Problems with HowTo "Creation of BI Master Data in Integrated Planning...)
Hi,
one of our customers need a planning application in which he can create master data for different attributes, insert some key figures for this attributes and changes already planned key figured.
For the last two point I've already found a working solution, the first point (creating of masterdata in web template) is still a problem. After a little search, I found a howto-guide "Creation of BI Master Data in Integrated Planning (IP) through Web Layouts", in which the necessary steps are described, how to do this (please see following link: http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/607193d5-cdd5-2b10-c699-8ff04c3124f6)
Does anyone of you know this guide and was able to build a working solution?
I have different questions, maybe you could help me:
- what kind of variable is he using?
- do I need a DataProvider in Web Template?
- how do I get the connection to the used variable in the button group?
Thanks for your help.
Regards
Tim
Hi Timo,
you require two howtos to implement the solution.
First, please take a look at the first document:
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/10d2b273-0e12-2c10-fab3-a34bde559f92?QuickLink=index&…
In chapter 3 you see the prerequisites (note 1101726 and notes 1384495, 1387004 and 136772). By this, you change the system behaviour, not to check if the new inserted master data is valid (it can't be valid, because the entries are new!)
And after this please implement the solution from the how to.
Furthermore you can take a look at this how to, which might help you too:
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/607193d5-cdd5-2b10-c699-8ff04c3124f6?QuickLink=index&…
Even if my first post is a bit old, my customer still uses this solution, at the moment we are on 7.3 sp06, so it is working in newer releases too.
Hope this helps.
Regards
Tim
Similar Messages
-
Problem with the creation of asset master record
Hi Gurus,
i am having problem in creation of a new asset master with the use of existing man asset number and different asset sub number. I am trying to create the asset in the same company code but different depriciation area, but the system is not allowing me to do that. Is there a setting in the SPRO by which I can allow the use of creation of the asset number by using the already existing asset number with the new asset sub number. This is actually happening in the system for one type of equipments but not for other.
Can any one tell me what settings are to be made to allow this for all containers.
Thanks in advance
Anoop SharmaHi,
A sub asset master can be created with AS11 only.
You cannot create a asset sub number under a main asset number, in the case, where different set of dep areas needs to be maintained.
When you create a sub asset, all the dep areas will be copied to sub asset's master from main asset master. Since this set of dep areas cannot be different from main asset to sub asset.
Hopw you understood this.
Thanks,
Srinu. -
Creation of Tech Master data with CRM IC Web Client
Hi Experts,
I have a query regarding creation of Technical master data via CRM IC Web client ( CRM7.0 & ECC6 for ISU)
1) If we are using CRM IC web Client then , how the creation of Technical Master Data is triggered from web client ?
2) Where the technical master data created first ISU or CRM ?
If anyone has the info on this please let me know.
regards,
SagarHi Sagar Arvind Phirke,
1) You need to configure CRM Middleware to exchange data between CRM and IS-U;
2) Data is created first in CRM, then it's replicated to IS-U.
Check this helpful documentation: http://help.sap.com/saphelp_crm70/helpdata/en/46/66235fc77c453a8696f76c66e8014c/frameset.htm
Best Regards,
Pedro Nunes -
Error during create CR for MDGC "Enter a relevant role for creation of customer master data"
Hello Experts,
I am unable to create a Customer CR in 'MDG 6.1 Customer UI' , the UI throws an error saying "Enter a relevant role for creation of customer master data".It looks like it is expecting me to mention the BP role ( like FLCU01 Customer or FLCU00 FI Customer ) , but I don't see that BP role section in the Customer UI to mention .
While creating the vendor CR , I am able to enter the BP role ( like FLVN01 vendor or FLVN00 FI Vendor ) in the UI BP Role section.
Following are the UI's for Customer and Vendor
Customers BS_OVP_BP: BS_OVP_CU > OVP: BS_CU_OVP - I do not see BP role section here.
Vendors BS_OVP_BP: BS_OVP_SP > OVP: BS_SP_OVP - This is working fine , I see BP role section here.
Please advice what I am missing here , what should I do for the successful CR creation . Should I change the UI for Customers or do I need to do anything in CVI configuration.
Thanks,Hi Abdullah,
You were right in the first place the UIBB is missing , the UIBB 'Role' was present in the 'Search Customer' page but not available in the 'Create Customer CR' page , so I created the 'Role' UIBB again and was able to create the CR now . Not sure how it got deleted in the first place , is there any options where we reset the UI screen to the default initial configuration
But after approving the CR , only the Business Partner BP is getting created and the Customer is not getting created . Not sure what might be the issue now. Is there any config that tells to automatically create customer when BP is created. I was able to create Vendor using the create Vendor CR before.
Thanks -
Auto creation of Batch master data when external batch no entered in PR
Dear All,
At persent we can auto create batches at production order creation level, Goods receipt level.
In same way how we can achive auto creation of Batch master data at Purchase Requisition level.
Regards,
ManojThere is no auto-creation of batches that are entered in ME51N. SAP issues message ME178 telling you that the batch entered does not exist.
You have to maintain the batch in MSC1N first, then you can enter it in the PR. -
Have problem about grant assignment in Student Master Data
have problem about grant assignment in Student Master Data
i want to change grant detail in Student Master Data when i choose disbursement type to Pay Fixed Amount
and then go to Grant Evaluation Run it have result
But when i choose another disbursement type such as
1. Pay Up To a Certain Percentge
2. Pay Certain Percentage Up to a Certain Amount
3. Pay Up to a Certain Amount
and go to run Grant Evaluation it can run but not have result
I need help T_T i don't know why i can't change or i miss somethinghello experts,
Our problem is still not fixed, but we have contacted SAP to have a look at this problem. In the mean time we have created a new way to calculate the grants by doing no check at all, because our client don't want to have prerequisites yet.
Therefor we made a custom function module from PMIQBP_GR_COND_EVALT_01. If the boolean ev_xok is true the system will calculate and post the grant amount.
Good luck and I'll keep you posted.
Kind regards,
Steve de Klonia -
I have downloaded the latest version of icloud control panel to a PC with Windows 7. My "master" data is always on my PC. With other synch software I always select "One Way Outlook to Device". I synched icloud with Outlook and it has trashed my Outlook with duplicate contacts. Is there a solution. Is there selective synchronisation available?
Make sure you don't have any notes that have no content or subject or this can prevent syncing with Outlook. If you do, delete them.
If you don't, try unchecking "Mail,Contacts,Calendars & Tasks with Outlook" on the iCloud control panel for Windows, choose Delete at the prompt (the data will still be in iCloud), restart your PC, then go back and check this setting again. (Your iCloud data will reappear in Outlook after a brief delay as it redownloads.)
Then create a new note on one of your iOS devices and see if it appears in the Notes folder in Outlook mail after a few minutes. -
Today, I experienced a problem with my mail. the time and date on each email received and sent is 18.06 and date as 22nd July. Thank you John
Incorrect date or time displayed in various applications
-
LSMW problem with Partner functions in Customer Master
Hi All,
Requirement is to load the Customer Master Data using LSMW.
Loading General data is ok, But when I am planning to load the
partner function using the recording method in LSMW, How do I upload
more than '1' Ship to party partners and more than '1'
Bill to party partners using LSMW.
Normally in table control there is a "+" button at the end of the
table control which when pressed enters one line in table control,In
Partner function screen , there is no such button available, so how
can I determine which line am I supposed to enter data using LSMW.
One partner can have multiple no of BP and SH partners like more than 10
of both types. How do I upload these partner functions in SAP using LSMW?
Regards,
AjayThat a customer master has several business partners is just usual, a customer can have as well several company codes and sales areas. So where exactly is the problem?
Most problems come with recordings, recordings should be the last option, not the first.
What import method do you use? -
Creation of Customer Master Data
Hi
I have problem with Customer Number range, Created external number Range for customers With number interval
'SA1 to SA10000000' ,Then when i am creating customer master data it is accepting only some number like SA1, SA10, SA100, SA1000 .... like this .
My problem is why it is not accepting all the numbers like SA1, SA2, SA3, SA4.............. SO ON any body please help me
Thanks in advance,
Regards
PrabhakarHi, because SA2 is out of this range! SAP checks available rang according with sorting. If you take value SA1,SA10000000,SA2 and sort it:
SA1
SA10000000
SA2
So it's out of range -
Weird Problem with Add Row Button in Master Detail Page
I have a page that was created with a Master Detail Wizard. When I click the Add Row button on our Production Environment, the row counter increments BUT no blank row shows on the screen.
In our Development Environment, when I click the Add Row button, a blank row appears as expected. Thinking there was some problem with the production app, I exported the Dev version and imported into Production. Still no blank row.
Thinking perhaps it had something to do with the data, I copied our production application data back into the development application tables. Still, the development app creates the blank row where the production version does not.
I even used the same browser window for both environments and still get the same results. This was working fine in production then just stopped one day.
The only clue I have is that the Add Row WILL work if the Master Record has no details or less than a page worth. It seems to happen when the detail records are more than one page worth. Also, when I click the Add Row button, it goes to the last page of the list (say three pages of 10, 10, 6) but no blank row shows up. Again, works fine in the development environment no matter how many pages.
Any ideas or suggestions why this is happening? Could there be some environment setting that is causing this to happen?I have a page that was created with a Master Detail Wizard. When I click the Add Row button on our Production Environment, the row counter increments BUT no blank row shows on the screen.
In our Development Environment, when I click the Add Row button, a blank row appears as expected. Thinking there was some problem with the production app, I exported the Dev version and imported into Production. Still no blank row.
Thinking perhaps it had something to do with the data, I copied our production application data back into the development application tables. Still, the development app creates the blank row where the production version does not.
I even used the same browser window for both environments and still get the same results. This was working fine in production then just stopped one day.
The only clue I have is that the Add Row WILL work if the Master Record has no details or less than a page worth. It seems to happen when the detail records are more than one page worth. Also, when I click the Add Row button, it goes to the last page of the list (say three pages of 10, 10, 6) but no blank row shows up. Again, works fine in the development environment no matter how many pages.
Any ideas or suggestions why this is happening? Could there be some environment setting that is causing this to happen? -
Some problem with IDoc's Settings while loading data
Hey Experts,
Previously i tried data loading using LIS & LO, but i was not able to load data, i was taking it as some transfer structure problem.
But just today i tried to load Master Data, and its displaying the same error. I feel its something related to IDoc/Basis settings, please see the below wrror described and try to help.
<b>Error when updating Idocs in Business Information Warehouse
Diagnosis
Errors have been reported in Business Information Warehouse during IDoc update:
Could not find code page for receiving system</b>
When i am checking the details its saying:
Transfer (IDocs and TRFC): Missing messages or warnings ,
Request IDoc : sent, not arrived ; Error passing data to port.....
Please suggest the solution?
Thanks.....Hey Roberto,
in the details tab of RSMO, before that IDOC, i m getting this error message also:
1. Requests (messages): Everything OK
1.1 Data request arranged
1.2 Confirmed with: OK
2Extraction (messages): Missing messages
2.1Missing message: Request received
2.2Missing message: Number of sent records
2.3Missing message: Number of sent records
after that its
Transfer (IDocs and TRFC): Errors occurred
If it can add something extra in getting the solution.....
Message was edited by: BI Project -
Problem with mass IDoc for Material Master
Hi All,
Can anyone suggest a solution to work with mass IDocs for Material master?
We have DEBMDM and CREMDM as mass capable IDocs for Customer and Vendor. How do we get mass Material Master IDocs from R/3 in a single XML file?
Also the standard Material repository supplied with SAP MDM 5.5 SP3 doesn't have any XSD definition for MATMDM. Can anyone throw some light on this problem?
Regards
PoojaHello Pooja:
The standard way to do it is to generate a single file containing multiple idocs (And for the sake of performance, I suggest you stick to this technique).
In the case of material master, everything is straight forward. In the case of customer and vendor master, when data flows from R/3 to MDM no idoc conversion needs to be performed by XI.
However, for the case of customer and vendor master, when data flows from MDM to R/3, XI needs to separate the data in CREMDM to CREMAS and ADRMAS in order for R/3 to be able to process the idocs; as well as separate the data in DEBMDM to DEBMAS and ADRMAS.
The good thing is that you do not need to worry about all this mappings and conversions in XI. The only thing you need to do in XI is to import the standard business content for SAP MDM 5.5 into XI.
Hope this helps.
Regards,
Jorge. -
Error with regard to Compounding in Master Data
Hi All,
I am having a problem with a Master Data Info Object. I am actually adding a Compounding attribute to the Master Data Info Object. But when i am activating it is giving an error message "Concatenated values used in documents for master data". I am having no clue on this. Please help me put on this issue.
I gaurantee full points to the answer(s) which help me resolve this.
Thanks in advance,
Sudeep.Hi,
Kindly check if you have created any documents for the master data infoobject(ZDEPTID),or the compounding attribute(ZSETID).
If so..first delete the documents.
Activate the infoobject and then create the document once again.
Assign points if this helps!
Regards,
Dhanya -
Creation of Assets master Data
Dear All,
Now we need to upload master data for Asset materials, which we are treating as UNBW Mat type (Non valuated materials). If we want to sell it after 1 Year & then what is the procedure ? In UNBW mat type there is no sales views maintained.
pls exp me
regds,
Channahi,
Do try to create the new material type with your specified view, you may also copy the exisisting the mataerial types, so that the you can get few of the default settings automatically and for few you can make changes...
Regards
Priyanka.P
Maybe you are looking for
-
Premiere 5.5 won't load-Mac
Was using Premiere last week and all was fine. Took a week vacation and now Premiere won't even load-no hardware or software changes to the computer. Boot seems to stall out at 'Loading ExporterQuickTimeHost.bundle' see photo. Any ideas?
-
How can we protect/hide our Business Catalyst-based website from the public and search engines while we are developing it? It seems like anyone can access it, even though it is not complete. We are using Dreamweaver to build our website, if that help
-
Change of primary email on BT account
Hi I would like to change the primary email on my account, replacing it with one of the sub-accounts. I would be grateful for help in this.
-
Dynamic selection of query in data-model
I have a report which has 3 disjoint queries in its data model. I have a lexical parameter (:p_where) for all the queries. In the afterform trigger, based on another parameter (:p_type) i am having the where clause built and assigned to the "where le
-
Aperture or iPhoto. New iMac
Aperture or iPhoto. New iMac