Problems with HP J6480 printer AND OX 10.6.5 update !!

I've been posting this problem .. more information for folks to help problem shoot ...
I re-installed the HP driver : no help
I changed from "standard" print to "fast draft" -- fast draft works pretty consistently -- but just moving back to "standard" brings back the problem -- printer pauses, and will not print/crashes.
moving back to "fast draft" --- page printed.
Any one have an idea of why this might be ??
How can this particular problem/definition be submitted to Apple (officially) ??
Thanks.
Donnie C

Solution found for me. From Adobe Acrobat & Reader 9.1 Release Notes:
Roaming Profiles on Windows and Networked Home Directory on Macintosh
are not supported configurations for 9.0 or 9.1, however we have made
several fixes in 9.1. We are looking at the possibility of supporting
this for the next major release.
As I am working with roaming profiles, my current solution (which is no solution at all) is to wipe current and reinstall Acrobat/Reader 8. Among other things there are supposed console hacks to make the purchased Adobe software run at all in a group work environment. I will end up trying them later.
Some good reads are :
http://forums.adobe.com/thread/300660
http://forums.macrumors.com/showthread.php?t=198512
http://forums.adobe.com/thread/391738?start=150&tstart=0
http://serverfault.com/questions/37805/adobe-reader-wont-launch-when-logged-into-network-u ser-accounts-open-directory

Similar Messages

Problems with Epson R2400 printer and Mac

I'm a photographer and I switched to an imac a while ago. When I tried out my Epson R2400 printer, it worked really awful, comparing to when I used it with PC. I still haven't managed to fix these prolems. The printer menu is diminished (less options, many inaccessible in grey), there are problems with print density, with color adjustment, what I see on my screen is not what I get on my print (a black and white photo in grayscale mode can appear almost light blue when printed), there are even alignment problems (centred photos appear closer to the left edge of the paper). And I don't have a clue why all this is happening. The printer driver I installed is apparently the latest one. So I don't know where to go from here. I have installed and I use the profiles of the specific papers I'm using, but the results are NASTY. Please help.

By the way, I have read the links under "More like this", but those threads don't seem to clarify my question. Originally I had installed my Epson driver from the original (old) Epson CD. When that didn't work I uninstalled and installed the newer Epson driver from the Epson's site. Doesn't work and the problems I'm having are the ones I mentioned above.

What is going on with all the ads lately? I do not have this problem with Chrome or IE and I have done the update.

I've been a big fan of what you guys are doing for a long time but can not stand using the browser lately due to the pop ups everywhere. It makes me question the whole "Proudly Non-Profit" thing.

Do you have the pop-up blocker enabled?
orange Firefox button ''or'' classic Tools menu > Options > Content
Is there any pattern to the ads?
In case it's a rogue add-on, could you disable all nonessential extensions here:
orange Firefox button ''or'' classic Tools menu > Add-ons > Extensions category
After restarting Firefox, do you notice any different in the number or type of pop-ups?

What is the problem with Western Digital HDD and OS X.9?

I received an email from Western Digital saying that OS X.9 could cause my files on my WD drives to be erased and to unplug all my WD drives until a fix is done. Is this a real problem and if so when will Apple get the fix out. I have joibs I have to get out to clients and this is a major problem for me.

Western Digital has found that their applications have got serious compatibility problems with OS X Mavericks, and they have to be updated to make them compatible with Mavericks.
Until then, keep the OS X version you have got. This is a Western Digital problem and this is why your main computer shouldn't be upgraded just after the release of a new Mac OS X version

Communication problem with Adobe 9.0 and HP Printer when I scan

I'm having a problem getting a .pdf file to come up when I scan from a HP 5610 All-in-one printer. Have uninstalled and reinstalled HP software three times but when I scan and want a pdf file it won't communicate with Adobe 9.0 reader for some reason. Is there a setting in Adobe reader that's a problem?
Thanks.

Thanks...found out that an HP5610xi All-in-One will not completely communicate with Adobe 9.0 Had to go to Adobe 6.0
Date: Thu, 17 Dec 2009 03:19:49 -0700
From: [email protected]
To: [email protected]
Subject: Communication problem with Adobe 9.0 and HP Printer when I scan
May be that the HP software doesn't support Adobe Reader 9.
>

Wireless printing problems with 10.5.4 and Epson printers

Anyone else know about problems with Epson printers such as this no longer functioning wirelessly with bonjour once upgrade to 10.5.4? It appears they are not supporting this with a new driver yet?
At this time, Epson says they have no drivers for 10.5 and this specific printer but wondered if there are more general problems with 10.5.4 and bonjour with Epson or others?
Thanks
Paul
MacBook Pro Mac OS X (10.5.4) Using Epson CX11-NF printer

I have 5 computers-G4 PowerPC, two G4 12" laptops, G5 Mac Pro dual, Macbook Pro--with the older computers all running 10.4.11, the new ones 10.5.4. Until Friday, I was able to print with all of them to an Epson Stylus Photo R200 via Airport Extreme. After installing software for my new G3 iPhone on the G5 Mac Pro the printer connections on all the computers stopped working. I have so far been able to get the G4 Power PC to print, but none of the others. I have tried Bonjour, Gimp-print v.5.0.0-beta 2, cleared all the print drivers and restarted, and everything else I have been able to find on both Epson and Apple sites. The Printer Set Utility described by Epson does not exist in Leopard machines, and doesn't work for the older laptops. As soon as I select one of the printers in the "selected printer in print dialogue box" it grays out. I have set up sharing on the G4Power PC that does print, but it is not accessible--it shows up but is grayed out. There is a diamond next to the printers in the Print dialogue box in applications' menus, but it still doesn't work. It either cannot make the connection, cannot find the printer, or keeps spinning with the message that it is finishing printing (but it hasn't even started.) Again, everything worked fine until the new iPhone was added to the mix. My old iPhone didn't cause any problems. This is really a problem. Any suggestions welcome.

Problems with your HP printer after upgrading to Windows 8.1

If you are experiencing problems with your HP printer after upgrading to Windows 8.1 please click on the below link and install the HP Print and Scan Doctor and run the utility to fix the issue.
www.hp.com/go/tools.
I was an HP employee
If I have helped you solve your issue please mark it as solved
**Say Thanks By Clicking on the Kudos Star**

Hi.....my laserjet 1536dnf mfp was working perfectly with win 8 pro....then I installed win 8.1 pro and now the computer ,which is part of a network,can not communicate with the scanner of the printer--it prints just fine. On another computer (running win 7 ) on the same network, the scanner and all other printer functions work just fine.
I have tried installing the latest drivers from HP......scanner still not "communicating" with computer.....also temporarily disabled firewall.....please help...all the best -David G (gossat)

WIndows 8.1 printer error: windows cannot print due to a problem with the current printer set up

My HP OFFICEJET 8500 PRO was working just fine wirelessly until I installed the Windows 8.1 update from the Microsoft. Now I cannot print at all. I get an error that says, "windows cannot print due to a problem with the current printer set up". I have tried reinstalling and a ton of other solutions to no avail. Can someone PLEASE Help!

Hello there, @jesseangelique ,
Welcome to the Community!
I would love to help you with the printing issue you're having, since the Windows 8.1 that was done.
Please run the Print and Scan Doctor. Write me back with the results or post a screen shot of the results and I will have a look at them.
This diagnostic tool will check for any conflicts that could be causing the issue. The tool will show you a report at the end. If there was a problem that the tool could not fix, you will notice it in the results.
Also, let me know which Officejet 8500 Model you have:
HP Officejet Pro 8500 All-in-One Printer - A909a
HP Officejet Pro 8500 All-in-One Printer - A909b
HP Officejet Pro 8500 Premier All-in-One Printer - A909n
HP Officejet Pro 8500 Wireless All-in-One Printer - A909g
Hope to hear from you!
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

Problem with countinuous paper printing in dot matrix printer

Hi All,
I have problem with dot matrix printer (Devise Type EPESCP) while printing continuos printing. If i am printing 2 or more than that prints at a time, 2nd page is printing 5 lines up.
I have developed one smartform for this and i have used A4 size page format.
I have tried to change the Printer initialization code to 86 lines for DINA4. Still no change in continuous printing.
     Printer initialization
     Reset after exit
     Cover page
     First Page
     Start of even page
     Start of odd page
     Start of page
     End of first page
     End of even page
     End of odd page
     End of page
     Start of line on an even page
     Start of line on an odd page
     Start of line
     End of line on an even page
     End of line on odd page
     End of line
Printer initialization
# reset
\e\0x40
# select character table 3 -> PC 437 character set
\e\0x74\0x03
# set line spacing 6 LPI
\e\0x32
# set page length 86 lines
\e\0x43\0x46
# cancel bottom margin
\e\0x4F
# set left margin to 0
\e\0x6C\0x00
# select LQ quality
\e\0x78\0x01
# select non-proportional spacing
\e\0x70\0x00
Can any one help me.
Thanks,
Vishnu

Hi Vishnu,
Above you have the following commands:
set line spacing 6 LPI
\e\0x32
set page length 86 lines
\e\0x43\0x46
46 HEX = 70
So the above settings mean 70 lines at 6 LPI = 11.66 inches.
So is the paper length 11.66 inches? If not, you should adjust the settings accordingly.
Regards,
Aidan

Problem with Photoshop Elements Printing

I have been using Photoshop Elements for a couple of years now and know it pretty well. Today while attempting to print, a strange problem came up: After going through the protocol to make a print, just before the image prints PE does a very fast auto correction that basically ruins all the color correction I have made on the image. How do I disable this function?

Hi and thanks for your reply. I checked the settings under "Print", "More Options", then "Color Management" and it only has "Print Space", none of the three options that you said I should have. Am I looking in the wrong place?
Date: Mon, 3 Sep 2012 11:14:57 -0600
From: [email protected]
To: [email protected]
Subject: Problem with Photoshop Elements Printing
    Re: Problem with Photoshop Elements Printing
    created by 99jon in Photoshop Elements - View the full discussion
Check your color management by clicking More Options in the print dialog There are basically three options:1) Printer Manages Color2) Elements Manages color3) No color Management Make sure everything is consistent e.g. if you choose Elements manages color make sure color management is switched off in the print driver.
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4669848#4669848
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4669848#4669848. In the Actions box on the right, click the Stop Email Notifications link.
     Start a new discussion in Photoshop Elements by email or at Adobe Forums
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

Cannot print due to a problem with the current printer

Cannot print (anymore) due to a problem with the current printer is the message I get every time I try to print something out. I tried to reinstall the printer's software, I changed the cables, but nothing happened. It seems to be something related to the printer setup utility. Any big idea on how to solve this? I was printing without problems until this afternoon. I have a HP Laserjet 1022 and sometimes I use Adobe Acrobat Writer. None is currently working.
Thanks for any help.
Power Book G4 Mac OS X (10.3.9)

I just had the opererational system (10.3.9) reinstalled . Back to normality again.

Problem with the MVMapView.print(printMapDiv,) function.

Hello,
I have a problem with the MVMapView.print(printMapDiv,) function.
My FOIs are displayed correct on the screen but on the printed letter
the stroke(border) color and the labels of a circle are not displayed.
the fois have a custom style:
var xmlDef = '<svg width="1in" height="1in">'+
'<g class="marker" '+
'style="width:40;height:40;stroke:0xff0000;fill:0x00ff00;stroke-width:1.5">'+
'<circle r="20"/>'+
'</g>'+
'</svg>';
markerStyle = new MVXMLStyle("my_vector_icon_" + i + '_' + j, xmlDef)
and are created like this:
v_result = new MVFOI(p_geofeature.foiId, p_geofeature.foiGeomertyObject, markerStyle, null, 30, 30);
v_result.setHTMLElement('1',0,0);
Browser: I can see the map with a green circle, a red border and '1' as a label on
top of the Circle.
Printed Letter: I see the map with the green circle but no red border Color and no label.
The implmentation of the printing function uses the same techique like the "Oracle Maps Tutorial"
It is a javascript function called through a href link:
function mapPrint()
var a=document.getElementById("printmap");
global_gdi.mapviewer.mapview.print(a);
Version is Ver11_1_1_5_B110527
Does anbody know how to print the map properly including the contents of the
MVFOI class set trough setHTMLElement function?
Greetings
Andre

Thanks for your reply but it is not working and i can prove that.
I have a small example based on the mapviewer print tutorial. To run it you need a
mapviewer installation and copy the text into a html file. In the browser you can see
a green point with a red border and red label text on a map.
If you use the print button everything except the label text will be printed.
I think this is a mapviewer css-api bug.
<html>
<head>
<META http-equiv="Content-Type" content="text/html; charset=UTF-8">
<style type="text/css">
@media screen
.noscreen {display: none;}
@media print
.noprint{display: none;}
</style>
<script language="Javascript" src="/mapviewer/fsmc/jslib/oraclemaps.js"></script>
<script language=javascript>
var mapview;
var baseURL = "http://"+document.location.host+"/mapviewer";
function showMap()
mapview = new MVMapView(document.getElementById("map"), baseURL);
mapview.addMapTileLayer(new MVMapTileLayer("mvdemo.demo_map"));
mapview.setCenter(MVSdoGeometry.createPoint(-122.45, 37.6706,8307));
mapview.setZoomLevel(4);
mapview.display();
//adds custom foi with label
var xmlDef = '<svg width="1in" height="1in">'+
'<g class="marker" '+
'style="width:40;height:40;font-family:sans-serif;font-size:20pt;stroke:0xff0000;fill:0x00ff00;stroke-width:1.5">'+
'<circle r="20"/>'+
'</g>'+
'</svg>';
var markerStyle = new MVXMLStyle("my_vector_icon_", xmlDef);
mpoint = MVSdoGeometry.createPoint(-122.30, 37.73,8307);
var v_result = new MVFOI("11", mpoint, markerStyle, null, 60, 60);
v_result.setHTMLElement('test label',0,0);
mapview.addFOI(v_result);
function mapPrint()
var a=document.getElementById("printmap");
mapview.print(a);
</script>
</head>
<body onload=javascript:showMap()>
<div id="map" style="position:absolute;top:50px; left:10px; width:600px; height:450px;border:0px"></div>
<div id="printmap" class="noscreen"></div>
<p>Please click <a href="javascript:mapPrint()">here</a> to print map</p>
</body>
</html>
Edited by: user12005064 on 27.02.2012 02:37

I downloaded a new version of firefox. It said it had problems with my norton toolbar and now it doesn't feature it in the window. I'm not that comp savvy. How do I either get the Norton toolbar up or go back to the old firefox? Thank you.

I downloaded a new version of firefox. It said it had problems with my norton toolbar and now it doesn't feature it in the window. I'm not that comp savvy. How do I either get the Norton toolbar up or go back to the old firefox? Thank you.

Please authorize ADE 3 with same credentials that you used with older version of ADE

After having yet another problem with my MacBook Pro and having to wipe the drive, I am now unable to sync my iPhones etc without erasing all the music on them. Is there a way around this? I have no other library!

After having yet another problem with my MacBook Pro and having to wipe the drive, I am now unable to sync my iPhones etc without erasing all the music on them. Is there a way around this? I have no other library!
iTunes is a mess! It couldn't find it's own libraries and I was forced to create a new one. Now I don't know where my music is or if any's missing.

columbus new boy wrote:
How crap is that?
It's not crap at all.
It's not that simple. For example, I've 3500 songs on my MacBook but don't want them all on my phone, so I have to manually select each song again???
There has to be a solution.
Why not simply make a playlist with the songs you want on the iPhone?
and maintain a current backup of your computer.

I tried downloading a free app and it asked for my billing information and when i entered it, it says that there was a billing problem with a previoud purchase and i have to update it. I keep updating it and it wont let me verify it and i cant get apps

I tried downloading a free app and it asked for my billing information and when I entered it, it said that there was a billing problem with a previous purchase and I have to update it. I keep updating it and it wont let me verify it and I cant get any apps even if they are free, and I just Deleted some apps to make room for my new upate!

The message says: "The payment method has been denied, try another method"
I'm living in the same country and city since I was born, so I don't think the location is the problem.
And yes, I paid with the card a meal in Burguer King today. And nothing more.

Problems with HP J6480 printer AND OX 10.6.5 update !!

Similar Messages

Maybe you are looking for