Problems with guest access radius/local accounts?
I have a setup running with 2 2100 controllers. I want to authenticate guest users either using Radius if they exists there, and if not using a guest account set up from WCS.
It's working if I create a local net user from the controller, but not if I create the guest account from the WCS. The account created from the wcs shows up in the controller under local net users, but if I try to login I get this message in the controller:
AAA Authentication Failure for UserName:test User Type: WLAN USER
So it's trying with radius. But what is the difference from creating a guest user directly on the controller. Is this a bug? I'm running 5.2.178.0 on the controller and WCS 5.2.130.0.
The way I understand is there is no difference in the guest accounts created through WCS and WLC. If you are creating the users locally on the controllers, you need to repeat the procedure by logging into each controller. This can be a time consuming task. Instead, you can create the guest accounts on the WCS and push them to the controllers at one go.
You may want to delete the guest accounts on the WLC and WCS and try to reconfigure the guest accounts on the WCS and push them to the controllers and check if you are seeeing this issue. Because if the configs are correct and the user is providing the correct username / password the setup should work.
Similar Messages
-
I have recently had a problem with one of my hotmail accounts, some sort of virus sending random emails from my address book. Hotmail advised me to delete all contacts and change the password for that account, which I did on my laptop running windows XP. The change was successful and I was able to send and receive emails with no problem. I then had to change the account password on my iPhone 4s, which I did and it too was successful but when I came to change the password on my iMac, running the latest version of Lion it would not recognise the new password. I have tried to remove the account details and re-install but every time I go to add new account my old details are in the box. This is very frustrating as I use my iMac for all my profects and I need to access my email. Please help.
hi guys,
I had already deleted all reference to the hotmail account in question from the keychain access app, I have also tried to delete and re-instal the account details from within mail. The icon in the side bar dissapears but when I go to Add Account, the old account details are in the new account box. I then input my new password but am told that the server does not recognise it. If I access hotmail via google on the iMac I can get into my account with no problems. I am thinking there must be some other form of security system within the mac software that is blocking the new password. This is driving me nuts. I have been trying to resolve this for the last two days. Thank you for your advise anyway. -
Problem with file access in other computer in jsp
I have problem with file accessing in other computer in jsp.
The follow code
File folder=new File("Z:"+File.separator+"sharefolder");//Z is a net share driver
File[] files=folder.listFiles();
System.out.println("test");
System.out.println("length="+files.length);
will throw exception at the second print.
but it works well in main funtion.
Is anybody know what is the problem.
JSP works on windows2003 server,tomcat 5.0.28 JDK1.4 net share folder on windows2000 serverno error code for this.But when I start tomcat I get the follow error.
java.lang.IllegalArgumentException: Document base Z:\ does not exist or is not a readable directory
at org.apache.naming.resources.FileDirContext.setDocBase(FileDirContext.java:138)
at org.apache.catalina.core.StandardContext.resourcesStart(StandardContext.java:3910)
at org.apache.catalina.core.StandardContext.start(StandardContext.java:4138)
at org.apache.catalina.core.ContainerBase.addChildInternal(ContainerBase.java:823)
at org.apache.catalina.core.ContainerBase.addChild(ContainerBase.java:807)
at org.apache.catalina.core.StandardHost.addChild(StandardHost.java:595)
at org.apache.catalina.core.StandardHostDeployer.addChild(StandardHostDeployer.java:903)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:585)
at org.apache.commons.beanutils.MethodUtils.invokeMethod(MethodUtils.java:216)
at org.apache.commons.digester.SetNextRule.end(SetNextRule.java:256)
at org.apache.commons.digester.Rule.end(Rule.java:276)
at org.apache.commons.digester.Digester.endElement(Digester.java:1058)
at org.apache.catalina.util.CatalinaDigester.endElement(CatalinaDigester.java:76)
at org.apache.xerces.parsers.AbstractSAXParser.endElement(Unknown Source)
at org.apache.xerces.impl.XMLDocumentFragmentScannerImpl.scanEndElement(Unknown Source)
at org.apache.xerces.impl.XMLDocumentFragmentScannerImpl$FragmentContentDispatcher.dispatch(Unknown Source)
at org.apache.xerces.impl.XMLDocumentFragmentScannerImpl.scanDocument(Unknown Source)
at org.apache.xerces.parsers.XML11Configuration.parse(Unknown Source)
at org.apache.xerces.parsers.XML11Configuration.parse(Unknown Source)
at org.apache.xerces.parsers.XMLParser.parse(Unknown Source)
at org.apache.xerces.parsers.AbstractSAXParser.parse(Unknown Source)
at org.apache.commons.digester.Digester.parse(Digester.java:1567)
at org.apache.catalina.core.StandardHostDeployer.install(StandardHostDeployer.java:488)
at org.apache.catalina.core.StandardHost.install(StandardHost.java:863)
at org.apache.catalina.startup.HostConfig.deployDescriptors(HostConfig.java:483)
at org.apache.catalina.startup.HostConfig.deployApps(HostConfig.java:427)
at org.apache.catalina.startup.HostConfig.start(HostConfig.java:983)
at org.apache.catalina.startup.HostConfig.lifecycleEvent(HostConfig.java:349)
at org.apache.catalina.util.LifecycleSupport.fireLifecycleEvent(LifecycleSupport.java:119)
at org.apache.catalina.core.ContainerBase.start(ContainerBase.java:1091)
at org.apache.catalina.core.StandardHost.start(StandardHost.java:789)
at org.apache.catalina.core.ContainerBase.start(ContainerBase.java:1083)
at org.apache.catalina.core.StandardEngine.start(StandardEngine.java:478)
at org.apache.catalina.core.StandardService.start(StandardService.java:480)
at org.apache.catalina.core.StandardServer.start(StandardServer.java:2313)
at org.apache.catalina.startup.Catalina.start(Catalina.java:556)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:585)
at org.apache.catalina.startup.Bootstrap.start(Bootstrap.java:287)
at org.apache.catalina.startup.Bootstrap.main(Bootstrap.java:425)
Jun 5, 2006 6:55:41 PM org.apache.catalina.core.StandardContext start
SEVERE: Error in resourceStart()
Jun 5, 2006 6:55:41 PM org.apache.catalina.core.StandardContext start
SEVERE: Error getConfigured
Jun 5, 2006 6:55:41 PM org.apache.catalina.core.StandardContext start
SEVERE: Context startup failed due to previous errors
Jun 5, 2006 6:55:41 PM org.apache.catalina.core.StandardContext start
SEVERE: Exception during cleanup after start failed
LifecycleException: Container StandardContext[msgstore] has not been started
at org.apache.catalina.core.StandardContext.stop(StandardContext.java:4466)
at org.apache.catalina.core.StandardContext.start(StandardContext.java:4371)
at org.apache.catalina.core.ContainerBase.addChildInternal(ContainerBase.java:823)
at org.apache.catalina.core.ContainerBase.addChild(ContainerBase.java:807)
at org.apache.catalina.core.StandardHost.addChild(StandardHost.java:595)
at org.apache.catalina.core.StandardHostDeployer.addChild(StandardHostDeployer.java:903)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:585)
at org.apache.commons.beanutils.MethodUtils.invokeMethod(MethodUtils.java:216)
at org.apache.commons.digester.SetNextRule.end(SetNextRule.java:256)
at org.apache.commons.digester.Rule.end(Rule.java:276)
at org.apache.commons.digester.Digester.endElement(Digester.java:1058)
at org.apache.catalina.util.CatalinaDigester.endElement(CatalinaDigester.java:76)
at org.apache.xerces.parsers.AbstractSAXParser.endElement(Unknown Source)
at org.apache.xerces.impl.XMLDocumentFragmentScannerImpl.scanEndElement(Unknown Source)
at org.apache.xerces.impl.XMLDocumentFragmentScannerImpl$FragmentContentDispatcher.dispatch(Unknown Source)
at org.apache.xerces.impl.XMLDocumentFragmentScannerImpl.scanDocument(Unknown Source)
at org.apache.xerces.parsers.XML11Configuration.parse(Unknown Source)
at org.apache.xerces.parsers.XML11Configuration.parse(Unknown Source)
at org.apache.xerces.parsers.XMLParser.parse(Unknown Source)
at org.apache.xerces.parsers.AbstractSAXParser.parse(Unknown Source)
at org.apache.commons.digester.Digester.parse(Digester.java:1567)
at org.apache.catalina.core.StandardHostDeployer.install(StandardHostDeployer.java:488)
at org.apache.catalina.core.StandardHost.install(StandardHost.java:863)
at org.apache.catalina.startup.HostConfig.deployDescriptors(HostConfig.java:483)
at org.apache.catalina.startup.HostConfig.deployApps(HostConfig.java:427)
at org.apache.catalina.startup.HostConfig.start(HostConfig.java:983)
at org.apache.catalina.startup.HostConfig.lifecycleEvent(HostConfig.java:349)
at org.apache.catalina.util.LifecycleSupport.fireLifecycleEvent(LifecycleSupport.java:119)
at org.apache.catalina.core.ContainerBase.start(ContainerBase.java:1091)
at org.apache.catalina.core.StandardHost.start(StandardHost.java:789)
at org.apache.catalina.core.ContainerBase.start(ContainerBase.java:1083)
at org.apache.catalina.core.StandardEngine.start(StandardEngine.java:478)
at org.apache.catalina.core.StandardService.start(StandardService.java:480)
at org.apache.catalina.core.StandardServer.start(StandardServer.java:2313)
at org.apache.catalina.startup.Catalina.start(Catalina.java:556)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:585)
at org.apache.catalina.startup.Bootstrap.start(Bootstrap.java:287) -
After performing a routine software update this week, I am having problems with both of my email accounts. I am unable to "Reply" to any emails. Does anyone have a solution to this problem?
I am having the same problem also Thought it was my network and reset everything including Apple TV but still the problem is there . I assume now it is down to iOS 8 prior to that was perfect
-
Strange problem with App Id on developer account
Hi,
I have very strange problem with App Id on developer account.
We have uploaded one project with App Id(com.yourcompany.app) and its ready for sale now. Now we have to release update for this application but we could not find that App Id(com.yourcompany.app) on developer account. But strange is that i could not see delete option for App Id.
If i try to create new App Id with com.yourcompany.app name then it shows that it is already being used please select any other name.
Does anyone has faced this type of problem.
Regards,You shouldn't need to enter the App Id when updating your app. Could you please describe the page in which you're asked for the App Id, and describe how you got to that page?
For example, if I wanted to update Version 1.2 of Ray'sApp, I would log into ITC, then click on +Manage Your Applications+ to get to the "Manage Your Applications" page. On this page I see the icon for every app I have in the store. I then click on the icon for Ray'sApp 1.2 to get to the page titled "Ray'sApp". Next I click the 4th selection to the right on that page: +Update Application+, click No and Continue on the "Export Compliance" page, and get to the "Upload Application" page. On that page I fill in Version Number: 1.3, Language English, Name: Ray'sApp, Keywords ..., What's New in this Version: ..., and the Apple Content Descriptions table. Then I upload the binary.
Following the above example, show us how you got to a step that requested the App Id. Else you might refer to Page 86: Version Updates in the iTunes Connect Developer Guide. In that case, please explain how your update experience differed from the steps in the Guide.
\- Ray -
Problem with Mail accessing Gmail account
I don't know if this is a problem with Gmail or with my Mac, but any hints appreciated. I did some tidying of my Mac permissions this morning, and since then my Mail programme refuses to accept my Gmail application-specific passwords. (Both incoming and outgoing.) I have revoked the old ones and started again but it makes no difference. One thing that seems odd is that on the Gmail page for setting up the passwords, it lists my passwords at the bottom of the page with 'created date' but under 'last used date' it says 'unavailable'. I don't know if this is significant.
Any ideas how I solve this? I am using Mac OS 10.7.2, and Mail 5.An update on this: I just tried to enter my POP password by going into Mail's Preferences (rather than just typing it in when prompted by a pop-up window), and got the following:
Error Saving Preferences:
Writing your preferences to disk has failed. Your preferences may not have been saved. The permissions on ~/Library/Preferences may be wrong or your disk may be full.
Help!! What have I done?! -
Hi *,
I have the following problem with RADIUS and EAP authentication.
Radius server sends an "Access-Accept" packet to my AP, but the station does not authenticate.
I've tried with different encryption configuration and with different authentication methods under "dot11 essid", but nothing changes...
What could it be?
Debug piece and configuration follows:
*Jan 25 14:23:34.795: RADIUS/ENCODE(00000012): acct_session_id: 17*Jan 25 14:23:34.795: RADIUS(00000012): sending*Jan 25 14:23:34.799: RADIUS: 4E 47 56 7A 78 65 4A 4F 55 31 47 40 77 6C 61 6E [NGVzxeJOU1G@wlan]*Jan 25 14:23:34.799: RADIUS: 2E 6D 6E 63 30 30 31 2E 6D 63 63 30 30 31 2E 33 [.mnc001.mcc001.3]*Jan 25 14:23:34.799: RADIUS: 67 70 70 6E 65 74 77 6F 72 6B 2E 6F 72 67 [gppnetwork.org]*Jan 25 14:23:34.799: RADIUS: NAS-Port-Type [61] 6 802.11 wireless [19]*Jan 25 14:23:34.799: RADIUS: NAS-Port [5] 6 265 *Jan 25 14:23:34.799: RADIUS: NAS-Port-Id [87] 5 "265"*Jan 25 14:23:34.799: RADIUS: NAS-IP-Address [4] 6 192.168.173.2 *Jan 25 14:23:34.811: RADIUS/DECODE: EAP-Message fragments, 20, total 20 bytes*Jan 25 14:23:34.831: RADIUS/ENCODE(00000012):Orig. component type = DOT11*Jan 25 14:23:34.831: RADIUS: AAA Unsupported Attr: ssid [265] 8 *Jan 25 14:23:34.831: RADIUS: 57 69 66 69 45 41 [WifiEA]*Jan 25 14:23:34.831: RADIUS: AAA Unsupported Attr: interface [157] 3 *Jan 25 14:23:34.831: RADIUS: 32 [2]*Jan 25 14:23:34.831: RADIUS(00000012): Config NAS IP: 192.168.173.2*Jan 25 14:23:34.831: RADIUS/ENCODE(00000012): acct_session_id: 17*Jan 25 14:23:34.835: RADIUS(00000012): sending*Jan 25 14:23:34.835: RADIUS: 10 01 00 01 07 05 00 00 D9 37 C3 D9 79 3E 33 EA [?????????7??y>3?]*Jan 25 14:23:34.835: RADIUS: F3 7D 73 43 BF BA D0 6A [?}sC???j]*Jan 25 14:23:34.835: RADIUS: NAS-Port-Type [61] 6 802.11 wireless [19]*Jan 25 14:23:34.835: RADIUS: NAS-Port [5] 6 265 *Jan 25 14:23:34.835: RADIUS: NAS-Port-Id [87] 5 "265"*Jan 25 14:23:34.835: RADIUS: NAS-IP-Address [4] 6 192.168.173.2 *Jan 25 14:23:35.035: RADIUS: Received from id 1645/64 192.168.177.158:1812, Access-Challenge, len 304*Jan 25 14:23:35.039: RADIUS: 46 10 78 5F 5F B0 CB 6C 0B 05 00 00 DA C3 BF 28 [F?x__??l???????(]*Jan 25 14:23:35.039: RADIUS: E0 18 2B 95 97 C2 0A D7 40 53 FE 62 [??+?????@S?b]*Jan 25 14:23:35.039: RADIUS(00000012): Received from id 1645/64*Jan 25 14:23:35.039: RADIUS/DECODE: EAP-Message fragments, 60+220, total 280 bytes*Jan 25 14:23:35.355: RADIUS/ENCODE(00000012):Orig. component type = DOT11*Jan 25 14:23:35.355: RADIUS: AAA Unsupported Attr: ssid [265] 8 *Jan 25 14:23:35.355: RADIUS: 57 69 66 69 45 41 [WifiEA]*Jan 25 14:23:35.355: RADIUS: AAA Unsupported Attr: interface [157] 3 *Jan 25 14:23:35.359: RADIUS: 92 DA 5E 26 CF 40 01 22 7A 8E F5 C1 [??^&?@?"z???]*Jan 25 14:23:35.359: RADIUS: NAS-Port-Type [61] 6 802.11 wireless [19]*Jan 25 14:23:35.359: RADIUS: NAS-Port [5] 6 265 *Jan 25 14:23:35.359: RADIUS: NAS-Port-Id [87] 5 "265"*Jan 25 14:23:35.359: RADIUS: NAS-IP-Address [4] 6 192.168.173.2 *Jan 25 14:23:35.367: RADIUS: Received from id 1645/65 192.168.177.158:1812, Access-Accept, len 30*Jan 25 14:23:35.367: RADIUS: authenticator 8C 2C 1B 97 82 BB 6C 7F - AA D3 4A AB CA 22 8B B7*Jan 25 14:23:35.367: RADIUS: EAP-Message [79] 10 *Jan 25 14:23:35.367: RADIUS: 03 01 00 04 00 00 00 00 [????????]*Jan 25 14:23:35.371: RADIUS(00000012): Received from id 1645/65*Jan 25 14:23:35.371: RADIUS/DECODE: EAP-Message fragments, 8, total 8 bytes*Jan 25 14:23:35.671: %DOT11-7-AUTH_FAILED: Station d023.dbb8.d6a9 Authentication failed
Config:
aaa new-model!aaa group server radius rad_eap server-private 192.168.177.158 auth-port 1812 acct-port 1813 key 7 044803071D2448!aaa authentication login eap_methods group rad_eapaaa authorization exec default if-authenticated aaa authorization network default if-authenticated ! aaa session-id commonip name-server 192.168.177.45! dot11 ssid WifiEAP1 vlan 10 authentication open eap eap_methods authentication shared eap eap_methods authentication key-management wpa optional guest-mode! bridge irb! interface Dot11Radio0 no ip address no ip route-cache ! encryption vlan 10 mode ciphers aes-ccm tkip wep128 ! broadcast-key vlan 10 change 300 ! ssid WifiEAP1 ! antenna gain 0 station-role root! interface Dot11Radio0.10 encapsulation dot1Q 10 native no ip route-cache bridge-group 1 bridge-group 1 subscriber-loop-control bridge-group 1 block-unknown-source no bridge-group 1 source-learning no bridge-group 1 unicast-flooding bridge-group 1 spanning-disabled! interface GigabitEthernet0 ip address 192.168.173.3 255.255.255.0 no ip route-cache! interface GigabitEthernet0.1 encapsulation dot1Q 10 native no ip route-cache bridge-group 1 no bridge-group 1 source-learning bridge-group 1 spanning-disabled! interface BVI1 ip address 192.168.173.2 255.255.255.0 no ip route-cache!ip radius source-interface BVI1 bridge 1 route ip
thanks so much!Stefano: not sure if related but there is an unsupported attribute in the debugs:
Jan 25 14:23:35.355: RADIUS: AAA Unsupported Attr:
*Jan 25 14:23:35.355: RADIUS: 57 69 66 69 45 41
*Jan 25 14:23:35.355: RADIUS: AAA Unsupported Attr: interface
Try to eliminate any configured attributes on radius except those in IETF radius. Then try again.
You may also chech by removing the shared eap as suggested above. Let us know if this works.
Sent from Cisco Technical Support iPad App -
Hi guys,
I've been trying to access the Market Place as well as my account at: www.renderosity.com, but when I click to the Market Place on the link I get the message below (included also is my correspondence with the site's admin). I can access the rest of the site with no seeming problem. And it seems to be only that site that I have been having problems with. I have Java enabled and the block pop-up is unchecked. But it is only with that site that I am having problems with. They have had no reports of any problems from their side. Thanks for any help. Please reply to my other e-mail: [email protected]
Cheers;-)
Michael
404 Not Found
http://219.235.223.223/forbid.htm
Not Found
The requested URL /forbid.htm was not found on this server.
Apache/1.3.22 Server at WebRoad Port 80
Hi Michael,
Do you have javascript enabled? Are you running any security software?
Karen
Michael Boatwright wrote:
Hi Karen,
I finally managed to get through to the Market Place, but this is how the page looked (See Attached image). Any ideas? I still cannot get into my account though.
Hi Michael,
I've never seen that url before which is why I got confused.
Try this one and let me know if you have problems.
http://market.renderosity.com/
Regards,
Debbie Montique
MarketPlace Manager
Michael Boatwright wrote:
Hi Deb,
and thanks for the quick reply. That URL is what shows up when I click on the Market Place Home. Maybe it's just temporary. I certainly hope so! I've never had this problem before. I guess time will tell. Thanks again.
Cheers,
Michael
Hi Michael,
We're not aware of any problem on the site. Can you please give me the exact URL that you are trying to access?
Additionally, it may be helpful if you log out of Renderosity, empty your cookies and cache on your browser, and then sign back in and see if that resolves the problem.
Kind regards,
Karen Janes
Renderosity Admin Team
Michael Boatwright wrote:
Hi guys,
I have never had problems before with access to any part of Rendo and even now I can access parts of your site, but I can neither access my account nor the market place. Is there something going on from your end? Here is the message that I'm getting when I try to get to those parts of the site that I just mentioned:Hi Ayesh,
Per my test, it seems that the Site Collection Access is only available for the local group of that site collection which is used to store the site collection local term sets.
To make the site collection local group available, please refer to the steps in the link below:
http://www.dotnetsharepoint.com/2013/10/how-to-get-site-collection-local-term.html#.U-PVOvmSyd5
After that, you will see the Site Collection Access when you click the group in Term Store Management.
Best regards.
Thanks
Victoria Xia
TechNet Community Support -
Remote Delta link setup problem with Bean / Access Service
Hello,
I am trying to setup Remote Delta Link (RDL) between two portals. (Both portals same version - EP 7.0 EHP1 SP 05 - are in the same domain)
I already have the Remote Role Assignment working without any issues.
The following have been done successfully:
1. Same user repository has been setup for both the portals
2. Setup trust between producer and consumer (SSO working fine)
3. Producer added and registered succesfully on consumer
4. Permissions setup on producer and consumer
4. pcd_service user with required UME actions setup
I am able to see all the remote content in the Consumer portal.
When I try to copy the remote content and paste it as local content, I am getting the following error:
Could not create remote delta link to object 'page id'. Could not connect to the remote portal. The remote portal may be down, there may be a network problem, or your connection settings to the remote portal may be configured incorrectly.
After increasing the log severity, I am able to see the following in Default Trace:
com.sap.portal.fpn.transport.Trying to lookup access service (P4-RMI) for connecting to producer 'ess_int' with information: com.sap.portal.fpn.remote.AccessServiceInformation@31c92207[connectionURL=hostname.mycompany.com:50004, shouldUseSSL=false, RemoteName=AccessService]
com.sap.portal.fpn.transport.Unable to lookup access service (P4-RMI) with information: com.sap.portal.fpn.remote.AccessServiceInformation@31c92207[connectionURL=hostname.mycompany.com:50004, shouldUseSSL=false, RemoteName=AccessService]
AbstractAdvancedOperation.handleDirOperationException
[EXCEPTION]
com.sap.portal.pcm.admin.exceptions.DirOperationFailedException: Could not retrieve the bean / access service to connect with producer
Could not retrieve the bean / access service to connect with producer
Like you can see above, there is some bean / access service which is not retrieved successfully. I am not sure if this is a permission problem on the consumer.
I have checked that the P4 ports are configured correctly (standard - not changed) and I am able to telnet from producer to consumer (and vice versa) on the P4 port.
I am stuck at this point and am not able to find any information on this.
I would really appreciate if some one can point me in the right direction.
Thank you for reading.
- RajHi Raj,
Please check your config of the P4 port on the producer. Is it really 50004 (check SystemInfo of the producer)?
I do think there's a problem with the P4 communication since RDL requires P4 connection.
Do you have load balanced consumer-producer connection? Please refer to this blog for further details
Little known ways to create a load balanced Consumer Producer connection in a FPN scenario
Regards,
Dao -
Still having problems with VPN access
Hello!
I am having problems with my VPN clients getting access to the networks over a MPLS infrastruture. I can reach these resources form my Core network (172.17.1.0/24) and my Wifi (172.17.100.0/24) but not from my VPN network (172.17.200.0/24). From the VPN I can reach the Wifi network (which is behind a router) and the rule that allows that also allows access to the other networks but for some reason it is not working.
When I ping inside the core network from VPN I can connect and get responses. When I ping to the Wifi network, I can get responses and connect to resources there. A tracert to the wifi network shows it hitting the core switch (a 3750 stack) @ 172.17.1.1, then the Wifi router (172.17.1.3) and then the host. A tracert to a resource on the MPLS network from the VPN shows a single entry (the destination host) and then 29 time outs but will not ping that resource nor connect.
I've posted all the info I can think of below. Any help appreciated.
*** Here is a tracert from a core network machine to the resource we need on the MPLS:
C:\Windows\system32>tracert 10.2.0.125
Tracing route to **************** [10.2.0.125]
over a maximum of 30 hops:
1 1 ms <1 ms <1 ms 172.17.1.1
2 1 ms <1 ms <1 ms 172.17.1.10
3 5 ms 5 ms 5 ms 192.168.0.13
4 31 ms 30 ms 31 ms 192.168.0.5
5 29 ms 30 ms 29 ms 192.168.0.6
6 29 ms 29 ms 29 ms 192.168.20.4
7 29 ms 29 ms 29 ms RV-TPA-CRMPROD [10.2.0.125]
Trace complete.
172.17.1.10 is the mpls router.
**** Here is the routing table (sh ip route) from the 3750 @ 172.17.1.1
Gateway of last resort is 172.17.1.2 to network 0.0.0.0
S 192.168.30.0/24 [1/0] via 172.17.1.10
172.17.0.0/24 is subnetted, 3 subnets
S 172.17.200.0 [1/0] via 172.17.1.2
C 172.17.1.0 is directly connected, Vlan20
S 172.17.100.0 [1/0] via 172.17.1.3
172.18.0.0/24 is subnetted, 1 subnets
S 172.18.1.0 [1/0] via 172.17.1.10
S 192.168.11.0/24 [1/0] via 172.17.1.10
10.0.0.0/8 is variably subnetted, 4 subnets, 2 masks
S 10.2.0.0/24 [1/0] via 172.17.1.10
S 10.10.10.0/24 [1/0] via 172.17.1.10
S 10.20.0.0/24 [1/0] via 172.17.1.10
S 10.3.0.128/25 [1/0] via 172.17.1.10
S 192.168.1.0/24 [1/0] via 172.17.1.10
S* 0.0.0.0/0 [1/0] via 172.17.1.2
*** Here is the firewall config (5510):
ASA Version 8.4(1)
hostname RVGW
domain-name ************
enable password b5aqRk/6.KRmypWW encrypted
passwd 1ems91jznlfZHhfU encrypted
names
interface Ethernet0/0
nameif Outside
security-level 10
ip address 5.29.79.10 255.255.255.248
interface Ethernet0/1
nameif Inside
security-level 100
ip address 172.17.1.2 255.255.255.0
interface Ethernet0/2
shutdown
no nameif
no security-level
no ip address
interface Ethernet0/3
shutdown
no nameif
no security-level
no ip address
interface Management0/0
nameif management
security-level 100
ip address 172.19.1.1 255.255.255.0
management-only
banner login RedV GW
ftp mode passive
dns server-group DefaultDNS
domain-name RedVector.com
same-security-traffic permit inter-interface
same-security-traffic permit intra-interface
object network WiFi
subnet 172.17.100.0 255.255.255.0
description WiFi
object network inside-net
subnet 172.17.1.0 255.255.255.0
object network NOSPAM
host 172.17.1.60
object network BH2
host 172.17.1.60
object network EX2
host 172.17.1.61
description Internal Exchange / Outbound SMTP
object network Mail2
host 5.29.79.11
description Ext EX2
object network NETWORK_OBJ_172.17.1.240_28
subnet 172.17.1.240 255.255.255.240
object network NETWORK_OBJ_172.17.200.0_24
subnet 172.17.200.0 255.255.255.0
object network VPN-CLIENT
subnet 172.17.200.0 255.255.255.0
object-group service DM_INLINE_TCP_1 tcp
port-object eq www
port-object eq https
object-group network DM_INLINE_NETWORK_1
network-object object BH2
network-object object NOSPAM
object-group network VPN-CLIENT-PAT-SOURCE
description VPN-CLIENT-PAT-SOURCE
network-object object VPN-CLIENT
object-group network LAN-NETWORKS
network-object 10.10.10.0 255.255.255.0
network-object 10.2.0.0 255.255.255.0
network-object 10.3.0.0 255.255.255.0
network-object 172.17.100.0 255.255.255.0
network-object 172.18.1.0 255.255.255.0
network-object 192.168.1.0 255.255.255.0
network-object 192.168.11.0 255.255.255.0
network-object 192.168.30.0 255.255.255.0
object-group network VPN-POOL
network-object 172.17.200.0 255.255.255.0
object-group protocol DM_INLINE_PROTOCOL_1
protocol-object ip
protocol-object icmp
access-list Outside_access_in extended permit tcp any object-group DM_INLINE_NETWORK_1 eq smtp
access-list Outside_access_in extended permit tcp any object BH2 object-group DM_INLINE_TCP_1
access-list global_mpc extended permit ip any any
access-list Inside_access_in extended permit object-group DM_INLINE_PROTOCOL_1 any any
pager lines 24
logging enable
logging asdm informational
no logging message 106015
no logging message 313001
no logging message 313008
no logging message 106023
no logging message 710003
no logging message 106100
no logging message 302015
no logging message 302014
no logging message 302013
no logging message 302018
no logging message 302017
no logging message 302016
no logging message 302021
no logging message 302020
flow-export destination Inside 172.17.1.52 9996
mtu Outside 1500
mtu Inside 1500
mtu management 1500
ip local pool VPN 172.17.1.240-172.17.1.250 mask 255.255.255.0
ip local pool VPN2 172.17.200.100-172.17.200.200 mask 255.255.255.0
no failover
icmp unreachable rate-limit 1 burst-size 1
no asdm history enable
arp timeout 14400
nat (Inside,Outside) source static EX2 Mail2
nat (Inside,Outside) source static any any destination static NETWORK_OBJ_172.17.1.240_28 NETWORK_OBJ_172.17.1.240_28
nat (Inside,Outside) source static any any destination static NETWORK_OBJ_172.17.200.0_24 NETWORK_OBJ_172.17.200.0_24
nat (Inside,Outside) source static inside-net inside-net destination static NETWORK_OBJ_172.17.1.240_28 NETWORK_OBJ_172.17.1.240_28
nat (Inside,Outside) source static LAN-NETWORKS LAN-NETWORKS destination static VPN-POOL VPN-POOL
object network inside-net
nat (Inside,Outside) dynamic interface
object network NOSPAM
nat (Inside,Outside) static 5.29.79.12
nat (Outside,Outside) after-auto source dynamic VPN-CLIENT-PAT-SOURCE interface
access-group Outside_access_in in interface Outside
access-group Inside_access_in in interface Inside
route Outside 0.0.0.0 0.0.0.0 5.29.79.9 1
route Inside 10.2.0.0 255.255.255.0 172.17.1.1 1
route Inside 10.3.0.0 255.255.255.128 172.17.1.1 1
route Inside 10.10.10.0 255.255.255.0 172.17.1.1 1
route Inside 172.17.100.0 255.255.255.0 172.17.1.3 1
route Inside 172.18.1.0 255.255.255.0 172.17.1.1 1
route Inside 192.168.1.0 255.255.255.0 172.17.1.1 1
route Inside 192.168.11.0 255.255.255.0 172.17.1.1 1
route Inside 192.168.30.0 255.255.255.0 172.17.1.1 1
timeout xlate 3:00:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
dynamic-access-policy-record DfltAccessPolicy
aaa-server RedVec protocol ldap
aaa-server RedVec (Inside) host 172.17.1.41
ldap-base-dn DC=adrs1,DC=net
ldap-group-base-dn DC=adrs,DC=net
ldap-scope subtree
ldap-naming-attribute sAMAccountName
ldap-login-password *****
ldap-login-dn CN=Hanna\, Roger,OU=Humans,OU=WPLAdministrator,DC=adrs1,DC=net
server-type microsoft
aaa authentication ssh console LOCAL
http server enable
http 192.168.1.0 255.255.255.0 management
http 172.17.1.0 255.255.255.0 Inside
http 24.32.208.223 255.255.255.255 Outside
snmp-server host Inside 172.17.1.52 community *****
snmp-server location Server Room 3010
snmp-server contact Roger Hanna
snmp-server community *****
snmp-server enable traps snmp authentication linkup linkdown coldstart warmstart
crypto ipsec ikev1 transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
crypto ipsec ikev1 transform-set ESP-DES-SHA esp-des esp-sha-hmac
crypto ipsec ikev1 transform-set ESP-DES-MD5 esp-des esp-md5-hmac
crypto ipsec ikev1 transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
crypto ipsec ikev1 transform-set ESP-3DES-MD5 esp-3des esp-md5-hmac
crypto ipsec ikev1 transform-set ESP-AES-256-SHA esp-aes-256 esp-sha-hmac
crypto ipsec ikev1 transform-set ESP-AES-128-SHA esp-aes esp-sha-hmac
crypto ipsec ikev1 transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
crypto ipsec ikev1 transform-set ESP-AES-128-MD5 esp-aes esp-md5-hmac
crypto ipsec ikev1 transform-set ESP-3DES-SHA esp-3des esp-sha-hmac
crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 set ikev1 transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA ESP-3DES-MD5 ESP-DES-SHA ESP-DES-MD5
crypto map Outside_map 65535 ipsec-isakmp dynamic SYSTEM_DEFAULT_CRYPTO_MAP
crypto map Outside_map interface Outside
crypto ikev1 enable Outside
crypto ikev1 policy 10
authentication pre-share
encryption 3des
hash sha
group 2
lifetime 86400
crypto ikev1 policy 30
authentication crack
encryption 3des
hash sha
group 2
lifetime 86400
telnet 172.17.1.0 255.255.255.0 Inside
telnet timeout 5
ssh 172.17.1.0 255.255.255.0 Inside
ssh timeout 5
console timeout 0
dhcpd address 172.17.1.100-172.17.1.200 Inside
dhcpd dns 172.17.1.41 172.17.1.42 interface Inside
dhcpd lease 100000 interface Inside
dhcpd domain adrs1.net interface Inside
threat-detection basic-threat
threat-detection statistics
threat-detection statistics tcp-intercept rate-interval 30 burst-rate 400 average-rate 200
webvpn
group-policy RedV internal
group-policy RedV attributes
wins-server value 172.17.1.41
dns-server value 172.17.1.41 172.17.1.42
vpn-tunnel-protocol ikev1
default-domain value ADRS1.NET
group-policy RedV_1 internal
group-policy RedV_1 attributes
wins-server value 172.17.1.41
dns-server value 172.17.1.41 172.17.1.42
vpn-tunnel-protocol ikev1
split-tunnel-policy tunnelspecified
default-domain value adrs1.net
username rparker password FnbvAdOZxk4r40E5 encrypted privilege 15
username rparker attributes
vpn-group-policy RedV
username mhale password 2reWKpsLC5em3o1P encrypted privilege 0
username mhale attributes
vpn-group-policy RedV
username dcoletto password g53yRiEqpcYkSyYS encrypted privilege 0
username dcoletto attributes
vpn-group-policy RedV
username rhanna password Pd3E3vqnGmV84Ds2 encrypted privilege 15
username rhanna attributes
vpn-group-policy RedV
tunnel-group RedV type remote-access
tunnel-group RedV general-attributes
address-pool VPN2
authentication-server-group RedVec
default-group-policy RedV
tunnel-group RedV ipsec-attributes
ikev1 pre-shared-key *****
class-map global-class
match access-list global_mpc
class-map inspection_default
match default-inspection-traffic
policy-map type inspect dns preset_dns_map
parameters
message-length maximum client auto
message-length maximum 512
policy-map global_policy
class inspection_default
inspect dns preset_dns_map
inspect ftp
inspect h323 h225
inspect h323 ras
inspect rsh
inspect rtsp
inspect esmtp
inspect sqlnet
inspect skinny
inspect sunrpc
inspect xdmcp
inspect sip
inspect netbios
inspect tftp
inspect ip-options
inspect icmp
class global-class
flow-export event-type all destination 172.17.1.52
service-policy global_policy global
prompt hostname context
call-home
profile CiscoTAC-1
no active
destination address http https://tools.cisco.com/its/service/oddce/services/DDCEService
destination address email [email protected]
destination transport-method http
subscribe-to-alert-group diagnostic
subscribe-to-alert-group environment
subscribe-to-alert-group inventory periodic monthly
subscribe-to-alert-group configuration periodic monthly
subscribe-to-alert-group telemetry periodic daily
hpm topN enable
Cryptochecksum:202ad58ba009fb24cbd119ed6d7237a9Hi Roger,
I bet you already checked it, but does the MPLS end router has route to VPN client subnet 172.17.200.x (or default) pointing to core rtr)?
Also, if the MPLS link has any /30 subnet assigned, you may need to include that as well in Object group LAN-NETWORKS.
Thx
MS -
Problem with MS Access Files and executable files migrateds
Hi all.
We are migrating an old Netware 6.0 server to new SLES 10 SP3 with OES 2 SP2a. I already migrated one volume and in this weekend well migrate the last, and most important, volume to new OES 2 server.
The problem is about some MS Access databases that are very very used for all users and some executable applications that was writed using fisical path like \\OLDSERVER\VOL\PATH\APP.EXE or some links to libraries, databases, images, etc.
The old NW 6.0 server will be removed from the tree in 2 or 3 weeks and in this time the two servers will co-exists. I want to know if it is possible redirect NCP requests to OLDSERVER to NEWSERVER without users rewrite all of MS Access and executable applications. Is it possible?
Tks
Alan Cota.AlanCota wrote:
>
> Hi all.
>
> We are migrating an old Netware 6.0 server to new SLES 10 SP3 with OES
> 2 SP2a. I already migrated one volume and in this weekend we´ll migrate
> the last, and most important, volume to new OES 2 server.
>
> The problem is about some MS Access databases that are very very used
> for all users and some executable applications that was writed using
> fisical path like \\OLDSERVER\VOL\PATH\APP.EXE or some links to
> libraries, databases, images, etc.
>
> The old NW 6.0 server will be removed from the tree in 2 or 3 weeks and
> in this time the two servers will co-exists. I want to know if it is
> possible redirect NCP requests to OLDSERVER to NEWSERVER without users
> rewrite all of MS Access and executable applications. Is it possible?
>
> Tks
>
> Alan Cota.
>
>
Have you considered trying to use a dns alias to it. I have not tested with
MS access specifically but many other apps it works perfectly for. This is
how I get around those issues. Of course your issue is that you still
havethe existing server in the tree. How much will there still be on the
old server. You could rename the old nw server and than update its info in
dns to resolve this. -
Problem with Dynamically accessing EJB Class objects in WL 7.0 SP1
I am trying to build a component which has the ability to instantiate and execute
an known EJB method on the fly.
I have managed to build the component but when I try and execute it I get a ClassNotFoundException.
I know that the EJB I am trying to invoke is deployed and available on the server,
as I can see it in the console, I also seen to have been able to get the remote
interface of the object, my problem occurs when I try and access the class object
so I can perform a create on the object and then execute my method
The code I have written is below:
private Object getRemoteObject(Context pCtx, String pJNDIName, String pHomeBean)
throws Exception {
String homeCreate = "create";
Class []homeCreateParam = { };
Object []homeCreateParamValues = {};
try {
//This call seems to work and doesn't throw an exception
Object home = pCtx.lookup(pJNDIName);
//However this call throws a java.lang.ClassNotFoundException
Class homeBean = Class.forName(pHomeBean);
Method homeCreateMethod = homeBean.getMethod(homeCreate,homeCreateParam);
return homeCreateMethod.invoke(home, homeCreateParamValues);
} catch (NamingException ne) {
logStandardErrorMessage("The client was unable to lookup the EJBHome.
Please make sure ");
logStandardErrorMessage("that you have deployed the ejb with the JNDI
name "+pJNDIName+" on the WebLogic server ");
throw ne;
} catch (Exception e) {
logStandardErrorMessage(e.toString());
throw e;
Any advice would be really appreciated, I'm fast running out of ideas, I suspect
it has something to do with the class loader but I'm not sure how to resolve it
Regards
Jo CorlessHello Joanne,
Congratulations! I'm very happy that you've managed to fix your problem. It's
always essential to understand how to package applications when deploying on BEA
WebLogic. Usually, by throwing everything into an EAR file solves just about all
the class loader problems. :-) Let us know if you have any further problems that
we can assist you with.
Best regards,
Ryan LeCompte
[email protected]
http://www.louisiana.edu/~rml7669
"Joanne Corless" <[email protected]> wrote:
>
>
I've fixed it!!!!!!!!
Thanks to everyone who gave me help!!!!
The class loader was the culprit which is what I suspected all along.
As soon
as I put the 2 jar files I was using into an EAR file the problem went
away!!!!!
Thanks again
Jo Corless
"Ryan LeCompte" <[email protected]> wrote:
Hello Joanne,
As Mr. Woollen mentioned, I also believe it's a problem with the class
loader.
You need to be careful how you arrange your EJBs, because WebLogic has
a specific
method in which it loads classes in an EAR, JAR, and WAR file(s). Please
refer
to http://dev2dev.bea.com/articles/musser.jsp for more information about
BEA WebLogic
class loading mechanisms and caveats. Also, try printing out the various
methods
that are available on the object that was returned to you via reflection.
For
example, use the getMethods() method, which returns an array of Method
objects
that you can subsequently cycle through and print out the various method
names.
This way you can discover if the class found/returned to you is indeed
the one
you intend to locate.
Hope this helps,
Ryan LeCompte
[email protected]
http://www.louisiana.edu/~rml7669
Rob Woollen <[email protected]> wrote:
I believe the issue is the home interface class for this EJB is not
available in the class loader which is doing the reflection.
If you do:
getClass().getClassLoader().loadClass(homeInterfaceClassName)
I suspect it will fail. Reflection still requires that the class be
loadable.
-- Rob
Joanne Corless wrote:
Hi Slava,
If I make my code look like you describe below I get a compliationerror telling
me that
home.getMethod() is not recognised (no such method)
If I change it slightly and use
Method homeCreateMethod =
home.getClass().getMethod(homeCreate,homeCreateParam);
The code will compile OK but when executed it still throws a NoSuchMethodException
Any ideas ?
Thanks for your help so far
Regards
Jo Corless
Your code should look like
Object home = pCtx.lookup(pJNDIName);
Method homeCreateMethod =
home.getMethod(homeCreate,homeCreateParam);
return homeCreateMethod.invoke(home, homeCreateParamValues);
Regards,
Slava Imeshev
"Joanne Corless" <[email protected]> wrote in message
news:[email protected]...
Hi Ryan,
I also wanted to mention that if you do a "header search" in this
particular
newsgroup
with the search query as "reflection", you will see many previousmessages
regarding
reflection and EJBs. I believe you could learn a lot from thedifficulties
that
others have faced and solved.I tried that and although there was a number of similar cases noneof them
actually
seem to fix my issue. Thanks for the suggestion though
Are the EJBs that you are trying to access accessible via your
system
classpath?
Try to avoid having them accessible via the main system classpath,and
only bundle
them in your appropriate EJB jar files (contained in an EAR file,for
example).Maybe I should have laid the problem out a little clearer.
I have a number of EJB's bundled up in a JAR file which is hot deployedto
the
server. Within this first JAR file is an EJB (SSB) component that
needs
to
be
able to invoke a known method on another EJB. This second EJB may
or
may
not be
within the first JAR file but it also will be hot deployed.
The component trying to invoke the method on the 2nd EJB has to
be
able to
create
an instance of the 2nd EJB without actually knowing anything bar
a
JNDI
Name which
is passed in at runtime.
I can get as far as doing the
Object home = pCtx.lookup(pJNDIName);
This returned a class with the name
"com.csc.edc.projects.allders.httppostoffice.postman.PostmanBean_mp8qy2_Home
Impl_WLStub"
My problem seems to occur when I try and invoke the create method
Method homeCreate = home.getClass().getMethod("create", new Class[0]);
My code throws a java.lang.NoSuchMethodException at this point so
I
am
unable
to progress to the next step of :
Object bean = homeCreate.invoke(home, null);
So I can return the instantiated bean back to the calling client.
Why am I getting the NoSuchMethodException, is is because I am gettinga
stub
back rather than the home interface and if so how do I get the truehome
interface
from the bean
Thanks in advance
Jo Corless -
Problem with logging in Creative Cloud account
Hi, I have a problem with my Creative Cloud account. It seems like I logged out about a week ago and when I tried to log in again just now I didn't succed as the program said I have logged out of the system. My password is correct, I even changed it, it still does not work. I can log in on the internet though and my subscribtion is paid, I have no idea what to do. Please. Help.
Sign Out When Sign In http://forums.adobe.com/thread/1450581?tstart=0 may help
-and http://helpx.adobe.com/creative-cloud/kb/unable-login-creative-cloud-248.html
-and 'looping' https://forums.adobe.com/thread/1504792 -
Problems with overage charges and making account changes on line
I have quite a bit of history involving my attempts to resolve the problem of catching my account before it goes over the minutes allowed and making the changes on line (to cut down on call volume) to change my account to raise the minutes allowed for that billing cycle. I was given one reason why it didn't work the first time (I didn't print out my confimation proving I made the changes - bit the bullet and paid those charges) and so the second time wanting to avoid the problem from the first time I made sure I printed out my confirmation. The confirmation had an effective date of change of 07/19/2012 the day I was informed I was nearing my allowed minutes. There were only 4 or 5 maximum days left in that billing cycle so I wanted to nip the problem in the bud and make the changes to my account to be made "that" day. My confirmation said the changes were effective 07/19/2012. In plently of time before that billing cycle ended. Again I was told I did something wrong. This time I'm holding my confirmation in my hand even as the person is telling me again I did it wrong. The purpose Verizon wants it's customers to use the available on-line option is to cut down on their call volume. I didn't go to school to get the knowledge apparantly needed to perform these particular tasks in a manner that is acceptable to Verizon. Has anyone else had problems with trying to fix their problems themselves using Verizons "helpfull" on-line choice?
I have an explanation for you by what was meant by "you did it wrong."
When you make a change effective the date you are requesting it and not at the start or end of your billing cycle, your minute usage for that month is pro-rated.
For example, you say you made a change, because you were nearing your allowance limit, on 7/19/2012 and wanted it effective that day with 5 days left in the billing cycle. Lets assume that your allowance is 700 minutes/month and you were at 675 minutes for that month(still under your monthly allowance). If you make a change effective with 5 days left in your billing cycle to the 1400 minute/month allowance, your allowance for the 1st 25 days of your cycle will have been pro-rated to (25/30) * 700 = 583 minutes. This would mean you would have already had an overage of 92 minutes for the 1st 25 days of the month. Additionally, you would have a pro-rated allowance to use the last 5 days of (5/30) * 1400 = 233 minutes. This is how the pro-rating works when you make a change effective during the middle of your billing cycle.
What you need to do next time to avoid these overage charges is to make the change effective at the beginning of your current billing cycle. So if you had made the change on 7/19/2012, but your billing cycle ended on 7/24/2012(5 days later), you should have made the change effective at the beginning of your current billing cycle, or 6/24/2012. This is called backdating the change. In this instance, you would have received a credit on you account for the cost of the 700 minute plan and been charged the full amount for the 1400 minute plan on your next bill, which I believe is a net additional charge of $10 and you would have had the use of 1400 minutes for throughout the entire month. In this example, you would not have had any overage with your 675 minutes during the 1st 25 days of your cycle and would have been able to use 725 minutes over the last 5 days of your billing cycle. This is much better than the overage charge you would receive with 92 overage minutes @ $0.45/minute = $41.40.
I hope this explains it. -
Problem with users accessing sharepoint 2013 site collection
I have an unbeliveable problem..
I have a sp site with several site collections..
I have around 15 users.. Everybody have access to the root site. Two users do not have access to site collections even though they are in EXACTLY same permission groups like other users who can access those site collections!
I tried to delete them from all user groups in SP, then delete their user profiles in Central Administration, and delete them from Active Directory. After that I recreated their profiles in Active directory, readded them to Central Administration, and again
added them to coresponding groups in SharePoint site collections. They again CAN NOT ACCESS site collections.
What should I do.. This is incredible that 5 users with the same user privileges can access site collections, and 2 can not, even though they are all created in the same way..
Regards,
SrdjanHello,
Have you found a solution for this problem? I have the exact same problem with 2 users accessing a site collection (access denied). I found also this row on uls log:
Access Denied. Exception: Attempted to perform an unauthorized operation., StackTrace: at Microsoft.SharePoint.Utilities.SPUtility.HandleAccessDenied(Exception ex) at Microsoft.Office.Project.PWA.PJBaseWebPartPage.OnPreInit(EventArgs
e) at System.Web.UI.Page.PerformPreInit() at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) at System.Web.UI.Page.ProcessRequest(Boolean
includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) at System.Web.UI.Page.ProcessRequest() at System.Web.UI.Page.ProcessRequest(HttpContext context) at System.Web.HttpApplication.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute()
at System.Web.HttpApplication.ExecuteStep(IExecutionSt... 6955b79c-c42c-50fc-84f8-2b68f97002ea
Maybe you are looking for
-
I uninstalled "Rocky Racoon" in Cydia so that I could unjailbreak my iPod Touch, since it was slow and kept freezing. It runs fine, since I deleted all of the packages I installed myself first (to make sure there was no permanent damage). The only pr
-
Why does Apple not want me to know where my files are?
There is one aspect that I find absolutely ridiculous and frustrating on Mac-OS. When I'm in Apple applications, it is impossible to find out where the file I'm working on is. For example, I have multiple files in my system, in different directories,
-
ITunes gets unresponsive when I click on Podcast tab in the device management window.
Hello, I run the iTunes 11.1 on MacOX 10.8.5. iTunes gets unresponsive each time I click on Podcast tab in the device management window. (when my iPhone5 is connected, running iOS7) There was no bug before I upgrade iTunes and iOS. Is this a know bug
-
A question on a build method in a Binary Tree Program
So I'm working on making 20 Questions in java and I'm supposed to make a construct that calls a build method. I'll post my code as I have it so far. The game is supposed to work so that there's an original question and then if the user selects yes, t
-
10.4.11 airport intermittent
MacBook 2 gHz which was running 10.4.10. First applied delta update manually. Airport signal indicator goes to gray every 5 seconds or so and loses connection. Re-booted in 10.4.10 from a clone and airport works perfectly. Tried applying Combo Update