Problems with guides and spacing between pages?

I am trying to get the guides to show on some of the pages but they won't? And as a result the pages have suddenly spaced out stangely. Please see im age below.
Any ideas would be greatly appreciated.

Check the pasteboard setting in your preferences. If it's okay, then export the file to IDML and open that.
Bob

Similar Messages

Problem with exporting and printing from pages to PDF

I have a problem with my Pages
My font will not be embeded in my pdf files.
I have saved as a ps file and in to the destiller and my fonts are missing.
I need to send my file to the print shop but they will not accept my file and i now understand why.
fonts are missing...
Is there a workaround.
I have no problem in Indesign or quark but pages.....
I need help
thanks a zillion

The font is coming from a notation software Sibelius 4 and is namned opus
Hmmm ... Sibelius is a music notation software and notations are marked up in MusicXML. Presumably the font file is an SFNT with TrueType splines, but it is probably not installed in OS X system folders - rather in an internal Sibelius application font folder. So presumably you do not see the font in FontBook and OS X font auditing does not apply to the font.
Sibelius exports EPS files, right? If memory serves, an EPS is still legal even if the font resource is not embedded. And in any case, we know from the behaviour that the font resource is not embedded for some reason. So how do you get Sibelius to put the font resource inside the graphic ... normally there is a button in the EPS export procedure that gives you the option to Embed All Fonts.
You do not seem to get this button, though. Or why else would you not have checked it already and the problem would have gone away already.
The next point in troubleshooting this is that you are not following the path that would let OS X detect that an external font resource is not embedded.
I go from pages-print-printer- acrobat Pro 8-save as Pdf-x
What you are doing here is telling Pages to tell OS X to generate a PostScript program within which is nested your Encapsulated PostScript program with the call to an unresolved external font resource.
So why does Acrobat Pro not detect the unresolved external font resource? Hmm ... did you try the Preflight option in Acrobat 8 Pro? It should provide information on unresolved embeddings.
I have also tried pages-print-printer- acrobat Pro 8 and save pdf as postscript and put the postscript file in destiller 8 pro with defalt setting high quality print
The whole problem with EPS and PS is that this sort of situation is possible in the first place (plus, what is worse, the PS program can include custom additions to the graphics model that then fail in the PS interpreter whence Apple GX normalizing, Adobe Distiller normalizing, and Apple Quartz normalizing). You want to get as far away from EPS and PS as possible, believe me.
So, you have not done what I posted that you should do in the first place. If I were you, I would first get rid of the problem that the EPS is making a call to an external font and then get rid of the problem that the PostScript is preserving the external call.
To get rid of the problem that the EPS is preserving an external call, simply open the EPS in Apple Preview which includes a NORMALIZER for EPS/PS, and then save out the graphic as PDF. Alternatively, if you don't trust Quartz for some reason, set up a hotfolder for Distiller, make sure the option to embed all fonts is enabled, and convert the EPS to PDF.
Now replace your EPS in Pages with PDF in Pages, and don't save PostScript to disk but save PDF to disk through the proper procedure which is File > Print > PDF > Save as PDF/X [for your custom configuration of the PDF/X-3 filter considering that no sane person in North Europe prints lowend US SWOP, we use ISO].
If you begin by telling OS X that you want PDF within which fonts are supposed to be embedded ALWAYS, then you have started the right way. Otherwise, you have not told the operating system what you want to do, and this then leads you into places where you are unlikely to have the expertise to troubleshoot problems.
So, forget placing EPS in the first place, place PDF. And forget saving PostScript to disk, save PDF to disk. If that does not sort your problem, here is the dirty solution for professional prepress.
Adobe Photoshop has an EPS rasterizer that has wide tolerances for poor PostScript programming (so does Adobe Illustrator 6 and higher by the way).
Therefore, if an EPS is posing problems, one workaround is to rasterize the EPS at high resolution in Photoshop and place that high resolution PDF in your layout.
Take care that you rasterize as 1 bit at the required resolution of the print provider, probably 2450 dpi. When you save the 1 bit as PDF, Photoshop automatically compresses to a very, very small file (don't be surprised if 15Mb compresses to something like 0.5Mb).
Rasterizing in Photoshop should not be necessary if you simply start by telling the operating system what it is you are trying to do. Then the operating system should be able to take the right decisions for you, and tell if you if finds problems it cannot resolve without turning to you.
Good luck,
Henrik
would-be technical writer

Three finger or two finger gesture to move back and forward between pages of file only work on safari, unlike with old os. this new lion won't let me do it. Any help?

three finger or two finger gesture to move back and forward between pages of file only work on safari, unlike with old os. this new lion won't let me do it. Any help?

I have decided to dedicate this thread to the wonderful errors of Lion OSX. Each time I find a huge problem with Lion I will make note of it here.
Today I discovered a new treasure of doggie poop in Lion. No Save As......
I repeat. No Save As. In text editor I couldn't save the file with a new extension. I finally accomplished this oh so majorly difficult task (because we all know how difficult it should be to save a file with a new extension) by pressing duplicate and then saving a copy of the file with a new extension. Yet then I had to delete the first copy and send it to trash. And of course then I have to secure empty trash because if I have to do this the rest of my mac's life I will be taking up a quarter of percentage of space with duplicate files. So this is the real reason they got rid of Save As: so that it would garble up some extra GB on the ole hard disk.
So about 20 minutes of my time were wasted while doing my homework and studying for an exam because I had to look up "how to save a file with a new extension in mac Lion" and then wasted time sitting here and ranting on this forum until someone over at Apple wakes up from their OSX-coma.
are you freaking kidding me Apple? I mean REALLY?!!!! who the heck designed this?!!! I want to know. I want his or her name and I want to sit down with them and have a long chat. and then I'd probably splash cold water on their face to wake them up.
I am starting to believe that Apple is Satan.

How do I disable the flipping back and forth between pages with PgUp and PgDn? Please tell me that I can!

As of Firefox 4, it seems to have been decided that PgUp and PgDn are now buttons with which you flip back and forth between pages. To me, this essentially means almost losing valuable information because I actually use those to go up and down pages, so I wonder; How do I disable this new and utterly inconvenient feature?
Please tell me that I can!

In your system details, I see this plug installed: ''Macromedia Shockwave for Director Netscape plug-in, version 8.0''
You also appear to have a later one, though still out of date installed namely, ''Adobe Shockwave for Director Netscape plug-in, version 11.5 ''
First of all, click the orange Firefox button, go to Add-ons, then Plugins and disable the Macromedia version.
Then go to http://get.adobe.com/shockwave/ and update the other one.
If the problem persists afterwards, try running Firefox in [[Safe Mode]]. If it functions properly in that configuration, then one of your add-ons is the culprit.

Haven't been able to use pages for a while. Keep getting following message. Have tried reinstalling iWork, but no luck. Same problems with Keynote and Numbers/Users/scottmcdonald/Desktop/Screen Shot 2012-03-14 at 9.39.52 PM.png

Haven't been able to use pages for a while. Keep getting following message. Have tried reinstalling iWork, but no luck. Same problems with Keynote and Numbers/

Have you moved Pages from its installed location? Or just dragged a copy to your current system?
It can't find some of its resources apparently.
Peter

I just upgraded my iMac to Lion, and a few seconds ago, I upgraded the iWork package and now I'm having some problems with the new version of Pages (4.1) When I try to change something in a document, a message says "the program is not responding"

I just upgraded my iMac to Lion, and a few seconds ago, I upgraded the iWork package and now I'm having some problems with the new version of Pages (4.1) When I try to change something in a document, a message says "the program is not responding", so I have to force it to close. By the way, the SAVE botton stays the same even I change erverything in my document. Please, a have a work to finish, **** me. What I can do abou it?

I just upgraded my iMac to Lion, and a few seconds ago, I upgraded the iWork package and now I'm having some problems with the new version of Pages (4.1) When I try to change something in a document, a message says "the program is not responding", so I have to force it to close. By the way, the SAVE botton stays the same even I change erverything in my document. Please, a have a work to finish, **** me. What I can do abou it?

Problem with Frameset and page session

All,
I am having a problem with Framesets and page session attributes. I
have a client who's application uses a three frame frameset. They
have a requirement on several pages that when a button is pushed two
different pages load into the right and left frames. The way they
are accomplishing this is that on the pages were this is required,
they are adding target="_top" to the form declaration in their JSP.
Then they store the page names they want to display in session,
forward the request to the frameset, the frameset then determines
which pages to display based on the session variables. This works
exactly how they want it to.
Here is our problem. We need to store some information in page
session attributes. We have tried to get a handle to the desired
view bean and call the setPageSessionAttribute method. However,
since we are forwarding to the frame and the frame handles displaying
the desired JSP, that view bean we had the handle to is not the one
that is created to hand the display of the JSP.
The next thing I tried was to use the request object. In the
handleBtnRequest method, I set an attribute in the request object. I
then query the request object in the beginDisplay event of the view
bean. When the frame is reset the request object does not contain
the attribute that I have set. I'm confused by this because I
thought the request object would be available to me throughout the
life of the request.
Given the above information, does anyone have any suggestions? Also,
am I going about this in the wrong manner.
The client had been storing this information in user session, which
seemed to work. However, since the data being stored dealt
specifically with data for the requested page, we felt that storing
it as page session was more appropriate.
Thanks,

The script on your page web page has some obvious bugs.. Best
fix those
first before looking to blame Flash.
Jeckyl

Problem with Edit IN function between LR 2.3 and PS CS3

I recently upgraded my system to a Windows Vista 64 bit Core 2 Quad with 8 GB. Lightroom now works and loads images the way it should. I do have one major concern and need any help possible.
I am using LR 2.3 in 64 bit and PS CS3 ver 10.0.1 (which is 32 bit - loads slowly but otherwise works fine). The problem I am encountering is in LR Develop / Photo / Edit In... - using any of the menu items:
"Edit in Abode Photoshop CS3"
"Open as Smart Object In Photoshop"
"Merge to Panorama in Photoshop"
"Merge to HDR in Photoshop"
"Open as layers in Photoshop"
Photoshop opens but no image(s) are exported and I receive the message in LR - "The file could not be edited because Adobe Photoshop CS3 could not be launched."
Photoshop, however, was launched but no image exported and so I can't work on the image in PS. The appropriate TIFF image is created in LR for the first two menu items - nothing for the last three menu items.
I can create a partial work around by setting PS as an external editor, however, I can't use 4 of 5 of the menu items.
All the menu items work fine in Windows XPpro.
Any help is much appreciated.
PS I also tried the most recent Window 7 RC with exactly the same results.
Thanks
Bob

Don
I wasn't shouting - I just cut and paste the exact text and font in its original size and type as was shown in the message. Never had a thought that someone would be offended by cutting and pasting exactly what was in a message - it would appear that John Williams saw it for what it was.
However, sorry if I offended you.
Bob
Date: Mon, 1 Jun 2009 19:15:15 -0600
From: [email protected]
To: [email protected]
Subject: Problem with Edit IN function between LR 2.3 and PS CS3
There is no reason to shout. There are only other users here trying to help.
>

Whatsnew page for 3.6.17 has formatting problems with Firefox and I.E.

I just updated from 3.6.16 to 3.6.17n and the whatsnew page, displayed after Firefox restarted, has formatting problems in the lower right hand corner.
I checked it with I.E. 8 and it also shows the formatting problem.
Why wasn't this caught before the page was put into "production"?
The URL is http://www.mozilla.com/en-US/firefox/3.6.17/whatsnew/
There is a line with the text "Release Notes » Firefox Features » Firefox Help »" that is being displayed on top of other material.
I wonder what a new Firefox user or an inexperienced user would think of this? They might think that they did something wrong or, worse, they might consider Firefox had problems and they won't use it.
This reflects badly on Firefox.
One more thing, could someone make this textarea taller and wider. It is so small as to cause problems typing and proofing the material.
The URL is https://support.mozilla.com/en-US/questions/new?product=desktop&category=d6&search=whatsnew+page+for+3.6.17+has+formatting+problems+with+Firefox+and+I.E.&showform=1
How about upping the cols and rows values? They are currently rows="10" cols="40"

As you have a Power Mac you also have a alternative option to consider which is a third-party build from http://tenfourfox.blogspot.com/2011/08/601-now-available.html

Problems with Apex4.2, SkillBuilders Modal Page plugin, IE9 and HTML5 theme

Hello everyone.
Please Help.
Again problems with Apex4.2, SkillBuilders Modal Page plugin, IE9 and HTML5 theme (Blue Respensive).
1. The problem is that all the popup windows display 100% of the width
2. After opens a popup window change the width of the parent window forms.
This happens only in IE9 browser.
In other browsers, the popup window only much larger than the form that is opened.
I can not change the size of the window.
Thanks.

Milk,
I changed the component level settings to use a fixed height and width (I adjusted edit, you still need to adjust create). You can try adjusting this some because the modal page should adjust a bit.
Then I added this CSS to the Inline CSS of the modal page:
section.uMessageRegion{position: static; !important;}
Let me know how this works for you.
Regards,
Dan
blog: http://DanielMcghan.us/
work: http://SkillBuilders.com/APEX/

Problem with jsessionid and relative paths

I'm having an issue with jsessionid in a J2EE application running on an all Oracle platform (Oracle DB, 9ias, etc.). Most of the time sessions are tracked with cookies, but occasionally the jsessionid appears on the URL (on first login with a new browser window I think?).
Anyway, sometimes the session id is very large (100 chars +) and includes special characters, specifically a backslash. This is causing problems with relative paths in the page.
Is this normal behavior or is there a problem with my app server/JVM setup? Has anyone else seen this? Thanks for any advice.

Hi Stefan,
 The issue was logged as CR238704. You can either contact [email protected] or
 just pass me your email Id and I'll send the patch to you.
 -- Nagesh
 <Stefan Krause> wrote in message news:[email protected]..
 > The problem I have is that the application is very old and at the same
 > time very big (so we're doing the transition step by step) and there are
 > lots of variables (and even methods in JSP pages - no comment) shared
 > between the JSP pages!
 > So for us jsp:include isn't an option...
 >
 > Is there a way to report bugs when you've got only the free development
 > license?

After Migrating from 10g to 11g Geeting problems with Guided navigations.

After Migrating from 10g to 11g Geeting problems with Guided navigations and section navigations not working.
And we are getting the following error <<odbc driver returned an error (SQLExecDirectW)>> where we have used navigations.
In 10G we have Guided navigation Reports to display the Reports links and intermediate reports for conditionally displaying the Dashboard section(Reports) but after migrating to 11g Guided navigation reports and conditional reports are not working..
We know that in 11g section navigation replaced with conditions and Guided navigation replaced with action link.. but
do we need to recreate those reports in actions and condition or is there any work around avoid reworking.

Hi Both,
Thanks for the reply ...
For Guided navigation we are getting like below error:
Odbc driver returned an error (SQLExecDirectW).
For Conditional dashboard section we are getting like below error:
"saw.aViewsToRefresh = [];saw.aViewsToRefresh['d:dashboard~p:1egt6il5utl0uu8n~s:3jsmgfs3c1r4tn7c~n:condition'] = true;saw.aViewsToRefresh['d:dashboard~p:1egt6il5utl0uu8n~s:nos5q43jvjmi643b~n:condition'] = true;"

Problem with Send and Receive Emal In SAP System

Hi gurus!
I have a following quote:
Dear !
I have a problem with send and receive email in SAP system following :
I want to test send and receive email in local network at my company. I
had two server
Server 1 : I setup Exchange Mail Server 2007 with domain controller is
fes.com
Server 2 : I setup SAP ERP ECC 6.0
On Server 1 : I created 2 account ( u1Afes.com and u2Afes.com ) and then I tested send and receive email between u1 and u2 in local network through Microsoft Outlook 2007 -> OK
and then
On Server 2: I had configured send and receive email on SAP system
through tcode SBWP, SCOT and SOST as Note 455140 - "Configuration of
e-mail, fax, paging or SMS using SMTP"
for example :
I logged in SAP system with user Basis01 (with email u1Afes.com ) -> then,using tcode SBWP -> new message -> send to u2Afes.com with Internet Mail type and then status message with green light -> sending ok
and then I have used Microsoft Outlook 2007, I logged with account u2 ->check email -> Ok. I saw message which send from u1
Finally, My problem is how can receive mail in SAP system without using Microsoft Outlook
For example:
Login system SAP with Basis01 account (with u1Afes.com ) -> tcode SBWP ->New Message -> send to u2Afes.com
and then
Login system SAP with Basis02 account (with u2Afes.com ) -> tcode ??? ->
To receive email from Basis01 (with u1Afes.com )
Please help me now
Thanks
I replace "@" with "A" because of banning email of this forum.
This quote is about sending email in local network. And we can't receive any email from the outside email address. Addition if I wanna send email to internal email in Internet (we've just tried with email address in local network) What should I config in SAP and Exchange ?
By the way, Is SAP Server IP added to Relay Agent for sending or receiving mail ?
Regards
An NLP
Edited by: An NLP on Apr 6, 2010 7:03 PM

Hi,
This problem is a classic problem of mail routing via Exchange. Exchange like most mail servers use the domain part of the email address as a means to route mails. So I will make an assumption that your main company mail addrss is "User @ fes.com".
So when you send a mail to the "User @ fes.com mail" address the mail is delivered to your Outlook mail address as this is the default route for company.
(Q) So how do you get your Exchange server to relay the mail into the sending SAP system?
(A) The easiest way would be to setup and unique mail domain for your SAP system. I always recommend "user @ client.sid.company.com" which in your case would be "u1 @ 100.PRD.fes.com". You can then instruct Exchange to send any emails addressed to 100.PRD.fes.com domain to your SAP system. Also using this format of address you can configure multiple mail connections into multiple SAP systems.
(A) Another answer would be to enter the "Full" email address (LOcal and Domain part of address) into the routing rule for Exchange e.g. "U1 @ fes.com" so that all emails addressed to this user will be delivered into SAP. However this method requires a lot of Admin as you will have to update Exchange with ALL email address that need to receive emails. Also if your corporate mail address is "U1 @ fes.com" then all mails will be forwarded to SAP.
I would definitely NOT recommend this method but the decision is up to you.
P.S. The IP address of the SAP system is entered into the mail header of the email. This is standard practice in SMTP relay. You can suppress this header in Exchange
Hope this helps
Michael

Problem with dreamweaver and Flash

Hi, maybe someone can help me, i have any problem with
dreamweaver and flash, i have a page and i have a menu and
sub-menu, and the same page i have a category en flash 550 x 700 (
photography and more... ) but when the menu to unfold
the menu to see under flash and it cant see ( sorry my
english is bad.... i hope you can understand me, and help me.. )
i dont now why always flash ever stay up, or first, and
another information under flash... this a problem... if you have
menus...
thanks.... have nice day.....

This is a drawback of using flash or any other active
content. By default, all active content including flash will
display over every other content and thats why your menu stays
under the flash movie. Some people make the flash background
transparent to show content under the flash movie, but that will
not work for menu items.
I would suggest that you make the menu such that it does not
overlap with the flash movie.

Problem with JTextPane and StateInvariantError

Hi. I am having a problem with JTextPanes and changing only certain text to bold. I am writing a chat program and would like to allow users to make certain text in their entries bold. The best way I can think of to do this is to add and tags to the beginning and end of any text that is to be bold. When the other client receives the message, the program will take out all of the and tags and display any text between them as bold (or italic with and ). I've searched the forums a lot and figured out several ways to make the text bold, and several ways to determine which text is bold before sending the text, but none that work together. Currently, I add the bold tags with this code: (note: messageDoc is a StyledDocument and messageText is a JTextPane)
public String getMessageText() {
 String text = null;
 boolean bold = false, italic = false;
 for (int i = 0; i < messageDoc.getLength(); i++) {
 messageText.setCaretPosition(i);
 if (StyleConstants.isBold(messageDoc.getCharacterElement(i).getAttributes()) && !bold) {
 bold = true;
 if (text != null) {
 text = text + "";
 else {
 text = "";
 else if (StyleConstants.isBold(messageDoc.getCharacterElement(i).getAttributes()) && bold) {
 // Do nothing
 else if (!StyleConstants.isBold(messageDoc.getCharacterElement(i).getAttributes()) && bold) {
 bold = false;
 if (text != null) {
 text = text + "";
 else {
 text = "";
 try {
 if (text != null) {
 text = text + messageDoc.getText(i,1);
 else {
 text = messageDoc.getText(i, 1);
 catch (BadLocationException e) {
 System.out.println("An error occurred while getting the text from the message document");
 e.printStackTrace();
 return text;
 } // end getMessageText()When the message is sent to the other client, the program searches through the received message and changes the text between the bold tags to bold. This seems as if it should work, but as soon as I click on the bold button, I get a StateInvariantError. The code for my button is:
public void actionPerformed(ActionEvent evt) {
 if (evt.getSource() == bold) {
 MutableAttributeSet bold = new SimpleAttributeSet();
 StyleConstants.setBold(bold, true);
 messageText.getStyledDocument().setCharacterAttributes(messageText.getSelectionStart(), messageText.getSelectionStart() - messageText.getSelectionEnd() - 1, bold, false);
 } //end actionPerformed()Can anyone help me to figure out why this error is being thrown? I have searched for a while to figure out this way of doing what I'm trying to do and I've found out that a StateInvariantError has been reported as a bug in several different circumstances but not in relation to this. Or, if there is a better way to add and check the style of the text that would be great as well. Any help is much appreciated, thanks in advance.

Swing related questions should be posted in the Swing forum.
Can't tell from you code what the problem is because I don't know the context of how each method is invoked. But it would seem like you are trying to query the data in the Document while the Document is being updated. Try wrapping the getMessageText() method is a SwingUtilities.invokeLater().
There is no need to write custom code for a Bold Action you can just use:
JButton bold = new JButton( new StyledEditorKit.BoldAction() );Also your code to build the text String is not very efficient. You should not be using string concatenation to append text to the string. You should be using a StringBuffer or StringBuilder.

Problems with guides and spacing between pages?

Similar Messages

Maybe you are looking for