drivers that are present. Restart the Notebook, and download from here. You will only need AMD/Intel Switchable High-Definition (HD) Graphics Driver, it includes everything you will need.
You can also find them , here is a link to the HP Support Assistant if you need it. Just download and run the application and it will help with the software and drivers on your system.
Hope this helps you out.
Thanks.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

Similar Messages

  • Notebook NC6400 HSTNN-C18C problem with grafic drivers

    hello i have
    NC6400 HSTNN-C18C and i have problem with graphic drivers.i have windows 7 proffesional i found some .but in install has failed installation .i have installed game Farming simulator 15 but i still must install latest graphic drivers.can you send me link where i download drivers thanks for help

    Hi,
    It's a good machine isn't it. Unfortunately no official support:
      http://h20564.www2.hp.com/hpsc/swd/public/readIndex?sp4ts.oid=1848274
    Please try:
       http://h30434.www3.hp.com/t5/Notebook-Operating-Systems-and-Software/compaq-nc6400-drivers-for-windo...
    Vista driver on the first link may help.
    Good luck.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • Indesign CS5 crash during startup - problem with Graphics.rpln

    I work in an architectural company and already several of our computers have experienced this very rare and unusual behaviour. During start up of Indesign (not clicking on any file but just launching Indesign) it crashes with the following error:
    "Adobe Indesign CS5 has stopped working"
    We use Windows 7 64bit, so the first step I did - I went into Application Log which says, so appears to be a problem with Graphics.rpln.
    -=-=-=-=-=-=-=-=-=-=-===-=-
    Fault bucket 1848500921, type 1
    Event Name: APPCRASH
    Response: Not available
    Cab Id: 0
    Problem signature:
    P1: InDesign.exe
    P2: 7.0.0.355
    P3: 4bad00be
    P4: GRAPHICS.RPLN
    P5: 7.0.0.355
    P6: 4bad03d3
    P7: c0000005
    P8: 0004e1e2
    P9:
    P10:
    Attached files:
    C:\Users\User\AppData\Local\Temp\WER162E.tmp.WERInternalMetadata.xml
    These files may be available here:
    C:\Users\User\AppData\Local\Microsoft\Windows\WER\ReportArchive\AppCrash_InDesign.exe_b042 ec9a818cb8fb57eefe0aacb41c22fdcbb8_10c12aa8
    Analysis symbol:
    Rechecking for solution: 0
    Report Id: 9e59fc2c-5b68-11e3-908c-f46d0497fc9b
    Report Status: 0
    -=-=-=-=-=-=-=-=-=-=-===-=-
    I have tried everything I could think of - removed and reinstalled Adobe CS5, manually removed Adobe folders under %Appdata%\Local and %Appdata%\Remote folders (why can't Adobe delete those things during uninstallation is always a total mystery), changed video adapter drivers, cleaned Temp folders, everything I knew...
    None of the other apps like Photoshop or Illustrator CS5 malfunction - only Indesign. What is going on?
    Can it conflict with other software we use? We have Bentley Microstation, 3D Max, Office 2010, Kaspersky Antivirus and LOGMEIN installed on this computer...Any clues, guys?

    Looks to me like you've never installed any of the patches. Last patch for CS5 was 7.0.4, so I'd start with that and see if ti helps.

  • Problems with ATI drivers and gnome3?

    I've tried to install gnome3 off of the gnome-unstable repo (sudo pacman -S gnome-unstable/gnome gnome-unstable/gdm I'm assuming that's the proper command). However, when GDM starts, my screen just flashes a cursor, goes blank, turns off, and repeats. Is there a problem with ATI drivers or is the package just not working at all right now?

    I'm also having troubles with Catalyst and gnome3 (I'm ussually in i3 btw) just playing with it tho. Seems to detect my graphics as 'VESA: JUNIPER" which probably means it's using some sort of fallback, eitherway it's not very functional and messes with my X server a bit
    EDIT: I can get into gnome, but there's a lot of flickering doing anything, should proabaly check for bugs on their tracker
    EDIT2: https://bbs.archlinux.org/viewtopic.php … 89#p913189 <--- looks like that might be gaining some traction, something to watch
    EDIT3: This bug and This Bug might be relevent, not too recent tho
    And another one
    so yeah..... ATI
    Last edited by jmad980 (2011-04-07 07:37:21)

  • E7-00 Problem with MTP drivers winXP service pack ...

    I have E7-00 and i have a problem with MTP drivers not being installed and constatly showing device is not working properly in device manager.
    I have win XP sp3,  installed newest Nokia Ovi suite, and my computer is constatly trying to install MTP device drivers, and keeps complaining it cannot.
    What should i do.
    Cheers
    Aleksandar

    NOKIA IS NOT LISTENING TO THIS FAILURE, WHY DO WE HAVE THIS FORUM AT ALL WHEN NOBODY HELPS TO SOLVE THIS BUG

  • Downgrade to win7 problem with audio drivers. beats audio software for win7?

    I recently purchased the HP Envy 700-074 from best buy.  it was necessary to downgrade to windows 7 for some work software and I would like proper audio drivers/software for windows 7. Right now it seems to be detecting as Nvidia audio driver but in this case it doesnt allow my front panel audio ports to output audio. I would also like to have beats working. 
    here are the hardware ID's associated with the card
    HDAUDIO\FUNC_01&VEN_10DE&DEV_001C&SUBSYS_38423619&REV_1001
    HDAUDIO\FUNC_01&VEN_10DE&DEV_001C&SUBSYS_38423619
    and here's a quick screenshot of the driver that is associating with it right now.. 
    http://gyazo.com/23499c19d5e2a21f81b9124ad822c07d.png
    even those VEN_10DE's seem to associate to nvidia, but from HP the driver is meant to be IDT high definition audio? is something going on here? 
    the only change i've made to the computer is upgraded to an EVGA Nvidia GT 610 video card.,

    Hi, Paul.
    I have similar problem here.
    I bought HP Envy 810-200nr and I hate W8, so I installed Windows Server 2008 R2, which is my favourite.
    Then I solved numerous problems with chipset drivers and finally it all works, but Audio (IDT HD Audio) does not work.
    Completely silent.
    HDAUDIO\FUNC_01&VEN_111D&DEV_76C7&SUBSYS_103C2AF3&REV_1001
    HDAUDIO\FUNC_01&VEN_111D&DEV_76C7&SUBSYS_103C2AF3
    It looks okay, when playing audio - indicator blinks and shows level, volume can be adjusted, all parametrers - speakers, etc seems okay but silent!
    I tried numerous drivers for W8 and W7 64 but they give "Incompatible version" error.
    Can you advise me what to do? I really want WS2008R2 here, but this audio is weird..

  • [svn] 3216: Fix for MXMLG-228, a visibility problem with graphic elements.

    Revision: 3216
    Author: [email protected]
    Date: 2008-09-15 18:13:11 -0700 (Mon, 15 Sep 2008)
    Log Message:
    Fix for MXMLG-228, a visibility problem with graphic elements. This is a quick fix that may force extra display objects when toggling visibility. We should investigate alternate solutions if performance is a problem.
    Bugs: MXMLG-228
    Reviewer: Deepa
    QA: Please check for performance problems when toggling visibility of a large number of graphic elements.
    Ticket Links:
    http://bugs.adobe.com/jira/browse/MXMLG-228
    http://bugs.adobe.com/jira/browse/MXMLG-228
    Modified Paths:
    flex/sdk/trunk/frameworks/projects/flex4/src/flex/graphics/graphicsClasses/GraphicElement .as

    Hello Antonio;
    After many, many test I discovered that the problem, at least in my case it is caused by the new ACR 4.5. Please read the Thread that I post under Camera Raw. I include the link below.
    I also open two Bug Reports about this, but as usual Adobe (and other Software Companies) will never take responsability for this, until one day they release a new version with "enhancements".
    PSE6 Organizer Crash with ACR 4.5 (Vista Only?)
    http://www.adobeforums.com/webx/.3bb6a869.59b60d3e

  • Problems with graphics on MacBook Pro / Проблемы с графикой на MacBook Pro

    After updating to 10.7.3 are having problems with graphics (screenshot attached).
    Installing the Combo update did not solve the problem!
    Updating to 10.7.4 did not solve the problem.
    What should be done that would solve the problem?
    /Russian
    После обновления на 10.7.3 возникли проблемы с графикой (скриншот прилагается).
    Установка Combo обновления проблему не решила.
    Обновление до 10.7.4 проблему не решило.
    Что необходимо сделать что бы решить проблему?

    Overheating happens when I use heavy graphics applications. At the moment, MBP cold, but the problem occurred. But if the application is rolled up and open again, the artifacts disappear. The problem occurs 3 ... 5 times a day, which is very annoying. In 10.7.2 before updating to 10.7.3 had no problems.
    MBP 13" (mid 2010)
    /russian
    Перегрев бывает, когда я использую тяжелые графические приложения. В данный момент MBP холодный, но проблема произошла. Но если приложение свернуть и открыть снова, артефакты исчезают. Проблема возникает 3...5 раз в день, что сильно раздражает. В 10.7.2 до обновления до 10.7.3 проблем не было.

  • Problems with graphics [link removed]

    Hi everyone.
    I have problems with graphics [link removed] - Ogłoszenia Hrubieszów. Darmowe ogłoszenia Hrubieszów i okolice. If you want to help, please [link removed] help me in diagnosis. THX !

    Explain what exactly the problem is rather than spamming the forum with links. The page looks just fine in Firefox and Chrome.
    Mylenium

  • Problems with Vista Drivers on Satellite M100 (PSMA1E)

    Hello,
    I got Problems with installing the Vista Driver for the Graphic Card and the Realtek Sound Card.
    I downloaded the Drivers from the Toshiba-Support Side! The Realtek Driver couldnt be installed because of some missing file! The CCC wouldnt run correct after installation! I got Vista Buisness!
    Greets, kalest

    I fixed the Sound Problem for myself:
    The Realtek Site offers drivers for the HD-Soundchip. I installed them and now i got HD Support on Vista!
    The Problem with the Cata.Control Center still exists!
    Greets, kalest

  • Lenovo S205 & Windows 7 64bit. Problems with graphics, please help

    Hi, 
    I recently bought a Lenovo s205:
    AMD E-350
    It came with 1GB but I upgraded it to 4Gb RAM (1333 running at 1066)
    Windows 7 64 Ultimate.
    I have tried also Windows 7 32 (Professional, ultimate) and all versions give me the same problem, I will explain here:
    I have tried in AHCI mode and IDE mode from the bios and done fresh installs of Windows. Still the same.
    After installing all the drivers, I get randomly in different programs "black" or sometimes "white" menus. Whenever I set the cursor on the menu (White or black part), the letters start showing up.
    On Firefox for example, it happened where you write the address (Ex: www..) And when searching images too.
    I have tried the original drivers that the Lenovo's website has for the S205 and the latest from Ati/AMD and nothing solves the problem.
    What can this be? Faulty ram? Faulty OS? Problem with the graphic card drivers?
    Please help, it is so frustrating. 
    Thank you so much. 

    Thank you very much for your help. 
    I will try capturing some screenshots if that helps.
    I can discard the problem with the ram at the moment. I have tried a new set of ram (two 2gb modules = 4gb in total). The problem persists, even when they are tried individually. I also tried the original ram module the Lenovo came with (1module of 1gb), alone. Problem persists too.
    However, I do not have a problem trying the VGA output. Will this help too? As I do not have any screen with HDMI at the moment. 
    What I will do too, is to try a Windows 7 from another disc, a Home version 32 bit. I hope this can get the problem fixed.
    The main issue is that I bought this computer from Germany (From a store on eBay) and came with DOS. I will have to return it to the seller, I assume, if the rest fails to show any improvements.
    Thank you for your reply and any more suggestions are welcome.

  • Satellite P100-387: Problems with graphics mode swithing on new nVidia

    *Looking for help!*
    _I have recently installed nVidia drivers from toshiba site (84.00) and since than my system has severe problems with changing graphical modes when starting applications in pre-determined mode (such as 800x600)._
    This problem affects my son mostly, as all older games are trying to run in 'Full screen mode' that fails to initialise properly.
    Also I have noticed that in dxdiag the option about DirecrDraw settings shows that it is completely not supported by my graphic card acceleration.
    Any ideas on how to resolve the problem desperately needed.
    Relevant nformation:
    Graphic card - nVidia GeForce GO 7600 driver: 6.14.0010.8400
    System Memory - 3MB
    O/S - Win XP Professional 5.1 build 2600
    ?:|

    Have you installed the latest BIOS?
    You could try reverting back to the original driver, it should be in C:\TOSAPINS. Or just Rollback the driver in Device Manager. Or revert back to a previous System Restore Point.

  • Troubles with graphic drivers installation

    Hi! I need some help with installation of graphic drivers on pavillion g7-1078sr, win7-x86. After installation of Intel turbo boost technology driver (sp55027, downloaded from here) in device manager, in videoadapters i still see Standart VGA Graphic Adapter(VEN_8086&DEV_0046 = core i3 integrated video) instead of Intel HD. Why drivers are not installed?
    And second trouble. Installation of ati graphic driver(sp55025) says that's all is OK, but i can't launch control center and i can't see my graphic card in device list, i see only standart adapters. (.net Framework 4.0 installed)  Here is the screenshot of trouble http://s011.radikal.ru/i317/1206/e3/0de594a696ab.png
    Help me please, cause i can't use my notebook normally. This is abnormal situation with the drivers.
    This question was solved.
    View Solution.

    Hi,
    Try downloading and installing the following drivers.
    First, open windows Control Panel, open Programs and Features, right click the Intel Turbo Boost Technology driver and select Uninstall - when this has completed, restart the notebook.
    Next, download and reinstall the Chipset driver on the following link.
    Chipset Driver.
    After this installation has completed, restart the notebook.
    When windows has reloaded, download and install the driver on the link below.
    ATI/Intel Installer.
    Again, when this installation has completed, restart the notebook again and check.
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • G62-b45em problem with graphic card

    First of all, my english is not so good, sorry about that.
    I'm using Windows 8.
    I have a problem with my graphic card, it just wont start. I mean the ATI Radeon, you can see here witch exactly.
    I downloaded the driver from this page, but I think it wont match. 
    Here is also a screenshot with the error that i found in Device Manager. If you need more information that i can provide to you just tell me.
    This question was solved.
    View Solution.

    Hello Nocar.  I understand you're having some trouble getting your video driver to work properly in Windows 8.
    This error means that the device cannot start due to not having the proper driver.  I searched and there does not seem to be an official driver for this hardware.  However, a lot of users have reported success with installing the Windows 7 drivers in compatibility mode.  You should take a look at this thread which a colleague of mine posted.  It covers a possible fix for getting switchable graphics to work in Windows 8. 
    I hope the thread is helpful.  Let me know the result.  
    Have a great afternoon!
    Please click the white star under my name to give me Kudos as a way to say "Thanks!"
    Click the "Accept as Solution" button if I resolve your issue.

  • Problems with graphics after Boot Camp upgrade (from 3.1 to 3.2)

    Right, today I upgraded Boot Camp (the first time I used iTunes on Windows so thats way I never did the upgrade before) from 3.1 to 3.2 and after the installation my screen went blank/black. After restarting iMac it the screen appeared but in 1024x768 resolution and without working graphic drivers.
    I tried many different options to update the ATI HD 4850 driver, but none of them worked. It always says that there is some problem with it, but it also is up to date every time I try to update it manually for the drivers which comes with 10.12 Catalyst.
    I spend several hours trying to solve it, but I just can't and I really don't know what to do next.

    Right, I managed to fix it by updating the software manually, but selecting to choose from the list and I had to install the mobility drivers.

Maybe you are looking for