Problems with graphics [link removed]

Hi everyone.
I have problems with graphics [link removed] - Ogłoszenia Hrubieszów. Darmowe ogłoszenia Hrubieszów i okolice. If you want to help, please [link removed] help me in diagnosis. THX !

Explain what exactly the problem is rather than spamming the forum with links. The page looks just fine in Firefox and Chrome.
Mylenium

Similar Messages

Problems with Dinamic Link between Premiere pro CC and After Effects CC

I'm having serious problems with dinamic link between premiere pro and after effects, really serious problems that have 2 big projects in trouble (a documentary and a video clip) and I had to redo all the work pipeline to the consumer.
The documentary for a spanish TV was made on CC 2014 and a video clip was made on CC. Both of them with a lot of after effects composition in the premiere pro timeline. Render freeze, a lot of playback issues, and many more problems... Until I decided to remove these links between premiere and after effects and render out all the after effects compositions one by one and insert as clips in premiere pro. 1 week working away with back and fourth.
I've got a huge workstation:
i7 4990
32Gb ram
GTX780 3gb
256 gb system ssd
2 Tb project storage
*All my hardware and software are update.
I know that a lot of folks are on the same huge problem and I want to ask everyone:
How do you save this?
What is your pipeline?
Are there any solution?
Best practice to use dinamic link in a huge project?
Thanks,
Ruben Gimenez.
R&D iceblink.es
www.rambot.es

Thank You, Jim -
Unfortunately that specifically did not work.
Based on another comment sent to me, here is what did.
In PProCC
File > Adobe Dynamic Link > New After Effects Composition
In AECC
From that composition created from PPro, I imported the project (aep) initially created in AECC from another team member. Saved the file.
Back in PProCC
File > Adobe Dynamic Link > Import After Effects Composition
Magic.

Indesign CS5 crash during startup - problem with Graphics.rpln

I work in an architectural company and already several of our computers have experienced this very rare and unusual behaviour. During start up of Indesign (not clicking on any file but just launching Indesign) it crashes with the following error:
"Adobe Indesign CS5 has stopped working"
We use Windows 7 64bit, so the first step I did - I went into Application Log which says, so appears to be a problem with Graphics.rpln.
-=-=-=-=-=-=-=-=-=-=-===-=-
Fault bucket 1848500921, type 1
Event Name: APPCRASH
Response: Not available
Cab Id: 0
Problem signature:
P1: InDesign.exe
P2: 7.0.0.355
P3: 4bad00be
P4: GRAPHICS.RPLN
P5: 7.0.0.355
P6: 4bad03d3
P7: c0000005
P8: 0004e1e2
P9:
P10:
Attached files:
C:\Users\User\AppData\Local\Temp\WER162E.tmp.WERInternalMetadata.xml
These files may be available here:
C:\Users\User\AppData\Local\Microsoft\Windows\WER\ReportArchive\AppCrash_InDesign.exe_b042 ec9a818cb8fb57eefe0aacb41c22fdcbb8_10c12aa8
Analysis symbol:
Rechecking for solution: 0
Report Id: 9e59fc2c-5b68-11e3-908c-f46d0497fc9b
Report Status: 0
-=-=-=-=-=-=-=-=-=-=-===-=-
I have tried everything I could think of - removed and reinstalled Adobe CS5, manually removed Adobe folders under %Appdata%\Local and %Appdata%\Remote folders (why can't Adobe delete those things during uninstallation is always a total mystery), changed video adapter drivers, cleaned Temp folders, everything I knew...
None of the other apps like Photoshop or Illustrator CS5 malfunction - only Indesign. What is going on?
Can it conflict with other software we use? We have Bentley Microstation, 3D Max, Office 2010, Kaspersky Antivirus and LOGMEIN installed on this computer...Any clues, guys?

Looks to me like you've never installed any of the patches. Last patch for CS5 was 7.0.4, so I'd start with that and see if ti helps.

[svn] 3216: Fix for MXMLG-228, a visibility problem with graphic elements.

Revision: 3216
Author: [email protected]
Date: 2008-09-15 18:13:11 -0700 (Mon, 15 Sep 2008)
Log Message:
Fix for MXMLG-228, a visibility problem with graphic elements. This is a quick fix that may force extra display objects when toggling visibility. We should investigate alternate solutions if performance is a problem.
Bugs: MXMLG-228
Reviewer: Deepa
QA: Please check for performance problems when toggling visibility of a large number of graphic elements.
Ticket Links:
http://bugs.adobe.com/jira/browse/MXMLG-228
http://bugs.adobe.com/jira/browse/MXMLG-228
Modified Paths:
flex/sdk/trunk/frameworks/projects/flex4/src/flex/graphics/graphicsClasses/GraphicElement .as

Hello Antonio;
After many, many test I discovered that the problem, at least in my case it is caused by the new ACR 4.5. Please read the Thread that I post under Camera Raw. I include the link below.
I also open two Bug Reports about this, but as usual Adobe (and other Software Companies) will never take responsability for this, until one day they release a new version with "enhancements".
PSE6 Organizer Crash with ACR 4.5 (Vista Only?)
http://www.adobeforums.com/webx/.3bb6a869.59b60d3e

Hi guys. i have some problem with a link from a pdf on-line,when i click on it,the page adds a "%" at the and of the link and says "page not found" because of it

Hi guys. i have some problem with a link from a pdf on-line,when i click on it,the page adds a "%" at the and of the link and says "page not found" because of it.
This happens only when a load my pdf file on my server, because if i click on the link when the file is on my iPad, the page opens without problem.
Any help please?
thanx

the % sign is often used when there's a space in a name. HTML doesn't like spaces so it fills them with % or %20
try, on the end of that link, see if there's a space built into the page or the link when the page was made
On the web address you may be able to 'backspace' at the end and erase that space to get the address, but whomever made the page possibly put a mistake in the link

Problem with Help Link in search result screen of PCUI

Hi,
I am trying to access the pcui applications that came out of box with crm using BAB,everthing is working fine but got a problem with "Help" link in top right (beside personalize link) the search result area of all the PCUI screens.
when i click on that i get "page cannot be displayed" error, seems that it is pointing to some wrong URL, where should i change the url to point to our company's help site for that link..
clicking on the properties of that link shows that it is pointing to
javascript:CATshowF1(%20'/sap/bc/bsp/sap/crm_bsp_f1_help/f1help.do?doctype=kw&loio=70B4ED8E03595645A6ABA33B4576BB57&class=IWB_EXTHLP&language=E' );
Please help me in this regard.
Thank you

My response help resolve Kodru's Message which he also posted in EP Implementation Forum. He resolved it by changing the variant noted below.
The link http://help.sap.com/saphelp_crm40/helpdata/EN/70/B4ED8E03595645A6ABA33B4576BB57/content.htm should display Activity Info.
First I would check if the crm_bsp_f1_help service has been activated in SICF.
Secondly I would check the settings in the IMG -> SAP WAS -> Know. Mgt. -> Settings in App. Sys. -> Usage of Help Type "Dynamic Help". The Tab PlainHtmlHttp should have a variant called CRM_HELP, Server Name (help.sap.com) and path.

After Effects won't close/Problems with dynamic links

When I quit After Effects the icon still shows up and it says that it is still open, even force quit will not work. Also having problems with dynamically linked files between after effects and Premiere pro. Rendering in Premiere doesn't work unless I go to AE, save the project, then go back to Premiere. I have OSX Mavericks 10.9.2, a late 2012 mac pro, and AE CC 12.2.1.5

Kevin: would appreciate further thoughts on this.
I am using Pr2014, version 8.0.0 I am using AE2014, version 13.0.2.3. When I was on earlier versions of each, I had no problem importing AE comps into Pr. I'd choose import in Pr, then select the AE project, then select the comp. But with my new and improved versions of AE and Pr, I keep getting "importer reported a generic error."
I also tried to go the other way. I selected in Pr the clips I wanted to work on in AE, and then tried "replace with AE comp" but got the "generic error" message again..
Finally, I attempted to create a Dynamic Link from Pr via the File menu, but with each of the options from there, I got "failed to connect to AE Dynamic Link"
Any advice you can share, would be most welcome.

Strange problem with Database LInk

Hi Everyone,
I have strange problem with Database Link in Oracle 11g Express Edition;
There are two computers: computer-server and computer-client. Tnsnames.ora are the same on both computers ie.
CT =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = krzysztof)(PORT = 1521))
(CONNECT_DATA = (SERVICE_NAME = XE)
I created database link :
Create database link zdalny
Connect to <user_id> identified by <password>
using ‘CT’;
Client can’t connect with server when I am using above command. But when I change “using” for using ‘krzysztof:1521’ or using ‘krzysztof’ or using ‘server IP:1521’ – everything is ok.
Why I am asking. Because in all materials which I am reading about Oracle command with using ‘CT’ should be working correct. But there is not. Do you know, why?
Thanks in advance and apologize for my English.
Rgds
Krzysztof

Krzysztof Szymaniak wrote:
Thanks for all replies.
Below is server's tnsnames.ora
CT =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = krzysztof)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = XE)
EXTPROC_CONNECTION_DATA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1))
(CONNECT_DATA =
(SID = PLSExtProc)
(PRESENTATION = RO)
ORACLR_CONNECTION_DATA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1))
(CONNECT_DATA =
(SID = CLRExtProc)
(PRESENTATION = RO)
SQL Error: ORA-12154: TNS:could not resolve the connect identifier specified
12154. 00000 - "TNS:could not resolve the connect identifier specifie
Rgds
Krzysztof
PS. I tried with using 'XE' - not working.Assuming that is the correct tnsnames, of course XE is not working. You don't have a tnsnames entry for 'XE'.
You need to be aware that when using a dblink, the client is the db in which the link is defined, not the desktop from which you connect to that database.
I think you need to start here:
http://edstevensdba.wordpress.com/2011/02/26/ora-12154tns-03505/
http://edstevensdba.wordpress.com/2011/02/09/sqlnet_overview/ (Help! I can’t connect to my database )
http://edstevensdba.wordpress.com/2011/02/16/sqlnet_client_cfg/ (Help! I can’t connect to my database (part duex) )
The fact that your client (db link) is a database doesn't change anything taught in the above.

Problems with graphics on MacBook Pro / Проблемы с графикой на MacBook Pro

After updating to 10.7.3 are having problems with graphics (screenshot attached).
Installing the Combo update did not solve the problem!
Updating to 10.7.4 did not solve the problem.
What should be done that would solve the problem?
/Russian
После обновления на 10.7.3 возникли проблемы с графикой (скриншот прилагается).
Установка Combo обновления проблему не решила.
Обновление до 10.7.4 проблему не решило.
Что необходимо сделать что бы решить проблему?

Overheating happens when I use heavy graphics applications. At the moment, MBP cold, but the problem occurred. But if the application is rolled up and open again, the artifacts disappear. The problem occurs 3 ... 5 times a day, which is very annoying. In 10.7.2 before updating to 10.7.3 had no problems.
MBP 13" (mid 2010)
/russian
Перегрев бывает, когда я использую тяжелые графические приложения. В данный момент MBP холодный, но проблема произошла. Но если приложение свернуть и открыть снова, артефакты исчезают. Проблема возникает 3...5 раз в день, что сильно раздражает. В 10.7.2 до обновления до 10.7.3 проблем не было.

Problem with a link that repeat between al pages

I do something wrong with my book , now i have alink between each page that start from page 3 and also when i delet a page it will be move to another page . this is the screen shot of my problem , how can i remove this link (line)

that is just the indicator that one frame is linked to the next. look under the view menu...i am working from my phone and off the top of my head cannot remember the precise menu item.

Problem with subrpt links in crystal reports 8.5 (cr 9 and 2008 installed)

I am trying to add a subreport to an existing CR 8.5 report. I currently have Cr 8.5, cr 9 and cr 2008 on my pc (xp). The subrpt is pointing to a sql 2005 stored procedure that has a parameter (@vvcrCono). When I try to set up the link, the parameter is not listed in the of available parameters to link to. I select a field from the available fields on the main report, hit the > to move it over as a field to link to, and the dropdown that contains the list of parms to link to on the subreport will change to ?pm-(fieldname). I do not see the parm list from the subreport. I am unable to get the link defined. This occurs even when trying to edit an existing subreport.
Is there a problem with running these crystal report versions on the same machine? Or am I just missing something? It has been a while since I've used cr 8.5.

Joanne, thank you for your posted solution and specifically your mention of miniscule scroll bar of the 'subreport parameter field to use' drop down, I had been on several forums but none of them mentioned this, my subreport now accepts the passed parameter and main report works well. Hope your post helps others as it did me, only wish we could include a graphic to illustrate this as I have seen same question posed several times and several different msg boards.

Problem with retiriving links froma web page

hi friends,
ca n anyone help me out.i am trying to retrieve all the links from a web page .but all the linkjs are not being retrieved.can anyone tell me why.
here i am submitting the code of it.
private static ArrayList retrieveLinks(URL pageUrl, String pageContents, HashSet crawledList,boolean limitHost)
// Compile link matching pattern.
Pattern p = Pattern.compile("<a\\s+href\\s*=\\s*\"?(.*?)[\"|>]", Pattern.CASE_INSENSITIVE );
Matcher m = p.matcher(pageContents);
// Create list of link matches.
ArrayList linkList = new ArrayList();
while (m.find()) {
String link = m.group(1).trim();
// Skip empty links.
if (link.length() < 1) {
continue;
// Skip links that are just page anchors.
if (link.charAt(0) == '#') {
continue;
// Skip mailto links.
if (link.indexOf("mailto:") != -1) {
continue;
// Skip JavaScript links.
if (link.toLowerCase().indexOf("javascript") != -1) {
continue;
// Prefix absolute and relative URLs if necessary.
if (link.indexOf("://") == -1) {
// Handle absolute URLs.
if (link.charAt(0) == '/') {
link = "http://" + pageUrl.getHost() + link;
// Handle relative URLs.
} else {
String file = pageUrl.getFile();
if (file.indexOf('/') == -1) {
link = "http://" + pageUrl.getHost() + "/" + link;
} else {
String path =
file.substring(0, file.lastIndexOf('/') + 1);
link = "http://" + pageUrl.getHost() + path + link;
// Remove anchors from link.
int index = link.indexOf('#');
if (index != -1) {
link = link.substring(0, index);
// Remove leading "www" from URL's host if present.
link = removeWwwFromUrl(link);
// Verify link and skip if invalid.
URL verifiedLink = verifyUrl(link);
if (verifiedLink == null) {
continue;
/* If specified, limit links to those
having the same host as the start URL. */
if (limitHost && !pageUrl.getHost().toLowerCase().equals(verifiedLink.getHost().toLowerCase()))
System.out.println("the given link does not exist");
continue;
// Skip link if it has already been crawled.
if (crawledList.contains(link)) {
continue;
// Add link to list.
linkList.add(link);
return (linkList);
Hope some one can help me outr of this .i susupect some problem with the regular expression used.
it is unable to parse links like
http://www.cricinfo.com/ci/engine/current/match/scores/live.html
http://www.cricinfo.com/nzvind2009/content/current/series/366616.html

kathiksagar wrote:
i dont have much idea about html parser
can u tell me how to do itHere are a couple of free parser written in Java:
[http://java-source.net/open-source/html-parsers]
I'm sure many of them have a manual, and/or have example code on their website on how to use it.
Good luck.

Problems with graphics drivers

Hello, I tried to install new drivers to my Ati 6770m (2gb) and there is a problem with almost every driver. For example the newest ati catalyst 14.5 beta. When the driver is installed, I can't switch to the resolution higher than 1024x768. Ati catalyst control centre is not installed or I there is an error message saying, that the driver is not installed correctly so the control centre can't open. Sometimes the system crashes to the blue screen and I have to reboot. I see this problem with various drivers. The only driver, that is working for me is Ati Catalyst 13.10 mobility beta. And with this driver there's a lot of graphic problems with GTA V. I see squares on all objects in distance when dx11 and AA is turned on. It is unplayable with this driver. Please help.

Hey @Tommy2220 ,
Thanks for the additional information. If you uninstall all that you have in the graphic drivers section of the Device manager, including the drivers that are present. Restart the Notebook, and download from here. You will only need AMD/Intel Switchable High-Definition (HD) Graphics Driver, it includes everything you will need.
You can also find them , here is a link to the HP Support Assistant if you need it. Just download and run the application and it will help with the software and drivers on your system.
Hope this helps you out.
Thanks.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

Crystal Reports with Graphical Linking on Multiple Data source

Hello
I have a report which uses graphical linking on 6 tables/views which acts as the data source.
4 are on HANA and 2 on a legacy system.
Record selection filters are applied to filter data.
Report's performance is incredibly slow on running for higher date ranges even for less than a month bringing back < 10000 records.
Please suggest any tips to improve this.
already tried below :
Checked no printer option
Removed Page N of M control
Changed Order links to pick small tables first
Crystal Reports 2013 connecting via ODBC to HANA and legacy
-Jayakrishnan

Hi Jayakrishnan,
When you join tables from multiple datasources, CR processes the joins and any record selection criteria locally. This is what slows down the report.
The only way to speed up performance is to have all the data atleast come from the same database or even better, creating a view that has all the required tables and joins.
-Abhilash

How can i downgrade to bootcamp 3.1? many problems with graphic driver of bootcamp 3.2

How can i downgrade to bootcamp 3.1? I have many graghic problems with bootcamp 3.2. such as black screen and kernel resetting also fan almost permanent working and high temperature. all of them after installing bootcamp 3.2 on my windows 7(64).

I updated my graphic driver and the kernel resetting seems to be solved. but fan working is still unsolved.
after installing bootcamp 3.2, whenever I open an Internet page with flash clips in there or watch even a low quality movie, fan start working hard. I updated flash player and other plugins but nothing happens.

Problems with graphics [link removed]

Similar Messages

Maybe you are looking for