Problems with HDMI sound for Pavilion dv5 1192

Hi
When I connect the laptop to the TV no sound get out. I put HDMI sound as standard but still nothing. I don't know if it's something wrong with the driver for the sound. Please advise.
Best regards

It's likely that the laptop's attempting to output audio through the HDMI as well. Have you tried this? Right-click on the speaker icon in the notification area near the clock (in Desktop mode) and select "Playback devices." What's listed there, and what has the green check mark? Try selecting your speakers and clicking "Set Default."
- Peter

Similar Messages

  • Problems with HDMI Sound (Special case)

    My problem is that when I connect my Macbook Pro to the TV through HDMI the sound will only come out through the actual TV and not to the audio system that goes with it like I would like.
    When I connect  my boyfriends Windows laptop (in the same exact way) the problem is solved, the audio comes out through the sound sistem bar and not the crappy TV integrated speakers.
    I hope I made my point clear. I can make the sound come out from the macbook but it goes to the tv and not the sound system attached bar. When my macbook is connected the audio bar switches of automatically. The tv is a Sony Bravia and the Bar is also a Sony (attached to the tv through HDMI).
    Thanks and I hope you can help me!

    It's likely that the laptop's attempting to output audio through the HDMI as well. Have you tried this? Right-click on the speaker icon in the notification area near the clock (in Desktop mode) and select "Playback devices." What's listed there, and what has the green check mark? Try selecting your speakers and clicking "Set Default."
    - Peter

  • Having a problem with the sound for purchased movies is skipping like a scratched CD

    Every time I got to play a movie of Television show the sound keeps skipping like a scratched CD. I've tried redownloading but that doesn't seem to work. I dont know what else to do.

    Thanks for the swift reply, I have been looking online and a loose plug seems to be somewhat of an issue with many, I hope mine is actually a problem and not what others are experiencing. It's taken me this long to even reach out for the simple fact I HATE being a complainer but this is just horrible.
    Do you have an iPad 3 as well? And is yours not experiencing any issues close to mine?
    Thanks again!

  • Having problem with Ipod Sound

    I am having a huge problem with the sound for my Ipod. I was recently at a concert and using my car audio conversion in both my Ipod and my girlfriends, when I unplugged it from hers to mine I lost all sound to my Ipod when I plug in my headphones now or when I put the receiver back into the bottom. I have reset and restored it and run the diagnostics check to see if it could be the USB or the headphone Jack. Both are in working order but I am still not getting any sound to my Ipod. Can anyone help me with this problem? My Ipod is my life staple for my morning commuet.

    You can try to following to rule out/fix a software problem:
    - Reset. Nothing will be lost
    Reset iPod touch:  Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Restore from backup
    - Restore to factory defaults/new iPod
    If still a problem you very likely have a hardware problem and an appointment at the Genius Bar of an Apple store is in order.

  • I still have a warranty but it will be out in a week. i previously have a sound distortion problem with my mac for months and suddenly it just fix itself. what should i do? i'm worried that it will comeback and i dont have a warranty anymore.

    i still have a warranty but it will be out in a week. i previously have a sound distortion problem with my mac for months and suddenly it just fix itself. what should i do? i'm worried that it will comeback and i dont have a warranty anymore.

    JoBautista,
    you still have the option (before your warranty expires) of purchasing an AppleCare Protection Plan, which will provide an additional two years of coverage. Once your warranty expires, you will no longer have the option of purchasing AppleCare.

  • PROBLEM WITH MY SOUND CARD .......H.P IS REALLY NOT GOOD.....!

    I PURCHASE HP PAVILION DM4 2000 SX ONLY 2 WEEK AGO AND I HAVE PROBLEM WITH MY SOUND CARD WHEN I REMOVE HAND FREE THIS MACHINE QUITE AND AGAIN PLAY VIDEO SONG ETC THAN COME SOUND ....!
    ANY 1 HAVE IDEA WHAT PROB WITH THIS....!

    Did you download and install the latest Realtek Audio drivers from the Realtek site?
    http://www.realtek.com.tw/downloads/downloadsView.​aspx?Langid=1&PNid=24&PFid=24&Level=4&Conn=3&DownT​...
    Accept the agreement. Download and install the first or second driver on the list depending on whether you installed W7 32 or 64 bit.
    If that doesn't work, I don't have any other suggestions for you to try.
    Paul

  • Problems with the sound in Windows

    Hey everybody, hoping someone can help.
    I'm working with Cubase in Windows with my mac and i have problems with the sound, but not all the time.
    I have an M-Audio card connected and while i'm playing something in Cubase, the sound makes a digital distortion just for 10 seconds, and then again sounds perfect and then again comes back the digital crash, somekind of loop. So i was thinking that maybe was a problem with the drivers of my M-Audio card, but then i was playing a song in Winnamp with the built-in speakers and happens exactly the same, so i think it's a problem with the Mac drivers for Windows, i use the same audio card in MacOsX and i don't have problems
    I have tried various display settings. I have no idea if this is just me or a common problem.
    Thanks in advance...
    MacBook Pro 2.16 GHz Intel Core 2 Duo   Mac OS X (10.4.8)  

    This is not a BOOT CAMP Problem. It is a WINDOWS XP Problem. Either he didn't install the drivers for the sound card. (Which is Realtek High Definition Audio) or the Windows XP audio driver (WNMM) is corrupt.
    Go to Device manager and under Sound, Video and Game controllers you should see a little yellow question mark under the WNMM driver. If this is the case he needs to uninstall the driver and reboot. It will then reinstall itself and should work properly after that.
    MAC PRO   Mac OS X (10.4.9)  

  • HELP HELP HELP with adminstrator password for pavilion dv7 beats audio

    Hi. I need help with  adminstrator password for pavilion dv7 with window 7. I don't remember with is the  adminstrator password for pavilion dv7 beats audio. Is there anyway you can help me with this? once i enter 3 times is gives me this system disabled code: 52464663.  

    Hi
    Try this Key : 43542265 That should fix your issue 
    Hope this helps.
    ***** Click the KUDOS Thumbs UP (Like) on the left to say 'Thanks'*****
    ****Make it easier for other people to find solutions, by marking my answer “Accept as Solution”&"Kudos"if it solves your problem.****
    -VJ
    Although I am an HP Employee, I am speaking for myself and not for HP.

  • HT1657 Hi, I rented a movie off iTunes but the there is no sound. I've bought and rented previous movies and I've never had any problems with the sound before. Is this some kind of glitch? How can I get my money back?

    Hi, I rented a movie off iTunes but the there is no sound. I've bought and rented previous movies and I've never had any problems with the sound before. Is this some kind of glitch? How can I get my money back?

    Hey grossa2,
    First, here is a way to report an issue with your purchase:
    How to report an issue with your iTunes Store, App Store, Mac App Store, or iBooks Store purchase
    http://support.apple.com/kb/HT1933
    Then, I'd go through this article, which helps troubleshoot a lack of audio playback in iTunes:
    iTunes and QuickTime for Windows: Audio does not play or plays incorrectly
    http://support.apple.com/kb/TS1362
    Take care,
    Delgadoh

  • Problems with microphone sound in iChat

    Hello Ralph,
    (I already thought I sent this but I didn't see it as a new topic, so I am trying again). I'm new to this discussion thing, it's my first time so I hope I've submitted this correctly.
    I have similar, but extended and more complicated problems with "microphone sound in iChat". (Sorry, this email is a bit lenghty becuase I have already done a lot of my homework on trouble shooting this.)
    I began by using iChat with a high impedance microphone (from an old 1970'scassette player) PLUGGED DIERCTLY IN THE THE MICROPHONE INPUT on the back of my G4 tower. (I DO NOT have a video camera). My Mom in Canada can hear me okay on it, only if I "eat" the microphone. (My Mom DOES have a video camera).
    SO I BOUGHT AN iMic. I also bought a new condenser mic to go with my new iMic. I plugged iMic in and adjusted the sound preferences selection. I switched the iMic to "Mic". It did not work. The old cassette mic did not work at all with iMic either. My Mom could not hear me, and my "VU METER bar levels" on my iChat were not registering. (If I plug the condenser mic directly into the tower, Mom can hear me only if I "eat" the condenser microphone).
    Next, with iMic, I wanted to try my Shure 58 microphone instead. My friend (who is an audio tech) made me a 1/8" to XLR (sheilded) cable. I made sure I had adjusted the sound preferences and switched the iMic to "Mic". The Shure 58 did not work with iMic. It also did not work plugging directly into the tower.
    Next, with iMic, I wanted to try my "Plantronics telephone headset". My friend (the audio tech) then made me a 1/8"male to 1/8"mini feamle (sheilded) cable. My headset did not work with iMic. It also did not work plugging directly into the tower.
    My friend, the audio tech, then made me second cable 1/8"male to 1/8"female (sheilded) cable. This cable I had him make 50 feet long so I could move to other areas in my home while audio chatting - so I don't have to be trapped in my office while talking. We ran the cable from iMic to the Old cassette mic and the new condenser mic. They did not work with iMic.
    We also tried plugging the new 50ft cable directly into the back of the G4 Tower and it worked with the old cassette mic and the new condenser mic, BUT the volume was reduced and there was a loud baseball game being broadcast through the cable - according to my Mom. I could not hear anything from my end - not my own voice and not the baseball game! IS THERE A WAY FOR ME TO MONITOR (actually hear) THE SOUND THAT SHOULD BE COMING THROUGH THE MIC?
    I have tried to trouble shoot these issues on line, but can't seem to find the right solutions. In one of your discussions I read that you suggested to select the iChat preference for Video and select microphone. I CANNOT SEE THE FULL WINDOW UNDER iChat Video Preferences!!!! All I can see is the top half of a large empty box that says "There is no camera attached to this computer". (That's because I have no camera, but I DO HAVE a microphone).
    I also found some support about adjusting microphone levels using iMovie. I do not have iMovie on my Mac.
    Yes, I have already adjusted the AUDIO MIDI SETUP settings.
    My audio tech friend and I are both baffled. iMic is useless to me so far - perhaps you can help to get me up and chatting properly? Do I really need iMovie and/or a video camera to fix this???
    BY THE WAY: When I plug my external speakers into iMic and select iMic in preferences for output, my speakers and sound is very inferior to the using the speaker terminal on my tower. i Mic is supposed to better???????
    Thanking you for your help in advance,
    Marlene
    (Please could you, would you, email a copy of your answer to me at [email protected])
    G4, 450Mhz   Mac OS X (10.4.6)  
    G4, 450Mhz   Mac OS X (10.4.6)  
    G4, 450Mhz   Mac OS X (10.4.6)  

    Hi Ralph,
    A funny thing just happened...
    The iChat prefernce window for "VIDEO" finally opened (!!) all the way, so for the FIRST TIME EVER and I was able to see the microphone setting at the bottom of the window. (Because I have NO CAMERA, the window would never fully open before during the 100 or so times I tried to get it to open before. This must've been a fluke because now it won't fully open again).
    While it was open I set the microphone setting to iMic, plugged my condenser mic into iMic and IT WORKED. Then I tried the long (baseball game) extension cord in the iMic (attached to the condenser mic) and IT WORKED TOO - with NO BASEBALL GAME!
    I still have to have the condenser mic right up to my mouth, which shouldn't be - but considering I have spent a few weeks trying to troubleshoot this, "eating the mic" is only a minor annoyance at this point.
    I just plugged my speakers into iMic and THEY WORK GREAT!
    SO ALL MY PROBLEMS WERE BECAUSE: I could not set the microphone under Video in iChat preferences because the VIDEO PREFERENCE WINDOW DOES NOT FULLY OPEN WITHOUT A CAMERA ATTACHED. If it hadn't opened by fluke my iMic would still not be working.
    I guess I'm all set now. Unless you have a suggestion why the condenser mic isn't picking up my voice from other than right by my mouth? It should be able to be a foot or two away at least.
    Thanks Ralph,
    Marlene
    (By the way, I never did trash the com.apple.ichat.plist)
    G4, 450Mhz   Mac OS X (10.4.6)  

  • Problem with the sound card

    Hello everyone,
    So here for 2-3 days, the sound of my Macbook starts beuguer (buy in October 2014). So when starting the mac when I listen to music all goes well, I can adjust the sound using the keys on my keyboard, and when I ca defois support appears to me that the sound is cut off, I think it 'is a problem with the sound card. But as soon as I plug in headphones, not set I have to go through the system preferences. By unplugging the problem remains the same on his fate, but impossible to resolve through the keyboard. I tried to put the volume icon on the top bar but even by setting it does not work here. The problem resolves itself after 30 minutes-1 hour. It's very annoying. Thank you in advance for your answers.

    Hi, Dolve
    This could be either hardware or software, so let's start with trying to get all drivers and software up to date. This page has updates for all your system. I would recommend getting at least your latest audio driver and BIOS downloaded. Following the installation, try using your sound again and see if the issue still persists.
    Best,
    Adam
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution!" This will help the rest of the community with similar issues identify the verified solution and benefit from it.

  • My sleep/wake button is now not working and than I faced problems with my sound, now my iphone speakers aren't working? What shall I do?

    My sleep/wake button is now not working and than I faced problems with my sound, now my iphone speakers aren't working? What shall I do?

    The problem isn't solved after the restore, shall I bring my phone to the AppStore? Will they give me a new one? Or I should pay for that. Warranty is until December 2013;)

  • Not event 6 month i already got a problem with the sound and i cannot watch youtube or any video using my Ipad

    Not event 6 month i already got a problem with the sound and i cannot watch youtube or any video using my Ipad. Please help

    Reset iPad
    Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
    Note: Data will not be affected.

  • Problem with skype sound on headset

    Hi. I have a problem with skype sound on my headset, when im talking to my friend I can hear him on my headset while the rest of the sound is on my speakers. How do i change that so i could hear all sounds on my headset? 
    Solved!
    Go to Solution.

    Hi rajababu3455, Can you please reproduce the issue and provide logs as described in this link https://support.skype.com/en/faq/FA12321/how-do-i-​create-log-files under Skype for Windows Desktop and attach it to your post?
    This will help us investigate and solve the problem you are experiencing.
    Thank you

  • I have been a loyal customer for years and have a hot spot because internet options are very limited in our rural area.  I have stayed with 10G since the beginning.  Most months I don't use the 10G.  Verizon has no problem with me paying for Data I don't

    I have been a loyal customer for years and have a hot spot because internet options are very limited in our rural area.  I have stayed with 10G since the beginning.  Most months I don't use the 10G.  Verizon has no problem with me paying for Data I don't use.  This month my daughter comes home from College and she accidentally uses 24G.....14 over get blind sided with $140.00 in overages.  I called Verizon today......stopped in to the store today......My neighbor told me they waved charges for her one time.  Lots of charges.....But I'm am getting no help.  Not even an offer of a payment plan to help me out.  I went back just 6 months and I have over paid for 19G.....Seems like they would like to help out their loyal customers!!!!     Does anybody have any suggestions on how to deal with them?   We are not wealthy....or I would just pay this and walk away......

    There is a big misconception in what customers believe a cell carrier is obligated to do.
    You pay a set price to use up to that amount of xx data. It makes no difference if you use it to the paid limit or way under. Its like peace of mind when you don't have to worry about a data counter.
    Your daughter used the data, your plan is quite clear of what overage charges are. Why should or would Verizon wireless just forgive the charges because you are a customer? Your daughter used the data, get the money from her. That is the responsible thing to do.
    There is no "I have been a loyal customer so please remove the $120, or $250, or $2,000.00 since I did not mean to use it"
    Your electric company, or gas company or any other company does not remove valid charges. Why should Verizon wireless?
    Just pay the invoice and don't think you are being mistreated because Verizon is a business and not a charity.
    Good Luck

Maybe you are looking for

  • How do i share itunes on all my devices?

    I have an ipod touch and I got some itunes credits loaded there and so is my ipad, now i got an iphone and i wanted to buy something using that itunes credits, what can i do to use that?

  • Share cinema display between Mac Mini and MacBook Pro

    Hello - I am keen to get an LED cinema display to use on my new MacBook Pro - but I share my study with my children - so want to give them a MacMini to use. How easy is it two swap between the MacMini and the MacBook Pro ? I guess there is only one i

  • How do you tether a dslr in elements 11?

    How do you tether a dslr in elements 11?

  • Invoicing plan and framework order

    Dear All SAP Gurus, I am very new to this scenarios .I just read about invoicing plan and FO document type, through that I understand that FO purchase order and MRIS are linked. Still I am very confused about this . My ideas are not clear what is fra

  • Exit and Reset Buttons

    Hi i'm trying to make the exit and reset buttons work. Everything works exept for these two and I do'nt understand why. import java.awt.*; import javax.swing.*; import java.awt.event.*; public class PuntenInterface extends JFrame implements ActionLis